The elevation in temperature of water by the addition 4.27 g of sucrose to 15.2 grams is 0.42 °C. Thus the boiling point changes from 100 to 100.42 °C.
What is boiling point?Boiling point of a substance is the temperature at which the pressure of gas above the liquid phase equals the atmospheric pressure where conversion of liquid to solid takes places.
By the addition of a non-volatile solid to the solution, the boiling point increases and the increase in boiling point ΔT is proportional to the molality of the solution.
ΔT = Kb m
Where, Kb is called the ebullioscopy constant. Kb for water is 0.52 K Kg/mol.
Molar mass of sucrose = 342 g/mol
no.of moles in 4.27 grams = 4.27 /342 = 0.0124.
mass of solvent = 15.2 = 0.0015 Kg.
Molality = no/ of moles of solute/ mass of solvent in kg
= 0.015 Kg ×0.0124 mol
= 0.82 mol/Kg.
Now, the increase in temperature ΔT = 0.82 mol/Kg × 0.52 K Kg/mol.
= 0.42 °C
Thus, the new boiling point will be 100 + 0.42 °C = 100.42 °C.
To find more on elevation of boiling point, refer here:
https://brainly.com/question/16922336
#SPJ5
Lichens, a combination of fungi and algae, grow on the surface of rocks. They secrete acids that slowly eat away at the surface of the rock.
Is this an example of chemical or physical weathering?
physical
chemical
Answer:
Chemical
Explanation:
it is a chemical weathering because it is eating away at the rock instead of actively eroding the rock.
Escaping from the haunted house, Anna ran home immediately to her chemistry lab
back at the high school. After analysis of the gold heart, she found the heart was not
composed of pure gold, but gold (III) oxide (Au203). What percentage (by mass) was
gold in the heart?
a) 10.9% Au
C) 89.1% Au
b) 81.2% Au
d) 92.9% Au
This is science
Can photosynthesis still take place if plants do not receive enough water from the water cycle? Why or why not?
Answer:
No.
Explanation:
Photosynthesis is the light dependent process which must occur for the plant to live. This process also requires water and carbon dioxide. If photosynthesis does not occur, the plant will die.
If plants do not receive enough water from the water cycle, photosynthesis can be affected, and in severe cases, it may not take place at all.
Why photosynthesis requires water?Photosynthesis requires water as one of its essential inputs, as it is used in the process of creating glucose and oxygen from carbon dioxide and light energy. Therefore, if plants do not receive enough water from the water cycle, photosynthesis can be impacted, and in severe cases, it may not take place at all.
Water is not only a raw material in photosynthesis, but it is also necessary for the regulation of plant cells' internal pressure, which is essential for maintaining their shape and structure. Without enough water, the cells' internal pressure decreases, causing them to shrink and lose their rigidity. This process is known as wilting.
Hence, water is essential for plant growth and photosynthesis, and if plants do not receive enough water from the water cycle, it can lead to wilting, stunted growth, and a reduction in photosynthesis.
Learn more about photosynthesis, here:
https://brainly.com/question/29764662
#SPJ3
what color does a green objcet appear under red light
Answer:
black??
Explanation:
CH3OH=CO+H2 Balance the equations and tell the atoms. Giving brainliest
Answer:
CII + 4 e- → C-II (reduction)
4 H0 - 4 e- → 4 HI (oxidation)
Explanation:
Answer:
The correct answer should be:
[blank] CO + [2] H2 => [blank] CH3OH
or
CO + [2] H2 => CH3OH
Which of the following organs produce enzymes that help chemical digestion happen?
A liver
B small intestine
C large intestine
D rectum
Answer:
A liver
B small intestine
Molar mass of 500g of Cl2
Explanation:
What's Your Question ??..
HELP ME PLS ASAP ILL GIVE BRAINLY
Whether you live in a tropical climate, a temperate climate, or a polar climate, you share something with the rest of the world- your climate is influenced by the latitude where you live. Which best describes why latitudes closer to the equator have warmer climates?
Latitudes closer to the equator are at lower elevations than latitudes away from the equator
Latitudes closer to the equator receive more solar energy than latitudes away from the equator
Latitudes closer to the equator are nearer to ocean currents than latitudes away from the equator
Latitudes closer to the equator get more wind carrying energy in the form of heat than latitudes away from the equator
Answer: Latitudes closer to the equator receive more solar energy than latitudes away from the equator
Explanation:
Is a hydrogel a smart polymer/stimuli-responsive polmer?
Answer:
Polymer scientists have been trying to mimic this behavior by creating so called smart polymers. ... One of the most important classes of stimuli-responsive polymers used for controlled drug delivery is crosslinked polymer networks, e.g., hydrogels and microgels.
Explanation:
8.0 mol of methane gas reacts completely in a 2.00L container containing excess O2 in 3.2s. Find average rate of consumption of methane
Answer:
1.3 M/s
Explanation:
Step 1: Given data
Initial amount of methane (ni): 8.0 molFinal amount of methane (nf): 0 mol (it reacts completely)Volume of the container (V): 2.00 LTime elapsed (t): 3.2 sStep 2: Calculate the average rate of consumption of methane
Methane burns in excess oxygen according to the following equation.}
CH₄ + 2 O₂ ⇒ CO₂ + 2 H₂O
We can calculate the average rate of consumption of methane (r) using the following expression.
r = - Δn/V × t = - (nf- ni) / V × t
r = - (0 mol - 8.0 mol) / 2.00 L × 3.2 s = 1.3 M/s
The area of a circle is 38.5 cm². Calculate.
(a) the radius
The Answer is 3.501591994
Explanation:
area of circle = πr^2
radius=
39.5 = 22/7*r^2
r^2 = 7*39.5/22
= 12.56
r=3.5
How many grams are in 1.52 moles of PC13? (molar mass: 137.33 g/mol)
How many atoms are in an oxygen molecule?
Answer:
two atoms
Explanation:
In its stable molecular form, oxygen exists as two atoms and is written O2. to distinguish it from an atom of oxygen O, or ozone, a molecule of three oxygen atoms, O3. Even though each of these is all oxygen, combining atoms of the same element may give very different properties to the molecule.
What property of ocean water affects climate the most?
O A. Its salt content
B. Its density
O C. Its heat capacity
O D. Its freezing point
Answer:
c
Explanation:
Select the correct answer.
An iron bar at 200°C i placed in thermal contact with an identical iron bar at 120°C in an isolated system. After 30 minutes, both iron bars are at
160°C. the iron bars were placed in thermal contact in an open system instead of an isolated system, how would the results be different?
Assume that the room temperature is 25°C.
O A The temperatures of the iron bars after 30 minutes would be less than 160°C because heat would be lost to the surroundings.
O B. it would take more than 30 minutes for both iron bars reach 160°C because heat would be transferred less efficiently.
O C. The temperatures of both iron bars would increase as they absorb heat from the surroundings.
O D. The temperatures of both iron bars would decrease because pieces of them would be lost to the surroundings.
Reset
Next
© 2021 Edmentumn. All rights reserved.
answer asap pls i give brainliest
Answer:
B. Revolution is a planet's movement around the sun causing four seasons the occur. Rotation is the spinning of the planet on its axis causing day and night.
How many formula units (f.u.'s) of GaF3 are present in 145 g of GaF3?
A)2.98 x 1024
B)1.89 x 1025
C)8.22 x 1023
D)6.89 x 1023
Which feature causes a gap in the geologic record?
extrusion
fault
o intrusion
erosion
Answer:
Hi, there the answer is
A)extrusion
Explanation:
The feature that causes a gap in the geologic record is called extrusion.
What is extrusion in geologic record?Sometimes magma can force itself through a crack or fault in the rock at the Earth's surface. It pours out over the Earth's surface in a volcanic eruption. This process is called extrusion. The rocks that form from extruded magma are called extrusive igneous rocks.
Direct Extrusion, Indirect Extrusion, Hydrostatic Extrusion and Lateral or Vertical Extrusion are some types of extrusion.
Lava that hardens on the surface is called an extrusion. The rock layers below an extrusion are always older than the extrusion. Beneath the surface, magma may push into bodies of rock. There, the magma cools and hardens into a mass of igneous rock called an intrusion.
Therefore, The feature that causes a gap in the geologic record is called extrusion.
Learn more about extrusion, here:
https://brainly.com/question/30554658
#SPJ5
How many moles of calcium oxide are formed when 3 moles of calcium react with oxygen?
Answer:
3 moles of CaO
Explanation:
The chemical balanced equation is;
2Ca + O₂ → 2CaO
The ratio of calcium(Ca) to Calcium Oxide(Cao) in this equation is 2:2.
Now, when 3 moles of calcium react with oxygen, Cao produced will be;
3 moles of O₂ × 2 moles of CaO/2 moles of Cao = 3 moles of CaO
How much heat is absorbed if a 30.0 gram sample of carbon is heated from 10.5 degrees Celsius to 22.2 degrees celsius
Answer:
A lot of heat
Explanation:
aluminum oxide solube or insolube
Answer:
Reaction with water: Aluminum oxide is insoluble in water and does not react like sodium oxide and magnesium oxide.
what is the name of the chemical used for bleach in sugar industries
Answer: I think Sulfur dioxide
Explanation: sulfur dioxide is highly known as a bleaching agent in chemical factories during chemical processes and production
I am not to sure about bleaching in the SUGAR FACTORIES but if u need more explanation about sulfur dioxide in bleaching feel free to COMMENT!!!
PLEASE HELP DUE IN 20 MINUTES Find the empirical formula for the following problem. Remember to show your work if you want
to earn credit.
1. One mole of an unknown compound has 36.0 g of carbon and 6.0 g of hydrogen. What
is the empirical formula of the unknown compound? (Hint: You will want to reduce to find
the empirical formula)
Given: Carbon: 36.0 grams
1 mol C = 12.0 g
Hydrogen: 6.0 g
1 mol H = 1.0 g
Unknown: empirical formula
Solve:
Answer:
CH2
Explanation:
The empirical formula is the simplest formula of a chemical compound. It shows the ratio in which constituent atoms are combined in the compound.
To obtain the empirical formula, we divide the given mass of each element by the relative atomic mass of that element.
C- 36.0 g/12.0 g H- 6.0g/1.0g
C- 3 H-6
Divide through by the lowest ratio;
C-3/3 H- 6/3
C-1 H-2
Hence the empirical formula of the compound is
CH2
between 316 m/s and 1162 m/s, which has the faster speed
Answer:
1162m/s is the faster speed
Explanation:
The speed is a physical property defined as the distance travelled of an object in determined amount of time.
A speed of 316m/s means the object is travelling 316 meters per second transcurred.
In the same way, the speed of 1162m/s means the object is travelling 1162m per second.
As the second object is travelling more distance per second than the first,
1162m/s is the faster speedThe half life of tritium is 12.3 years. How much sample will remain if you start with 425g of tritium that is found after 4 half lives?
Answer:
26.56g
Explanation:
The half life of an isotope decay is the time transcurred when the initial amount of the isotope decays to the half of its amount.
For the problem, when 1 half life transcur, the sample has a mass of:
425g / 2 = 212.5g
When 2 half lives transcur:
212.5g / 2 = 106.25g
3 half lives:
106.25/2 = 53.13g
And the amount that is found after 4 half lives is:
53.13/2 =
26.56gA una mezcla de 300g, formada con 60% P/P de Hierro y 40% P/P de Arena, se le adicionan 135g de Cobre y 2,77g de Aluminio. ¿Cuál es la concentración final P/P de cada uno de los componentes?
Answer:
[tex]\%P/P_{hierro}=41.1\%\\\\\%P/P_{arena}=24.4\%\\\\\%P/P_{cobre}=30.8\%\\\\\%P/P_{aluminio}=0.6\%[/tex]
Explanation:
¡Hola!
En este caso, dado que estamos tratando con problem sobre porcentaje peso/peso de hierro, arena, cobre y aluminio, primero debemos calcular la masa inicial de estos dos primeros en la mezcla original de acuerdo con:
[tex]m_{hierro}=300g*0.60=180g\\\\m_{arena}=300*0.40=120g[/tex]
Ahora si podemos calcular la masa de la mezcla final como la suma de las masas de todos los constituyentes de la mezcla:
[tex]m_T=180g+120g+135g+2.77g=437.77g[/tex]
Finalmente, podemos calcular los porcentajes P/P como se muestra a continuación:
[tex]\%P/P_{hierro}=\frac{180g}{437.77g} *100\%=41.1\%\\\\\%P/P_{arena}=\frac{120g}{437.77g} *100\%=24.4\%\\\\\%P/P_{cobre}=\frac{135g}{437.77g} *100\%=30.8\%\\\\\%P/P_{aluminio}=\frac{g}{437.77g} *100\%=0.6\%[/tex]
¡Saludos!
Make a list of all the possible human sources of carbon dioxide. Giving brainliest
if i put regular air into a ziplock bag does carbon dioxide come out?
Write the Keq for the dissolving of salt: NaCl → Na+ + Cl-.
The equilibrium constant of this reaction can be called the solubility product and is written as; Ksp = [Na^+] [Cl^-]
What is equilibrium constant?The term equilibrium constant refers to the number that shows the extent to which reactants are converted into products.
In this case, the equilibrium constant of this reaction can be called the solubility product and is written as; Ksp = [Na^+] [Cl^-]
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ2
What should be the labels on the X-axis and Y-axis?
Answer Is Any Real Numbers, Such As 6,15,21.