The amount of heat absorbed in kilojoules when 3.5 moles of water react is 1635.08 KJ
Balanced equation6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂ ΔH = 2803 KJ
From the balanced equation for above,
6 moles of water reacted to absorb 2803 KJ of heat
How to determine the heat absorbedFrom the balanced equation for above,
6 moles of water reacted to absorb 2803 KJ of heat
Therefore,
3.5 moles of water will react to absorb = (3.5 × 2803) / 6 = 1635.08 KJ of heat
Thus, 1635.08 KJ of heat were absorbed by the reaction.
Learn more enthalpy change:
https://brainly.com/question/11967318
What does the sum of oxidation numbers need to equal for a charged compound?
Answer:
The charge on the compound
Explanation:
The charge on the compound signifies that the compound is not in its neutral state.
Therefore, the oxidation state would be equal to the charge on the compound.
Answer:
The charge on the compound
Explanation:
The charge on the compound signifies that the compound is not in its neutral state.
Therefore, the oxidation state would be equal to the charge on the compound.
what is the percent (mass/volume) if 22 g of kcl is added to 75 ml of water to make 83 ml of solution
Considering the definition of volume percentage, the mass/volume percent in this solution is 26.5%.
Definition of mass/volume percentMass/volume percent is a measure of concentration that indicates the number of grams of solute in each 100 mL of solution.
In other words, the volume percent of a component in the solution is defined as the ratio of the mass of solute that is present in a solution, relative to the volume of the solution, as a whole.
The volume percentage of a solution is determined by the following expression:
[tex]mass/volume percent=\frac{mass of solute}{volume of solution}100[/tex]
Mass/volume percent in the solutionIn this case, you know:
mass of solute= 22 gvolume of solution= 83 mLReplacing in the definition of mass/volume percent:
[tex]mass/volume percent=\frac{22 g}{83 mL}100[/tex]
Solving:
mass/volume percent= 26.5 %
Finally, the mass/volume percent in this solution is 26.5%.
Learn more about mass/volume percent:
https://brainly.com/question/14707974
the ability of atoms to attract electrons from surrounding atoms is called
Answer:
Electronegativity
Explanation:
The ability of an atom to attract itself an electron pair shared with another atom in a chemical bond.
how many grams of lead II chloride are produced from the reaction of 15.3 g of NaCl and 60.8 gr of Pb(NO3)2?
The mass, in grams, of lead that will be produced from the illustrated reaction would be 71.47 grams
Stoichiometric reactionsFrom the balanced equation of the reaction:
Pb(NO3)2 + 2NaCl ---> PbCl2 + 2NaNo3
Mole ratio of Pb(NO3)2 and NaCl = 1:2
Mole of 15.3 g NaCl = 15.3/58.4
= 0.257 moles
Mole of 60.8 g PbCl(NO3)2 = 60.8/331.2
= 0.184 moles
Thus, NaCl is limiting.
Mole ratio of NaCl to PbCl2 = 1:1
Mas of 0.257 moles PbCl2 = 0.257 x 278.1
= 71.47 grams
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
Determine which reaction has the highest activation energy.
A. Burning charcoal
B. Melting ice
C. Combusting gasoline
D. Reacting metal and acid
Answer:
A.
Explanation:
The volume of a gas is 3.0 L, the pressure is 1.0 atm, and the temperature is 300 K. A chemist changes one factor while keeping another constant so that the new volume is 2.0 L. Which of the following could be the new conditions?
Group of answer choices
The final pressure is 0.5 atm, while temperature is kept constant.
The final temperature is 200 K, while pressure remains constant.
The final pressure is 0.2 atm, while temperature is kept constant.
The final temperature is 350 K, while pressure remains constant.
Given the data from the question, the final temperature is 200 K, while pressure remains constant.
Basic conceptsTo obtain the correct answer to the question, we shall consider two conditions:
Case 1 (temperature is constant) Case 2 (pressure is constant) Case 1 (Temperature is constant)We shall determine the new pressure by using the combined gas equation (P₁V₁ / T₁ = P₂V₂ / T₂) as illustrated below:
Initial volume (V₁) = 3 LInitial pressure (P₁) = 1 atmTemperature = constant New Volume (V₂) = 2 L New pressure (P₂) =?P₁V₁ / T₁ = P₂V₂ / T₂
Since temperature is constant, we have:
P₁V₁ = P₂V₂
3 × 1 = P₂ × 2
3 = P₂ × 2
Divide both side by 2
P₂ = 3 / 2
P₂ = 1.5 atm
Case 2 ( pressure is constant)We shall determine the new temperature by using the combined gas equation (P₁V₁ / T₁ = P₂V₂ / T₂) as illustrated below:
Initial volume (V₁) = 3 LInitial pressure (T₁) = 300 KPressure = constant New Volume (V₂) = 2 L New pressure (T₂) =?P₁V₁ / T₁ = P₂V₂ / T₂
Since pressure is constant, we have:
V₁ / T₁ = V₂ / T₂
3 / 300 = 2 / T₂
1 / 100 = 2 / T₂
Cross multiply
T₂ = 100 × 2
T₂ = 200 K
SUMMARY
when the temperature is constant, the new pressure is 1.5 atmWhen the pressure is constant, the new temperature is 200 KFrom the calculations made above, we can conclude that the correct answer is:
The final temperature is 200 K, while pressure remains constant.
Learn more about gas laws:
https://brainly.com/question/6844441
Answer:
b
Explanation:
When two or more magnetic fields overlap, the result is always a _____.
A combined magnetic field
B force of repulsion
C change in the location of the poles
D force of attraction
Answer:
A. Combined magnetic field
Answer:
A.combined magnetic field
Explanation:
CARRY ON LEARNING#
(Squirrels gather and store acorns for the winter, which is an example of a ___________ adaptation.)
A. Mimicry
B. Behavioral
C. Structural
D. Environmental
Answer:
C
Explanation:
A compound is 69.9% Fe and 30.1% O. What is the empirical formula?
Answer:
Fe2O3
Explanation:
get the ratio for both Fe and O using relative atomic mass and the percent as the mass
Oxidation Number of Carbon in C6H12O6
Correct option is C)
C
6
H
12
O
6
6x+12−12=0
C has oxidation number = 0
Sorry if my answers wrong.
I2 is produced by the reaction of 0.4235 mol of CuCl2 according to the following equation: 2CuCl2+4KI⟶2CuI+4KCl+I2. What volume of I2 gas is produced at STP?
Answer: 4.7432 L
Explanation:
Use stoichiometry: .4235 mol CuCl2 (1 mol I2 / 2 mol CuCl2)(22.4 L / 1 mol I2) = 4.7432 L :)
Determine whether or not the mixing of each of the two solutions indicated below will result in a buffer.
Drag the appropriate items to their respective bins.
Sinve CH3NH2 is weak base and its salt is CH3NH3Cl, mixing 125.0 mL of CH3NH2 and 120.0 mL of CH3NH3Cl so produce a buffer.
What is a buffer?A buffer is a solution which resists changes to its pH when a small quantity of strong acid or base is added to it..
A buffer is made from a weak acid and its salt or a weak base and its salt.
From the given options, CH3NH2 is weak base and its salt is CH3NH3Cl.
Therefore, mixing 125.0 mL of CH3NH2 and 120.0 mL of CH3NH3Cl so produce a buffer.
Learn more about buffers at: https://brainly.com/question/1385846
Chem dissociation!
Calculate degree of dissociation of electrolyte, if you know that in the 2 M solution there is 0.2 mol of this electrolyte as ions.
Answer:
C. Strong electrolytes can be expected to 100% dissociate in aqueous solution
Explanation:
how would changing the proportions in an alloy change its properties
Answer:
An alloy is a mixture of two or more metals which is produced with a specific proportion between metals. So, if the proportion is changed the physical characteristic would be changed as well. For example, brass musical instruments are made of brass which is a mixture (an alloy) of zinc and copper in a specific proportion. If you change a proportion, you will change the physical characteristic of brass musical instruments, and a sound they produce will be different.
Explanation:
0.75 mol hydrogen sulfide (H2S)
Answer:
• Information and media literacy
Directions
Read the instructions for this self-checked activity. Type in your response to each question, and check your answers. At the end of the activity, write
brief evaluation of your work.
Activity
Part A
Now that you have analyzed the resources provided in the lesson, write your own response to the question, What is the main reason the US Civil
War started? Base your
Explanation:
• Information and media literacy
Directions
Read the instructions for this self-checked activity. Type in your response to each question, and check your answers. At the end of the activity, write
brief evaluation of your work.
Activity
Part A
Now that you have analyzed the resources provided in the lesson, write your own response to the question, What is the main reason the US Civil
War started? Base your
Answer: =378.94000053g
Explanation:
I think that explains it
73.5 mol of P4O10 contains how many moles of P ? moles of P:
Answer:
294 moles of P
Explanation:
For every 1 mol of P4O10 contains 4 mol of P
so;
73.5 mol P4O10 × 4 mol P
1 mol P4O10
= 73.5 × 4
= 294 moles of P
73.5 mol of [tex]P_4O_{10}[/tex] contains 294 moles of P. In 1 mole of [tex]P_4O_{10}[/tex], there are 4 moles of P.
The International System of Units (SI) uses the mole (abbreviated as mol) as its basic unit to measure the amount of a substance. It is mostly used in chemistry and is defined as the volume of a substance that contains exactly 12 grammes of pure carbon-12 in terms of atoms (or equivalent amounts of molecules, ions, or particles). The fundamental notion that atoms combine in whole-number ratios to form compounds serves as the foundation for the concept of the mole. It makes it simple for scientists to convert between a substance's mass and the quantity of atoms or molecules it contains.
In 1 mole of [tex]P_4O_{10}[/tex], there are 4 moles of P.
=4 × 73.5 moles of P.
= 294 moles of P
To know more about moles, here:
https://brainly.com/question/15209553
#SPJ6
If 1.76 g of an ideal gas occupy 1.0 L at standard temperature and pressure (STP), what is the molar mass of the gas?
Answer:
Explanation:
Whenever you see molar masses in gas law questions, more often than not density will be involved. This question is no different. To solve this, however, we will first need to play with the combined ideal gas equation PV=nRT to make it work for density and molar mass. The derivation is simple but for the sake of time and space, I will skip it. Hence, just take my word for it that you will end up with the equation:M=dRTPM = molar mass (g/mol)d = density (g/L)R = Ideal Gas Constant (≈0.0821atm⋅Lmol⋅K) T = Temperature (In Kelvin) P = Pressure (atm)As an aside, note that because calculations with this equation involve molar mass, this is the only variation of the ideal gas law in which the identity of the gas plays a role in your calculations. Just something to take note of. Back to the problem: Now, looking back at what we're given, we will need to make some unit conversions to ensure everything matches the dimensions required by the equation:T=35oC+273.15= 308.15 KV=300mL⋅1000mL1L= 0.300 LP=789mmHg⋅1atm760mmHg= 1.038 atmSo, we have almost everything we need to simply plug into the equation. The last thing we need is density. How do we find density? Notice we're given the mass of the sample (0.622 g). All we need to do is divide this by volume, and we have density:d=0.622g0.300L= 2.073 g/LNow, we can plug in everything. When you punch the numbers into your calculator, however, make sure you use the stored values you got from the actual conversions, and not the rounded ones. This will help you ensure accuracy.M=dRTP=(2.073)(0.0821)(308.15)1.038= 51 g/molRounded to 2 significant figuresNow if you were asked to identify which element this is based on your calculation, your best bet would probably be Vandium (molar mass 50.94 g/mol). Hope that helped :)
What does it mean that our solar system is about 25,000 light-years from the center of the Milky Way?(1 point) It took our solar system 25,000 light-years to form. It took our solar system 25,000 light-years to form. It would take about 25,000 years for light to travel from our solar system to the center of the Milky Way. It would take about 25,000 years for light to travel from our solar system to the center of the Milky Way. There are 25,000 stars between our solar system and the center of the Milky Way. There are 25,000 stars between our solar system and the center of the Milky Way. It would take 25,000 years for humans to fly, using a rocket ship, from our solar system to the center of the Milky Way.
Answer: A light year is a measure of distance, for example, there is a big comet 5 light years away, it takes 5 years for light to get to the comet, and just like the galaxy, it would take 25,000 years for light to reach the center of the galaxy.
one revolution of the moon around earth takes_______ days.
Answer:It’s important to know WHY. Great explanations are what makes Brainly awesomeExplain everything. Imagine that the person who was asking, knows nothing at all so you need to start from the very beginningAlways include the steps and/or background required to get to the final answer. Let’s help other people understand and solve future problems on their ownShow all the calculation if it is a numerical question.
Explanation:
. Calculate how many times greater the change in phosphorous levels between 1965 and 1975 is than between 2008 and 2014. Show your work.
The number of times phosphorous is greater in not visible in the data
How to calculate the change in Phosphorus levelsThe steps involved for calculating the times the change in phosphorus level are :
First step: Determine the difference between Phosphorus levels in 1965 and 1975
Second step: Determine the difference between Phosphorus levels in 2008 and 2014
Last step: Determine the quotient by dividing first step by second step
Hence can conclude that The number of times phosphorous is greater in not visible in the data.
Learn more about phosphorus : https://brainly.com/question/25352398
Attached below is the missing Image related to your question
Starting with the following equation,
BaCl2(aq) + Na3PO4(aq) → Ba3(PO4)2(S) + NaCl(aq)
Calculate the mass in grams of BaCl2 that will be required to produce 50.5 grams of Ba3(PO4)2.
In the double displacement reaction between BaCl₂ and Na₃PO₄, 52.4 g of BaCl₂ are required to produce 50.5 g of Ba₃(PO₄)₂.
What is stoichiometry?Stoichiometry refers to the relationship between the quantities of reactants and products before, during, and following chemical reactions.
Step 1: Write the unbalanced equation.BaCl₂(aq) + Na₃PO₄(aq) → Ba₃(PO₄)₂(s) + NaCl(aq)
Step 2: Balance the equation.We will use the trial and error method. We will:
Multiply BaCl₂ by 3 to balance Ba atoms.Multiply Na₃PO₄ by 2 to balance P atoms.Multiply NaCl by 6 to get the balanced equation.3 BaCl₂(aq) + 2 Na₃PO₄(aq) → Ba₃(PO₄)₂(s) + 6 NaCl(aq)
Step 3: Calculate the mass of BaCl₂ required to produce 50.5 g of Ba₃(PO₄)₂.The mass ratio of BaCl₂ to Ba₃(PO₄)₂ is 624.69:601.93.
50.5 g Ba₃(PO₄)₂ × 624.69 g BaCl₂/601.93 g Ba₃(PO₄)₂ = 52.4 g BaCl₂
In the double displacement reaction between BaCl₂ and Na₃PO₄, 52.4 g of BaCl₂ are required to produce 50.5 g of Ba₃(PO₄)₂.
Learn more about stoichiometry here: https://brainly.com/question/16060223
9. Using the balanced equation from Question #8, how many grams of lead will be produced if 2.54 grams of PbS is burned with 1.88 g of O2? Express your answer to the correct number of significant figures and you must show all work in the form of dimensional analysis as shown in Lesson 4. (Hint: be sure to work the problem with both PbS and O2).
Answer: 2.24 grams of Pb
Explanation:
Step 1
Balanced chemical reaction;
2PbS + 3O2 → 2Pb + 2SO3
Step 2
Moles of both PbS and O2
Moles = mass / molar mass
Moles of PbS = 2.54 g / 239.3 g/mol = 0.0108 moles
Moles of O2 = 1.88 / 32 g/mol = 0.0588 moles
Step 3
Finding the limiting reactant.
Limiting reactant, is that reactant which is completely used in the reaction;
If we assume that PbS is the limiting reactant;
We have 0.0588 moles of O2. This needs ( 0.0588 * 2) / 3 = 0.0392 moles of PbS to fully react. But we have only 0.0108 moles of PbS available. That means that the PbS will be completely consumed hence the limiting reactant
If we assume O2 is the limiting reactant;
We have 0.0108 moles of PbS. That needs ( 0.0108 * 3) / 2 = 0.0162 moles of O2. But we have 0.0588 moles of O2 which is in excess further confirming that PbS is the limiting reactant since it will be depleted in the reaction.
Step 4
Moles of lead
For this step we apply the mole ratios with the limiting reactant;
Mole ratio of PbS : Pb = 2 : 2 = 1 : 1
Therefore;
Moles of Pb = (0.0108 moles * 1 ) 1
Moles of Pb =0.0108 moles
Step 5
Mass of Pb
Mass = moles * molar mass
Mass of Pb =0.0108 moles * 207.2 g/mol
Mass of Pb = 2.24 grams
What is molarity of 47.0 g KCl dissolved in enough water to give 375 mL of solution?
This question provides us –
Weight of [tex] \bf KCl [/tex] is = 47 gVolume, V = 375 mL__________________________________________
Molar Mass of [tex]\bf KCl [/tex] –[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf 39.0983 \times 35.453 [/tex]
[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf 74.5513[/tex]
Using formula –
[tex]\qquad[/tex] [tex]\purple{\twoheadrightarrow\bf Molarity _{(Solution)} = \dfrac{ W\times 1000}{MV}}[/tex]
[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf Molarity _{(Solution)} = \dfrac{ 47 \times 1000}{74.5513\times 375}[/tex]
[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf Molarity _{(Solution)} = \dfrac{47000}{27956.7375}[/tex]
[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf Molarity _{(Solution)} = \cancel{\dfrac{47000}{27956.7375}}[/tex]
[tex]\qquad[/tex] [tex] \twoheadrightarrow\bf Molarity _{(Solution)} = 1.68117M [/tex]
[tex]\qquad[/tex] [tex]\pink{\twoheadrightarrow\bf Molarity _{(Solution)} = 1.7M} [/tex]
Henceforth, Molarity of the solution is = 1.7M___________________________________________
write an equation to show the effect of heat on the nitrate of silver
Answer:
2AgNO³(l) → 2Ag(s) + O²(g) + 2NO²(g)
Explanation:
I used powers ³,²,²
So change them to be down
Select the correct answer.
Iron oxide reacts with aluminum to give aluminum oxide and iron. What kind of chemical reaction is this?
Answer:
Single-replacement reaction
Explanation:
Single-replacement reactions, aka. single-displacement reactions, involve one element/ion in a compound being replaced by another element/ion. In this case, aluminum is replacing the iron in the compound.
If you need help visualizing, the equation looks like this:
Fe₂O₃ + Al³⁺ --> Al₂O₃ + Fe³⁺
Question 13 options:
A) What is the volume (L) of 2.5 moles of oxygen at STP?
B) What is the volume (L) of 2.5 moles of nitrogen at STP?
At STP
one mol of oxygen weighs=22.4LNo of moles=2.5mol
Total volume:-
2.5(22.4)56Lwhy are hydrocarbons insoluble in water
Answer:
Hydrocarbons are insoluble in water because they are non-polar compounds while water is a polar solvent. By principle, like dissolves like. Nonpolar solvents dissolve nonpolar solutes and polar solvents dissolve polar solutes.
Explanation:
please brainliest me
hope it helps
Hydrocarbons are insoluble in water because :-
1)Hydrocarbons are nonpolar whereas water is polar. (like dissolves like).
2) Hydrocarbons and water do not exhibit appropriate solvent-solute interactions. Hydrocarbons only form very weak dispersion forces whereas water produces strong polar hydrogen bonding interactions.
Explanation:
Hope it helps you!!
Where are the most greenhouse gases generated during the production of electricity?
Answer: city w
Explanation:
cities w,y,z all use renewable energy (sun, water, wind) which offput any greenhouse emmissions,
city w uses coal which produces greenhouse gases when used (burnt).
hope this helped! ♡
What type of molecule is cis-2-pentene?
O A. Alkane
B. Alkyne
C. Branched alkane
D. Alkene
The given molecule, cis-2-pentene, is an Alkene. The correct option is D. Alkene
Saturated & Unsaturated HydrocarbonsAlkanes, Alkenes, and Alkynes are examples of simple hydrocarbons.
Alkanes are the simplest organic compounds. They have only single bonds between carbon atoms and are called saturated hydrocarbons. Their nomenclature usually ends in -ane.Alkenes on the other hand have at least one carbon-carbon double bond. Their nomenclature usually ends in -ene. Alkynes have one or more carbon-carbon triple bonds.Their nomenclature usually ends in -yne. Alkenes and alkynes are called as unsaturated hydrocarbons.The given molecule is cis-2-pentene
Since the name of the molecule ends in "ene", the molecule is an Alkene.
Hence, the given molecule, cis-2-pentene, is an Alkene. The correct option is D. Alkene
Learn more on Saturated & Unsaturated Hydrocarbons here: https://brainly.com/question/24324797
Answer: Alkene
Explanation: just took tha test
Why do we have to decide what to do in a day?
Answer:
otherwise you will be bord and have nothing to do
Explanation: