If a negative point charge is placed at P without moving the original charges, the net electrical force the charges ±Q will exert on it is

Answer:

Muons reach the earth in great amount due to the relativistic time dilation from an earthly frame of reference.

Explanation:

Muons travel at exceedingly high speed; close to the speed of light. At this speed, relativistic effect starts to take effect. The effect of this is that, when viewed from an earthly reference frame, their short half life of about two-millionth of a second is dilated. The dilated time, due to relativistic effects on time for travelling at speed close to the speed of light, gives the muons an extended relative travel time before their complete decay. So in reality, the muon do not have enough half-life to survive the distance from their point of production high up in the atmosphere to sea level, but relativistic effect due to their near-light speed, dilates their half-life; enough for them to be found in sufficient amount at sea level.  

Answer:

x=22.57 m

Explanation:

Given that

35 m in W of S

angle = 40 degrees

25 m in east

From the diagram

The angle

[tex]\theta=90-40=50^o[/tex]

From the triangle OAB

[tex]cos40^o=\frac{35^2+25^2-x^2}{2\times 35\times 25}[/tex]

[tex]1340.57=35^2+25^2-x^2[/tex]

x=22.57 m

Therefore the answer of the above problem will be 22.57 m

Answer and Explanation:

There is no probability of obtaining such a circuit of closed track current carrying wire whose field of magnitude displays i.e.  [tex]B \alpha \frac{1}{r^2}[/tex]

The magnetic field is a volume of vectors

And [tex]\phi\ bds = 0[/tex]. This ensures isolated magnetic poles or magnetic charges would not exit

Therefore for a closed path,  we never received magnetic field that followed the [tex]B \alpha \frac{1}{r^2}[/tex] it is only for the simple current-carrying wire for both finite or infinite length.

Complete question:

A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct?

A. the interior field points in a direction parallel to the exterior field

B. There is no electric field on the interior of the conducting sphere.

C. The interior field points in a direction perpendicular to the exterior field.

D. the interior field points in a direction opposite to the exterior field.

Answer:

B. There is no electric field on the interior of the conducting sphere.

Explanation:

Conductors are said to have free charges that move around easily. When the conductor is now placed in a static electric field, the free charges react to attain electrostatic equilibrium (steady state).

Here, a solid conducting sphere is placed in an external uniform electric field. Until the lines of the electric field are perpendicular to the surface, the free charges will move around the spherical conductor, causing polarization. There would be no electric field in the interior of the spherical conductor because there would be movement of  free charges in the spherical conductor in response to any field until its neutralization.

Option B is correct.

There is no electric field on the interior of the conducting sphere.

Answer:

 θ₁ = 0.04º , θ₂ = 0.00118º

Explanation:

The equation that describes the diffraction pattern of a network is

             d sin θ = m λ

where the diffraction order is, in this case they indicate that the order

m = 1

           θ = sin⁻¹ (λ / d)

Trfuvsmod ls inrsd fr ll red s SI units

           d = 12000 line / inc (1 inc / 2.54cm) = 4724 line / cm

the distance between two lines we can look for it with a direct proportions rule

If there are 4724 lines in a centimeter, the distance for two hundred is

            d = 2 lines (1 cm / 4724 line) = 4.2337 10⁻⁴ cm

let's calculate the angles

λ = 300 10-9 m

            θ₁ = sin⁻¹ (300 10-9 / 4,2337 10-4)

            θ₁ = sin⁻¹ (7.08 10-4)

            θ₁ = 0.04º

λ = 5000

          θ₂ = sin-1 (500 10-9 / 4,2337 10-4)

          θ₂ = 0.00118º

Answer:

The angular momentum of the crate is [tex]M_{C} V_{1} d[/tex]

Explanation:

mass of the crate = [tex]M_{C}[/tex]

speed of forklift = [tex]V_{1}[/tex]

The distance between the center of the mass and the point A = d

Recall that the angular moment is the moment of the momentum.

[tex]L = P*d[/tex]    ..... equ 1

where L is the angular momentum,

P is the momentum of the system,

d is the perpendicular distance between the crate and the point on the axis about which the momentum acts. It is equal to d from the image

Also, we know that the momentum P is the product of mass and velocity

P = mv      ....equ 2

in this case, the mass = [tex]M_{C}[/tex]

the velocity = [tex]V_{1}[/tex]

therefore, the momentum P = [tex]M_{C}[/tex][tex]V_{1}[/tex]

we substitute equation 2 into equation 1 to give

[tex]L = M_{C} V_{1} d[/tex]

Answer:

The potential at the center of the sphere is -924 V

Explanation:

Given;

radius of the sphere, R = 0.22 m

electric field at the surface of the sphere, E = 4200 N/C

Since the electric field is directed towards the center of the sphere, the charge is negative.

The Potential is the same at every point in the sphere, and it is given as;

[tex]V = \frac{1}{4 \pi \epsilon_o} \frac{q}{R}[/tex] -------equation (1)

The electric field on the sphere is also given as;

[tex]E = \frac{1}{4 \pi \epsilon _o} \frac{|q|}{R^2}[/tex]

[tex]|q |= 4 \pi \epsilon _o} R^2E[/tex]

Substitute in the value of q in equation (1)

[tex]V = \frac{1}{4 \pi \epsilon_o} \frac{-(4 \pi \epsilon _o R^2E)}{R} \ \ \ \ q \ is \ negative\ because \ E \ is\ directed \ toward \ the \ center\\\\V = -RE\\\\V = -(0.22* 4200)\\\\V = -924 \ V[/tex]

Therefore, the potential at the center of the sphere is -924 V

Answer:

STATIC,  STATIC

KINETIC friction is less than static friction

Explanation:

In this exercise you are asked to complete the sentences with the correct words.

STATIC friction prevents the relative movement of two surfaces in contact.

For moving surfaces the friction is STATIC is greater than the kinetic friction.

For the last two sentences I think they are misspelled, the correct thing is

KINETIC friction is less than static friction

Answer:

[tex]v_{2}=3.5 m/s[/tex]

Explanation:

Using the conservation of energy we have:

[tex]\frac{1}{2}mv^{2}=mgh[/tex]

Let's solve it for v:

[tex]v=\sqrt{2gh}[/tex]

So the speed at the lowest point is [tex]v=7 m/s[/tex]

Now, using the conservation of momentum we have:

[tex]m_{1}v_{1}=m_{2}v_{2}[/tex]

[tex]v_{2}=\frac{1*7}{2}[/tex]

Therefore the speed of the block after the collision is [tex]v_{2}=3.5 m/s[/tex]

I hope it helps you!

Answer:

Explanation:

In a conductor, electric current can flow freely, in an insulator it cannot.

Metals such as copper typify conductors, while most non-metallic solids are said to be good insulators, having extremely high resistance to the flow of charge through them.

Most atoms hold on to their electrons tightly and are insulators.

Answer:

Q = 23.49 C

Explanation:

We have,

Electric current drawn by the air conditioner is 16.2 A

Time, t = 1.45 s

It is required to find the electric charge passes through the circuit during this period. We know that electric current is defined as the electric charge flowing per unit time. So,

[tex]I=\dfrac{q}{t}\\\\q=It\\\\q=16.2\times 1.45\\\\q=23.49\ C[/tex]

So, the charge of 23.49 C is passing through the circuit during this period.

Answer:

same direction = 80 (n)

opposite direction = 20 (n) going one direction

Explanation:

same direction means they are added to each other

and opposite means acting on eachother

Answer:

a) yes

b) no

c) yes

d)Cart 2 with mass [tex]\frac{M}{3}[/tex]   is expected to be more faster

e) u₂ = 48 m/s

Explanation:

a) the all out linear momentum of an arrangement of particles of Cart 1 not followed up on by external forces is constant.

b) the linear momentum of Cart 2 will be acted upon by external force by Cart 1 with mass M, thereby it's variable and the momentum is not conserved

c) yes, the momentum is conserved because no external force acted upon it and both Carts share the same velocity after the reaction

note: m₁u₁ + m₂u₂ = (m₁ + m₂)v

d) Cart 2 with mass [tex]\frac{M}{3}[/tex] will be faster than Cart 1 because Cart 2 is three times lighter than Cart 1.

e) Given

m₁=  M

u₁ = 16m/s

m₂ =[tex]\frac{M}{3}[/tex]

u₂ = ?

from law of conservation of momentum

m₁u₁= m₂u₂

M× 16 = [tex]\frac{M}{3}[/tex] × u₂(multiply both sides by 3)

therefore, u₂ = [tex]\frac{3(M .16)}{M}[/tex] ("." means multiplication)

∴u₂ = 3×16 = 48 m/s

Answer:

Acceleration of the asteroid relative to the spacecraft = 2ε[tex]E^{2}[/tex]A/m

Explanation:

The maximum electric field in the beam = 2E

cross-sectional area of beam = A

The intensity of an electromagnetic wave with electric field is

I = cε[tex]E_{0} ^{2}[/tex]/2

for [tex]E_{0}[/tex] = 2E

I = 2cε[tex]E^{2}[/tex]    ....equ 1

where

I is the intensity

c is the speed of light

ε is the permeability of free space

[tex]E_{0}[/tex]  is electric field

Radiation pressure of an electromagnetic wave on an absorbing surface is given as

P = I/c

substituting for I from above equ 1. we have

P = 2cε[tex]E^{2}[/tex]/c = 2ε[tex]E^{2}[/tex]    ....equ 2

Also, pressure P = F/A

therefore,

F = PA    ....equ 3

where

F is the force

P is pressure

A is cross-sectional area

substitute equ 2 into equ 3, we have

F = 2ε[tex]E^{2}[/tex]A

force on a body = mass x acceleration.

that is

F = ma

therefore,

a = F/m

acceleration of the asteroid will then be

a = 2ε[tex]E^{2}[/tex]A/m

where m is the mass of the asteroid.

Answer:

[tex]\large \boxed{\text{3.3 cm}^{3}}[/tex]

Explanation:

Assume the stone consists of basalt, which has a density of 3.0 g/cm³.

[tex]\rho = \text{10 g}\times\dfrac{\text{1 cm}^{3}}{\text{3.0 g}} = \text{3.3 cm}^{3}\\\\\text{The volume of the stone is $\large \boxed{\textbf{3.3 cm}^{3}}$}[/tex]

Answer:

E = - dV/dx

Explanation:

Las superficies equipòtenciales son superficie donde el potencial eléctrico es constante por lo cual nos podemos desplazaren ella sin realizar nigun trabajo.

El campo electrico es el campo que existen algún punto en el espacio creado por alguna ddistribucion de carga.

De los antes expuesto las dos magnitudes están relacionadas

         E = - dV/dx

por lo cual el potenical es el gradiente del potencial eléctrico.

Como el campo eléctrico sobre un superficie equipotenciales constante, podemos colocar una punta de prueba con un potencial dado y seguir la linea que de una diferencia de potencial constar, lo cual permite visualizar las forma de cada linea equipotencial

Answer:

v(t) = s′(t) = −9sin(t)+9cos(t)

a(t) = v′(t) = −9cos(t) −9sin(t)

Explanation:

Given that

s = 9 cos(t) + 9 sin(t), t ≥ 0

Then acceleration and velocity is

v(t) = s′(t) = −9sin(t)+9cos(t)

a(t) = v′(t) = −9cos(t) −9sin(t)

Answer:

Explanation:

given:

radius (r) = 1.88 km

velocity (v) = 136.3 km/hr

required:

banking angle ∡ ?

first:

convert 1.88 km to m = 1.88km * 1000m / 1km

r = 1880 m

convert velocity v = 136.3 km/hr to m/s = 136.3 km/hr * (1000 m/ 3600s)

v = 37.86 m/s

now.. calculate the angle

Ф = inv tan (v² / r * g)            we know that gravity = 9.8 m/s²

Ф = inv tan (37.86² / (1880 * 9.8))

Ф = 4.4°

Answer:

The speed of the rod is 1.383 m/s

Explanation:

Given;

length of the conducting rod, L = 31 cm = 0.31 m

induced emf on the rod, emf = 0.75V

magnetic field around the rod, B = 1.75 T

Apply the following Faraday's equation for electromagnetic induction in a moving rod to determine the speed of the rod.

emef = BLv

where;

B is the magnetic field

L is length of the rod

v is the speed of the rod

v = emf / BL

v = (0.75) / (1.75 x 0.31)

v = 1.383 m/s

Therefore, the speed of the rod is 1.383 m/s

Answer:

The rate at which energy is dissipated in the resistor is equal to the rate at which energy is stored in the inductor's magnetic field in 24.95 ms.

Explanation:

The energy stored in the inductor is given as

E₁ = ½LI²

The rate at which energy is stored in the inductor is

(dE₁/dt) = (d/dt) (½LI²)

Since L is a constant

(dE₁/dt) = ½L × 2I (dI/dt) = LI (dI/dt)

(dE₁/dt) = LI (dI/dt)

Rate of Energy dissipated in a resistor = Power = I²R

(dE₂/dt) = I²R

When the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field

(dE₁/dt) = (dE₂/dt)

OK (dI/dt) = I²R

L (dI/dt) = IR

Current in a this kind of series setup of inductor and resistor at any time, t, is given as

I = (V/R) (1 - e⁻ᵏᵗ)

k = (1/time constant) = (R/L)

(dI/dt) = (kV/R) e⁻ᵏᵗ = (RV/RL) e⁻ᵏᵗ = (V/L) e⁻ᵏᵗ

L (dI/dt) = IR

L [(V/L) e⁻ᵏᵗ] = R [(V/R) (1 - e⁻ᵏᵗ)

V e⁻ᵏᵗ = V (1 - e⁻ᵏᵗ)

e⁻ᵏᵗ = 1 - e⁻ᵏᵗ

2 e⁻ᵏᵗ = 1

e⁻ᵏᵗ = (1/2) = 0.5

e⁻ᵏᵗ = 0.5

In e⁻ᵏᵗ = In 0.5 = -0.69315

- kt = -0.69315

kt = 0.69315

k = (1/time constant)

Time constant = 36.0 ms = 0.036 s

k = (1/0.036) = 27.78

27.78t = 0.69315

t = (0.69315/27.78) = 0.02495 = 24.95 ms

Hope this Helps!!!

Answer:

It is calculated as Force × perpendicular distance.

Explanation:

Torque is a rotational force and twisting force that can cause an object to rotate in it's axis. This cause angular rotation.

The torque due to gravity on a body about its centre of mass is zero because the centre of mass is the that point of the body at which the force acts by the gravity that is mg.

But if the pivot point of a balance is not at the centre of mass of the balance, it will be FORCE × PERPENDICULAR DISTANCE because at that point, there is no centre in which the force act on a body by gravity. The distance and force will be use to calculate.

Answer:

-1748*10^N/C

Explanation:

See attached file

Complete Question:

A 0.50-kg ball that is tied to the end of a 1.5-m light cord is revolved in a horizontal plane, with the cord making a 30° angle with the vertical.

(a) Determine the ball’s speed. (b) If, instead, the ball is revolved so that its

speed is 3.7 m/s, what angle does the cord make with the vertical?

(Check attached image for the diagram.)

Answer:

(a) The ball’s speed, v = 2.06 m/s

(b) The angle the cord makes with the vertical is 50.40⁰

Explanation:

If the ball is revolved in a horizontal plane, it will form a circular trajectory,

the radius of the circle, R = Lsinθ

where;

L is length of the string

The force acting on the ball is given as;

F = mgtanθ

This above is also equal to centripetal force;

[tex]mgTan \theta = \frac{mv^2}{R} \\\\Recall, R = Lsin \theta\\\\mgTan \theta = \frac{mv^2}{Lsin \theta}\\\\v^2 = glTan \theta sin \theta\\\\v = \sqrt{glTan \theta sin \theta} \\\\v = \sqrt{(9.8)(1.5)(Tan30)(sin30)} \\\\v = 2.06 \ m/s[/tex]

(b) when the speed is 3.7 m/s

[tex]v = \sqrt{glTan \theta sin \theta} \ \ \ ;square \ both \ sides\\\\v^2 = glTan \theta sin \theta\\\\v^2 = gl(\frac{sin \theta}{cos \theta}) sin \theta\\\\v^2 = \frac{gl*sin^2 \theta}{cos \theta} \\\\v^2 = \frac{gl*(1- cos^2 \theta)}{cos \theta}\\\\gl*(1- cos^2 \theta) = v^2cos \theta\\\\(9.8*1.5)(1- cos^2 \theta) = (3.7^2)cos \theta\\\\14.7 - 14.7cos^2 \theta = 13.69cos \theta\\\\14.7cos^2 \theta + 13.69cos \theta - 14.7 = 0 \ \ \ ; this \ is \ quadratic \ equation\\\\[/tex]

[tex]Cos\theta = \frac{13.69\sqrt{13.69^2 -(-4*14.7*14.7)} }{14.7} \\\\Cos \theta = 0.6374\\\\\theta = Cos^{-1}(0.6374)\\\\\theta = 50.40 ^o[/tex]

Therefore, the angle the cord makes with the vertical is 50.40⁰

Answer:

[tex]\frac{50}{\pi }[/tex]Hz

Explanation:

In alternating current (AC) circuits, voltage (V) oscillates in a sine wave pattern and has a general equation as a function of time (t) as follows;

V(t) = V sin (ωt + Ф)            -----------------(i)

Where;

V = amplitude value of the voltage

ω = angular frequency = 2 π f        [f = cyclic frequency or simply, frequency]

Ф = phase difference between voltage and current.

Now,

From the question,

V(t) = 230 sin (100t)              ---------------(ii)

By comparing equations (i) and (ii) the following holds;

V = 230

ω = 100

Ф = 0

But;

ω = 2 π f = 100

2 π f = 100             [divide both sides by 2]

π f = 50

f = [tex]\frac{50}{\pi }[/tex]Hz

Therefore, the frequency of the voltage is [tex]\frac{50}{\pi }[/tex]Hz

Answer:

5

Explanation:

Answer:

for the first interference m = 1   y = 2,839 10-3 m

for the second interference m = 2   y = 5,678 10-3 m

Explanation:

The double slit interference phenomenon, for constructive interference is described by the expression

                d sin θ = m λ

where d is the separation between the slits, λ the wavelength and m an integer that corresponds to the interference we see.

In these experiments in general the observation screen is L >> d, let's use trigonometry to find the angles

           tan θ = y / L

with the angle it is small,

          tan θ = sin θ / cos θ = sin θ

we substitute

         sin θ = y / L

         d y / L = m λ

the distance between the central maximum and an interference line is

        y = m λ L / d

let's reduce the magnitudes to the SI system

     λ = 546 nm = 546 10⁻⁹ m

     d = 0.25 mm = 0.25 10⁻³ m

let's substitute the values

      y = m 546 10⁻⁹ 1.3 / 0.25 10⁻³

      y =  m 2,839 10⁻³

the explicit value for a line depends on the value of the integer m, for example

for the first interference m = 1

the distance from the central maximum to the first line is y = 2,839 10-3 m

for the second interference m = 2

the distance from the central maximum to the second line is y = 5,678 10-3 m

Answer:

(a)    f = 0.58Hz

(b)    vmax = 0.364m/s

(c)    amax = 1.32m/s^2

(d)    E = 0.1J

(e)    [tex]x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]

Explanation:

(a) The frequency of the oscillation, in a spring-mass system, is calulated by using the following formula:

[tex]f=\frac{1}{2\pi}\sqrt{\frac{k}{m}}[/tex]          (1)

k: spring constant = 20.0N/m

m: mass = 1.5kg

you replace the values of m and k for getting f:

[tex]f=\frac{1}{2\pi}\sqrt{\frac{20.0N/m}{1.5kg}}=0.58s^{-1}=0.58Hz[/tex]

The frequency of the oscillation is 0.58Hz

(b) The maximum speed is given by:

[tex]v_{max}=\omega A=2\pi f A[/tex]     (2)

A: amplitude of the oscillations = 10.0cm = 0.10m

[tex]v_{max}=2\pi (0.58s^{-1})(0.10m)=0.364\frac{m}{s}[/tex]

The maximum speed of the mass is 0.364 m/s.

The maximum speed occurs when the mass passes trough the equilibrium point of the oscillation.

(c) The maximum acceleration is given by:

[tex]a_{max}=\omega^2A=(2\pi f)^2 A[/tex]

[tex]a_{max}=(2\pi (0.58s^{-1}))(0.10m)=1.32\frac{m}{s^2}[/tex]

The maximum acceleration is 1.32 m/s^2

The maximum acceleration occurs where the elastic force is a maximum, that is, where the mass is at the maximum distance from the equilibrium point, that is, the acceleration.

(d) The total energy of the system is:

[tex]E=\frac{1}{2}kA^2=\frac{1}{2}(20.0N/m)(0.10m)^2=0.1J[/tex]

The total energy is 0.1J

(e) The displacement as a function of time is:

[tex]x(t)=Acos(\omega t)=Acos(2\pi ft)\\\\x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]

Answer:

The new angular speed is [tex]w = 6 \ rev/s[/tex]

Explanation:

From the  question we are told that

      The angular velocity of the spin is  [tex]w_o = 3 \ rev/s[/tex]

       The  original moment of inertia is  [tex]I_o[/tex]

        The new moment of inertia is  [tex]I =\frac{I_o}{2}[/tex]    

Generally angular momentum is mathematically represented as

      [tex]L = I * w[/tex]

Now according to the law of conservation of momentum, the initial momentum is equal to the final momentum hence the angular momentum is constant so

         [tex]I * w = constant[/tex]

=>       [tex]I_o * w _o = I * w[/tex]

where w is the new angular speed  

  So  

          [tex]I_o * 3 = \frac{I_o}{2} * w[/tex]

=>        [tex]w = \frac{3 * I_o}{\frac{I_o}{2} }[/tex]

=>         [tex]w = 6 \ rev/s[/tex]

Answer:

A pie chart is a type of graph in which a circle is divided into sectors that each represents a proportion of the whole

Explanation:

pie charts are a useful way to organize data in order to see the size of components relative to the whole.