If a gas is 0.8L at 900 mm Hg and 400K, what is the new pressure if the volume decreases to 0.5L and 300K?

Answer:

The particle theory states that the particles of a substance spread out as they gain energy when heated. Thus, the particles take up more space, which means that the density of the substance decreases. It is almost always true that, for each pure sub­ stance (for example, gold), the density of its solid state is greater than the density

Explanation:

Answer:

105Comprendes las leyes de la electricidadAprende másClasificación de los materialesUn medio o material que permite el movimiento de las cargas eléctricas (electrones) en respuesta a una fuerza eléctrica, se denomina conductor. Los materiales conductores son los que se pueden electrizar en toda su superficie, debido a que los electrones se mueven libremente. Los metales por lo general son buenos conductores de la electricidad.El flujo de las partículas cargadas es lo que se conoce como corriente eléctrica. Las partículas cargadas en una cierta dirección de un conductor chocan con los átomos, produciendo una pérdida de energía que se manifiesta en forma de calor.Una medida de oposición que presentan las partículas cargadas al moverse libre-mente en una cierta dirección de un material conductor es lo que se conoce como resistencia eléctrica.Los materiales que no permiten que las partículas cargadas se muevan hacia otra región del material a una fuerza eléctrica, son llamados aislantespor ejemplo, la madera.Existen otros tipos de materiales cuyas propiedades son intermedias entre los conductores y aislantes; se llaman semiconductores.Algunos ejemplos de materiales con estas características son:

Explanation:

Answer:

Tbe reddish brown substance might be the rust that formed overtime in a iron tap and over the course of time mixed with other dust and particles it might have formed another substance .

The reddish brown substance is iron oxide which is formed by the reaction of iron materials with water and air. This oxide layer above the surface of metallic parts is called rust.

The Fe is a reddish metal more reactive towards the air and water as well. Fe is a very common in the manufacturing of many household materials. However, by the action of air and water these metallic parts undergo corrosion.

Corrosion is a chemical change involving the formation of oxide layer over the metallic surface which eventually corrode the substance and make it unusable.

Fe reacts with oxygen of water or air forming the reddish brown iron oxide Fe₂O₃ that is what called the rust. Rust can be seen in needles, vehicle parts made of iron etc.

Find more on corrosion:

https://brainly.com/question/28302789

#SPJ2

Answer:

1) C₃H₄N

Explanation:

The empirical formula of a compound is the formula that gives the positive integer ratio of the atoms of the elements in the compound in the simplest form

The mass of carbon in the compound = 90 grams

The molar mass of carbon = 12.011 g/mol

The number of moles of carbon = 90 g/(12.011 g/mol) ≈ 7.4931313 moles

The mass of hydrogen in the compound = 11 grams

The molar mass of hydrogen = 1.00794 g/mol

The number of moles of carbon = 11 g/(1.00794 g/mol) ≈ 10.913348 moles

The mass of nitrogen in the compound = 35 grams

The molar mass of nitrogen = 14.0067 g/mol

The number of moles of carbon = 35 g/(14.0067 g/mol) ≈ 2.49880414 moles

Dividing by the smallest mole ratio gives;

The proportion of carbon, C = 7.4931313/2.49880414 = 2.9987 ≈ 3

The proportion of nitrogen, N = 10.913348 /2.49880414 = 4.367 ≈ 4

The proportion of nitrogen, N = 2.49880414 /2.49880414 = 1

Therefore, the empirical formula of the compound is C₃H₄N.

Answer:

1) C₃H₄N

Explanation:

took test

Answer:

I do. I am in tenth. What area are you in?

Explanation:

Answer:

8th finna be in 9th wbu

Explanation:

Answer:

AlI3 is the chemical formula and the name of compound is Aluminium iodide.

Answer:

[tex]4.08x10^{25} molecules[/tex]

Explanation:

Hello there!

In this case, since the understanding of the mole-molecules relationships is analyzed via the Avogadro's number:

[tex]1mol=6.022x10^{23}molecules[/tex]

Next, we can solve the following setup by starting with the 67.8 moles of helium and obtaining the required molecules as follows:

[tex]67.8mol*\frac{6.022x10^{23}molecules}{1mol}\\\\=4.08x10^{25} molecules[/tex]

Best regards!

Answer:

2.25 moles H2

Explanation:

The equation N2+ 3H2 > 2NH3

1 mol of N2 gives 3 mol of H2

Then

. 75 mole N2 give 3*.75 = 2.25 moles of H2

Answer:

567 calories.

Explanation:

There 567 calories in 100 grams of peanut. In 100 grams of peanut, 49 gram is the fat, 26 grams of protein, 16 grams of carbohydrates, Sodium is 18 mg, Potassium is 705 mg. Calcium is present in peanut about 9%, Iron is 25% , Vitamin B-6 is 15%  and Magnesium is 42% of their total weight. Oil content is high in the Peanut so this is the reason for high calories in peanut. It is a good source of proteins and potassium.

Answer:

2 experimental

Explanation:

Answer:

83.33 m/s^2

Explanation:

Acceleration is defined as the rate of change of velocity.

So if we know that at the beginning an object has a velocity V1.

And after a time T, the object has a velocity V2, then the average acceleration in that time interval can be calculated as:

A = (V2 - V1)/T

In this case, we know that the initial speed was 5,000 m/s

And after a time of 60 s, the velocity is 10,000 m/s

Then we have:

V1 = 5,000 m/s

T = 60s

V2 = 10,000 m/s

Then the average acceleration is:

A = (10,000 m/s - 5,000 m/s)/60s = 83.33 m/s^2

Answer:

b. 485 kPa

Explanation:

Gay-Lussac's law express that the pressure of a gas under constant volume is directly proportional to the absolute temperature. The equation is:

P1T2 = P2T1

P is pressure and T absolute temperature of 1, initial state and 2, final state of the gas

Where P1 = 74psi

T2 = 20°C + 273.15 = 293.15K

P2 = ?

T1 = (95°F -32) * 5/9 + 273.15 = 308.15K

Replacing:

74psi*293.15K = P2*308.15K

70.4psi

In kPa:

70.4psi * (6.895kPa / 1psi) =

Answer:

9.00 g H2O

Explanation:

Convert molecules to grams using stoichiometry

(3.01 * 10^23 molecules) * (1 mole H2O / 6.022 * 10^23 molecules) * (18.01 g / 1 mole H2O) = 9.00 g H2O

Answer:

answer  in picture

Explanation:

Answer:

k

Explanation:

that is shide rong and shide right

Answer:

The molecular mass of carbon dioxide is 44.01amu

Answer:

It improves the texture of the flour

Explanation:

Flour is supposed to have a very fine texture. Commercial flour is not expected to occur in lumps. Lumps reduce the utility of the flour.

Hence, to improve the texture of the commercial flour, it is thoroughly sifted to ensure that there are no large lumps in the flour.This is so important when producing cake flour where the achievement of fine texture is of utmost priority.

Answer:

22.2 g of MgF₂

Explanation:

We star from the reaction:

NaF → sodium fluoride

Mg → Magnesium

2NaF  +  Mg →  MgF₂  +  2Na

2 moles of sodium fluoride react to 1 mol of Mg in order to produce 1 mol of magnesium fluoride and 2 moles of sodium.

We convert mass of the reactant to moles:

30 g . 1mol / 41.98 g = 0.715 mol

We assume that Mg is in excess

As ratio is 2:1, if we have 0.715 moles of NaF we may produce the half of moles, of MgF₂

0.715 mol /2 = 0.357 moles of MgF₂

We convert moles to mass: 0.357 mol . 62.30g /mol = 22.2 g

Answer:

Electron

Explanation:

Answer: Gasoline

Explanation: Siri said so

The non-aqueous means it does not contain water. Among the given options gasoline is an example of a non-aqueous solution. The correct option is A.

The solution which is obtained by dissolving solute in any liquid other than water is defined as the non-aqueous solution. If solute is dissolved in solvent like benzene, alcohol, ether, carbon disulphide, acetone etc. forms a non aqueous solution.

The major difference between the aqueous and non-aqueous solution is that the solvent of an aqueous solution is water whereas in non-aqueous solutions, the solvent is any substance other than water.

The solvent of non-aqueous solution can be polar or nonpolar and depending on the polarity the solutes dissolve in the solvent. Here gasoline is an example of the non-aqueous solution. The gasoline is a crude oil which does not include water as an ingredient.

Thus the correct option is A.

To know more about non-aqueous solution, visit;

https://brainly.com/question/4992250

#SPJ7

Answer:

bR2 since it is nonpolar

Answer: let me see I gotta do the work first then I’ll give you the answers

Explanation:

I think it's 80 . 12

pls tell me if correct

Answer: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.

Explanation:

edge

Answer:

Your answer is A.

Explanation: