Identify each reaction from the citric acid cycle as an oxidation‑reduction reaction, an esterification reaction, an amidation reaction, a hydrolysis reaction, a hydration reaction, or a dehydration reaction.
1. Which type of reaction occurs when succinyl-CoA is converted to succinate in the citric acid cycle?
2. Which type of reaction occurs when malate is converted to oxaloacetate in the citric acid cycle?
3. Which type of reaction occurs when aconitate is converted to isocitrate in the citric acid cycle?

Answer:

100.2g of CuI₂ you must add

Explanation:

Molality, m, is defined as the ratio between moles of solute and kg of solvent.

In the problem, you have a 0.694m of copper (II) iodide -CuI₂, molar mass: ‎317.35 g/mol-. That means there are 0.694 moles of CuI₂ per kg of water.

As you have 455g = 0.455kg of water -solvent-, moles of CuI₂ are:

0.455kg ₓ (0.694 moles CuI₂ / kg) = 0.316 moles of CuI₂

Using molar mass, grams of CuI₂ in the solution are:

0.316moles CuI₂ ₓ (317.35g / mol) =

Answer:

[tex]4.36~g~XY[/tex]

Explanation:

In this case, we can start with the reaction:

[tex]2X + Y_2~->~2XY[/tex]

If we check the reaction, we will have 2 X and Y atoms on both sides. So, the reaction is balanced. Now, the problem give to us two amounts of reagents. Therefore, we have to find the limiting reagent. The first step then is to find the moles of each compound using the molar mass:

[tex]3.4~g~X\frac{1~mol~X}{85~g~X}=0.04~mol~X[/tex]

[tex]4.2~g~Y_2\frac{1~mol~Y_2}{48~g~Y_2}=0.0875~mol~Y_2[/tex]

Now, we can divide by the coefficient of each compound (given by the balanced reaction):

[tex]\frac{0.04~mol~X}{1}=~0.04[/tex]

[tex]\frac{0.0875~mol~Y_2}{2}=0.04375[/tex]

The smallest value is for "X", therefore this is our limiting reagent. Now, if we use the molar ratio between "X" and "XY" we can calculate the moles of XY, so:

[tex]0.04~mol~X\frac{2~mol~XY}{2~mol~X}=0.04~mol~XY[/tex]

Finally, with the molar mass of "XY" we can calculate the grams. Now, we know that 1 mol X = 85 g X and 1 mol [tex]Y_2[/tex] = 48 g [tex]Y_2[/tex] (therefore 1 mol Y = 24 g Y). With this in mind the molar mass of XY would be 85+24 = 109 g/mol. With this in mind:

[tex]0.04~mol~XY\frac{109~g~XY}{1~mol~XY}=4.36~g~XY[/tex]

I hope it helps!

Answer:

Hexane

Explanation:

You have a carbon structure with only single bonds.  This means that the name will end in -ane.

There are 6 carbon atoms.  This means that the name will begin with hex-.

The structure is hexane.

Answer:

[tex]r_B=2M/s[/tex]

Explanation:

Hello,

In this case, since the average rate of reaction is related with the consumption of A which has an stoichiometric coefficient of 1, the rate of formation of B will be:

[tex]r_B=2*1M/s\\\\r_B=2M/s[/tex]

By cause of the stoichiometric coefficient of B which doubles the average rate.

Best regards.

Answer:

[tex]\boxed{Butyne}[/tex]

Explanation:

Triple Bonds => So it is an alkyne

The suffix used will be "-yne"

4 Carbons => The prefix used will be "But-"

Combining the prefix and suffix, we get:

=> Butyne

Answer:

[tex]\boxed{\mathrm{Butyne}}[/tex]

Explanation:

Alkynes have triple bonds ≡. The molecule has one triple bond.

Suffix ⇒ yne

The molecule has 4 carbon atoms and 6 hydrogen atoms.

Prefix ⇒ But (4 carbons)

The molecule is Butyne.

[tex]\mathrm{C_4H_6}[/tex]

Answer:

Cu₂S

Explanation:

From the question,

                     Cu                                 S

Mass:            40.80 g                      51.09-40.80 = 10.29 g

Mole ratio:     40.80/63.5                 10.29/32.1

                         0.64          :                0.32

Divide by the smallest,

                         0.64/0.32   :                0.32/0.32

                           2                :                  1

   Therefore,

Empirical formula = Cu₂S.

Answer:

The answer below would be written in a straight line from left to right but I wrote it as a list to make it easier to read.

Explanation:

1s^2

2s^2

2p^6

3s^2

3p^6

4s^2

3d^10

4p^5

Answer:

a) [tex]\Delta G=2.6kJ[/tex]

b) [tex]\Delta G=-979.57kJ[/tex]

c) [tex]\Delta G=264.21kJ[/tex]

Explanation:

Hello,

In this case, in each reaction we must subtract the Gibbs free energy of formation the reactants to the Gibbs free energy of formation of the products considering each species stoichiometric coefficients. In such a way, the Gibbs free energy of formations are:

[tex]\Delta _fG_{H_2}=\Delta _fG_{I_2}=0kJ/mol\\\Delta _fG_{HI}=1.3kJ/mol\\\Delta _fG_{CO_2}=-394.4kJ/mol\\\Delta _fG_{CO}=-137.3 kJ/mol\\\Delta _fG_{NH_3}=16.7 kJ/mol\\\Delta _fG_{HCl}=-95.3kJ/mol\\\Delta _fG_{MnO_2}=465.37kJ/mol\\\Delta _fG_{Mn}=0kJ/mol\\\Delta _fG_{NH_4Cl}=-342.81kJ/mol[/tex]

So we proceed as follows:

a)

[tex]\Delta G=2\Delta _fG_{HI}-\Delta _fG_{H_2}-\Delta _fG_{I_2}\\\\\Delta G=2*1.3\\\\\Delta G=2.6kJ[/tex]

b)

[tex]\Delta G=\Delta _fG_{Mn}+2*\Delta _fG_{CO_2}-\Delta _fG_{MnO_2}-2*\Delta _fG_{CO}\\\\\Delta G=0+2*-394.4-465.37-2*-137.3\\\\\Delta G=-979.57kJ[/tex]

c)

[tex]\Delta G=\Delta _fG_{NH_3}+\Delta _fG_{HCl}-\Delta _fG_{NH_4Cl}\\\\\Delta G=16.7-95.3-(-342.81)\\\\\Delta G=264.21kJ[/tex]

Regards.

Answer:

Water has a low specific heat capacity and so large bodies of water moderate temperatures on Earth.

Explanation:

Water has a very high specific heat capacity, meaning that it has to absorb a lot of energy to raise the temperature by one degree. Because water has a high specific heat capacity, large bodies of water can moderate the temperature of nearby land.

Hope this helps.

Answer:

H20 is an acid and OH is its conjugate base.​

Explanation:

Chemical reactions involving acids and bases occur. An acid is a substance that dissociates in water i.e. lose an hydrogen ion/proton. According to the Bronsted-Lowry acid-base theory, when an acid dissociates in water and loses its hydrogen ion, the resulting substance that forms is the CONJUGATE BASE. A conjugate base is the compound formed as a result of the removal of an H+ ion from an acid.

Based on the chemical reaction in the question, NaHCO3 + H20 = H2CO3 + OH- + Na+

The H20 loses its hydrogen ion (H+) to form an anion OH-. This anion formed is the conjugate base while H20 is its acid.

Answer:

[tex]\Delta G^0 _{rxn} = 207.6\ kJ/mol[/tex]

ΔG ≅ 199.91 kJ

Explanation:

Consider the reaction:

[tex]2N_{2(g)} + O_{2(g)} \to 2N_2O_{(g)}[/tex]

temperature = 298.15K

pressure = 22.20 mmHg

From, The standard Thermodynamic Tables; the following data were obtained

[tex]\Delta G_f^0 \ \ \ N_2O_{(g)} = 103 .8 \ kJ/mol[/tex]

[tex]\Delta G_f^0 \ \ \ N_2{(g)} =0 \ kJ/mol[/tex]

[tex]\Delta G_f^0 \ \ \ O_2{(g)} =0 \ kJ/mol[/tex]

[tex]\Delta G^0 _{rxn} = 2 \times \Delta G_f^0 \ N_2O_{(g)} - ( 2 \times \Delta G_f^0 \ N_2{(g)} + \Delta G_f^0 \ O_{2(g)})[/tex]

[tex]\Delta G^0 _{rxn} = 2 \times 103.8 \ kJ/mol - ( 2 \times 0 + 0)[/tex]

[tex]\Delta G^0 _{rxn} = 207.6\ kJ/mol[/tex]

The equilibrium constant determined from the partial pressure denoted as [tex]K_p[/tex] can be expressed as :

[tex]K_p = \dfrac{(22.20)^2}{(22.20)^2 \times (22.20)}[/tex]

[tex]K_p = \dfrac{1}{ (22.20)}[/tex]

[tex]K_p[/tex] = 0.045

[tex]\Delta G = \Delta G^0 _{rxn} + RT \ lnK[/tex]

where;

R = gas constant = 8.314 × 10⁻³ kJ

[tex]\Delta G =207.6 + 8.314 \times 10 ^{-3} \times 298.15 \ ln(0.045)[/tex]

[tex]\Delta G =207.6 + 2.4788191 \times \ ln(0.045)[/tex]

[tex]\Delta G =207.6+ (-7.687048037)[/tex]

[tex]\Delta G =[/tex] 199.912952  kJ

ΔG ≅ 199.91 kJ

Answer: B. The period number tells which is the highest energy level occupied by the electrons

Explanation:

Thus, we can say that the period number tells which is the highest energy level occupied by the electrons in an atom.

hence, the correct option is B. The period number tells which is the highest energy level occupied  by the electrons.

The period number tell about the energy levels occupied by electrons in an atom B. The period number tells which is the highest energy level occupied by the electrons. option B , second option is correct.

The fixed distances from an atom's nucleus where electrons may be found are referred to as energy levels (also known as electron shells). Higher energy electrons have greater energy as you move out from the nucleus. A region of space within an energy level known as an orbital is where an electron is most likely to be found.

When a quantum mechanical system or particle is bound, or spatially constrained, it can only take on specific discrete energy values, or energy levels. Classical particles, on the other hand, can have any energy level.

Therefore, option B , second option is correct.

Learn more about   energy levels at;

https://brainly.com/question/20561440

#SPJ6

Answer:

The osmotic pressure of ocean water is about 27 atm.

Explanation:

Pure water is water that contains no impurities. Ocean water is 96.5% pure with only about 3.5% of its content, salt water.

Osmotic pressure occurs when solutions that have different concentrations are isolated by a membrane. This osmotic pressure makes water move towards the solution that has the highest concentration, which means that if the concentration or temperature of the solution is high, the osmotic pressure becomes higher.

The equation for osmotic pressure is pi = iMRT.

Answer:

The correct answer is - alternating and direct, in order.

Explanation:

Alternating current is is type of electric current that is characterized by the direction of the flow of electrons in continuously switches its directs in opposite manner at regular cycles. While direct current or DC is flow of the electrons that move from starting to end in one direction.

Spinning turbines always leads to the alternating electric current while only solar energy produces the direct current with the help of the solar panels.

Thus, the correct answer is -  alternating and direct, in order.

Answer:

1. alternating

2. direct

3. The sun heats up the atmosphere as Earth spins, creating areas of high and low temperature. This temperature difference causes wind to start moving through convection, which can then drive a wind turbine to produce electricity.

Explanation:

From Penn

Answer:

2 electrons

Explanation:

Answer:

E. O2

Explanation:

All substances has a simple molecular structure, where between their molecules are held by van der Waals' forces. But C must be incorrect because between the H2O2 molecules, they are mainly held by hydrogen bonds on top of van der Waals' forces. Hydrogen bonds are stronger than van der Waals' forces, so more energy is required to separate the H2O2 molecules.

In structures A and D, the molecules are polar. Their van der Waals' forces are stronger than Cl2H2 and O2, which are non-polar.

Between the Cl2H2 and O2, O2 has a smaller molecular size. The van der Waals' forces between the O2 molecules are hence the weakest. Least amount of energy is required to break the intermolecular forces between the O2 molecules therefore it has the lowest boiling point.

Answer:

High purity.

Stability (low reactivity)

Low hygroscopicity (to minimize weight changes due to humidity)

Explanation:

There are different primary standards that could be used in a standardization titration in order to achieve the best and accurate result possible. These standards include high purity,stability and low hygoscropicity .

A high purity means the reactants lack impurities which could affect the result. Stability also ensures that there is non reactivity with elements/compounds in the atmosphere while low hygroscopicity ensures weight changes are minimized due to humidity.

Answer:

1)is more electronegative

2)

3) is more electronegative

Explanation:

1) for the first question, iodine is more electronegative than tellurium hence we naturally expect that HI should be more acidic than H2Te since electronegativities play a role in the acidity of chemical species.

2) the correct option is not listed because the H2Te bond is weaker than the H2S bond. This makes it easier for H2Te to dissociate releasing H^+ , thereby being more acidic than H2S.

3) Hydrogen is more electronegative than sodium hence it cannot be ionized thus NaH is not acidic.

Answer:

Produces Wind Currents

Explanation:

Answer:

produces wind currents

Explanation:

i just took the test and got it right :}

Answer:B

Explanation: A P E X

Answer:

a) 1.5 x 10^-3 mol/L

b) 1.35×10^-8

c) decrease

Explanation:

The solubility of lead II iodide is given by the equation;

PbI2(s) -----> Pb^2+(aq) + 2I^-

By looking at the ICE table, I^-=2x= 3.0 x 10^-3 mol/L/2 = 1.5×10^-3 mol/L

Hence molar solubility of PbI2 = 1.5 x 10^-3 mol/L

Ksp= [Pb^2+] [2I^-]^2 =

Let the molar solubility of each ion be x, therefore;

Ksp= 4x^3

Ksp= 4(1.5 x 10^-3 mol/L)^3= 1.35×10^-8

Addition of kI to the saturated solution will shift the equilibrium position to the left thereby decreasing the solubility of the PbI2 in the system due to common ion effect. The concentration of the iodide ion is now excess in the system leading to the reverse reaction being favoured according to Le Chateliers principle.

a) The molar solubility of PbI₂ is  [tex]1.5 * 10^{-3} mol/L[/tex]

b) The solubility constant is [tex]1.35*10^{-8}[/tex]

c) The molar solubility of lead (II) will decrease.

The solubility of lead II iodide is given by the equation;

[tex]PbI_2(s) ----- > Pb^{2+}(aq) + 2I^-[/tex]

By looking at the ICE table,

[tex]I^-=2x= 3.0 * 10^{-3} mol/L/2 =[/tex]  [tex]1.5 * 10^{-3} mol/L[/tex]

Hence, molar solubility of PbI2 = [tex]1.5 * 10^{-3} mol/L[/tex]

[tex]Ksp= [Pb^{2+}] [2I^-]^2[/tex]

Let the molar solubility of each ion be x, therefore;

[tex]Ksp= 4x^3\\\\Ksp= 4(1.5 * 10^{-3} mol/L)^3\\\\Ksp= 1.35*10^{-8}[/tex]

The addition of KI to the saturated solution will shift the equilibrium position to the left thereby decreasing the solubility of the PbI₂ in the system due to common ion effect. The concentration of the iodide ion is now excess in the system leading to the reverse reaction being favoured according to Le- Ch-ateliers principle.

Find more information about Solubility product here:

brainly.com/question/9807304

Answer: C

Explanation:

Right on edge 2020

The Bureau of Land Management was originally created to manage land for grazing, mining, developing oil and gas.

Land management refers to the activities which are done in order to protect and preserve the land as well the resources found on land.

The Bureau of Land Management was created to manage land in the US.

The Bureau of Land Management was originally created to manage land for grazing, mining, developing oil and gas.

Learn more about land management at: https://brainly.com/question/784519

Answer:

The correct answer is 51.2 degree C.

Explanation:

The standard enthalpy for H₂SO₄ (l) is -814 kJ/mole and the standard enthalpy for H₂SO₄ (aq) is -909.3 kJ/mole.  

Now the dHreaction = dHf (product) - dHf (reactant)  

= -909.3 - (-814)

dHreaction or q = -95.3 kJ of energy will be used for dissociating one mole of H₂SO₄.  

The heat change in calorimetry can be determined by using the formula,  

q = mass * specific heat capacity * change in temperature -----------(i)

Based on the given information, the density of H₂SO₄ is 1.060 g/ml

The volume of H₂SO₄ is 1 Liter

Therefore, the mass of H₂SO₄ will be, density/Volume = 1.060 g/ml / 1 × 10⁻³ ml = 1060 grams

The initial temperature given is 25.2 degrees C, or 273+25.2 = 298.2 K, let us consider the final temperature to be T₂.  

ΔT = T₂ -T₁ = T₂ - 298.2 K

Now putting the values in equation (i) we get,  

95.3 kJ = 1060 grams × 3.458 j/gK (T₂ - 298.2 K) (the specific heat capacity of the final solution is 3.458 J/gK)

(T₂ - 298.2 K) = 95300 J / 1060 × 3.458 = 26 K

T₂ = 298.2 K + 26 K

T₂ = 324.2 K or 324.2 - 273 = 51.2 degree C.  

Answer:

T2 = 500K

Explanation:

Given data:

P1 = 1atm

V1 = 300ml

T1= 27 + 273 = 300K

T2 = ?

V2 = 1.00ml

P2 = 500atm

Apply combined law:

P1xV1//T1 = P2xV2/T2 ...eq1

Substituting values into eq1:

1 x 300/300 = 500 x 1/T2

Solve for T2:

300T2 = 500 x 300

300T2 = 150000

Divide both sides by the coefficient of T2:

300T2/300 = 150000/300

T2 = 500K

Answer:

-second

Explanation:

6-ethyl-2-octyne is an unsaturated compound with a triple bond.

6-ethyl-2-octyne will have a triple bound attached to the second carbon. The suffix -yne suggests that compound carry a triple bond and the number  "2" before suffix refers to the position of triple bond that is second carbon.

Hence, the correct option is  "-second ".

Answer:

El volumen del gas era 12.95 L

Explanation:

Se relaciona la presión y el volumen mediante la ley de Boyle, que dice:

“El volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión”

La ley de Boyle se expresa matemáticamente como:  P*V=k

Por otro lado, la Ley de Charles consiste en la relación que existe entre el volumen y la temperatura absoluta de una cierta cantidad de gas ideal, el cual se mantiene a una presión constante. Esta ley dice que cuando la cantidad de gas y de presión se mantienen constantes, el cociente que existe entre el volumen y la temperatura siempre tendrán el mismo valor:  

[tex]\frac{V}{T}=k[/tex]

Por último, la Ley de Gay Lussac dice que la temperatura absoluta y la presión son directamente proporcionales. Es decir, cuando se mantiene todo lo demás constante, mientras suba la temperatura de un gas subirá también su presión. Y mientras la temperatura del gas baje, lo mismo ocurrirá con la presión:

[tex]\frac{P}{T}=k[/tex]

Combinado las mencionadas tres leyes se obtiene:

[tex]\frac{P*V}{T} =k[/tex]

Cuando se desean estudiar dos diferentes estados, uno inicial y una final de un gas, se puede aplicar:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

Recordando que la temperatura debe usarse en grados Kelvin, conoces los siguientes datos:

Reemplazando:

[tex]\frac{750 torr*8.5 L}{293K} =\frac{425 torr*V2}{253 K}[/tex]

Resolviendo:

[tex]V2=\frac{750 torr*8.5 L}{293K} *\frac{253 K}{425 torr}[/tex]

V2= 12.95 L

El volumen del gas era 12.95 L

Answer:

Kc = [H₂CO₃] / [CO₂]

Explanation:

Equilibrium constant expression (Kc) of any reaction is defined as the ratio between molar concentrations in equilibrium of products over reactants.

Pure solids and liquids don't affect the equilibrium and you don't have to take its concentrations in the equilibrium.

Also, each specie must be powered to its reactant coefficient.

For example, for the reaction:

aA(s) + bB(aq) ⇄ cC(l) + nD(g) + xE(aq)

The equilibrium constant, kc is:

Kc = [D]ⁿ / [B]ᵇ[E]ˣ

You don't take A nor C species because are pure solids and liquids. b, n and x are the reactant coefficients of each substance. Ratio of products over reactants

Thus, for the reaction:

CO₂(aq) + H₂O(l) ⇄ H₂CO₃(aq)

The Kc is:

Answer:

[tex]\large \boxed{29.7 \,^{\circ}\text{C}}[/tex]

Explanation:

There are two heat transfers involved: the heat lost by the aluminium and the heat gained by the water.

According to the Law of Conservation of Energy, energy can neither be destroyed nor created, so the sum of these terms must be zero.

Let the Al be Component 1 and the H₂O be Component 2.

Data:  

For the Al:

[tex]m_{1} =\text{27.4 g; }T_{i} = 69.5 ^{\circ}\text{C; }\\C_{1} = 0.903 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$}[/tex]

For the water:

[tex]m_{2} =\text{50.0 g; }T_{i} = 25.0 ^{\circ}\text{C; }\\C_{2} = 4.184 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$}[/tex]

Calculations

(a) The relative temperature changes

[tex]\begin{array}{rcl}\text{Heat lost by Al + heat gained by water} & = & 0\\m_{1}C_{1}\Delta T_{1} + m_{2}C_{2}\Delta T_{2} & = & 0\\\text{27.4 g}\times 0.903 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$} \times\Delta T_{1} + \text{50.0 g} \times 4.184 \text{ J$^{\circ}$C$^{-1}$g$^{-1}$}\Delta \times T_{2} & = & 0\\24.74\Delta T_{1} + 209.2\Delta T_{2} & = & 0\\\end{array}[/tex]

(b) Final temperature

[tex]\Delta T_{1} = T_{\text{f}} - 69.5 ^{\circ}\text{C}\\\Delta T_{2} = T_{\text{f}} - 25.0 ^{\circ}\text{C}[/tex]

[tex]\begin{array}{rcl}24.74(T_{\text{f}} - 69.5 \, ^{\circ}\text{C}) + 209.2(T_{\text{f}} - 25.0 \, ^{\circ}\text{C}) & = & 0\\24.74T_{\text{f}} - 1719 \, ^{\circ}\text{C} + 209.2T_{\text{f}} -5230 \, ^{\circ}\text{C} & = & 0\\233.9T_{\text{f}} - 6949\, ^{\circ}\text{C} & = & 0\\233.9T_{\text{f}} & = & 6949 \, ^{\circ}\text{C}\\T_{\text{f}}& = & \mathbf{29.7 \, ^{\circ}}\textbf{C}\\\end{array}\\\text{The final temperature is $\large \boxed{\mathbf{29.7 \,^{\circ}}\textbf{C}}$}[/tex]

Check:

[tex]\begin{array}{rcl}27.4 \times 0.903 \times (29.7 - 69.5) + 50.0 \times 4.184 (29.7 - 25.0)& = & 0\\24.74(-39.8) +209.2(4.7) & = & 0\\-984.6 +983.2 & = & 0\\-985 +983 & = & 0\\0&=&0\end{array}[/tex]

The second term has only two significant figures because ΔT₂ has only two.

It agrees to two significant figures

Answer: stay away from doors and windows.

Explanation:

to aviod geting hit by glass

Answer:

Stay away from doors and windows.

Explanation:

Always stay in the center of the room during a tornado storm. Avoid windows, doors, and corners. If you’re near a window, the glass can shatter and hurt you.

Answer:

BaCl2

Explanation:

Barium = Ba

Chloride => Cl-

Chemical Equation:

Ba + Cl => BaCl2

Note:

The valency of barium is 2 and valency of chloride is 1 (i.e. chlorine). The formula formed by the combination of these elements is BaCl2 (there's exchange of valencies when these two elements combine).