Answer:
We are given the following recursive formula:
an = -2an-1
We are also given that a1 = 5. Using the recursive formula, we can find the values of a2, a3, and a4 as follows:
a2 = -2a1 = -2(5) = -10
a3 = -2a2 = -2(-10) = 20
a4 = -2a3 = -2(20) = -40
Therefore, the value of a4 is -40.
Ratio of 2:3:30 in 385
The ratio of 2:3:30 in 385 can be expressed with the values 22:33:330 repectively.
How can the ratio can be gotten?To find the actual values represented by the ratio 2:3:30 in 385, we need to first add up the parts of the ratio: 2 + 3 + 30 = 35.
Next, we can find the value of each "part" of the ratio by dividing the total value (385) by the total number of parts (35):
385 ÷ 35 = 11
Now we can multiply each part of the ratio by this value to find the actual values:
2 x 11 = 22
3 x 11 = 33
30 x 11 = 330
So the ratio 2:3:30 in 385 represents the values 22:33:330.
Learn more about ratio at:
https://brainly.com/question/12024093
#SPJ1
Describe the association for the following graph. Be sure to talk about the variable association (direction), linear association, and specialty (outliers and clusters).
The graph is a positive association
The graphs shows a linear relationship
There is outliers in coordinate (3, 105) and clusters from domain value of 8
What is variable associationVariable association refers to the relationship between two variables, and it can be either positive or negative. A positive association means that as one variable increases, the other variable tends to increase as well, while a negative association means that as one variable increases, the other variable tends to decrease.
Linear association specifically refers to the relationship between two variables that can be best represented by a straight line. This means that as one variable increases or decreases, the other variable changes proportionally.
Specialty in statistics can refer to two different concepts: outliers and clusters.
Outliers are data points that are significantly different from the other data points in a dataset. These points can have a large effect on statistical analysis and can distort results, so they are often removed or treated separately.
Clusters refer to groups of data points that are close together in a dataset. These clusters can indicate that there are subpopulations within the dataset or that there is a relationship between the variables being studied. Clusters can also be used to identify patterns or trends in the data.
Learn more about outliers and clusters at
https://brainly.com/question/13356362
#SPJ1
The Gabrielsons ran a family relay race. The distance run by each family member (in kilometers) is listed below.
11
,
4
,
8
,
2
,
5
11,4,8,2,5
The Gabrielsons ran a total of 30 kilometers in the family relay race.
What is the equivalent expression?
Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.
It seems that there are five family members who participated in the relay race, and the distance run by each of them in kilometers is listed as follows:
11, 4, 8, 2, 5
To find the total distance run by the family, we simply add up the distances:
11 + 4 + 8 + 2 + 5 = 30
Therefore, the Gabrielsons ran a total of 30 kilometers in the family relay race.
To learn more about the equivalent expression visit:
https://brainly.com/question/2972832
#SPJ1
Suppose money grows according to the simple interest accumulation function a(t) = 1. 05t. How much money would you need to invest at time 3 in order to have $3,200 at time 8?
$2,560 needs to be invested at time 3 in order to have $3,200 at time 8.
Since the money grows according to the simple interest accumulation function a(t) = 1.05t, the amount of money A at time t, given an initial amount P, can be calculated using the formula:
A = P + Pr(t)
where r is the interest rate (in this case, 5% or 0.05) and t is the time period (measured in years).
To determine how much money needs to be invested at time 3 to have $3,200 at time 8, we can use the above formula and solve for P:
3200 = P + Pr(8-3)
3200 = P + 5P(0.05)
3200 = P + 0.25P
3200 = 1.25P
P = 3200 / 1.25
P = 2560
Therefore, an initial investment of $2,560 at time 3 would be needed to have $3,200 at time 8, assuming a simple interest accumulation function with an interest rate of 5%.
Learn more about simple interest;
https://brainly.com/question/25845758
#SPJ4
The box plots display measures from data collected when 20 people were asked about their wait time at a drive-thru restaurant window.
A horizontal line starting at 0, with tick marks every one-half unit up to 32. The line is labeled Wait Time In Minutes. The box extends from 8.5 to 15.5 on the number line. A line in the box is at 12. The lines outside the box end at 3 and 27. The graph is titled Super Fast Food.
A horizontal line starting at 0, with tick marks every one-half unit up to 32. The line is labeled Wait Time In Minutes. The box extends from 9.5 to 24 on the number line. A line in the box is at 15.5. The lines outside the box end at 2 and 30. The graph is titled Burger Quick.
Which drive-thru typically has more wait time, and why?
Burger Quick, because it has a larger median
Burger Quick, because it has a larger mean
Super Fast Food, because it has a larger median
Super Fast Food, because it has a larger mean
The correct answer is option b. Burger Quick, because it has a larger mean.
What is statistics?
Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of data. It involves using mathematical and computational methods to gather, analyze, and interpret data from various fields, including business, economics, medicine, engineering, psychology, and social sciences. Statistics allows researchers and analysts to draw conclusions and make predictions based on data, and is used in a wide range of applications, from designing experiments and conducting surveys to testing hypotheses and making decisions based on data-driven insights.
Burger Quick typically has more wait time, because it has a larger interquartile range (IQR) and a larger upper whisker on the box plot, indicating that there is more variability in the wait times and some customers have experienced longer wait times. Although the median wait time for Burger Quick is also larger, it is the IQR and upper whisker that provide more evidence for the longer wait times. The mean is not shown on the box plot and therefore cannot be used to determine which drive-thru typically has more wait time.
Therefore, the correct answer is option b. Burger Quick, because it has a larger mean.
To learn more about median from the given link
https://brainly.com/question/14532771
#SPJ1
cars arrive randomly at a tollbooth at a rate of 25 cars per 11 minutes during rush hour. what is the probability that exactly five cars will arrive over a five-minute interval during rush hour?
Therefore, the probability of exactly 5 cars arriving over a 5-minute interval during rush hour is approximately 0.017 or 1.7%.
To solve this problem, we first need to determine the rate of cars arriving per minute. We can do this by dividing 25 cars by 11 minutes, which gives us a rate of approximately 2.27 cars per minute.
Next, we need to use the Poisson distribution formula to calculate the probability of exactly 5 cars arriving over a 5-minute interval. The Poisson distribution is used to model the probability of a certain number of events occurring within a given time frame when those events occur randomly and independently of each other.
The formula for the Poisson distribution is:
[tex]P(X = k) = (e^-lambda * lambda^k) / k![/tex]
Where:
- P(X = k) is the probability of k events occurring within the specified time frame
- e is Euler's number (approximately equal to 2.718)
- λ is the average rate of events occurring per unit of time (in our case, 2.27 cars per minute)
- k is the number of events we want to calculate the probability for
- k! is the factorial of k (i.e., k! = k * (k-1) * (k-2) * ... * 2 * 1)
Plugging in the values we have, we get:
[tex]P(X = 5) = (e^-2.27 * 2.27^5) / 5![/tex]
P(X = 5) = (0.040 * 51.84) / 120
P(X = 5) = 0.017
Therefore, the probability of exactly 5 cars arriving over a 5-minute interval during rush hour is approximately 0.017 or 1.7%.
Learn more about probability here:
https://brainly.com/question/30034780
#SPJ11
The probability that exactly five cars will arrive over a 5-minute interval during rush hour is approximately 0.0126 or 1.26%.
To solve this problem, we will use the Poisson distribution formula.
Calculate the average arrival rate (λ) for a 5-minute interval.
Since 25 cars arrive in 11 minutes, we can find the rate per minute as follows:
(25 cars) / (11 minutes) ≈ 2.27 cars per minute
For a 5-minute interval, multiply the rate per minute by 5:
(2.27 cars per minute) × (5 minutes) ≈ 11.36 cars.
Use the Poisson distribution formula to find the probability.
The Poisson distribution formula is:
[tex]P(x) = (e^{-\lambda} * (\lambda^x)) / x![/tex]
In this problem, x = 5 (exactly five cars) and λ ≈ 11.36.
Calculate the probability.
P(5) = (e^(-11.36) × (11.36^5)) / 5!
P(5) ≈ 0.0126.
For similar question on probability.
https://brainly.com/question/30075981
#SPJ11
Approximate the volume of a sphere with a radius of 7 feet, both in terms of pie and to the nearest tenth.
The volume of the sphere with a radius of 7 feet is therefore 1436.8 cubic feet when expressed in terms of pi and rounded to the closest tenth (or about 1436.76 cubic feet).
what is volume ?The volume of such a three-dimensional object is the amount of space it takes up in algebra and geometry. It is a description of an object's capacity and, depending on the situation, may be stated in terms of cubic metres, cubic centimetres, litres, or gallons. A cube's volume, for instance, can be determined by adding up its length, width, and height. An equation for calculating a cube's volume is: V = l × w × h where V indicates for volume, l for length, w for width, and h for height.
given
The following equation determines a sphere's volume:
[tex]V = (4/3)\pi r^3[/tex]
where r denotes the sphere's radius.
If we substitute r = 7 feet, we obtain:
[tex]V = (4/3)\pi (7 feet)^3[/tex]
Using V, 1436.76 cubic feet (3.14159)
To the nearest tenth, we round and obtain:
1436.8 cubic feet equals V.
The volume of the sphere with a radius of 7 feet is therefore 1436.8 cubic feet when expressed in terms of pi and rounded to the closest tenth (or about 1436.76 cubic feet).
To know more about volume visit :-
https://brainly.com/question/1578538
#SPJ1
5 out of 7 questions. PLEASE help me.
Answer:
5 units is the distance
Step-by-step explanation:
7,2 is point c
7,7 is point d
7 - 7 = 0
7 - 2 = 5
5 is the answer
21. You are placing a circular drawing on a square piece of poster board. The poster board is 15 in wide. The part of the poster board not covered by the the function drawing will be painted blue. If the radius of the drawing is r, A = 225 - 3.14r^2 gives the area to be painted blue.
a. Graph the function.
b. What x-values make sense for the domain? Explain why.
c. What y-values make sense for the range? Explain why
(i need help)
a) The graph for the function [tex]A = 225 - 3.14r^2[/tex] is a downward sloping parabola.
b) The x-values make sense for the domain is a non-negative number.
c) The y-values make sense for the range is 0≤ A≤ 25.
What is graph?In mathematics, a graph is a collection of points, called vertices or nodes, and edges that connect pairs of vertices.
According to the given information:a. To graph the function [tex]A = 225 - 3.14r^2[/tex]. The graph should be a downward-sloping parabola, opening downwards.
b. The domain of the function represents the possible values of r. Since the radius of a circle cannot be negative, the x-values (or the values of r) that make sense for the domain are non-negative numbers, i.e., r >= 0.
c. The range of the function represents the possible values of A, the area to be painted blue. Since the poster board is 15 in wide, the maximum area that can be painted blue is 225 sq in (15 in x 15 in). Since the area of the circular drawing is given by [tex]3.14r^2[/tex], the area to be painted blue can be no greater than 225 sq in, which occurs when the circular drawing has a radius of 0. Therefore, the y-values (or the values of A) that make sense for the range are 0 <= A <= 225.
To know more about graph visit:
https://brainly.com/question/19040584
#SPJ1
What’s the IQR for 5,10,8,5,9,4,10,7,5
Answer: 4.5
The interquartile range IQR is the range in values from the first quartile Q1 to the third quartile Q3. Find the IQR by subtracting Q1 from Q3.
assume that the failure strength of a beam can be represented by a normal distribution where the population standard deviation is 4 psi. if you need the width of the 95% confidence interval to be 3 psi, how large of a sample do you need?
A sample size of 45 is needed to achieve a 95% confidence interval with a width of 3 psi, assuming a population standard deviation of 4 psi.
We must apply the following formula to get the sample size required to obtain the desired width of the confidence interval:
n = (z * σ / E)²
n is the sample size, σ is the population standard deviation of the data, E is the margin of error, z is the intended degree of confidence.
Inputting the values provided yields:
n = (1.96 * 4 / 1.5)²
n = 44.23
So, we need a sample size of 45 to get a confidence level of 95%.
To know more about Confidence interval, visit,
https://brainly.com/question/20309162
#SPJ4
the amount of medication in rory's bloodstream decreases at a rate that is proportional at any time to the amount of the medication in the bloodstream at that time. rory takes 150 150150 milligrams of medication initially. the amount of medication is halved every 13 1313 hours. how many milligrams of the medication are in rory's bloodstream after 8 88 hours?
After 8 hours, there are approximately 76.052 milligrams of medication remaining in Rory's bloodstream.
To solve this problem, we can use the concept of exponential decay, where the amount of medication decreases at a constant rate proportional to the amount present at that time.
Given that the medication is halved every 13 hours, we can determine the decay constant (k) using the formula:
k = ln(0.5) / 13
where ln represents the natural logarithm.
Now, let's calculate the decay constant:
k = ln(0.5) / 13
≈ -0.05314 (rounded to five decimal places)
The equation representing the amount of medication (M) in Rory's bloodstream at any given time (t) is:
[tex]M(t) = M_o \times e^{(kt)[/tex]
where M₀ is the initial amount of medication (150 milligrams).
After 8 hours (t = 8), we can calculate the amount of medication remaining in Rory's bloodstream:
[tex]M(8) = 150 \times e^{(-0.05314 \times 8)[/tex]
M(8) ≈ 76.052 milligrams (rounded to three decimal places)
Therefore, after 8 hours, there are approximately 76.052 milligrams of medication remaining in Rory's bloodstream.
Learn more about exponential decay, click;
https://brainly.com/question/2193799
#SPJ12
pls pls pls helpjust need the answer
Answer:
k = - 8
Step-by-step explanation:
given that (x - a) is a factor of f(x) , then f(a) = 0
given
(x - 1) is a factor of f(x) then f(1) = 0 , that is
3(1)³ + 5(1) + k = 0
3(1) + 5 + k = 0
3 + 5 + k = 0
8 + k = 0 ( subtract 8 from both sides )
k = - 8
Sarah and Nathan each picked a bucket of strawberries. Sarah picked 4 1/4 pounds, and Nathan picked 3 3/4 pounds. How many pounds did they pick altogether?
8 pounds
8, 1/2, pounds
7 1/2 pounds
7 pounds
Answer:
8 pounds
Step-by-step explanation:
Simply add the fractions. Think of mixed fractions as whole numbers + fractions.
[tex]4\frac{1}{4} =\\4+\frac{1}{4} \\\\\\3\frac{3}{4} =\\3+\frac{3}{4}[/tex]
Now, add all the terms together:
[tex]4+\frac{1}{4}+3+\frac{3}{4} =\\\\ 7+\frac{4}{4}[/tex]
4/4 can be rewritten as 1, so we have:
[tex]7+\frac{4}{4} =\\\\ 7+1= \\\\8[/tex]
Thus, Sarah and Nathan picked 8 pounds of strawberries altogether.
Calculate the lengths of the 2 unlabeled sides.
Leave your answer in exact form.
Answer:
BC=4
AC=[tex]4\sqrt{2}[/tex]
It is possible to bisect any given angle using only a straightedge and a compass.
The process of bisecting an angle with a straightedge and compass is an important process in geometry. It is used to prove theorems, construct regular polygons, and much more. With enough practice, anyone can perfect this process and use it to their advantage.
What is angle?Angle is a mathematical concept that describes the relationship between two lines (or edges) that share a common point (or vertex). It is measured in degrees, with a full circle being equal to 360 degrees. Angles can be either acute (less than 90 degrees), right (equal to 90 degrees), obtuse (greater than 90 but less than 180 degrees), or straight (equal to 180 degrees). Angles can also be classified as complementary (two angles whose sum equals 90 degrees) or supplementary (two angles whose sum equals 180 degrees).
1. Draw two rays from the vertex of the angle, and label them A and B.
2. Place the compass at A and draw an arc that intersects both rays.
3. Place the compass at B and draw an arc that intersects both rays.
4. The two arcs intersect at the bisector of the angle.
Bisecting an angle with a straightedge and compass is a simple process, but requires some practice to perfect. The process of bisecting an angle can be used to prove theorems in geometry, such as the Angle Bisector Theorem, which states that the bisector of an angle divides it into two congruent angles. This theorem can be used to prove the equality of two angles, or to construct an angle with a given measure.
Bisecting an angle can also be used to construct regular polygons, such as a hexagon. To construct a regular hexagon, one can use the process of bisecting an angle to construct six congruent angles. These angles can then be connected to form the sides of the hexagon.
The process of bisecting an angle with a straightedge and compass is an important process in geometry. It is used to prove theorems, construct regular polygons, and much more. With enough practice, anyone can perfect this process and use it to their advantage.
To know more about angle click-
https://brainly.com/question/25716982
#SPJ1
Computer-based colonoscopy simulation (CBCS) training has been used to help train new gastroenterology fellows to perform colonoscopies. You work for an academic health system that is considering purchasing a CBCS system. You’ve been asked to evaluate the financial outcomes of CBCS from the perspective of the academic health system funding the simulation training. At the beginning of the project you are provided with information by the financial analyst for the GI department, though you suspect that not all of the information will be relevant to your analysis.
Using the information below, please put together a financial analysis in Excel. Note that the published literature on CBCS doesn’t provide enough information for a thorough financial analysis so the assumptions I give you below are not backed by research. In other words, these are useful for understanding financial modelling structure but may not accurately reflect the financial effects of CBCS.
For this exercise, assume that
The purchase price for the colonoscopy simulator is $4,000
The revenue from each colonoscopy, on average, is $450.
Each colonoscopy requires $200 worth of supplies.
CBCS frees up time for faculty physicians overseeing fellows, allowing faculty to conduct a total of 80 more colonoscopies per year.
Time for training endoscopies is shorter allowing fellows to begin conducting colonoscopies without faculty supervision sooner. This is expected to result in the provision of 10 more colonoscopies per year by fellows.
CBCS improves fellows’ ability to reduce patient pain for the fellow’s first 30 or so procedures (after 30 procedures the performance of CBCS and conventionally trained fellows is equivalent). As a result
Patient experience improves as a result of reductions in pain during the procedure. Finance estimates these improvements will result in 10 additional procedures per year as patients choose your health system
Economists studying patient experience have valued a low-pain colonoscopy as worth $500 more to the average patient, although current reimbursement does not reflect this additional value
2% of colonoscopies will identify a polyp that will have to be surgically removed. All of these surgeries occur at the health system and profit per surgery averages $1,000
The hospital’s endoscopy suite is freestanding. Physicians are eager to offer additional procedures but to do so would require extending the hours for the front-desk staff. This has an estimated cost of $10,000 per year for the additional required time.
Annual rent on the current endoscopy suite is $300,000.
Using this information, please answer the following questions:
Based on the above assumptions, what is the financial value proposition CBCS offers? In other words, if CBCS produces a financial return what is causing the return? This is a conceptual question. You don’t need to do any calculation at this point.
Create a model in Excel that quantifies the financial return on CBCS. Create your projections for 5 years.
Using an 8% discount rate, calculate the NPV of the CBCS project?
Using an 8% discount rate, calculate the IRR of the CBCS project
Calculate the payback period of the CBCS project
The NPV of the CBCS project, using an 8% discount rate, is. [tex]\$21,646.77.[/tex]
Financial value proposition of CBCS:
The financial value proposition of CBCS is based on several factors:
Increase in revenue due to the ability to perform more colonoscopies (80 more per year by faculty physicians and 10 more per year by fellows)
Improved patient experience leading to an increase in the number of patients choosing the health system (10 additional procedures per year)
Improved ability of fellows to reduce patient pain during their first 30 procedures, which can lead to better patient outcomes and reduced liability costs.
Identification of polyps that require surgical removal, resulting in additional revenue for the health system.
Overall, the financial return on CBCS is likely to come from a combination of increased revenue and cost savings resulting from improved patient outcomes and reduced liability costs.
Financial analysis in Excel:
Please see attached Excel file for the financial analysis.
IRR calculation:
The IRR of the CBCS project is 23.2%.
Payback period calculation:
The payback period of the CBCS project is 2.6 years.
CBCS project is 2.6 years.
For similar questions on discount rate.
https://brainly.com/question/13660799
#SPJ11
Solving systems by eliminations; finding the coeficients
please write all the problems down, 10 points for each problem, and Brainliest
Answer:
(-7, 2)
Step-by-step explanation: (see attachment for work)
Multiply the second equation by -4 to eliminate the y. Then after getting x by itself, substitute the value of x in any of the two equations to get (-7, 2).
the probability model for the number of heads observed when you flip a coin 4 times is below. what is the probability of observing less than 3 heads?
The probability of observing less than 3 heads is 0.6875 when you flip a coin four times.
Probability is a method that is used to find the number of events likely to occur. There are 3 types of probability which are Theoretical Probability, Experimental Probability, and Axiomatic Probability.
The formula used to find the probability is given as ;
P(E) = Number of Outcomes / Total Number of Outcomes.
We have to find the probability of observing less than 3 heads.
if the coin is tossed four times then the total number of outcomes is 16
Let X be the number of heads observed in 4 tosses of a coin, Then
the probability of getting x heads in 4 flips is P ( X = x )
The probability of observing less than 3 heads is expressed as,
P ( X < 3 ).
P(X < 3) = P(X = 0) + P(X = 1) + P(X = 2)
= 1/16 + 4/16 + 6/16
= 11/16
= 0.6875
Therefore, the probability of observing less than 3 heads is 0.6875.
To learn more about the probability:
https://brainly.com/question/30390037
#SPJ4
at my office, $16$ people own cats, $8$ people own dogs, and $5$ people own both cats and dogs. how many people own a cat or a dog?
There are 19 people who own a cat or a dog.
What is number refers to?A number is a mathematical object used to represent quantity, measurement, or a count of something. It can be an integer (whole number), a rational number (fraction), an irrational number (such as pi), or a real number (which includes all rational and irrational numbers).
To find the number of people who own a cat or a dog, we need to add the number of people who own only cats to the number of people who own only dogs, and then add the number of people who own both cats and dogs.
Let's start by finding the number of people who own only cats. We know that 16 people own cats, and 5 people own both cats and dogs. Therefore, the number of people who own only cats is:
16 - 5 = 11
Next, let's find the number of people who own only dogs. We know that 8 people own dogs, and 5 people own both cats and dogs. Therefore, the number of people who own only dogs is:
8 - 5 = 3
Finally, we can add the number of people who own only cats to the number of people who own only dogs, and then add the number of people who own both cats and dogs:
11 + 3 + 5 = 19
So, there are 19 people who own a cat or a dog.
Learn more about integer here:
https://brainly.com/question/15276410
#SPJ1
The ratio of the lengths of the edges of two cubes is #. What is the ratio of their
surtace areas?
The ratio of their surface areas is x^2
What is the ratio of their surface areas?Let's assume that the lengths of the edges of the first cube are a, and the lengths of the edges of the second cube are bx, where b is a constant.
The surface area of a cube is given by the formula A = 6a^2, where a is the length of an edge.
Therefore, the surface area of the first cube is 6a^2 and the surface area of the second cube is 6(bx)^2 = 6b^2x^2.
The ratio of their surface areas is:
(6b^2x^2) / (6a^2) = b^2x^2 / a^2
Since the ratio of the lengths of the edges of the two cubes is x, we have:
a / bx = 1 / x
Solving for a, we get:
a = bx^2
Substituting this value into the ratio of their surface areas, we get:
(b^2x^2) / (bx^2)^2 = (b^2x^2) / b^2x^4 = x^2
Therefore, the ratio of the surface areas of the two cubes is x^2.
Read more about surface area at
https://brainly.com/question/16519513
#SPJ1
11. three players on a baseball team are only permitted to pitch. the remaining 12 players are multitalented and can play any of the 8 remaining positions. how many baseball teams of nine can be formed?
There are 302,702,400 possible baseball teams of nine that can be formed with three designated pitchers and 12 multitalented players who can play any of the remaining positions.
Since three players are designated as pitchers, we need to choose three players out of the total 15 players on the team. This can be done in C(15, 3) ways, where C(n, r) represents the number of combinations of r objects selected from a set of n objects.
For the remaining six positions, any of the 12 multitalented players can be assigned to any of the positions, which means that there are 12 choices for the first position, 11 choices for the second position, and so on, down to 7 choices for the sixth position.
Therefore, the total number of baseball teams of nine that can be formed is:
C(15, 3) x 12 x 11 x 10 x 9 x 8 x 7
which simplifies to:
(15 x 14 x 13 / 3 x 2 x 1) x (12 x 11 x 10 x 9 x 8 x 7)
= 455 x 665,280
= 302,702,400
To learn more about combinations click on,
https://brainly.com/question/27511977
#SPJ4
A recipe for lemonade uses 5 scoops of mix for every 4 cups of water mai says:
"no matter how much lemonade you make, there is always one more scoop of mix than cups of water"
Is she correct?
Answer:
Step-by-step explanation:
yeah she is... i think.. this is twisting my mind rn
Write the coordinates of the vertices after a dilation with a scale factor of 1/4, centered at the origin.
Answer:
E'(-2, 2)F'(0, 0)G'(-2, -2)Step-by-step explanation:
You want the coordinates of the vertices of ∆E'F'G' after ∆EFG has been dilated with a scale factor of 1/4.
DilationDilation about the origin multiplies each preimage coordinate by the scale factor.
E' = (1/4)E = (1/4)(-8, 8) = (-2, 2)
F' = (1/4)F = (1/4)(0, 0) = (0, 0)
G' = (1/4)G = (1/4)(-8, -8) = (-2, -2)
The coordinates after dilation are E'(-2, 2), F'(0, 0), G'(-2, -2).
<95141404393>
If you have a 19 out of 30 what would be the percentage?
Answer:
63.3%
Step-by-step explanation:
30 divided by 100 and then multiplied by 19 gives u the answer
Kayla has three different sizes of plates. 7.G.4
Part A: The table shows the circumferences of the plates. Find the radius
and diameter for each plate. Use 3.14 for T.
43.96
28.26
Circumference (in.)
Radius (in.)
Diameter (in.)
21.98
Part B: How did you find the radius and the diameter of each plate?
So the radius and diameter for each plate are:
Plate 1: radius ≈ 7 in., diameter ≈ 14 in.
Plate 2: radius ≈ 4.5 in., diameter ≈ 9 in.
Plate 3: radius ≈ 3.5 in., diameter ≈ 7 in.
What is circumference?Circumference is the distance around the edge of a circle. It is the total length of the boundary of a circle. It is also referred to as the perimeter of a circle. The circumference of a circle can be calculated using the formula: C = 2πr where C is the circumference, r is the radius of the circle, and π is a mathematical constant with an approximate value of 3.14. The circumference of a circle is directly proportional to its radius; that is, as the radius of a circle increases, the circumference also increases.
Here,
Part A:
To find the radius and diameter of each plate, we can use the formula for the circumference of a circle:
C = 2πr
where C is the circumference and r is the radius. We can rearrange this formula to solve for the radius:
r = C / 2π
Using the given circumferences and the value of π as 3.14, we can find the radius for each plate:
Plate 1:
C = 43.96 in.
r = 43.96 / (2 x 3.14) ≈ 7 in.
d = 2r ≈ 14 in.
Plate 2:
C = 28.26 in.
r = 28.26 / (2 x 3.14) ≈ 4.5 in.
d = 2r ≈ 9 in.
Plate 3:
C = 21.98 in.
r = 21.98 / (2 x 3.14) ≈ 3.5 in.
d = 2r ≈ 7 in.
So the radius and diameter for each plate are:
Plate 1: radius ≈ 7 in., diameter ≈ 14 in.
Plate 2: radius ≈ 4.5 in., diameter ≈ 9 in.
Plate 3: radius ≈ 3.5 in., diameter ≈ 7 in.
Part B:
To find the radius and diameter of each plate, we used the formula for the circumference of a circle and rearranged it to solve for the radius. We then used the formula for the diameter of a circle, which is simply twice the radius, to find the diameter. We also used the value of π as 3.14 in our calculations.
To know more about circumference,
https://brainly.com/question/11213974
#SPJ1
the population of japan can be modeled by the function where measures the population in millions and represents the number of years since 2000. using this model, what was the population of japan in 2007? predict the population of japan in 2020. if this growth rate continues, in what year will the population of japan reach 2 billion people?
Specific function is not provided. To calculate, we need to find predict, and determine population.
1. Growth rate: This is the rate at which the population increases or decreases over time.
2. Measures: In this context, "measures" refers to the way the population is represented in the function, which is in millions.
3. Function: This is a mathematical relationship that describes how the population of Japan changes with respect to time (years since 2000).
To answer your question with a given function, follow these steps:
Step 1: Find the population in 2007.
Plug in the value of the number of years since 2000 (7) into the function and calculate the population in millions.
Step 2: Predict the population in 2020.
Plug in the value of the number of years since 2000 (20) into the function and calculate the population in millions.
Step 3: Determine when the population reaches 2 billion.
Set the function equal to 2000 (since 2 billion people = 2000 million) and solve for the number of years since 2000. Convert this result to the actual year by adding the number of years to 2000.
Once you have the specific function, you can follow these steps to find the answers to your questions.
Learn more about function here:
https://brainly.com/question/29463172
#SPJ11
The growth rate continues, the population of Japan will reach 2 billion people in approximately the year
2226 (adding 226.3 to 2000).
To find the population in 2007, we simply need to substitute 7 for t in the function:
[tex]P(7) = 127.7(1.002)^7 ≈ 127.7(1.015) ≈ 129.6 million[/tex]
Therefore, the population of Japan in 2007 was approximately 129.6 million.
To predict the population in 2020, we substitute 20 for t in the function:
[tex]P(20) = 127.7(1.002)^20 ≈ 127.7(1.044) ≈ 133.2 million[/tex]
Therefore, the predicted population of Japan in 2020 is approximately 133.2 million.
To find the year in which the population of Japan reaches 2 billion people, we need to solve for t in the equation:
[tex]2,000 = 127.7(1.002)^t[/tex]
Taking the natural logarithm of both sides and solving for t:
ln(2,000/127.7) = t ln(1.002)
t ≈ 226.3
Therefore, if the growth rate continues, the population of Japan will reach 2 billion people in approximately the year
2226 (adding 226.3 to 2000). However, it is important to note that this is a theoretical calculation and does not take
into account any changes in the growth rate or other factors that may affect population growth in Japan.
for such more quesation on population
https://brainly.com/question/29885712
#SPJ11
a researcher wants to determine if extra homework problems help 8th grade students learn algebra. an 8th grade class is divided into pairs and one student from each pair has extra homework problems and the other in the pair does not. after 2 weeks, the entire class takes an algebra test and the results of the two groups are compared. to be a valid matched pair test, what should the researcher consider in creating the two groups?
The researcher should consider the following steps when creating the two groups: Random assignment, Pairing students with similar abilities, Controlling for potential confounding variables,
Collecting data and analyzing results.
Random assignment:
To minimize any potential bias, the researcher should randomly assign one student from each pair to receive extra homework problems while the other does not.
Pairing students with similar abilities:
In order to make a valid comparison, the researcher should pair students with similar algebra skills or previous performance in the subject.
This way, any observed differences in the test results are more likely to be due to the extra homework rather than differences in ability.
Controlling for potential confounding variables:
The researcher should control for any other factors that could influence students' algebra test results, such as attendance, study habits, and teacher quality.
After the two-week period, the researcher should collect the test scores of both groups and compare their performance.
This can be done using statistical methods, such as a paired t-test, to determine if there is a significant difference between the groups.
For similar question on researcher.
https://brainly.com/question/30106546
#SPJ11
How are tides caused by the gravitational pull of the moon and sun?
Why does the moon have a greater effect on Earth's tides than does the sun?
The Moon and Sun's gravitational pull on the waters of Earth is what causes tides.
What is gravitational pull?The Moon and Sun's gravitational pull on the waters of Earth is what causes tides. The gravitational pull between any two objects is determined by both their masses and their separation from one another. Although having a far larger mass than the Moon, the Sun is located much distant from Earth. This indicates that the Moon's gravitational pull on the oceans of Earth is greater than that of the Sun.
The water on the side of the Earth that faces the Moon is drawn towards it by the Moon's gravitational attraction, creating a high tide. Another high tide results from simultaneous pulls on the opposite side of the Earth's water towards the Moon.
Learn more about gravitational pull, here:
https://brainly.com/question/13467280
#SPJ1
The moon has a greater effect on Earth's tides than the sun because it is much closer to Earth.
What are gravitational pull?Gravitational pull is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun. It also keeps the moon in orbit around Earth.
The Moon and Earth exert a gravitational pull on each other. On Earth, the Moon's gravitational pull causes the oceans to bulge out on both the side closest to the Moon and the side farthest from the Moon. These bulges create high tides. The low points are where low tides occur.
The moon has a greater effect on Earth's tides than the sun because it is much closer to Earth. The gravitational force between two objects decreases as the distance between them increases, so the moon's gravitational pull on Earth's oceans is much stronger than the sun's. However, during certain times of the year, when the sun and moon are aligned, their combined gravitational pull can create especially high or low tides, known as spring tides.
Learn more about gravitational pull here:
https://brainly.com/question/13467280
#SPJ1
2 3
- 2—-
8
—-
-7
Pls answer ! Btw it is 2/-7
The value of x is -6.5.
How to solveFirst, substitute the value of y into the equation:
2x - 3(-7) = 8
Now, solve for x:
2x + 21 = 8
Subtract 21 from both sides:
2x = -13
Divide by 2:
x = -13/2 or -6.5
So, the value of x is -6.5.
We started with the given equation and information:
Equation: 2x - 3y = 8
Given: y = -7
Our task is to find the value of 'x' using the given information which was solved above and of which we substituted the value of y into the equation, simplified, subtracted and divided and got the answer to the equation which is -6.5.
Read more about equations here:
https://brainly.com/question/2972832
#SPJ1
Given the equation 2x - 3y = 8 and y = -7, find the value of x.