Answer:
Mass = 0.005 kg
Explanation:
Given:
Velocity V = 10 m/s
kinetic energy 0.25 j
Find:
Mass of mosquito
Computation:
K.E = 1/2(m)(v²)
0.25 = 1/2(m)(10²)
0.5 = m x 100
Mass = 0.005 kg
Write a SELECT statement that returns these columns from the Orders table: The CardNumber column The length of the CardNumber column The last four digits of the CardNumber columnWhen you get that working right, add the column that follows to the result set. This is more difficult because the column requires the use of functions within functions. A column that displays the last four digits of the CardNumber column in this format: XXXX-XXXX-XXXX-1234. In other words, use Xs for the first 12 digits of the card number and actual numbers for the last four digits of the number.selectCardNumber,len(CardNumber) as CardNumberLegnth,right(CardNumber, 4) as LastFourDigits,'XXXX-XXXX-XXXX-' + right(CardNumber, 4) as FormattedNumberfrom Orders
Answer:
SELECT
CardNumber,
len(CardNumber) as CardNumberLength,
right(CardNumber, 4) as LastFourDigits,
'XXXX-XXXX-XXXX-' + right(CardNumber, 4) as FormattedNumber
from Orders
Explanation:
The question you posted contains the answer (See answer section). So, I will only help in providing an explanation
Given
Table name: Orders
Records to select: CardNumber, length of CardNumber, last 4 digits of CardNumber
From the question, we understand that the last four digits should display the first 12 digits as X while the last 4 digits are displayed.
So, the solution is as follows:
SELECT ----> This implies that the query is to perform a select operation
CardNumber, ---> This represents a column to read
len(CardNumber) as CardNumberLength, -----> len(CardNumber) means that the length of card number is to be calculated.
as CardNumberLength implies that an CardNumberLength is used as an alias to represent the calculated length
right(CardNumber, 4) as LastFourDigits, --> This reads the 4 rightmost digit of column CardNumber
'XXXX-XXXX-XXXX-' + right(CardNumber, 4) as FormattedNumber --> This concatenates the prefix XXXX-XXXX-XXXX to the 4 rightmost digit of column CardNumber
as FormattedNumber implies that an FormattedNumber is used as an alias to represent record
from Orders --> This represents the table where the record is being read.
How many GPRs (General purpose registers) are in ATMEGA?
Answer:
There are 32 general-purpose 8-bit registers, RO-R31 All arithmetic and logic operations operate on those registers; only load and store instructions access RAM. A limited number of instructions operate on 16-bit register pairs.
Write out code for a nested if statement that allows a user to enter in a product name, store the product into a variable called product_name and checks to see if that product exists in your nested if statement. You must include 5 product names to search for. If it is then assign the price of the item to a variable called amount and then print the product name and the cost of the product to the console. If it does not find any of the items in the nested if statement, then print that item cannot be found.
Answer:
product_name = input("Enter product name : ")
if product_name=="pen"or"book"or"box"or"pencil"or"eraser":
if product_name == "pen":
amount = 10
print(f"Product Name: {product_name}\nCost: {amount} rupees")
if product_name == "book":
amount = 100
print(f"Product Name: {product_name}\nCost: {amount} rupees")
if product_name == "box":
amount = 150
print(f"Product Name: {product_name}\nCost: {amount} rupees")
if product_name == "pencil":
amount = 5
print(f"Product Name: {product_name}\nCost: {amount} rupees")
if product_name == "eraser":
amount = 8
print(f"Product Name: {product_name}\nCost: {amount} rupees")
else:
print("Item not found!")
Explanation:
The python program is a code of nested if-statements that compares the input string to five items of the first if-statement. For every item found, its code block is executed.
Suppose that a computer has three types of floating point operations: add, multiply, and divide. By performing optimizations to the design, we can improve the floating point multiply performance by a factor of 10 (i.e., floating point multiply runs 10 times faster on this new machine). Similarly, we can improve the performance of floating point divide by a factor of 15 (i.e., floating point divide runs 15 times faster on this new machine). If an application consists of 50% floating point add instructions, 30% floating point multiply instructions, and 20% floating point divide instructions, what is the speedup achieved by the new machine for this application compared to the old machine
Answer:
1.84
Explanation:
Operation on old system
Add operation = 50% = 0.5
Multiply = 30% = 0.3
Divide = 20% = 0.2
T = total execution time
For add = 0.5T
For multiplication = 0.3T
For division = 0.2T
0.5T + 0.3T + 0.2T = T
For new computer
Add operation is unchanged = 0.5T
Multiply is 10 times faster = 0.3T/10 = 0.03T
Divide is 15 times faster = 0.2T/15= 0.0133T
Total time = 0.5T + 0.03T + 0.0133T
= 0.54333T
Speed up = Old time/ new time
= T/0.54333T
= 1/0.54333
= 1.84
What are recommended CPUs?
INTEL:
It does vary depending on your PC use, however, for office work, the i5 8th Gen is a recommended CPU as it can handle the requirements for office use without stress. For Gaming and high-end use, the i9 is a recommended CPU as it can handle games easily without stress.
AMD:
AMD Ryzen 3 3300X is good for office work and can handle office scenarios and the AMD Ryzen 7 3800x is good for gaming and high-end use.
Hope this helps,
Azumayay
what is a case in programming
Answer:
A case in programming is some type of selection, that control mechanics used to execute programs :3
Explanation:
:3
_____(Blank) Is the money that received regularly by an individual, for providing good or services, earnings from labor, business, or investments
Answer:
Income is money what an individual or business receives in exchange for providing labor, producing a good or service, or through investing capital. Individuals most often earn income through wages or salary.
Explanation:
Hope It Help you
How are BGP neighbor relationships formed
Automatically through BGP
Automatically through EIGRP
Automatically through OSPF
They are setup manually
Answer:
They are set up manually
Explanation:
BGP neighbor relationships formed "They are set up manually."
This is explained between when the BGP developed a close to a neighbor with other BGP routers, the BGP neighbor is then fully made manually with the help of TCP port 179 to connect and form the relationship between the BGP neighbor, this is then followed up through the interaction of any routing data between them.
For BGP neighbors relationship to become established it succeeds through various phases, which are:
1. Idle
2. Connect
3. Active
4. OpenSent
5. OpenConfirm
6. Established
This is computer and programming
Answer:yes
Explanation:because
Write a function named printPattern that takes three arguments: a character and two integers. The character is to be printed. The first integer specifies the number of times that the character is to be printed on a line (repetitions), and the second integer specifies the number of lines that are to be printed. Also, your function must return an integer indicating the number of lines multiplied by the number of repetitions. Write a program that makes use of this function. That is in the main function you must read the inputs from the user (the character, and the two integers) and then call your function to do the printing.
Answer:
import java.util.Scanner;
public class Main
{
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
char c;
int n1, n2;
System.out.print("Enter the character: ");
c = input.next().charAt(0);
System.out.print("Enter the number of times that the character is to be printed on a line: ");
n1 = input.nextInt();
System.out.print("Enter the number of lines that are to be printed: ");
n2 = input.nextInt();
printPattern(c, n1, n2);
}
public static int printPattern(char c, int n1, int n2){
for (int i=0; i<n2; i++){
for (int j=0; j<n1; j++){
System.out.print(c);
}
System.out.println();
}
return n1 * n2;
}
}
Explanation:
*The code is in Java.
Create a function named printPattern that takes one character c, and two integers n1, n2 as parameters
Inside the function:
Create a nested for loop. Since n2 represents the number of lines, the outer loop needs to iterate n2 times. Since n1 represents the number of times that the character is to be printed, the inner loop iterates n1 times. Inside the inner loop, print the c. Also, to have a new line after the character is printed n1 times on a line, we need to write a print statement after the inner loop.
Return the n1 * n2
Inside the main:
Declare the variables
Ask the user to enter the values for c, n1 and n2
Call the function with these values
Is there SUM in Small basic?
Answer:
no
Explanation:
________ can be written only once. The data cannot be erased or written over once it is saved.
Answer:
WORM (Write Once, Read Many)
Explanation:
The full meaning which means Write Once, Read Many implies that data can only be entered (or better put, written) once. Once the data has been written, the data can not be updated or deleted. However, the data being stored on WORM can be read as many times, as possible.
Hence, WORM answers the question.
what is the address of the first SFR (I/O Register)
Answer:
The Special Function Register (SFR) is the upper area of addressable memory, from address 0x80 to 0xFF.
Explanation:
The Special Function Register (SFR) is the upper area of addressable memory, from address 0x80 to 0xFF.
Reason -
A Special Function Register (or Special Purpose Register, or simply Special Register) is a register within a microprocessor, which controls or monitors various aspects of the microprocessor's function.
Suppose you design a banking application. The class CheckingAccount already exists and implements interface Account. Another class that implements the Account interface is CreditAccount. When the user calls creditAccount.withdraw(amount) it actually makes a loan from the bank. Now you have to write the class OverdraftCheckingAccount, that also implements Account and that provides overdraft protection, meaning that if overdraftCheckingAccount.withdraw(amount) brings the balance below 0, it will actually withdraw the difference from a CreditAccount linked to the OverdraftCheckingAccount object. What design pattern is appropriate in this case for implementing the OverdraftCheckingAccount class
Answer:
Strategy
Explanation:
The strategic design pattern is defined as the behavioral design pattern that enables the selecting of a algorithm for the runtime. Here the code receives a run-time instructions regarding the family of the algorithms to be used.
In the context, the strategic pattern is used for the application for implementing OverdraftCheckingAccount class. And the main aspect of this strategic pattern is the reusability of the code. It is behavioral pattern.
Computer programming
describe the major elements and issues with agile development
Answer:
water
Explanation:
progresses through overtime
Scenario
Your task is to prepare a simple code able to evaluate the end time of a period of time, given as a number of minutes (it could be arbitrarily large). The start time is given as a pair of hours (0..23) and minutes (0..59). The result has to be printed to the console.
For example, if an event starts at 12:17 and lasts 59 minutes, it will end at 13:16.
Don't worry about any imperfections in your code - it's okay if it accepts an invalid time - the most important thing is that the code produce valid results for valid input data.
Test your code carefully. Hint: using the % operator may be the key to success.
Test Data
Sample input:
12
17
59
Expected output: 13:16
Sample input:
23
58
642
Expected output: 10:40
Sample input:
0
1
2939
Expected output: 1:0
Answer:
In Python:
hh = int(input("Start Hour: "))
mm = int(input("Start Minute: "))
add_min = int(input("Additional Minute: "))
endhh = hh + (add_min // 60)
endmm = mm + (add_min % 60)
endhh += endmm // 60
endmm = endmm % 60
endhh = endhh % 24
print('{}:{}'.format(endhh, endmm))
Explanation:
This prompts the user for start hour
hh = int(input("Start Hour: "))
This prompts the user for start minute
mm = int(input("Start Minute: "))
This prompts the user for additional minute
add_min = int(input("Additional Minute: "))
The following sequence of instruction calculates the end time and end minute
endhh = hh + (add_min // 60)
endmm = mm + (add_min % 60)
endhh += endmm // 60
endmm = endmm % 60
endhh = endhh % 24
This prints the expected output
print('{}:{}'.format(endhh, endmm))
37) Which of the following statements is true
A) None of the above
B) Compilers translate high-level language programs into machine
programs Compilers translate high-level language programs inton
programs
C) Interpreter programs typically use machine language as input
D) Interpreted programs run faster than compiled programs
Answer:
B
Explanation:
its b
Answer:
A C E
Explanation:
I got the question right.
Under which command group will you find the options to configure Outlook rules?
O Move
O New
O Quick Steps
O Respond
Answer:
Move
Explanation:
I hope that helps :)
Answer:
a). move
Explanation:
edge 2021 <3
Define and use in your program the following functions to make your code more modular: convert_str_to_numeric_list - takes an input string, splits it into tokens, and returns the tokens stored in a list only if all tokens were numeric; otherwise, returns an empty list. get_avg - if the input list is not empty and stores only numerical values, returns the average value of the elements; otherwise, returns None. get_min - if the input list is not empty and stores only numerical values, returns the minimum value in the list; otherwise, returns None. get_max - if the input list is not empty and stores only numerical values, returns the maximum value in the list; otherwise, returns None.
Answer:
In Python:
def convert_str_to_numeric_list(teststr):
nums = []
res = teststr.split()
for x in res:
if x.isdecimal():
nums.append(int(x))
else:
nums = []
break;
return nums
def get_avg(mylist):
if not len(mylist) == 0:
total = 0
for i in mylist:
total+=i
ave = total/len(mylist)
else:
ave = "None"
return ave
def get_min(mylist):
if not len(mylist) == 0:
minm = min(mylist)
else:
minm = "None"
return minm
def get_max(mylist):
if not len(mylist) == 0:
maxm = max(mylist)
else:
maxm = "None"
return maxm
mystr = input("Enter a string: ")
mylist = convert_str_to_numeric_list(mystr)
print("List: "+str(mylist))
print("Average: "+str(get_avg(mylist)))
print("Minimum: "+str(get_min(mylist)))
print("Maximum: "+str(get_max(mylist)))
Explanation:
See attachment for complete program where I use comment for line by line explanation
Consider the following:
calc = 3 * 5 + 4 ** 2 - 1
What is the base for the exponent?
8
4
5
3
Answer:
3 * 5 + 4 ** 2 - 1 = 5
Explanation:
3 * 5 = 15 + 4 ** 2 = 76 - 1 = 75
The exponent of a number shows how many times a base integer should be multiplied. It is represented as a tiny number in the top right corner of a base number, and the further calculation can be defined as follows:
Given:
[tex]\bold{calc = 3 * 5 + 4 ** 2 - 1}[/tex]
Calculation:
[tex]\bold{calc = 3 \times 5 + 4^2 - 1}\\\\\bold{calc = 15 + 16 - 1}\\\\\bold{calc = 15 + 15 }\\\\\bold{calc = 30 }\\\\[/tex]
The given code is a part of the python program, in which we use the power expression. It implies that one "*" symbol is used to multiply the value and "**" and two symbols are used for calculating the power value.Therefore, the answer is "4".
Learn more:
brainly.com/question/9857728
discuss advantages and disadvantages of os
Answer:
Advantages :
Management of hardware and software
easy to use with GUI
Convenient and easy to use different applications on the system.
Disadvantages:
They are expensive to buy
There can be technical issues which can ruin the task
Data can be lost if not saved properly
Explanation:
Operating system is a software which manages the computer. It efficiently manages the timelines and data stored on it is considered as safe by placing passwords. There are various advantages and disadvantages of the system. It is dependent on the user how he uses the software.
steps on how to install a mouse
Answer:
Verify that the mouse you're thinking of purchasing is compatible with your laptop model. ...
Plug the mouse's USB cable into the matching port on the side of your laptop.
Restart your computer while the mouse is connected. ...
Move your mouse a few times to confirm that the cursor responds.
Which of the following is step two of the Five-Step Worksheet Creation Process?
Answer:
Add Labels.
As far as i remember.
Explanation:
Hope i helped, brainliest would be appreciated.
Have a great day!
~Aadi x
Add Labels is step two of the Five-Step Worksheet Creation Process. It helps in inserting the data and values in the worksheet.
What is label worksheet in Excel?A label in a spreadsheet application like Microsoft Excel is text that offers information in the rows or columns around it. 3. Any writing placed above a part of a chart that provides extra details about the value of the chart is referred to as a label.
Thus, it is Add Labels
For more details about label worksheet in Excel, click here:
https://brainly.com/question/14719484
#SPJ2
write essay about pokhara
Explanation:
Pokhara is the second most visited city in Nepal, as well as one of the most popular tourist destinations. It is famous for its tranquil atmosphere and the beautiful surrounding countryside. Pokhara lies on the shores of the Phewa Lake. From Pokhara you can see three out of the ten highest mountains in the world (Dhaulagiri, Annapurna, Manasalu). The Machhapuchre (“Fishtail”) has become the icon of the city, thanks to its pointed peak.
As the base for trekkers who make the popular Annapurna Circuit, Pokhara offers many sightseeing opportunities. Lakeside is the area of the town located on the shores of Phewa Lake, and it is full of shops and restaurants. On the south-end of town, visitors can catch a boat to the historic Barahi temple, which is located on an island in the Phewa Lake.
On a hill overlooking the southern end of Phewa Lake, you will find the World Peace Stupa. From here, you can see a spectacular view of the lake, of Pokhara and Annapurna Himalayas. Sarangkot is a hill on the southern side of the lake which offers a wonderful dawn panorama, with green valleys framed by the snow-capped Annapurnas. The Seti Gandaki River has created spectacular gorges in and around the city. At places it is only a few meters wide and runs so far below that it is not visible from the top
Pokhara is a beautiful city located in the western region of Nepal. It is the second largest city in Nepal and one of the most popular tourist destinations in the country. The city is situated at an altitude of 827 meters above sea level and is surrounded by stunning mountain ranges and beautiful lakes. Pokhara is known for its natural beauty, adventure activities, and cultural significance.
One of the most famous attractions in Pokhara is the Phewa Lake, which is the second largest lake in Nepal. It is a popular spot for boating, fishing, and swimming. The lake is surrounded by lush green hills and the Annapurna mountain range, which provides a stunning backdrop to the lake.
Another popular attraction in Pokhara is the World Peace Pagoda, which is a Buddhist stupa located on top of a hill. The stupa is a symbol of peace and was built by Japanese Buddhist monks. It provides a panoramic view of the city and the surrounding mountains.
The city is also known for its adventure activities, such as paragliding, zip-lining, and bungee jumping. These activities provide a unique and thrilling experience for tourists who are looking for an adrenaline rush.
In addition to its natural beauty and adventure activities, Pokhara is also significant for its cultural heritage. The city is home to many temples, such as the Bindhyabasini Temple, which is a Hindu temple dedicated to the goddess Bhagwati. The temple is located on a hill and provides a panoramic view of the city.
Overall, Pokhara is a city that has something to offer for everyone. It is a perfect destination for those who are looking for natural beauty, adventure activities, and cultural significance. The city is easily accessible by road and air, and is a must-visit destination for anyone who is planning to visit Nepal.
Input 3 positive integers from the terminal, determine if tlrey are valid sides of a triangle. If the sides do form a valid triangle, output the type of triangle - equilateral, isosceles, or scalene - and the area of the triangle. If the three integers are not the valid sides of a triangle, output an appropriats message and the 3 sides. Be sure to comment and error check in your progam.
Answer:
In Python:
side1 = float(input("Side 1: "))
side2 = float(input("Side 2: "))
side3 = float(input("Side 3: "))
if side1>0 and side2>0 and side3>0:
if side1+side2>=side3 and side2+side3>=side1 and side3+side1>=side2:
if side1 == side2 == side3:
print("Equilateral Triangle")
elif side1 == side2 or side1 == side3 or side2 == side3:
print("Isosceles Triangle")
else:
print("Scalene Triangle")
else:
print("Invalid Triangle")
else:
print("Invalid Triangle")
Explanation:
The next three lines get the input of the sides of the triangle
side1 = float(input("Side 1: "))
side2 = float(input("Side 2: "))
side3 = float(input("Side 3: "))
If all sides are positive
if side1>0 and side2>0 and side3>0:
Check if the sides are valid using the following condition
if side1+side2>=side3 and side2+side3>=side1 and side3+side1>=side2:
Check if the triangle is equilateral
if side1 == side2 == side3:
print("Equilateral Triangle")
Check if the triangle is isosceles
elif side1 == side2 or side1 == side3 or side2 == side3:
print("Isosceles Triangle")
Otherwise, it is scalene
else:
print("Scalene Triangle")
Print invalid, if the sides do not make a valid triangle
else:
print("Invalid Triangle")
Print invalid, if the any of the sides are negative
else:
print("Invalid Triangle")
7. Question
HTTP status codes are codes or numbers that indicate some sort of error or info message that
occurred when trying to access a web resource. When a website is having issues on the server side,
what number does the HTTP status code start with?
17
5xx
2xx
O O O O
6xx
4xx
Research: Using the Internet or a library, gather information about the Columbian Exchange. Takes notes about the specific goods and diseases that traveled back and forth across the Atlantic, as well the cultural and political changes that resulted. Pay special attention to the indigenous perspective, which will most likely be underrepresented in your research.
Answer:
Small pox, cacao, tobacco, tomatoes, potatoes, corn, peanuts, and pumpkins.
Explanation:
In the Columbian Exchange, transportation of plants, animals, diseases, technologies, and people from one continent to another held. Crops like cacao, tobacco, tomatoes, potatoes, corn, peanuts, and pumpkins were transported from the Americas to rest of the world. Due to this exchange, Native Americans were also infected with smallpox disease that killed about 90% of Native Americans because this is a new disease for them and they have no immunity against this disease. Due to this disease, the population of native Americans decreases and the population of English people increases due to more settlement.
Part 1 of 4 parts for this set of problems: Given an 4777 byte IP datagram (including IP header and IP data, no options) which is carrying a single TCP segment (which contains no options) and network with a Maximum Transfer Unit of 1333 bytes. How many IP datagrams result, how big are each of them, how much application data is in each one of them, what is the offset value in each. For the first of four datagrams: Segment
Answer:
Fragment 1: size (1332), offset value (0), flag (1)
Fragment 2: size (1332), offset value (164), flag (1)
Fragment 3: size (1332), offset value (328), flag (1)
Fragment 4: size (781), offset value (492), flag (1)
Explanation:
The maximum = 1333 B
the datagram contains a header of 20 bytes and a payload of 8 bits( that is 1 byte)
The data allowed = 1333 - 20 - 1 = 1312 B
The segment also has a header of 20 bytes
the data size = 4777 -20 = 4757 B
Therefore, the total datagram = 4757 / 1312 = 4
By using your own data, search engines and other sites try to make your web experience more personalized. However, by doing this, certain information is being hidden from you. Which of the following terms is used to describe the virtual environment a person ends up in when sites choose to show them only certain, customized information?
A filter bubble
A clustered circle
A relational table
An indexed environment
Answer:
A filter bubble
Explanation: