Answer:
[tex]HCO^-_3+HBrO\rightleftharpoons H_2CO_3+BrO^-[/tex]
Explanation:
Hello there!
In this case, according to the Brønsted-Lowry theory of acids, it is possible to realize that HBrO acts as the Brønsted-Lowry acid as it has a free hydrogen to give away to HCO₃⁻ which acts as the Brønsted-Lowry base able to accept the incoming hydrogen; therefore, the Brønsted-Lowry reaction is:
[tex]HCO^-_3+HBrO\rightleftharpoons H_2CO_3+BrO^-[/tex]
Best regards!
In the Brønsted-Lowry reaction between HCO⁻₃ and HBrO, the formed acid is H₂CO₃ and the formed base is BrO⁻.
According to Brønsted-Lowry acid-base theory:
An acid is a substance that donates H⁺.A base is a substance that accepts H⁺.Let's consider the following Brønsted-Lowry reaction.
HCO⁻₃ + HBrO ⇄ acid + base
HBrO can only donate H⁺, so it is an acid.HCO⁻₃ can accept or donate H⁺. Here, it will accept the H⁺ donated by HBrO and behave as a base.The resulting reaction is:
HCO⁻₃ + HBrO ⇄ H₂CO₃ + BrO⁻
H₂CO₃ can donate H⁺ so it is an acid.BrO⁻ can accept H⁺ so it is a base.In the Brønsted-Lowry reaction between HCO⁻₃ and HBrO, the formed acid is H₂CO₃ and the formed base is BrO⁻.
Learn more about Brønsted-Lowry acid-base theory here: https://brainly.com/question/7256753
Based on this information which of the following conclusions can be drawn about the growth rate of grass? hurry
A ___________ ion is made of 2 or more atoms of different elements
O nuclear
O polyatomic
O magnetic
O mono-atomic
Answer: polyatomic
Explanation:hope you find helpful
b) How many kilojoules of heat will be released by the combustion of 22.52 g of this liquid at
constant pressure?
C2H5OH burning in a simple alcohol lamp is -1277.3kJ/mol
Answer:
Explanation:
You realize that C2H5OH releases -1277.3kJ/mol. We need to convert this to the amount based on the question. We that 22.52g of C2H5OH = 0.48884 mol.
This means that it will release (-1277.3)(0.48884) = 624.40 KJ of heat will be released. Note the negative sign is not necessary here (I think) because it says how much is released and not the change in heat of the system so it should be positive.
If 45 grams of solid aluminum and 301 grams of ammonium perchlorate are reacted. How much excess reactant is left over? Show your work using equation editor.
Answer: Your balanced equation is 2Al + 3S --> Al_2S_3. In two separate equations, first use the 48.5g of Al to find the amount (in moles) of Al_2S_3. Then use the 62.8g of S to find the amount (in moles) of Al_2S_3. By doing these, you find which reactant (the Al or the S) produces the least amount of Al_2S_3. Since it's the S, that's the limiting reactant: you then use that 62.8g of S to find how many grams of Al will be used in the reaction. (Use the same balanced equation.) You find that 35.2g of Al will be used, then find the excess by subtracting that 35.19 from the original 48.5g. Your excess amount is 13.3g of Al!
Explanation:
hopefully this is what you were looking for <3 :)
The amount of excess reactant that left over the chemical reaction between aluminum and ammonium perchlorate is 0.9 moles.
How do we convert mass into moles?Mass into moles (n) will be converted by using the below equation as:
n = W/M, where
W = given mass
M = molar mass
Moles of 45g of Aluminum = 45g / 27g/mol = 1.66 mol
Moles of 301g of ammonium perchlorate = 301g / 117.4g/mol = 2.56 mol
Both reactants are reacted with each other and one of the reactant is fully consumed, so the excess reactant will be calculated as:
Excess reactant = 2.56mol - 1.66mol = 0.9 moles
Hence amount of excess reactant is 0.9 moles.
To know more about moles & mass, visit the below link:
https://brainly.com/question/24639749
#SPJ2
Our most recent mass extension happened about 65million years ago. Describe the effects of this event.
Answer:
To explain what caused this mass extinction, scientists have focused on events that would have altered our planet's climate in dramatic, powerful ways. The leading theory is that a huge asteroid or comet slammed into Earth 65 million years ago, blocking sunlight, changing the climate and setting off global wildfires.
if eleanor starts with 25.00 ml of a weak acid (the concentration is 0.1084 m), then how many ml of 0.1817 m naoh has to be added to reach the equivalence point
Answer:
14.91 mL
Explanation:
Assuming the weak acid is monoprotic, we can solve this problem using the equation:
C₁V₁=C₂V₂Where subscript 1 stands for the Volume and Concentration of the weak acid, while 2 stands for those of NaOH.
We input the data:
25.00 mL * 0.1084 M = 0.1817 M * V₂And solve for V₂:
V₂ = 14.91 mLThe volume of 0.1817 M NaOH has to be added to reach the equivalence point is 14.91 mL.
How we calculate the volume?Volume for the given solution will be calculated from the below equation:
M₁V₁ = M₂V₂, where
M₁ = Molarity of weak acid = 0.1084 M
V₁ = volume of weak acid = 25 mL
M₂ = molarity of NaOH = 0.1817 M
V₂ = volume of NaOH = to find?
On putting all these values on the above equation and calculate for V₂ as:
V₂ = (0.1084)(25) / (0.1817) = 14.91 mL
Hence required volume is 14.91 mL.
To know more about molarity, visit the below link:
https://brainly.com/question/489225
the maximum amount of copper sulfate that can be dissolved in 45.0g of water at 70C is 20.0g. what is the solubility of copper sulfate at that temperature?
(in grams per 100g water)
Answer:
That depends on the amount. Solubility is the maximum amount of salt dissolved in 100 g of water. So, if the amount is within limit, then yes. Solubility of anhydrous copper sulfate is 24.3 g/100 g water, so it is not bad. Put it in perspective, the solubility of NaCl is about 35 g/100 g water at room temperature. If the amount of copper sulfate is unknown, qualitative I'd say solid copper sulfate will dissolve in water completely.
Explanation:
If you use the pentahydrate CuSO4.5H2O then the solubility at 20°C is 20.8g/100ml H2O
If you use the anhydride, CuSO4. then the solubility at 20°C is 36.2g/100ml H2O
You want to produce a casting of sterling silver that is silver plus 13 atomic% copper. Pure silver is too soft for many applications and adding 13 atomic% copper strengthens the silver without significantly changing the color. To produce the sterling silver casting, you are going to melt commercially available pure silver and copper in a furnace, and then you will pour the liquid metal mixture into a mold. The following questions relate to this alloy. (a) In selecting a furnace, what must be the minimum value of the high-temperature capability of your selected furnace
Answer:
1085° C
Explanation:
From the phase diagram of Ag-Cu shown below:
The minimum value of the high-temp required to be selected for the furnace is: 1085° C
This is on the grounds that the furnace should be chosen to such an extent that it should melt any sort of possible material including pure Cu that melts and liquefies at the temperature of 1085° C.
Given this slope equation, calculate the x-intercept (the point at which y = 0).
y = 0.523x + 16.8
Answer:
The answer is (-31.58, 0) when rounded to 2 decimal places.
Molecules on the surface of the ice escaping into the water happen in ————.
A. Boiling
B. Freezing
C. Condensation
D. Melting
E. Sublimation
Is anyone good at chemistry if so can someone help me please ?
(NO LINKS)
In general, salts (formed during a neutralization reaction) are ionic compounds that are soluble in water and dissociate in solution into ions that conduct electricity. Out of the six statements given, there are three related statements that rehash the foregoing, and there are three related statements that are collectively incorrect.
Statements A, B, and D are (generally) true regarding salts formed during a neutralization reaction. When you consider that the net ionic equation of many acid-base neutralization reactions is H⁺(aq) + OH⁻(aq) → H₂O(l), the counterions of the H⁺(aq) and OH⁻(aq) are the aqueous spectator ions that comprise the salt. These ions are electrolytes, as they are charged species that can carry a current in solution; they are ionic compounds by definition since they're composed of cations and anions; and, as aqueous species, they're clearly dissolved in water.
Statements C, E, and F, as a whole, generally aren't true of such salts.
What is the type of the synthesis reaction between Chromium + oxygen???
Answer:
Explanation: Reaction of oxygen with chromium(II) and chromium(III) porphyrins and synthesis of a .mu.-oxo chromium porphyrin derivative.
tion:
When 4.088 grams of a hydrocarbon, CxHy, were burned in a combustion analysis apparatus, 13.82 grams of CO2 and 2.829 grams of H2O were produced.
In a separate experiment, the molecular weight of the compound was found to be 78.11 amu. Determine the empirical formula and the molecular formula of the hydrocarbon.
Answer:
Empirical formula: CH
Molecular formula: C₆H₆
Explanation:
Based on the combustion of a hydrocarbon, the moles of CO₂ = Moles of Carbon in the hydrocarbon and the moles of H₂O = 1/2 moles of hydrogen in the hydrocarbon.
The empirical formula is the simplest whole number of atoms present in a molecule. With the moles of C and H we can find empirical formula:
Moles C -Molar mass CO₂ = 44.01g/mol-:
13.82g * (1mol / 44.01g) = 0.314 moles C
Moles H -Molar mass H₂O = 18.01g/mol-:
2.829g H₂O * (1mol / 18.01g) = 0.157 moles H₂O * (2mol H / 1mol H₂O) = 0.314 moles of H
The ratio of moles H: moles C:
0.314 moles / 0.314 moles = 1
That means empirical formula is:
CHWith the molecular weight and empirical formula we can find the molecular formula:
Molar mass CH = 12.01g/mol+1.01g/mol = 13.02g/mol
As the molecular weight of the molecule is 78.11amu = 78.11g/mol, there are:
78.11g/mol / 13.02g/mol = 6 times the empirical formula in the molecular formula
That means molecular formula is:
C₆H₆Give the systematic (IUPAC) name for each molecule. This molecule has the condensed formula C H 3 C O C H 3. The oxygen atom has a double bond to the center carbon. systematic (IUPAC) name: This molecule has the condensed formula C H 3 C H 2 C H 2 C O C H 3. The oxygen atom has a double bond to carbon. systematic (IUPAC) name:
Answer: The IUPAC name of [tex]CH_3COCH_3[/tex] propan-2-one and [tex]CH_3CH_2CH_2COCH_3[/tex] is pentan-2-one.
Explanation:
The basic rules for naming of organic compounds are :
1. First select the longest possible carbon chain. The longest possible carbon chain should include the carbons of double or triple bonds or functional group.For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.
2. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne by adding the suffix -yne and ketones by adding the suffix -one.;
3. The numbering is done in such a way that the carbon containing the functional group gets the lowest number. While writing the name, the word root is given first , followed by the position of carbon containing the functional group followed by the suffix.
The IUPAC name of [tex]CH_3COCH_3[/tex] propan-2-one and [tex]CH_3CH_2CH_2COCH_3[/tex] is pentan-2-one.
How many moles are in 4.28 x 1023 atoms of carbon?
0.711 moles C
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 4.28 × 10²³ atoms C
[Solve] moles C
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 4.28 \cdot 10^{23} \ atoms \ C(\frac{1 \ mol \ C}{6.022 \cdot 10^{23} \ atoms \ C})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 0.710727 \ moles \ C[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
0.710727 moles C ≈ 0.711 moles C
What is the main difference between rain and hail?
Answer:
Rain is a liquid and hail is a solid.
Two gases helium and x are released from one end of an evacuated long cylinder at the same time if it takes helium atoms 3 times faster than gas X to effuse from one end. What is gas X?
Answer:
Hypoflorous acid, HOF
Explanation:
From the question, we're told that the helium atoms effuses 3 times than the said gas X.
We can determine the rate of effusion by using the formula
r is inversely proportional to 1/√M, where M is the molecular mass of the gas.
And also,
r is inversely proportional to 1/t, where t is the time taken for effusion.
From both formulas I listed, we can conclude that t is directly proportional to √M. And thus we proceed.
The molecular mass of Helium is 4.
tHe = tX/3, where tx is the time taken for the unknown gas X
As of yet, we don't know the molecular mass of X. Next, we say that
tX/tHe =√Mx/MHe
3 = √Mx/4
If we square both the sides, to remove the square root, we have
9 = Mx/4
Mx = 36
The molecular mass of the unknown gas X is 36.
What is total distance traveled?
What is the displacement (change in positions)
Answer:
Exercise 1
a) 140 m
b) 100 m
c) 180 m
d) 140 m
Exercise 2
a) 20 yards
b) 30 yards
c) 20 yards
d) 55 yards
Exercise 3
a) 11 Kilometers
b) 7 Kilometers
Explanation:
Exercise 1
Distance from B to C = 140 m
Distance from to D = 100 m
Total distance = 100+40+40 = 180 m
Total displacement i.e. distance between A and D is 140 m
Exercise 2
a) Distance from B to C = 35 -15 = 20 yards
b) Distance from C to D = 5 + 35 = 30 yards
c) Distance from B to D = 5 + 15 = 20 yards
d) Displacement = 5 + 50 = 55 yards
Exercise 3
a) The total distance travelled = 5 + 2 + 4 = 11 Kilometers
b) Displacement = 5-2 + 4 = 7 Kilometers
If there is sufficient water in the reaction system, how many grams of KOH can be produced from 22.2 g of K?
Answer: 31.9 g of KOH can be produced from 22.2 g of KOH
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} K=\frac{22.2g}{39g/mol}=0.57moles[/tex]
[tex]2K+2H_2O\rightarrow 2KOH+H_2[/tex]
According to stoichiometry :
2 moles of [tex]K[/tex] produce = 2 moles of [tex]KOH[/tex]
Thus 0.57 moles of [tex]K[/tex] will produce=[tex]\frac{2}{2}\times 0.57=0.57moles[/tex] of [tex]KOH[/tex]
Mass of [tex]KOH=moles\times {\text {Molar mass}}=0.57moles\times 56g/mol=31.9g[/tex]
Thus 31.9 g of KOH can be produced from 22.2 g of KOH
Calculate the percent mass of hydrogen in ethane (C2H6).
Answer:
80.% carbon and 20.% hydrogen
Explanation:
Ethane has molecular formula C2H6. So What is the composition of carbon and hydrogen in ethane. its alot to explain but yea thats wht i got
2.56 x 10^13 molecules of HgO equates to how many moles of HgO?
Explanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
[tex]n = \frac{2.56 \times {10}^{13} }{6.02 \times {10}^{23} } \\ \\ \\ = 4.25 \times {10}^{ - 11} \: \: \: moles[/tex]
Hope this helps you
Calculate the pH of a solution prepared by dissolving 1.60 g of sodium acetate, CH3COONa, in 50.0 mL of 0.10 M acetic acid, CH3COOH(aq). Assume the volume change upon dissolving the sodium acetate is negligible. Ka of CH3COOH is 1.75 x 10^-5.
Answer:
pH = 5.35
Explanation:
Given 1.60 grams sodium acetate (NaOAc(aq))*** added to 50ml of 0.10M acetic acid (HOAc(aq)) solution.
Applying common ion effect keeping in mind that the addition of NaOAc provides the common-ion (OAc⁻).
HOAc(aq) ⇄ H⁺(aq) + OAc⁻(aq)
I 0.10m 1.32 x 10⁻³M ≈ ∅M* (1.6g/82.03g/mol) / 0.050L = 0.39M
C -x +x 0.39M + x ≈ 0.39M**
E 0.10M - x x 0.39M
≈ 0.10M
Ka = [H⁺][OAC⁻]/[HOAC] => [H⁺] = Ka·[HOAc] / [OAc⁻]
[H⁺] = (1.75 X 10⁻⁵)(0.10) / (0.39) = 4.5 x 10⁻⁶M
∴ pH = -log[H⁺] = -log(4.5 x 10⁻⁶) = -(-5.35) = 5.35
_______________________________________________
* [H⁺] before adding NaOAc = SqrRt(Ka · [HOAc]) = SqrRt(1.75 x 10⁻⁵· 0.10) = 1.32 x 10⁻³M. Since this concentration value is so small, the initial [H⁺] is assumed to be zero molar (∅M).
** The added [H⁺] is negligible and dropped in the ICE table. That is, adding ~[H⁺] in the order of 10⁻³M does not change the H⁺ ion concentration sufficiently to affect problem outcome and is therefore dropped in the ICE table.
*** Acetic Acid and Sodium Acetate are frequently written HOAc and NaOAc where the OAc⁻ anion is the acetate ion (CH₃COO⁻) for brevity.
The pH of the solution measures the acid of the liquid throughout the molar concentration of hydrogen ions in a solution.
[tex]\bold{CH_3COONa \ mass = 1.60\ g}\\\\[/tex]
Solution Volume (V) [tex]=50.0\ mL =0.05\ L\\\\[/tex]
[tex]\bold{CH3COONa \ molarity =0.10\ M }[/tex]
[tex]\bold{\text{Calculating the CH3COONa moles} =\frac{mass}{molar\ mass}}[/tex]
[tex]= \frac{1.60\ g}{82.03\frac{g}{mol}} \\\\=0.0195\ mol\\\\[/tex]
[tex]\bold{M = \frac{ \text{amount of solute moles} } { \text{solution volume in L} }}[/tex]
[tex]= \frac{0.0195\ mol}{0.05\ L}\\\\ =0.39\ M[/tex]
Using Henderson Hasselbach equation:
[tex]\bold{pH = -\log K_{a} + \log{[salt]}{[acid]}}\\\\[/tex]
[tex]=\bold{ -\log (1.75\times 10^{-5}) + \log ( \frac{0.39}{0.10}) }\\\\=\bold{ 4.757 + \log (3.9)}\\\\=\bold{ 4.757 + 0.5910}\\\\=\bold{ 5.348}\\\\=\bold{ 5.35}\\[/tex]
So, the final answer is "5.35".
Learn more:
brainly.com/question/1195974
What is the IUPAC name for the compound shown?
Which material is likely to slow the flow of electric charges the most? Explain.
Answer:
copper hiiiiiiiiiiiii
An inventor claims to have developed a new perfume that lasts a long time because it doesn't evaporate. Comment on this claim.
a. This would be impossible to make because the perfume would have to be pressurized in order to not evaporate.
b. This product is sure sweep the market making many happy customers.
c. In order to smell something, the molecules must evaporate and reach your nose. If the new perfume doesn't evaporate, it will not have an odor.
d. A perfume that does not evaporate could be toxic since the molecules never leave the skin.
Answer:
C
Explanation:
Perfume needs to evaporate in order to smell. If this perfume didn't evaporate, it would stay as a liquid and never smell.
It wouldn't be D, as no toxic perfumes is sold.
It's not A because perfume doesn't have to be pressurized in order to not evaporate.
It's not B, as it is a hasty conclusion to the claim. Plus, if the perfume did have an odor, even while not evaporating, the sales would be low as the product is that good.
Look at the diagram of a fuel cell below.
Which part of the fuel cell does A represent?
A. air
B. anode
C. cathode
D. electrolyte
Answer:
It is a electrolyte.
Explanation:
I took the test.
It represents an electrolyte.
What happens if electrolytes are low in the body?
A level under three can cause muscle weakness, spasms, cramps, paralysis, and respiratory problems. If it continues, kidney problems may occur.
What do electrolytes do for your body?Electrolytes are substances that have a natural positive or negative electrical charge when dissolved in water. They help your body regulate chemical reactions, maintain the balance between fluids inside and outside your cells, and more.
Learn more about electrolytes here https://brainly.com/question/14654936
#SPJ2
Identify the reactants and products in the following chemical equation: Zn +2HCl --> ZnCl2 + H2 *
20 points
A: Reactants: Zn & HCl Products: ZnCl2 & H2
B: Reactants: ZnCl2 & H2 Products: Zn & HCl
C: Reactants: Zn & H2 Products: ZnCl2 & HCl
Answer:
A.
Explanation:
zinc and hydrochloric acid reacts to form zinc chloride and hydrogen.
hope it helps. :)
Which substance has the highest ph?
A. Tomato
B. Unpolluted rainwater
C. Ammonium hydroxide
D. Orange juice
Answer:
c ammonium hydroxide nh4oh has higher ph value and its a base
plz mark me branliest
Answer:
c) ammonium hydroxide
Explanation:
ammonium hydroxide nh4oh has higher ph value, and it is an alkaline
2. A plant growing in response to the sunlight.
Gravitropism
Phototropism
Thigmotropism
Hydrotropism
Answer:
Phototropism.
Explanation:
Phototropism is the phenomenon of plants growing in response to light. This is a response to the plants to align or steer towards the source of sunlight, thereby becoming the 'path' to their growth.
The term "photo" means light and "tropism" means "growth" or movement towards". So, we can safely say that phototropism is the scientific and natural phenomenon of plants growing towards or in response to the sunlight.
Thus, the correct answer is phototropism.
Biological membranes are selectively permeable, allowing certain molecules to cross the membrane, but not others. Classify the molecules or ions depending on how they cross a biological membrane. Note that some of these examples may also utilize active transport to traverse a membrane. However, this question is limited to passive transport processes only. Match the followings with each others
a. Simple Diffusion
b. Facilitated Diffusion
1. steroid hormones
2. K+
3. N2
4. Glucose
Answer:
Following are the solution to these question:
Explanation:
Simple diffusion implies which molecules can move across a cell membrane instead of using the incorporated protein structure channels. Its flow of molecules across these canals is enabled by diffusion. It has steroid hormones and N2.
Facilitated diffusion of molecules via cell membranes, or active transportation, which would be the random mass transit process of molecules or ions via unique cellular membranes from the transmembrane. It has K+ and Glucose.