Answer:
d = 0.53 g/mL
Explanation:
Given that,
Mass of an unknown metal = 40 g
The volume of the metal = 75 mL
We need to find the density of the metal. We know that,
Density = mass/ volume
[tex]d=\dfrac{40\ g}{75\ mL}\\\\d=0.53\ g/mL[/tex]
So, the density of the metal is 0.53 g/mL.
An organism's _______ describes its genetic composition. An organism's _______ describes its appearance or observable characteristics.
a) phenotype; genotype
b)heredity; species
c)species; heredity
d) genotype; phenotype
Does anyone know how kinetic energy and crater diameter are related??
Answer:
Crater size is related to the mass and velocity of the impacting body. Mass and velocity can be combined to find the kinetic energy of an impactor. ... This fundamental physical relationship allows an estimate of impactor mass to be made from crater diameter.
Explanation:
El ácido sulfúrico H2SO4 es uno de los compuestos que se utiliza para la producción de fertilizantes como el nitrosulfato amónico. Si disponemos de 8 mL de H2SO4 al 37 %P/P (d=1,26 g /mL), los cuales se disolvieron hasta alcanzar un volumen de solución de 400 mL, con una densidad de 1,08 g/mL. (La densidad del soluto es corresponde a 1,83 g/cm³)
Explanation:
12 hours ago
El ácido sulfúrico H2SO4 es uno de los compuestos que se utiliza para la producción de fertilizantes como el nitrosulfato amónico. Si disponemos de 8 mL de H2SO4 al 37 %P/P (d=1,26 g /mL), los cuales se disolvieron hasta alcanzar un volumen de solución de 400 mL, con una densidad de 1,08 g/mL. (La densidad del soluto es corresponde a 1,83 g/cm³)
I need help with this please
Answer:
raising the Concentration of liquid
raise the temperature of the system
bubbles of hydrogen gas
a b c or d ..........
Answer:
B
Explanation:
Radiation from ultraviolet rays can cause vision problems and sunburn.
write the balance equation of ammonium sulfide + aluminum chloride
Answer:
3(NH4)2S + 2AlCl3 → 6NH4Cl + Al2S3
Explanation:
Firstly, ammonium sulfide has a chemical formula of (NH4)2S while aluminum chloride has a chemical formula of AlCl3. These two chemical substances react as follows:
(NH4)2S + AlCl3 → NH4Cl + Al2S3
This chemical equation is however, unbalanced. To balance the chemical equation, one has to ensure that the atoms of each element on both the reactant and product side equates with one another.
If we carefully observe each atom on both the reactants and product side, we will have the following balanced equation:
3(NH4)2S + 2AlCl3 → 6NH4Cl + Al2S3
That is;
- 6 moles of N and Cl on both sides
- 24 moles of H on both sides
- 3 moles of S on both sides
- 2 moles of Al on both sides
Which of the following aqueous solutions would boil at the highest temperature?
A) 100 g of NaCl in 125 g of water
B) 100 g of NaCl in 250 g of water
C) 100 g of NaCl in 500 g of water
D) 100 g of NaCl in 1000 g of water
A H2CO3 (aq) ---> CO2 (g) + H2O (l) B H2SO4 (aq) + 2NaOH (aq) ---> Na2SO4 (aq) + 2H2O (l) C 2H2 (g) + O2 (g)----> 2H2O (l) D AgNO3 (aq) + NaOH (aq) ---> AgOH (s) + NaNO3 (aq) Which equation above represents a precipitation reaction?
Answer: [tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The equation which represents a precipiation reaction is:
[tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]
Whats is tge electron configuration of Ag2+ please answer asap..
Answer:
1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10
Explanation:
To write the configuration for the Silver and the Silver ion, first we need to write the electron configuration for just Silver (Ag). We first need to find the number of electrons for the Ag atom (there are 47 electrons) using the Periodic Table. When we write the configuration, we'll put all 47
Either way, the Silver electron configuration will be 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s1
Note that when writing the electron configuration for an atom like Ag and Ag+, the 4d is usually written before the 5s. Both of the configurations have the correct numbers of electrons in each orbital, it is just a matter of how the electronic configuration notation is written (see below for an explanation why).
For the Ag+, called the Silver ion, we remove one electron from 5s2 leaving us with:
1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10
Suppose you crushed an antacid tablet before dissolving it in a glass of water. The crushed antacid tablet would:
a. take the same amount of time to dissolve as a whole antacid tablet.
b. dissolve more slowly than a whole antacid tablet.
c. take more time to dissolve than a whole antacid tablet.
d. dissolve more quickly than a whole antacid tablet.
Explanation:
dissolve more quickly than a whole antacid tablet.
A student mixes a dark green solution with water, and the result is pale green. Is this likely a chemical change or not? Explain.
Answer:
This is not a chemical change
Explanation:
The dark green solution mixed with the water, but the water is still water. There were no bubbles, smell, temperature change, or any other signs of a chemical change
Have a great day!
A student mixes a dark green solution with water, and the result is pale green. This is a physical change.
What are physical change and chemical change?Composition distinguishes a physical change from a chemical change. A physical change is a difference inside the look, smell, or straightforward presentation of a material sample without the need for a change in composition, whereas a chemical change alters the makeup of the substances in issue.
Despite the fact that we refer to them as physical "reactions," nothing is actually changing. A change in the substance in question's elemental composition is necessary for a reaction to occur. So, from now on, we will simply refer to bodily "reactions" as physical changes. A student mixes a dark green solution with water, and the result is pale green. This is a physical change.
Therefore, a student mixes a dark green solution with water, and the result is pale green. This is a physical change.
To know more about physical change and chemical change, here:
https://brainly.com/question/11946229
#SPJ2
what are 3 types of mutations
1- Base substitutions.
2- Deletions.
3- Insertions.
What are the procedures for performing an acid property test
Answer:
In the context of transaction processing, the acronym ACID refers to the four key properties of a transaction: atomicity, consistency, isolation, and durability. Atomicity. All changes to data are performed as if they are a single operation
What mass of methane (CH4) gas occupies a volume of 0,462 L at 1atm and 273K
Explanation:
Since methane gas is at 1 atm and 273 K, it is at standard temperature and pressure(STP).
One mole of every gas occupies 22.4 dm^3 at STP, and vice versa. So,
22.4 dm^3 at STP of CH4=1 mol=12+4(1)=16 g
0.462 L(0.462 dm^3) at STP of CH4
=(16 g×0.462 dm^3)/22.4 dm^3
=0.33 g
barium can be analyzed by precipitating it as BaSO4 and determining the mass of the precipitate. When 0.269 g sample of barium compound was treated with excess H2SO4, 0.0891g BaSO4 formed. what percentage of Barium is in the compound?
Answer:
Percentage of Ba in the compound is 19.5%
Explanation:
A sample of gas is collected over water at a temperature of 35.0◦C when the barometric pressure reading is 642 torr. What is the partial pressure of the dry gas, given PH2O = 42.2 torr? Answer in units of torr.
Answer: The partial pressure of the dry gas is 599.8 torr
Explanation:
According to Dalton's law, the total pressure is the sum of individual pressures.
[tex]p_{total}=p_{dry gas}+p_{H_2O}[/tex]
Given : [tex]p_{total}[/tex] =total pressure of gases = 642 torr
[tex]p_{dry gas}[/tex] = partial pressure of dry gas = ?
[tex]p_{H_2O}[/tex] = partial pressure of water = 42.2 torr
putting in the values we get:
[tex]642torr=p_{\text {dry gas}}+42.2torr[/tex]
[tex]p_{\text {dry gas}}=599.8torr[/tex]
Thus the partial pressure of the dry gas is 599.8 torr
A B C D ............
Answer:
I think gamma, I'm not sure tho
Sulfur hexafluoride, SF6, is a colorless, odorless, very unreactive gas. Calculate the pressure (in atm) exerted by 2.02 moles of the gas in a steel container of volume 6.21 L at 70 ℃.
Answer:
9.15 atm
Explanation:
Ideal gas equation of state PV=nRT
P in hPa, V in L, n in mol, R is a constant which is 83.1 hpa*L/mol*k, T in kelvin.
Plug in all the number, and we will get:
P*6.21=2.02*83.1*343
P =9271.6(in hpa)=9.15 atm
What is the density of tellerium tribromide at 743.5 torr and 23.2 °C
Answer: The density of tellerium tribromide is 14.8 g/L
Explanation:
The relation between density and Molar mass:
[tex]d=\frac{PM}{RT}[/tex]
P = pressure of gas = 743.5 torr = 0.98 atm (760torr=1atm)
M = Molar mass = 367 g/mol
R = gas constant =[tex]0.0821Latm/Kmol[/tex]
T = temperature =[tex]23.2^0C=(23.2+273)K=296.2K[/tex]
[tex]n=\frac{PV}{RT}[/tex]
[tex]d=\frac{0.98atm\times 367g/mol}{0.0820 L atm/K mol\times 296.2K}=14.8g/L[/tex]
The density of tellerium tribromide is 14.8 g/L
If the sun is out all day, why is it not warm during an Arctic summer?
Answer:
The primary reason is that the sun is low on the horizon all day. Thus, solar energy needs to pass through more atmosphere to get to the ground.
Explanation:
Hope this helps. :)
Answer:
Most all of the visible light striking the snow or ice surface is reflected back without any particular preference for a single color. Most natural materials absorb some sunlight, which gives them their color. Clean snow, however, reflects most of the sunlight, creating a white appearance.
[ I commented on the other answer with the same little add-on, then I realised I could add an answer. Even though this is four days ago, meaning the person who asked the question doesn't need another answer, I hope to give someone else who might be looking at this some insight. ]
2Na + 2H2O → 2NaOH+ H2
How many grams of sodium would be needed to produce 1.00kg of sodium hydroxide?
Answer:
575 g
Explanation:
1 kg of sodium hydroxide is 1000/40=25 mol.
So 25 mol of sodium will be needed.
25 mol of sodium is 575 g.
According to the stoichiometry of the given chemical equation, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
46 g sodium gives 80 g sodium hydroxide, thus 1000 g sodium hydroxide requires 46×1000/80=575 g sodium.
Thus, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ2
Is farting an example of an exothermic reaction?
*for real though I have never heard of a cold fart
Answer:
i would assume i mean who has cold farts
Explanation:
Yes, farting is an example of an exothermic reaction.
What is an exothermic reaction?A reaction that is chemical in nature and is characterized by the release of energy in the form of heat or light is called an exothermic reaction.
Farting is a normal part of digestion that reflects the activity of the bacteria in your gut.
Yes, farting is an example of an exothermic reaction.
Learn more about the exothermic reaction here:
https://brainly.com/question/10373907
#SPJ2
Which is an example of a homoozygous genotype? (There can be more than one answer)
Hh
HH
hh
Answer:
HH and hh
Explanation:
they are the same
Photosynthesis is an example of an __
process.
The atom has 2 different types of subatomic particles.
True or False
Answer:
False
Explanation:
There is three
Need help with this chemistry problem
What does the root “thermal” mean?
Please Help
I will give you Brainliest
Answer:
If it has to do with heat, it's thermal. ... The Greek word therme, meaning “heat,” is the origin of the adjective thermal. Something that is thermal is hot, retains heat, or has a warming effect.
Explanation:
hope it helps :)
The charge of the Fe ion in the compound FeO is blank
The charge of the Fe ions in the compound Fe2O3 is
blank
Answer:
For Feo is 2+
For Fe2O3 is 3+
Btw I did it and got it right!
Explanation:
The charge of the Fe ion in the compound [tex]\rm FeO[/tex]is +2 and the charge of the Fe ions in the compound [tex]\rm Fe_2O_3[/tex] is +3, respectively.
Ion can defined as any atom or molecule having positive or negative charge on it.
In [tex]\rm FeO[/tex]: In the compound, oxygen is in group 16 and has a charge of -2, the iron ion must have a charge of +2 to balance the charges and make the compound neutral.
In [tex]\rm Fe_2O_3[/tex]: In the compound, oxygen is in group 16 and has a charge of -2, the three oxygen atoms in [tex]\rm Fe_2O_3[/tex] contribute to a total charge of -6. To make the compound neutral, the two iron ions must have a total charge of +6. Therefore, each iron ion must have a charge of +3 to balance the charges and make the compound neutral.
Therefore, Fe ion has a charge of +2 in the compound [tex]\rm FeO[/tex] and has a charge of +3 in the compound [tex]\rm Fe_2O_3[/tex].
Learn more about ion here:
https://brainly.com/question/29183072
#SPJ4
In the Haber reaction shown below, _______?is the
limiting reactant if equal moles of each reactant are used.
3H2 + N2 -> 2NH3
Answer: hydrogen
Explanation:
What is the formula unit for a compound made from Li and Cl? (5 points)
LiCl because the total negative charge on Cl is one.
LiCl because the total negative charge on Li is two.
Li2Cl because the total positive charge on Cl is one.
Li2Cl because the total positive charge on Li is two.
Answer:
LiCl because the total negative charge on Cl is one.
Explanation:
Lithium has a charge of 1+ and Chlorine has a charge of 1-.
There are two types of chemical compound one is covalent compound and other is ionic compound. LiCl because the total negative charge on Cl is one. The correct option is option A.
What is chemical Compound?
Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
Covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Ionic compounds are hard, these have higher melting and boiling point than the covalent compounds. Li act as cation Li⁺ and Cl act as Cl⁻. These two combine to form LiCl. LiCl is an ionic compound.
Therefore, LiCl because the total negative charge on Cl is one. The correct option is option A.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ5