I need help with this won’t take too long

To estimate the sample size required for estimating the proportion of college students who are working while going to school with a desired accuracy of 4% at a 90% confidence level, we can use the following formula:

n = (Z^2 * p * (1-p)) / (E^2)

where:

n is the sample size

Z is the Z-score corresponding to the desired confidence level (90% confidence level corresponds to a Z-score of 1.645)

p is the estimated proportion (or expected proportion) of the population

E is the desired margin of error

Given:

Desired accuracy (E): 4% or 0.04

Confidence level (Z-score): 1.645 (corresponding to 90% confidence level)

Estimated proportion (p): 0.40 (or 40%)

Plugging the values into the formula, we get:

n = (1.645^2 * 0.40 * (1-0.40)) / (0.04^2)

n = 0.1239 / 0.0016

n ≈ 77.4375

Rounding up to the nearest whole number, the estimated sample size required to achieve the desired accuracy is 78.

So, a sample size of at least 78 college students would be needed to estimate the proportion of college students who are working while going to school with a margin of error of 4% at a 90% confidence level, assuming an estimated proportion of 40%.

a. A best-fit line is close to most of the data points.

Best-fit lines help show trends or correlations in data

Best-fit Lines

Best-fit lines attempt to create a line that is close to most data points. This line is a function that can be used to estimate data points that are not a part of the original data set. Additionally, best-fit lines will show the trend of the data. For example, if the slope of the best-fit line is constant, then the data points are directly proportional.

Common Misconceptions

Although best-fit lines can be extremely accurate and helpful, they are not perfect. A best-fit line will attempt to minimize the distance between the line and data points, but it will rarely be perfect. In most cases, there is no way to write a line that will perfectly describe the exact coordinates of each data point.

Additionally, data sets can have any type of correlation. It does not need to be proportional or positive. This means that the slope of a best-fit line can be anything.

Finally, as aforementioned, best-fit lines try to fit the data as much as possible. However, this does not mean that the line has to go through any data points. It is possible for best-fit lines to not go through any data points at all.

Answer: Using the given information and the formula ab = cd, we can write:

d = (ab) / c

We are given b = 12 cm and c = 6 cm. To find ab, we can use the Pythagorean theorem:

a^2 + b^2 = c^2

where a is the unknown length we want to find. Substituting the given values, we get:

a^2 + 12^2 = 6^2

a^2 + 144 = 36

a^2 = -108 (which is not a possible solution)

This means that the given values do not form a valid triangle. Therefore, we cannot find the length of segment d using the given information.

Step-by-step explanation:

The amount of their pay per hour is $55.5

The given parameters that will help us to get the amount are.

Louise repaired a computer for each hour she works and we're paid 1165.50

The question reads that if Carla work for 12 hours and Louise work for nine hours

this implies that 12x + 9x = 1165.50

This implies that 21x = 1165.50

Dividing both sides of the equation by 2 to get

21x/21 = 1165.50/21

x = 55.5

So, their  their pay per hour is $55.5

Learn more about hourly payment on https://brainly.com/question/17347088

#SPJ1

Seasonality may be less of a problem for annual data frequency as there may be less variation due to the longer time interval.

Annual data frequency refers to data that is collected and reported on an annual basis. This means that the data points in the dataset represent a full year's worth of data, with one data point for each year. Annual data is often used in economic indicators, such as gross domestic product (GDP) or unemployment rates, and can provide insights into long-term trends and changes over time.

GDP stands for Gross Domestic Product, which is a measure of the total value of goods and services produced within a country's borders during a specific time period, typically a year. It is used as an indicator of a country's economic health and growth. GDP is calculated by adding up the total spending on consumption, investment, government spending, and net exports (exports minus imports) during the period.

Seasonality may still be a problem for data frequencies of monthly, weekly, daily, and quarterly as certain patterns or fluctuations may occur within each of these time intervals. Seasonality may be less of a problem for annual data frequency as there may be less variation due to the longer time interval.

To know more about the GDP visit:

brainly.com/question/15899184

#SPJ1

The result of the operation 3a²-ab-2b² and 2a² +5ab "-3b² is

4a² + 7ab - b².

What is an algebraic expression?

An algebraic expression is a mathematical phrase that contains variables, constants, and mathematical operations. It may also include exponents and/or roots. Algebraic expressions are used to represent quantities and relationships between quantities in mathematical situations, often in the context of problem-solving.

Let's simplify the expressions and then perform the given operation:

3a² - ab - 2b² + 2a² + 5ab - 3b² - (a² - 3ab - 4b²)

Combining like terms within parentheses:

3a² - ab - 2b² + 2a² + 5ab - 3b² - a² + 3ab + 4b²

Combining like terms outside parentheses:

4a² + 7ab - b²

Therefore, the result of the operation is 4a² + 7ab - b².

To learn more about algebraic expression from given link:

https://brainly.com/question/19245500

#SPJ1

Answer:

  -3

Step-by-step explanation:

You want the graphical solution to x² +6x +9 = 0.

The graph of the expression on the left shows it has a value of 0 when x = -3.

The solution is x = -3.

__

Additional comment

A graphing calculator is very helpful when you want a graphical solution.

If you want to graph this by hand, you can rewrite it as ...

  (x +3)² = 0

The graph of (x +3)² is a graph of the parent function y = x² after it has been shifted left 3 units. The graph will go through points (-5, 4), (-4, 1), (-3, 0), (-2, 1), (-1, 4). Of course the point at (-3, 0) indicates the solution is x=-3.

The combination of angle measures that could form a triangle are (a) 22, 140, 18 degrees and (c) 55, 67, 58 degrees.

In a triangle, the sum of the three interior angles is always equal to 180 degrees. Therefore, if the sum of the given angle measures is equal to 180 degrees, they could form a triangle.

For option a) 22 + 140 + 18 = 180, so the given angles could form a triangle.

For option b) 72 + 92 + 46 = 210, which is greater than 180, so the given angles could not form a triangle.

For option c) 55 + 67 + 58 = 180, so the given angles could form a triangle.

Therefore, the correct options are (a) 22,140,18 degrees and (c) 55,67,58 degrees

Learn more about triangle here

brainly.com/question/14611583

#SPJ4

The given question is incomplete, the complete question is:

Identify the combination of angle measures that could form a triangle

a) 22,140,18 degrees

b) 72,92,46 degrees

c)  55,67,58 degrees

The standard form expression that represents the amount of border material Jessica will need is 2L + 2W - 2x - 2y = -2B

To create this expression, we need to consider a few things. Firstly, we need to know the length and width of the solar panels. Let's say the length of the solar panel is L and the width is W. We also need to know the width of the border that Jessica wants to add. Let's call this value B.

The total amount of material needed for the border will be the sum of the material needed for the four sides of the solar panel. Each side will need a length of B, so the total length of the material needed will be 2B + 2L + 2W.

However, we can simplify this expression by putting it into standard form. Standard form expressions are written in a specific way that makes them easier to read and work with. In standard form, the expression is written as Ax + By = C, where A, B, and C are constants and x and y are variables.

To put the expression 2B + 2L + 2W into standard form, we need to group the variables together and move the constants to the other side of the equation. This gives us the expression 2L + 2W - Ax - By = -2B, where A and B are both equal to -2, and C is equal to -2B.

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

Answer:

8c^2 + 24c - 6

Step-by-step explanation:

I got it right on edmentum

S is a subspace of the vector space V.

For four conditions are satisfied,

The set S is a subspace of C3(1)

The set S is a subspace of Mn(R)

The set S is a subspace of C2(I)

The set S is a subspace of [tex]R^n[/tex]

The set S is not a subspace of P5(R) because it is not closed under scalar multiplication.

If p(x) is a polynomial in S, then 2p(x) may not satisfy the condition. [tex]p(1) > p(0).[/tex]

The set S is a subspace of C3(1).

The differential equation [tex]y\prime\prime\prime + 2y = x^2[/tex] is linear and homogeneous, so the sum of two solutions is also a solution, and a constant multiple of a solution is also a solution.

S is closed under linear combinations.

The set S is a subspace of Mn(R) because it is closed under addition and scalar multiplication.

If A and B are skew-symmetric matrices, then[tex](A + B)^T = A^T + B^T = -A - B = -(A + B), so A + B[/tex]is skew-symmetric. Similarly, if c is a scalar, then [tex](cA)^T = cA^T = -cA, so c A[/tex] is skew-symmetric.

S is a subspace of C2(I) because it is closed under addition and scalar multiplication.

If y1 and y2 are solutions to[tex]y\prime\prime - 4y\prime+ 3y = 0, then y1\prime\prime - 4y\prime + 3y1 = 0[/tex] and [tex]y2\prime\prime - 4y2\prime + 3y2 = 0[/tex].

Adding these equations gives [tex](y1 + y2)\prime\prime - 4(y1 + y2)\prime + 3(y1 + y2) = 0,[/tex] so [tex]y1 + y2[/tex]is also a solution.

Similarly, if c is a scalar, then [tex](cy)\prime\prime - 4(cy)\prime + 3(cy) = c(y\prime\prime - 4y\prime+ 3y) = 0[/tex], so cy is also a solution.

The set S is a subspace of [tex]R^n[/tex]because it is the null space of a fixed matrix A.

The null space of a matrix is always closed under addition and scalar multiplication.

The set S is not a subspace of [tex]R^n[/tex]because it is not closed under addition. If (1, 1, 0) and (0, 2, 1) are in S, then their sum (1, 3, 1) is not in S because. [tex]1 - 4(3) + 1 \neq 3.[/tex]

For similar questions on Subspace

https://brainly.com/question/13045843

#SPJ11

Therefore , the solution of the given problem of unitary method comes out to be 45 copies of the magazine are still available at the bookstore.

Use the tried-and-true core approach, the real variables, nor any useful information you learn from the general and detailed questions to finish the project expression. Customers may be given another chance to taste the products in response. If these improvements don't happen, we'll miss out on significant advancements in programming comprehension.

Here,

Let's figure out how many issues of the magazine are still available in the store.

Given: There were 90 copies in all when the bookstore opened.

1/6 of the total copies were sold at the bookstore yesterday.

=> 15 copies were sold yesterday = (1/6) * 90.

=> Total copies - Copies sold yesterday = 90 - 15 = 75 Remaining copies after yesterday's sale

=> 2/5 of the remaining copies were sold in the bookstore today.

30 copies were sold today, which

=>  (2/5) * 75.

The quantity of copies left after today's sale equals the quantity left after yesterday's sale. - Today's sales of copies:

=>  75 - 30 = 45

45 copies of the magazine are still available at the bookstore.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

If the sample is not truly representative, the conclusion may not accurately reflect the actual average age of all the students at the college.

Based on the given information, it can be concluded that the average age of all the students at City College is likely around 20. However, it's important to note that this conclusion is only valid if the sample of 90 students is representative of the entire student population at City College. If the sample is not truly representative, the conclusion may not accurately reflect the actual average age of all the students at the college.

The average age in a sample of 90 students at City College is 20. However, based on this sample alone, it cannot be conclusively determined that the average age of all the students at City College is also 20. This is because the sample may not be fully representative of the entire student population. More information or a larger sample would be needed to make a more accurate conclusion about the average age of all students at City College.

to learn more about the sample click here:

https://brainly.com/question/15659544

#SPJ11

If the sample of 90 students is representative of the entire student population at City College, then we can conclude that the average age of all students is approximately 20 years old.

Based on the given information, the average age in a sample of 90 students at City College is 20.

To determine if this sample can be used to conclude the average age of all students at City College, we need to consider these terms:
Sample:

A subset of a population, which in this case is the group of 90 students at City College.
Population:

The entire group of students at City College that we want to make a conclusion about.
Average (Mean) Age:

The sum of ages divided by the total number of students, in this case, 20 years.
Representativeness:

How well the sample reflects the characteristics of the entire population.
If the sample of 90 students is representative of the entire student population at City College, then we can conclude that the average age of all students is approximately 20 years old.

However, if the sample is not representative, the conclusion may not be accurate.

To make a more accurate conclusion, it is important to ensure that the sample is representative by using a larger sample size or random sampling methods.

For similar question on population.

https://brainly.com/question/30728094

#SPJ11

(a) The expected length of the queue, not including the vehicle being served, is 0.625 vehicles.

(b) The probability that there are no more than 5 cars at the gate, including the vehicle being served, is approximately 0.0176.

(c) The average waiting time of a vehicle at the ticket gate is 1.5 minutes or 0.025 hours.

(a) To find the expected length of the queue at the ticket gate, we need to calculate the expected number of vehicles waiting in the queue at any given time. This can be found by using the Little's Law, which states that the expected number of customers in a stable system is equal to the arrival rate multiplied by the average time spent in the system.

In this case, the arrival rate is 25 vehicles per hour, and the average time spent in the system is the time it takes to buy the tickets, which is 1.5 minutes or 0.025 hours. Therefore, the expected number of vehicles waiting in the queue is

E[N] = λW = 25 x 0.025 = 0.625 vehicles

So the expected length of the queue, not including the vehicle being served, is 0.625 vehicles.

(b) To find the probability that there are no more than 5 cars at the gate, including the vehicle being served, we need to use the Poisson distribution with a mean of 25 vehicles per hour. Let X be the number of vehicles arriving in an hour, then X Poisson(25).

P(X ≤ 5) = ∑ P(X = k) for k = 0 to 5

= ∑ (e^(-λ) × λ^k / k!) for k = 0 to 5

= e^(-25) × (25^0 / 0!) + e^(-25) × (25^1 / 1!) + ... + e^(-25) × (25^5 / 5!)

Using a calculator or software, this probability is found to be approximately 0.0176.

(c) The average waiting time of a vehicle can be found by dividing the expected number of vehicles waiting in the queue by the arrival rate. From part (a), we know that the expected number of vehicles waiting in the queue is 0.625 vehicles. The arrival rate is 25 vehicles per hour. Therefore, the average waiting time of a vehicle is

W = E[N] / λ = 0.625 / 25 = 0.025 hours or 1.5 minutes

So the average waiting time for a vehicle at the ticket gate is 1.5 minutes.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

True. The Conditional statement is known as the inductive hypothesis.

In mathematical induction, we use this hypothesis to prove that a certain statement or equation is true for all positive integers.

The process involves proving a base case for the smallest possible value of k and then using the inductive hypothesis to prove that the statement is true for the next consecutive value of k.

This process can be repeated infinitely, proving that the statement is true for all positive integers.
Let's say we want to prove that the sum of the first n positive integers is [tex]n(n+1)/2[/tex] for all positive integers n.

We can start by proving the base case for n=1, which states that [tex]1(1+1)/2 = 1.[/tex]

Now, assuming that the statement is true for some positive integer k, we can use the inductive hypothesis to prove that it is also true for k+1.

This involves showing that[tex](k+1)(k+2)/2 = k(k+1)/2 + (k+1)[/tex] which simplifies to the original equation.

By using the inductive hypothesis, we can prove that the statement is true for all positive integers.
Statement "[tex]P(K) - P(k + 1)[/tex] is true for all positive integers k" is indeed the inductive hypothesis. [tex]1(1+1)/2 = 1[/tex]

It is an important concept in mathematical induction, allowing us to prove statements and equations for all positive integers.

For similar questions on Conditional Statement

https://brainly.com/question/27839142

#SPJ11

Answer:

40.8°

Step-by-step explanation:

SohCahToa

use tan

tan^-1(19/22)

=40.81508387

=40.8

Answer:

Step-by-step explanation:

Here,

Opposite side is 19

Adjacent side is 22

To find : The value of Angle A, that is X°.

Formula

Tan X° = Opposite side/Adjacent side

Tan X° = 19/22 = 0.863 ( approximately )

X° = Tan inverse (0.863)

X° = 40.79° ~ 40.8°

Rounding off this to nearest tenth is 41°.

Hence,

X° = 41°

That is,

Angle A is 45°.

Step-by-step explanation:

I know it not all but this is what I have

To calculate the odds ratio of being diabetic for older adults compared to adults while controlling for glucose levels in a logistic regression model, we exponentiate the coefficient estimate for Age. For example, if the estimate is 0.05, the odds ratio is 1.65.

To obtain the odds ratio for older adults compared to adults while controlling for glucose levels in a logistic regression model predicting diabetic status based on age and glucose levels, we would need to look at the coefficient estimate for the age variable. Let's say the logistic regression model is

logit(P(Diabetic)) = β_0 + β_1Age + β_2Glucose

where P(Diabetic) is the probability of being diabetic, Age is the age in years, and Glucose is the glucose level in mg/dL. β_1 represents the coefficient estimate for Age.

To calculate the odds ratio for older adults (e.g., those who are 10 years older than the average age in the sample) compared to adults while controlling for glucose levels, we can exponentiate the coefficient estimate for Age and round to 0.01. That is

OR = exp(β_1*10)

For example, if the coefficient estimate for Age is 0.05, then:

OR = exp(0.05*10) = 1.65

This means that for every 10-year increase in age, the odds of being diabetic compared to non-diabetic increase by a factor of 1.65 while holding glucose levels constant.

To know more about logistic regression model:

https://brainly.com/question/30439764

#SPJ4

The next four equivalent fractions of 8/13 are:

Equivalent fractions are fractions that represent the same value but have different numerator and denominator. To find equivalent fractions of 8/13, we can multiply both the numerator and the denominator by the same non-zero integer.

In this case, we multiplied the numerator and denominator by 2, 3, 4, and 5, respectively, to obtain the next four equivalent fractions: 16/26, 24/39, 32/52, and 40/65. These fractions have different numerators and denominators, but they are equivalent to 8/13 as they represent the same value or amount.

Read more about equivalent expression

brainly.com/question/15775046

#SPJ1

Answer:2/3

Step-by-step explanation:

its the only possible answer because it needs to have a scale factor below one as A'B'C'D' is smaller than ABCD

Answer: 2/3

Step-by-step explanation:

The corresponding side of AD is A'D'.

AD = 30

A'D' = 20

Scale factor = 2/3 because AD * 2/3 = A'D'

If I'm wrong, please tell me.

Answer:

Eleven below Zero

Step-by-step explanation:

Every number below zero (less than zero) is a negative number.

Answer: 2 girls to 3 non-girls

Step-by-step explanation:

80 are girls

120 are boys (200-80)

80:120

simplify

2:3

Lin plans to swim 12 laps and has already swum 9.75 laps, so the number of laps she has left to swim can be found by subtracting 9.75 from 12:

y = 12 - 9.75

Simplifying the right side:

y = 2.25

Therefore, Lin has 2.25 laps left to swim.

Possible translations such that the graph passes through the point (1,2) are given as follows:

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

Two possible translations for the function to pass through the point (1,2) are given as follows:

More can be learned about translations at brainly.com/question/28174785

#SPJ1

Yes, the situation is a linear function as y = 30 + 5x is representing the standard form of a linear equation y = mx + b where m is the slope and b is the y-intercept.

Function is equal to ,

y = 30 + 5x

General form of the linear function is written as

y = mx + b

Here, the slope of the equation is 5,

This implies that for every additional service bought the cost increases by $5.

The y-intercept of the equation is 30.

This represents the initial cost of getting the dog groomed without any additional services.

The graph of this function will be a straight line.

And the relationship between the cost and the number of extra services bought will be linear.

When the number of extra services bought increases the cost of grooming the dog will increase by a constant amount .

Here the constant amount is equals to $5 per service.

Therefore, the function y = 30 + 5x is representing a linear function with slope 5 and y-intercept 30.

Learn more about linear function here

brainly.com/question/25058754

#SPJ4

The above question is incomplete, the complete question is:

The function y =30+5x represents the cost y (in dollars) of having your dog groomed and buying x extra services. Does this situation represent a linear function? Explain​

There are  [tex]5[/tex] ways to choose 4 members from a family of 5 to line up for a photo shoot.

The problem you are describing is a classic example of a combination problem, specifically choosing a certain number of items from a larger set without regard to the order in which they are arranged.

The formula to calculate the number of ways to choose "r" items from a set of "n" items without replacement is given by the combination formula, also known as "n choose r" or denoted as C(n, r). The formula is:

[tex]C(n, r) = n! / (r! \times (n - r)!)[/tex]

where "!" denotes the factorial of a number, which is the product of all positive integers up to that number.

In your case, you are choosing 4 members from a family of 5 for a photo shoot, and the order in which they line up does not matter. So you need to find C(5, 4).

Plugging the values into the formula:

[tex]C(5, 4) = 5! / (4! \times (5 - 4)!) = 5! / (4! \times 1!) = (5 \times 4 \times 3 \times 2 \times 1) / ((4 \times 3 \times 2 \times 1) \times 1) = 5[/tex]

Therefore,  there are  [tex]5[/tex] ways to choose 4 members from a family of 5 to line up for a photo shoot.

Learn more about possibilities here:

https://brainly.com/question/21366488

#SPJ1

The values of trigonometric-ratios in the given triangle whose legs are 4 and [tex]4\sqrt{3}[/tex] are:

a)sinθ=0.5

b)cosθ=0.866

c)tanθ=0.577

What is trigonometric-ratios ?

A right angle triangle has six trigonometric ratios: Sin, Cos, Tan, Cosec, Sec, and Cot. Sine, Cosine, Tangent, Cosecant, Secant, and Cotangent are their respective acronyms. These ratios show the ratio of various sides depending on the angle selected.

Given sides of triangle: 4 and [tex]4\sqrt{3}[/tex]

hypotenuse=[tex]\sqrt{perpendicular^{2}+base^{2} }[/tex]

                  =[tex]\sqrt{4^{2}+\((4\sqrt{3}) ^{2} }[/tex]

                  =[tex]\sqrt{16+48}[/tex]

                  =8

a)Sin θ=[tex]\frac{side opposite to the given angle}{hypotenuse}[/tex]

Sin θ=[tex]\frac{4 }{8}[/tex]

Sin θ=[tex]\frac{1}{2}[/tex]

Sin θ=0.5

b)Cos θ=[tex]\frac{side adjacent to the given angle}{hypotenuse}[/tex]

            =[tex]\frac{4\sqrt{3} }{8}[/tex]

            =[tex]\frac{\sqrt{3} }{2}[/tex]

            =[tex]\frac{1.732}{2}[/tex]

Cos θ=0.866

c)tan θ=[tex]\frac{side opposite to the given angle}{side adjacent to the given angle}[/tex]

            =[tex]\frac{4}{4\sqrt{3} }[/tex]

            =[tex]\frac{1}{\sqrt{3} }[/tex]

tan θ=0.577

To know more about trigonometric-ratios, visit:

https://brainly.com/question/25122825

#SPJ1

the Princess Resort is the best deal with a total cost of $657 for a four-night stay.

What is Total fixed cost?

Total fixed cost refers to the cost of all fixed assets which incur a fixed cost irrespective of the level of production in a company.

The Contemporary Resort costs $239 per night, so the total cost for four nights would be:

$239 × 4 = $956.

The Fun Times Resort costs $189 per night, so the total cost for four nights would be:

$189 × 4 = $756.

The regular cost is $219 per night, so the total cost for three nights would be:

$219 × 3 = $657. But since they get the fourth night free, the total cost for four nights would be:

$657 + $0 = $657.

Comparing the three options, the Princess Resort is the best deal with a total cost of $657 for a four-night stay.

To know more about Total fixed cost visit,

https://brainly.com/question/30641520

#SPJ1

Both computers working together can process the payroll in 2.4 hours.

Let's denote the time it takes for both computers working together to process the payroll as "t".

We can use the formula:

work done = rate x time

where "work done" is the same in both cases, as they are processing the same payroll. Therefore, we can set up an equation using the rates :

1/6 + 1/4 = 1/t

We can simplify the left-hand side of the equation:

2/12 + 3/12 = 1/t

5/12 = 1/t

Multiplying both sides by 12t:

5t = 12

t = 12/5

t = 2.4

To know more about work done, here

brainly.com/question/13662169

#SPJ4

Answer: 320π or approximately 1005.31 mi

Step-by-step explanation:

The formula for the volume of a cylinder is

π r² h

we need to find the radius which is 16/2 = 8

plug in and solve

π 8² *5

π 64 *5

320π or approximately 1005.31 mi

The correct option is (a) i.e. The translation direction is downward, and the number of units is 8.

What is translation?

In mathematics, translation refers to the process of moving a geometric object from one location to another, without changing its size, shape, or orientation.

To determine the translation direction and number of units, we need to find the vector between the original point Q(4,3) and the new point Q'(4,-5).

The vector between two points is found by subtracting the coordinates of the initial point from those of the final point. Therefore, we have:

Q'Q = (4,-5) - (4,3) = (0, -8)

This tells us that the new point Q' is 8 units down (in the negative y-direction) from the original point Q. Therefore, the translation direction is downward, and the number of units is 8.

To learn more about translation visit the link:

https://brainly.com/question/1574635

#SPJ1