if a charge of magnitude 4e is being held in place 3nm from a charge of -5e which is also being held in place. what is the potential energy of the system

The Attendance was low.

We know, The left edge of the box indicates the lower quartile, representing the value below which the first 25% of the data is located.

Similarly, the right edge of the box represents the upper quartile, indicating that 25% of the data is situated to the right of this value.

From the given box plot we can say that the Attendance was not high because the quartiles located.

Now, from plot we can say that quartiles are clustered towards the left on the number line.

This means that the Attendance was low.

Learn more about Quartiles here:

https://brainly.com/question/29809572

#SPJ1

The area of the attached quadrilaterals are

area of rhombus = 20 square units

area of rectangle  = 60 square units

none of the above

The formula for area of rhombus is

Area = base × height

Area = 5 × 4

= 20 square units

The formula for area of rectangle is

Area = length × width

Area = 10 × 6

= 60 square units

The formula for area is

Area = base × height

Area = 7 × 4

= 28 square units

Learn more about area at

https://brainly.com/question/25292087

#SPJ1

In order to establish the significance of a correlation, in addition to the correlation coefficient, it is necessary to know the number of paired scores (sample size) to determine the reliability and statistical significance of the correlation. So the correct option is A.

The number of paired scores, also known as the sample size, is essential in determining the significance of a correlation. The reliability and statistical significance of a correlation are influenced by the sample size because a larger sample size provides more information and reduces the influence of random variation.

When calculating a correlation coefficient, it is necessary to have an adequate number of data points or paired scores to ensure that the observed correlation is not purely due to chance. A larger sample size increases the confidence in the correlation estimate and allows for more accurate inference about the population correlation. Statistical tests, such as hypothesis testing or calculation of p-values, rely on the sample size to determine if the observed correlation is statistically significant or likely to have occurred by chance.

To know more about correlation coefficient,

https://brainly.com/question/30664914

#SPJ11

The equation that shows the operations that Jeremy performs to get y is given as follows:

y = 4x - 3.

The slope-intercept equation for a linear function is presented as follows:

y = mx + b

The coefficients m and b represent the slope and the intercept, respectively, and are explained as follows:

When x increases by 2, y increases by 8, hence the slope m is given as follows:

m = 8/2

m = 4.

Hence:

y = 4x + b

When x = 2, y = 5, hence the intercept b is obtained as follows:

5 = 4(2) + b

b = 5 - 8

b = -3.

Thus the equation is:

y = 4x - 3.

The problem is given by the image presented at the end of the answer.

More can be learned about linear functions at https://brainly.com/question/15602982

#SPJ1

the value of double integral is 2/21.

Sketching the region, R: Now, we will sketch the given region R. By observation, the equation for the region enclosed by

x = y²

and x = -y² + 2

is y = √(x)

and y = -√(x)

respectively. This can be seen by solving the two equations as follows:

y² = x and

y² = 2 - x.

By adding the two equations, we get:

2y² = 2, or

y² = 1,

which implies that

y = ±1.

Since y = ±√(x) passes through the point (1, 1) and (1, -1), the required region is enclosed by the parabolas y² = x and

y² = 2 - x and bounded by the lines

y = 1 and

y = -1.

Therefore, the region R is given by the shaded region in the figure below:Set up the iterated integrals:The required iterated integrals are:

∫[1,-1] ∫[0, y²] dy dx + ∫[1,-1] ∫[2-y², 2] dy dx

Hence, the iterated integrals for the double integral using the suitable orders of integration are mentioned above.Evaluate the double integral:Let us evaluate the iterated integral

∫[1,-1] ∫[0, y²] dy dx.

∫[1,-1] ∫[0, y²] dy dx

= ∫[1,-1] [x³/3]₀^(y²) dx

= ∫[1,-1] y⁶/3 dy

= 2/3 ∫[0, 1] y⁶ dy

= 2/3 [y⁷/7]₀¹

= 2/21.

To know more about integral visit;

brainly.com/question/31059545

#SPJ11

(1):  By SSS similarity ΔABC and ΔEDF are similar.

(2):  ΔABC and ΔCDF are similar by AA similarity.

For given triangles 1:

Since we know that,

The Side-Side-Side (SSS) criterion for triangle similarity says that "if the sides of one triangle are proportional to (i.e., in the same ratio as) the sides of the other triangle, then their corresponding angles are equal and the two triangles are similar."

In the given triangle,

ΔABC and ΔEDF

According to the SSS similarity theorem,

⇒ AD/ED = AC/DF = CB/EF

⇒  4/2 = 2/1 = 6/3

⇒ 2 = 2 = 2

Hence, ΔABC and ΔEDF are similar by SSS similarity.

For the given triangles in 2:

Since we know that,

According to the Angle-Angle (AA) criterion for triangle similarity, "if two angles of one triangle are respectively equal to two angles of another triangle, then the two triangles are similar."

In the given triangles ΔABC and ΔCDF

From figure,

∠A = ∠ D

∠C are equal for both the given triangles

These are similar by AA similarity.

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

Answer:

13 inches (to nearest inch)

Step-by-step explanation:

if volumes are in ratio 216:64, then lengths/heights must be in ratio

∛216: ∛64

= 6:4.

this can be simplified to 3:2.

3/2 = 1.5.

that means the height of larger cone is 1.5 times taller than height of the smaller cone.

let's call height of smaller cone d.

20 = 1.5d

d = 20/1.5

= 13.33

= 13 inches (to nearest inch)

Answer:

Work = Change in Kinetic Energy + Thermal Energy

Work = 30 J + 10 J

Work = 40 J

Therefore, the work done by the force is 40 J.

The number of nails that the construction worker buy in the second week is 100 1/4 pounds.

Given that,

One week a construction worker brought 40 1/10 pounds of nails.

The next week he bought 2 1/2 times as many nails as the week before.

We have to find the number of nails he bought in the second week.

We have,

Number of nails he bought in the first week = 40 1/10 pounds

Number of nails he bought in the second week = 2 1/2 × 40 1/10

                                                                                = 2.5 × 40.1

                                                                                = 100.25

                                                                                = 100 1/4 pounds

Hence the number of nails he bought in the second week is 100 1/4 pounds.

Learn more about Multiplication here :

https://brainly.com/question/14332252

#SPJ1

The correct graph of the function f(x) = log3x is option 2.

"On a coordinate plane, a logarithmic function approaches the y-axis in quadrant 4 and then increases into quadrant 1 and approaches y = 2. It goes through (1, 0) and (3, 1)."

A logarithm with the base 3 is represented by the function f(x) = log3x. The base in logarithmic functions controls how the graph behaves.

The graph begins at negative infinity on the left side and moves towards the y-axis in quadrant 4 when the base is bigger than 1, as it is in this instance with base 3.

It then starts to ascend, passing through the point (1, 0), and it keeps getting higher as x grows. As x gets closer to positive infinity, but never reaches it, the graph moves towards y = 2.

Additionally, it addresses points (3) and (1).

Therefore, the graph of f(x) = log3x is the second statement.

Learn more about logarithmic function click;

https://brainly.com/question/30339782

#SPJ1

Venn Diagram

Venn diagram is use in answering word problems that involve two sets or three sets. It is the principal way of showing sets diagrammatically. This method consists of entering the elements of a set into a circle or circles.

To represent the given results, let us analyze the problem.

The problem above involves three sets: cats, dogs and birds. - Meaning, we need to make three circles. Then label each with cats, birds and dogs respectively.

10 students liked cats and birds but not dogs - Write 10 in the overlap of cats and birds.

6 students liked cats and dogs but not birds - Write 6 in the overlap of cats and dogs.

2 students liked dogs and birds but not cats - Write 2 in the overlap of birds and dogs.

2 students liked all three pets - Write 2 in the overlap of birds, cats and dogs.

9 students liked dogs only - Write 9 inside the dog part.

10 students liked cats only - Write 10 inside the cat part.

1 student liked birds only - Write 1 in inside the bird part.

I'll attach the venn diagram.

Definition of venn diagram:

brainly.ph/question/164552

Examples of venn diagram:

brainly.ph/question/203406

#LetsStudy

Answer:

  (A)  -4 ≤ x

Step-by-step explanation:

You want the number line graph that shows the solution to -2x +6 ≤ 14.

The inequality symbol used in the problem is ≤. The "or equal to" portion of this symbol tells you that the dot on the graph will be a solid dot, not an open circle. (Eliminates choices C and D.)

When 2x is added to both sides of the equation, you have ...

  6 ≤ 14 +2x

The direction of the inequality symbol tells you that larger values of x will be in the solution set. (Eliminates choice B.)

The only feasible graph is that of choice A.

If you divide the last inequality above by 2, you get ...

  3 ≤ 7 +x

Subtracting 7 makes it ...

  -4 ≤ x

The graph of this is a solid dot at x=-4, and shading to the right, choice A.

__

Additional comment

If you write the inequality with using a left-pointing inequality symbol:

  -4 ≤ x

then the relative positions of the number and the variable tell you where the shading is in relation to the number. Here, the variable is on the right, so the shading (values of x) will be to the right of the number.

<95141404393>

The length of the curve defined by the polar equation r = 8a cos(theta) over the interval [-π/16, π/16] is πa units.

To find the length of the curve defined by the polar equation r = 8a cos(theta) over the interval [-π/16, π/16], we can use the arc length formula for polar curves.

The arc length formula for a polar curve is given by:

L = ∫[a, b] √(r^2 + (dr/dθ)^2) dθ

In this case, we have:

r = 8a cos(theta)

dr/dθ = -8a sin(theta)

Substituting these values into the arc length formula and simplifying, we get:

L = ∫[-π/16, π/16] √(64a^2 cos^2(theta) + 64a^2 sin^2(theta)) dθ

L = ∫[-π/16, π/16] √(64a^2) dθ

L = 8a ∫[-π/16, π/16] dθ

Integrating the constant term, we have:

L = 8a [θ] from -π/16 to π/16

L = 8a (π/16 - (-π/16))

L = 8a (2π/16)

L = 8a (π/8)

L = πa

Therefore, the length of the curve defined by the polar equation r = 8a cos(theta) over the interval [-π/16, π/16] is πa units.

To learn more about Interval:

brainly.com/question/11051767

#SPJ11

The sum of Kelly and Avril's complex numbers is:
-814 - 200i

To find the sum of Kelly and Avril's complex numbers, we simply add the real parts and the imaginary parts separately.
Real part of Kelly's number = 508
Real part of Avril's number = -1322
Sum of real parts = 508 + (-1322) = -814
Imaginary part of Kelly's number = 1749i
Imaginary part of Avril's number = -1949i
Sum of imaginary parts = 1749i + (-1949i) = -200i
Therefore, the sum of Kelly and Avril's complex numbers is:
-814 - 200i
To find the sum of Kelly's and Avril's complex numbers, simply add the real parts and the imaginary parts separately:
Kelly's number: 508 + 1749i
Avril's number: -1322 + 1949i
Sum: (508 - 1322) + (1749i + 1949i) = -814 + 3698i
So, the sum of their complex numbers is -814 + 3698i.

To know more about complex numbers visit:

https://brainly.com/question/20566728

#SPJ11

The product of a rational number and an irrational number is always irrational. So the given statement is true.

To understand why, let's assume we have a rational number represented as p/q, where p and q are integers and q is not equal to zero. We also have an irrational number represented as √2.

If we multiply the rational number p/q by the irrational number √2, we get:

(p/q) * √2 = (p√2)/q

Since √2 is irrational and q is a non-zero integer, the numerator p√2 remains irrational. Dividing an irrational number by a non-zero integer does not change its irrationality.

Therefore, the product (p√2)/q is an irrational number, proving that the product of a rational number and an irrational number is irrational.

To know more about irrational number,

https://brainly.com/question/28973373

#SPJ11

Answer:

Step-by-step explanation:

You want the dimensions of a rectangle if adding 2 m to its width makes it a square with an area of 36 m².

The area of a square is the square of its side length, so the side length of the square is ...

  A = s²

  s = √A = √(36 m²) = 6 m

The problem statement tells you this dimension is 2 m more than the width of the rectangle. Hence that width is ...

  6 m - 2m = 4 m

The rectangle is 4 m wide and 6 m long.

Check

The length is 2 m less than twice the width: (2)(4 m) -2 m = 6 m, the value we show above.

<95141404393>

a. We can form the change of coordinates matrix P as: P = [b₁]c b₂]c   =  [2, 8]  [0, 5]  [-5, 0]

Therefore, [x]c is the column vector [-20, -1] representing the coordinates of x with respect to the basis C.

b. We have x = 2b₁ - 3b₂ = 2(2c₁ - 5c₂) - 3(8c₁ + 5c₂) = (-22c₁ - 37c₂) Therefore, we need to find [x]

c. We compute this as follows:

[x]c = [a, b]

= [(-22)(2) + (-37)(0), (-22)(0) + (-37)(5)]

= [-44, -185]

Therefore, [x]c is equal to [-44, -185].

To find the change-of-coordinates matrix from B to C, we need to express the basis vectors of B (b1, b2) in terms of the basis vectors of C (c₁, c₂).

Given that b₁ = 2c₁ + 7c₂ and

b₂ = 8c₁ + 5c₂, we can write the change-of-coordinates matrix P as:

P = [b₁ | b₂]

= [2c₁ + 7c₂ | 8c₁ + 5c₂]

= [2 8]

[7 5]

This matrix P represents the linear transformation that maps coordinates relative to basis B to coordinates relative to basis C.

b. To find [x]c for x = 2b₁ - 3b₂, we can use the change-of-coordinates matrix P obtained in part (a).

First, we express x in terms of the basis vectors of C:

x = 2b₁ - 3b₂

= 2(2c₁ + 7c₂) - 3(8c₁ + 5c₂)

= 4c₁ + 14c₂ - 24c₁ - 15c₂

= -20c₁ - c₂

Next, we can express x as a linear combination of the basis vectors of C:

[x]c = [-20 | -1]

Therefore, [x]c is the column vector [-20, -1] representing the coordinates of x with respect to the basis C.

To know more about linear transformation, visit:

https://brainly.com/question/13595405

#SPJ11

The differential transformation, D, is defined as D(p(x)) = p'(x), while the shift transformation, T, is defined as T(p(x)) = x - p(x).

(a) The calculation of (D+T)(p(x)) is as follows:

[tex]D(p(x)) = p'(x) = 1 + 20x^3 - 2 + 0 = 20x^3 - 1\\

T(p(x)) = x - p(x) = x - (x + 5x^4 - 2x + 9) = -5x^4 + 1\\

Therefore,

(D+T)(p(x)) = 20x^3 - 1 + (-5x^4 + 1) = -5x^4 + 20x^3.[/tex]

(b) The calculation of (DT)(p(x)) is as follows:

[tex]T(p(x)) = x - p(x) = x - (x^2 + 5x^4 - 2x + 9) = -5x^4 - x^2 + 3x - 9\\

D(T(p(x))) = D(-5x^4 - x^2 + 3x - 9) = -20x^3 - 2x + 3\\

Therefore, (DT)(p(x)) = -20x^3 - 2x + 3.[/tex]

(c) The calculation of (TD)(p(x)) is as follows:

[tex]D(p(x)) = p'(x) = 1 + 20x^3 - 2 + 0 = 20x^3 - 1\\

T(D(p(x))) = T(20x^3 - 1) = x - (20x^3 - 1) = -20x^3 + x + 1\\

Therefore, (TD)(p(x)) = -20x^3 + x + 1.[/tex]

(d) The commutator [D, T] is given by (DT - TD)(p(x)):

[tex](DT)(p(x)) = -20x^3 - 2x + 3\\(TD)(p(x)) = -20x^3 + x + 1\\(DT - TD)(p(x)) = (-20x^3 - 2x + 3) - (-20x^3 + x + 1) = -20x^3 - 2x + 3 + 20x^3 - x - 1 = -3x - 2[/tex]

The commutator [D, T] is -3x - 2 for any integer power n, including n = 0.

To know more about refer here;
https://brainly.com/question/30745025

#SPJ11

The Fourier transforms of the sequences are (a) F(w) = 1/(1 - (1/3)[tex]e^{-jw}[/tex]) (b) F(w) = (1/9)(1/(1 - (1/3)[tex]e^{-jw}[/tex]) + 1/(1 - (1/3)[tex]e^{jw}[/tex])

To calculate the Fourier transforms of the given sequences, we can use the Fourier transform analysis equation

F(w) = Σ[∞, n=-∞] f[n][tex]e^{-jwn}[/tex]

where F(w) represents the Fourier transform of the sequence f[n], j is the imaginary unit, and w is the angular frequency.

(a) For the sequence f[n] = (1/3)ⁿ⁻² u[n - 1]:

Using the Fourier transform analysis equation, we have:

F(w) = Σ[∞, n=-∞] (1/3)ⁿ⁻² u[n - 1][tex]e^{-jwn}[/tex]

To simplify the calculation, we will split the sum into two parts:

F(w) = Σ[∞, n=0] (1/3)ⁿ⁻²[tex]e^{-jwn}[/tex]

Notice that u[n - 1] becomes 0 when n < 1. Therefore, we start the sum from n = 0 instead of n = -∞.

The sum is in the form of a geometric series, so we can evaluate it using the formula for the sum of a geometric series:

F(w) = 1/(1 - (1/3)[tex]e^{-jw}[/tex])

(b) For the sequence f[n] =[tex](1/3)^{|n-2|}[/tex]:

Using the Fourier transform analysis equation, we have

F(w) = Σ[∞, n=-∞][tex](1/3)^{|n-2|}[/tex] [tex]e^{-jwn}[/tex]

Since the sequence has absolute value notation, we need to split the sum into two parts based on the sign of (n - 2):

F(w) = Σ[∞, n=0] (1/3)ⁿ⁻² [tex]e^{-jwn}[/tex] + Σ[∞, n=3] (1/3)²⁻ⁿ [tex]e^{-jwn}[/tex]

Again, we start the sums from n = 0 and n = 3 to exclude the terms where the sequence becomes zero.

Simplifying the sums, we have

F(w) = (1/3)²/(1 - (1/3)[tex]e^{-jw}[/tex]) + (1/3)²/(1 - (1/3)[tex]e^{jw}[/tex])

F(w) = (1/9)(1/(1 - (1/3)[tex]e^{-jw}[/tex]) + 1/(1 - (1/3)[tex]e^{jw}[/tex]))

These are the Fourier transforms of the given sequences.

To know more about Fourier transforms:

https://brainly.com/question/1542972

#SPJ4

a. The intercept and slope coefficient from the least-squares regression line is interpreted as follows: i. Interpretation of the Intercept The intercept of the least-squares regression line represents the expected average IQ score of individuals whose height is zero.

Since height cannot be negative, this interpretation is not practically meaningful. ii. Interpretation of the Slope The slope coefficient from the least-squares regression line represents the average change in the IQ score for every one-unit increase in height. This on interpretation is practically meaningful. The predicted value of IQ for an individual whose height is 70 inches can be estimated using the regression equation. Thus, the predicted value of IQ for an individual whose height is 70 inches can be estimated as follows: y = β0 + β1 x = 51.235 + 0.272 x 70= 69.315Therefore, the predicted value of IQ for an individual whose height is 70 inches is approximately 69.315.c.

The strength of the relationship between height and IQ can be determined by the coefficient of determination (R2). R2 measures the proportion of the variation in IQ that is explained by changes in height. The coefficient of determination (R2) is calculated as follows:R2 = SSRegression/SSTotalSince R2 = 0.23, it indicates that about 23% of the variability in IQ is explained by changes in height. d. The 95% confidence interval for the slope of the population regression [tex]line[/tex]is estimated as follows: [tex]CI = β1 ± t0.025, n-2 SE(β1)Where β1 = 0.272, t0.025, n-2 = 2.021, and SE(β1) = 0.066. Thus, the 95% confidence interval is:CI = 0.272 ± 2.021(0.066)= 0.272 ± 0.133= (0.139, 0.405)[/tex]

To know more about height visit:

https://brainly.com/question/2505259

#SPJ11

y can be written as the sum of a vector in the span of u as:

y = ([tex]\frac{1}{3}[/tex])  [6 1] + [0 5]

To write vector y = [2 6] as the sum of a vector in the span of another vector, we need to find a scalar multiple of the given vector u = [6 1] that, when added to another vector in the span of u, equals y.

Let's find the scalar multiple first:

[tex]Scalar multiple = \frac{y(1st element)}{ u(1st element)} = \frac{2}{6} = \frac{1}{3}[/tex]

Now, we can express y as the sum of a vector in the span of u:[tex]y = \frac{1}{3} u+v[/tex]

To find vector v, we subtract the scalar multiple of u from [tex]y : v=y-\frac{1}{3}u[/tex]

Substituting the given values:

[tex]v = [2 6] - (\frac{1}{3} ) * [6 1][/tex]

= [2 6] - [2 1]

= [0 5]

Therefore, y can be written as the sum of a vector in the span of u as:

y = ([tex]\frac{1}{3}[/tex])  [6 1] + [0 5]

To know more about "Vector" refer here:

https://brainly.com/question/29261830#

#SPJ11

The probability that the entire batch will be rejected is P(entire batch rejected) = P(at least one defective radio) = 0.5693 (approx). Hence, the correct option is A) 0.530.

The probability that the entire batch of 8,000 clock radios will be rejected when a random sample of eight clock radios are tested for defects can be calculated as follows:

Given: A batch of 8,000 clock radios, 9% were defective.

A random sample of 8 clock radios is selected for testing without replacement. If at least one test is defective, the entire batch will be rejected. We want to find the probability that the entire batch will be rejected. Let us first find the probability of one clock radio not being defective:

P(one clock radio not defective) = 1 - P(one clock radio defective)

= 1 - 0.09 = 0.91

Probability of eight non-defective clock radios in the sample:

P(8 non-defective radios) = (0.91)⁸

= 0.4307 (approx)

The probability of at least one defective clock radio in the sample:

P(at least one defective radio) = 1 - P(8 non-defective radios)

= 1 - 0.4307

= 0.5693

The entire batch of clock radios will be rejected if the sample contains at least one defective clock radio.

Therefore, the probability of the entire batch being rejected is the same as the probability of at least one defective clock radio being found in the sample.

To learn more about probability, visit:

https://brainly.com/question/28045837

#SPJ11

the EIR from this transaction is 16.25% (Option B, None of the above).

To find the EIR from the transaction, we need to calculate the effective interest rate (EIR) on the loan. The formula for EIR is:

EIR = [(1 + r/n)ⁿ - 1] x 100

where r is the nominal interest rate, and n is the number of compounding periods per year.

In this case, the nominal interest rate is 10%, and the loan is payable on December 31, 2021, which is 5.5 years from June 30, 2016. Therefore, the number of compounding periods per year is 2 (since interest is payable semi-annually). Substituting these values into the formula, we get:

EIR = [(1 + 0.10/2)₂ - 1] x 100 = 10.25%

However, the bank requires a maintaining balance of 6% for any amount borrowed. Therefore, the effective interest rate is increased by this amount. Adding 6% to the EIR, we get:

EIR = 10.25% + 6% = 16.25%

Therefore, the EIR from this transaction is 16.25% (Option B, None of the above).

Learn more about Interest here

https://brainly.com/question/12325365

#SPJ4

To find the critical points of the function f(x) = (3 - x)e^x - 3, we need to find the values of x where the derivative of f(x) is equal to zero or undefined.

a) Critical point(s):

To find the critical point(s), we first need to find the derivative of f(x). Let's denote f'(x) as the derivative of f(x).

f'(x) = (3 - x)(e^x) - e^x - (3 - x)(e^x)

Simplifying f'(x), we get:

f'(x) = (3 - x - 1)(e^x) - (3 - x)(e^x)

= (2 - x)(e^x) - (3 - x)(e^x)

= (2 - x - 3 + x)(e^x)

= (-1)(e^x)

= -e^x

To find the critical points, we set f'(x) equal to zero:

-e^x = 0

This equation has no solution because e^x is always positive and cannot be equal to zero. Therefore, there are no critical points for the function f(x).

b) Interval(s) of increasing and decreasing:

Since there are no critical points, we need to analyze the behavior of the function in different intervals.

Let's consider two intervals: x < 0 and x > 0.

For x < 0:

In this interval, f'(x) = -e^x is negative. When the derivative is negative, the function is decreasing.

For x > 0:

In this interval, f'(x) = -e^x is also negative. Again, the function is decreasing.

Therefore, the function f(x) is decreasing for all values of x.

c) f(x) has a relative maximum:

Since the function is decreasing for all values of x, it does not have a relative maximum.

In summary:

a) There are no critical points.

b) The function is decreasing for all values of x.

c) The function does not have a relative maximum.

To know more about relative visit-

brainly.com/question/30979994

#SPJ11

Answer:

8%

percent increase

Step-by-step explanation:

Last month:

3500 unlimited

4700 limited

total: 8200

This month:

unlimited 3500 × 1.55 = 5425

limited 4700 × 0.75 = 3525

total: 8950

Part A:

8950/8200 = 1.0848484

% change = 8%

Part B:

The total number went up from 8200 to 8950, so it's an increase.

B. percent increase

(1 - 6cos(4x) + 3cos^2(4x) + cos(2x) - 4cos^2(x)cos(4x) + 2cos^2(x)cos^2(4x)) / 8 is the final expression obtained by rewriting cos^2(x) sin^4(2x) using the power reduction formulas.

To rewrite the expression cos^2(x) sin^4(2x) using power reduction formulas, we can apply the identities:

cos^2(x) = (1 + cos(2x)) / 2

sin^2(x) = (1 - cos(2x)) / 2

Using these identities, we can rewrite cos^2(x) sin^4(2x) step by step:

cos^2(x) sin^4(2x) = ((1 + cos(2x)) / 2) * ((1 - cos(4x)) / 2)^2

Expanding the expression further:

= ((1 + cos(2x)) / 2) * ((1 - cos(4x))^2 / 4)

To simplify the expression, we'll expand the square term in the numerator:

= ((1 + cos(2x)) / 2) * ((1 - 2cos(4x) + cos^2(4x)) / 4)

Now, we can simplify further by distributing and combining like terms:

= (1 + cos(2x))(1 - 2cos(4x) + cos^2(4x)) / 8

= (1 - 2cos(4x) + cos^2(4x) + cos(2x) - 2cos(2x)cos(4x) + cos(2x)cos^2(4x)) / 8

Finally, we can use the identity cos(2x) = 2cos^2(x) - 1 to simplify the expression even more:

= (1 - 2cos(4x) + cos^2(4x) + cos(2x) - 2cos(2x)cos(4x) + cos(2x)cos^2(4x)) / 8

= (1 - 2cos(4x) + cos^2(4x) + cos(2x) - 2(2cos^2(x) - 1)cos(4x) + (2cos^2(x) - 1)cos^2(4x)) / 8

= (1 - 4cos(4x) + 2cos^2(4x) + cos(2x) - 4cos^2(x)cos(4x) + 2cos^2(x)cos^2(4x) - 2cos(4x) + cos^2(4x)) / 8

= (1 - 6cos(4x) + 3cos^2(4x) + cos(2x) - 4cos^2(x)cos(4x) + 2cos^2(x)cos^2(4x)) / 8

This is the final expression obtained by rewriting cos^2(x) sin^4(2x) using the power reduction formulas.

Learn more about numerator at: brainly.com/question/7067665

#SPJ11

Answer:

NONE work!!!!!!!!!!

The probability that the coin will show heads or tails, the cube will show a three, and a blue shape will be chosen is 1/24.

Probability of the coin showing heads or tails: Since there are two equally likely outcomes (heads or tails) when flipping a fair coin

The probability of getting heads or tails is 1/2.

Probability of the cube showing a three: Since a standard number cube has six faces numbered from 1 to 6, and only one face has a three, the probability of rolling a three is 1/6.

Probability of choosing a blue shape: 3/6 or 1/2

The probability that the coin will show heads or tails, the cube will show a three, and a blue shape will be chosen is 1/2+1/6+1/2 which is 1/24

To learn more on probability click:

https://brainly.com/question/11234923

#SPJ1

According to this question is about measuring angles in different units are as follows:

a.

1. To determine the portion of a full rotation around the circle, we need to express the angle in terms of the total number of degrees in a full rotation, which is 360 degrees.

2. The portion of a full rotation is given by the ratio of the angle measure to 360 degrees:

Portion = (2 degrees) / (360 degrees) = 1/180

To convert the angle measure from degrees to radians, we use the conversion factor π radians = 180 degrees.

The angle in radians is given by:

Angle in radians = (2 degrees) * (π radians/180 degrees) = 2π/180 radians = π/90 radians

b. If an angle has a measure of DD degrees, the measure of the angle in radians can be found by multiplying the angle measure by the conversion factor π radians/180 degrees:

Angle in radians = (DD degrees) * (π radians/180 degrees) = (DDπ)/180 radians

c. The function g(D) that determines the radian measure of an angle in terms of the degree measure is given by:

g(D) = (Dπ)/180 radians

If an angle has a measure of 9π degrees, we can use the function g(D) to find the measure of the angle in radians:

Angle in radians = g(9π) = (9ππ)/180 radians = 9π²/180 radians = π²/20 radians.

To know more about radians visit-

brainly.com/question/31385694

#SPJ11

Using formula: Monthly payment = (loan amount * monthly interest rate) [tex]/ [1 - (1 + monthly interest rate) ^ (-number of months)][/tex]Monthly payment = [tex](50000 * 0.005) / [1 - (1 + 0.005)^-120][/tex] Monthly payment = $536.82 (to the nearest cent)

$50,000 and you are given 10 years to pay it back, you have to repay it in 10 x 12 = <<10*12=120>>120 months. Interest rate

= 6% compounded monthly Monthly interest rate

= 6/12%

= 0.5%

= 0.005 Loan amount

= $50,000 Therefore, the monthly payments if you get a 6% interest rate compounded monthly is $536.82 (to the nearest cent) Monthly payment = [tex](loan amount * monthly interest rate) / [1 - (1 + monthly interest rate) ^ (-number of months)]$590.50 = (50000 * 0.005) / [1 - (1 + 0.005) ^ (-N)]1 - (1 + 0.005) ^ (-N) = (50000 * 0.005) / $590.501 - (1 + 0.005) ^ (-N)[/tex]

[tex]= 4.2371 + (1 + 0.005) ^ (-N)[/tex]

= 0.236N

= [tex]ln (0.236) / ln(1 + 0.005)N[/tex]

= 219.18 months approx Therefore, it will take 219 months (approx) or 18.25 years (approx) to pay off the loan.

To know more about Monthly visit :-

https://brainly.com/question/20211659

#SPJ11