If A=QR, where Q has orthonormal columns, what is the relationship between R and QT?

The modelled  expression on the number line is -3 ≤  x  ≤ 7

Recall that an inequality is a relationship between two expressions or values that are not equal to each other in mathematics.

A number line is a pictorial representation of numbers on a straight line  It is used to compare numbers that are placed sequentially at equal distances along its length and it can be extended infinitely in any direction and is usually represented horizontally.

The range of numbers is from -3 to +7

Putting this in inequality form we have -3 ≤  x  ≤ 7

This implies that the values of the number on the number line ranges from -3 to a +7

Learn more about a number line on https://brainly.com/question/16191404

#SPJ1

QUESTION 13: The maximum predictive score possible for a person with 5 on job knowledge and 100 on conscientiousness is 105.
QUESTION 14: Asking all job candidates questions from the same interview schedule in the same way is an example of maintaining consistency and fairness during the interview process.

Answer to QUESTION 13:

The equation Job performance = 10 + (5*job knowledge) + (0.7* conscientiousness) is a formula used to predict an individual's job performance based on their job knowledge and conscientiousness scores. The equation assumes that job knowledge has a stronger influence on job performance than conscientiousness, as the coefficient for job knowledge is higher (5) than that for conscientiousness (0.7).

If an individual scored 5 on job knowledge and 100 on conscientiousness, they would have the maximum predictive score possible, which would be calculated as follows:

Job performance = 10 + (5*5) + (0.7*100) = 47

So, their predicted job performance score would be 47.

Answer to QUESTION 14:

Asking all job candidates questions from the same interview schedule in the same way is an example of standardized interviewing. Standardized interviewing is a method used to ensure that all job candidates are evaluated fairly and consistently, by asking them the same questions in the same way. This reduces the potential for bias and improves the validity and reliability of the interview process.

QUESTION 13:
In the given equation, Job performance = 10 + (5 * job knowledge) + (0.7 * conscientiousness). If a person scores the maximum of 5 on job knowledge and 100 on conscientiousness, we can calculate their job performance score:

Job performance = 10 + (5 * 5) + (0.7 * 100)
Job performance = 10 + 25 + 70
Job performance = 105

So, the maximum predictive score possible for a person with 5 on job knowledge and 100 on conscientiousness is 105.

QUESTION 14:
Asking all job candidates questions from the same interview schedule in the same way is an example of maintaining consistency and fairness during the interview process. This approach helps to ensure that all candidates are evaluated on an equal basis, reducing potential biases and increasing the reliability of the evaluation process.

To learn more about predictive score, click here:

brainly.com/question/16983672

#SPJ11

After the test statistic we find that the critical t-value is 2.681. Since the absolute value of the test statistic (-2.78) is greater than the critical t-value (2.681), we can reject the null hypothesis.

The test statistic can be calculated as follows:
t = (399 - 408) / (sqrt(121/13)) = -2.78  Since the absolute value of the test statistic (-2.78) is greater than the critical t-value (2.681), we can reject the null hypothesis.

To answer your question, we will conduct a hypothesis test to determine if there is sufficient evidence at the 0.02 significance level that the bags are underfilled or overfilled.

Step 1: State the hypotheses
H0 (null hypothesis): The population means (μ) is 408 grams.
H1 (alternative hypothesis): The population means (μ) is not equal to 408 grams.

Step 2: Determine the test statistic
Since we know the population variance, we will use a z-test. The formula for the z-test statistic is:

z = (sample mean - population mean) / (population standard deviation/sqrt (sample size))

z = (399 - 408) / (sqrt(121) / sqrt(13))

Step 3: Calculate the z-value
z = (-9) / (11 / sqrt(13))
z ≈ -2.58

Step 4: Determine the critical value
For a two-tailed test at the 0.02 significance level, we need to find the critical value. Using a z-table, we find the critical values are approximately -2.33 and +2.33.

Step 5: Compare the z-value to the critical values
Our calculated z-value (-2.58) is less than the lower critical value (-2.33).

Step 6: Draw a conclusion
Since our z-value falls in the rejection region, we reject the null hypothesis. There is sufficient evidence at the 0.02 significance level to conclude that the chocolate chip bag-filling machine is either underfilling or overfilling the bags when set to 408 grams, assuming the population is normally distributed.

Learn more about Test Statistic:

brainly.com/question/14128303

#SPJ11

The length of diagonal of square is 141.14 m.

We have,

Area of square = 100 square meter

So, the side of square is

Side = √Area

side= √100

side= 10 m

Now, the diagonal of square

= √2 a

= 10√2

= 14.14 m

Learn more about Area here:

https://brainly.com/question/27683633

#SPJ1

Marginal Effect for 75-year-old: -543.32 4. Age at which wealth is maximized: 70.55 years 5. Maximum wealth: 742,752.24
1. To find the marginal effect formula in Model 2, we'll take the derivative of the wealth equation with respect to age:

Marginal Effect = d(Wealth)/d(Age) = 10,400.1241 - (2 * 73.7597 * Age)

So the formula for the marginal effect is:
Marginal Effect = 10,400.1241 - 147.5194 Age

2. To calculate the marginal effect for a 50-year-old:
Marginal Effect = 10,400.1241 - (147.5194 * 50)
Marginal Effect ≈ 3,225.11

3. To calculate the marginal effect for a 75-year-old:
Marginal Effect = 10,400.1241 - (147.5194 * 75)
Marginal Effect ≈ -543.32

4. To find the age at which wealth is maximized, set the marginal effect to zero and solve for age:
0 = 10,400.1241 - 147.5194 Age
Age ≈ 70.55 years

5. To find the maximum wealth, plug the age at which wealth is maximized (70.55 years) back into Model 2:
Wealth = 4,265.20 + 10,400.1241 * 70.55 - 73.7597 * (70.55)^2
Wealth ≈ 742,752.24

Your answer:
1. Marginal Effect = 10,400.1241 - 147.5194 Age
2. Marginal Effect for 50-year-old: 3,225.11
3. Marginal Effect for 75-year-old: -543.32
4. Age at which wealth is maximized: 70.55 years.
5. Maximum wealth: 742,752.24

Learn more about Marginal Effect here:

brainly.com/question/30409544

#SPJ11

This fraction gets smaller as m gets larger (holding n fixed), so a larger set A makes it less likely that a random binary relation from A to B will be a function.

a. To define a binary relation from A to B, we need to specify whether or not each ordered pair of elements in A and B is in the relation. Since there are m choices for the first element of each ordered pair, and n choices for the second element, there are a total of m × n possible ordered pairs. Therefore, there are 2^(mn) possible binary relations from A to B, since each ordered pair can either be in or not in the relation.

b. A function from A to B is a special kind of binary relation, where each element in A is paired with exactly one element in B. Therefore, to specify a function, we must choose an element of B for each of the m elements of A. For the first element of A, we have n choices, for the second element of A, we have n - 1 choices (since we cannot choose the same element as we did for the first element), and so on, until we get to the mth element of A, for which we have n - (m - 1) = n - m + 1 choices. Therefore, the total number of functions from A to B is given by:

n(n - 1)(n - 2) ... (n - m + 1) = n!/(n - m)!

c. Since a function is a binary relation where each element in A is paired with exactly one element in B, it follows that there are n possible choices for the second element of each ordered pair. Therefore, the fraction of binary relations that are functions is given by:

number of functions / total number of binary relations

= n!/(n - m)! / 2^(mn)

= n! / (n - m)! / (2^m)^n

= n! / (n - m)! / (2^m * n)^m

This fraction gets smaller as m gets larger (holding n fixed), so a larger set A makes it less likely that a random binary relation from A to B will be a function.

To learn more about fraction visit:

https://brainly.com/question/10354322

#SPJ11

It is about the relationship between the magnitude of the cross product of two vectors and the product of their magnitudes. If u and v are in V3, then |u * v| ≤ |u||v|

Let's use the terms u, v, V3, and |u * v| in the answer.

In V3 (a 3-dimensional vector space), let u and v be two vectors. The magnitude of the cross product of u and v can be represented as |u * v|. According to the properties of the cross product, we have:

|u * v| ≤ |u||v|

This inequality means that the magnitude of the cross product of two vectors (|u * v|) is always less than or equal to the product of the magnitudes of the individual vectors (|u||v|). This result is known as the Cauchy-Schwarz inequality, which applies to vectors in any dimension, including V3.

In summary, if u and v are in V3, then |u * v| ≤ |u||v|.

More on vectors: https://brainly.com/question/29740341

#SPJ11

The estimated number of people in the city who spend between 10 - 14 hours a week on social media, is 24, 187 people .

The survey showed that 90 people out of 350 would spend about 10 - 14 hours a week on social media. In percentage terms, this would be:

= 90 / 350 x 100 %

= 25. 7 %

The survey can be applied to the entire population of Sunrise, FL to find out the approximate number of people in the town who spend between 10 - 14 hours on social media. This number would be:

= Percentage shown by survey x Population

= 25. 7 % x 94, 060

= 24, 187 people

Find out more on population at https://brainly.com/question/29101183

#SPJ1

The first part of the question is:

A survey showed that out of 350 people in Sunrise, FL, 90 people spend between 10 - 14 hours a week on social media.

The correct answer is (A) I only. A 90 percent confidence interval for the difference in means will contain the value 0.

A p-value is a measure of the strength of evidence against the null hypothesis. In this case, the null hypothesis is that the difference between the means of the two samples is zero, while the alternative hypothesis is that the mean of the first sample is greater than the mean of the second sample.

A p-value of 0.03 means that there is evidence to reject the null hypothesis at a significance level of 0.03. This also means that we can reject the null hypothesis at a higher significance level, such as 0.10 or 0.05. Therefore, a 90 percent confidence interval for the difference in means will not contain the value 0, as we have evidence that the means are different.

However, we cannot make conclusions about the 95 percent or 99 percent confidence intervals, as we do not know the actual confidence intervals or the true difference in means.

To learn more about null hypothesis visit: https://brainly.com/question/28920252

#SPJ11

The point A after reflection over the line y = 1 becomes A' (-3,3).

Reflection is the transformation which produces a mirror image of an object. The mirror image can be either about any line.

In our question,

The object is a triangle ∠ABC and the line is y=1.

Point A before reflection (equation 1):

A = (-3,-1)

After reflection, the point is shifted along y axis and x remains constant.

Reflection about y=1 of point A:

A ⇔ A'

( x, y) ⇔ ( x, y+4)'

Put the values of x and y using equation 1.

(-3, -1) ⇔ ( -3, -1+4)'

(-3, -1) ⇔ (-3, -1) ⇔ ( -3, -1+4)'

Hence the point A will transform to the point A' (-3, 3) after reflecting about y=1.

Learn more about  reflection on https://brainly.com/question/30270479

#SPJ1

A statement about the system of equations that is true is: A. in the system of equations, x represents the number of liters of acid in solution A, and y represents the number of liters of acid in solution B.

The expression 0.30y represents: B. the number of liters of acid in solution C that come from solution B.

If the system of equations is graphed in a coordinate plane, the x-coordinate of the intersection of the two lines is 2.5.

The number of liters of solution B the chemist mixes with solution

A to create solution C containing 25% acid is 7.5 liters.

In order to write a system of linear equations to describe this situation, we would assign variables to the number of liters of acid in solution A and the number of liters of acid in solution B respectively, and then translate the word problem into an algebraic equation (linear equations) as follows:

Since the chemist mixed the two solutions to make 10 liters of a third solution, solution C, containing 25% acid, a system of linear equations that models the situation is given by;

x + y = 10

10%x + 30%y = 25% ⇒ 0.10x + 0.3y = 2.5

By solving the system of linear equations simultaneously, we have:

0.10(10 - y) + 0.3y = 2.5

y = 7.5 liters.

x = 10 - y = 10 - 7.5 = 2.5 liters.

Read more on linear equation here: brainly.com/question/25858757

#SPJ1

The probability of the red die showing a 5 is 1/6 since there are 6 possible outcomes on a die and only one of them is a 5. The same goes for the blue die. Therefore, the probability of both dice showing a 5 is 1/6 x 1/6 = 1/36. So the reduced fraction for this probability is 1/36.

The probability of the red die showing a 5 and the blue die showing a 5 can be calculated by finding the individual probabilities and multiplying them.

For each die, there are 6 possible outcomes (1-6), and only one of those outcomes is a 5. So, the probability of getting a 5 on a single die is 1/6.

Now, multiply the probabilities for the red die and the blue die:
(1/6) * (1/6) = 1/36

So, the probability of the red die showing a 5 and the blue die showing a 5 is 1/36 as a reduced fraction.

Learn more about probability here:

https://brainly.com/question/14210034

#SPJ11

In this process, 1.35 moles of oxygen are combined with roughly 1.80 moles of aluminum.

The balanced chemical equation for the reaction between aluminum and oxygen is:

4 Al + 3 O₂ → 2 Al₂O₃

Therefore, 3 moles of oxygen gas (O₂) are needed to react with 4 moles of aluminum (Al) to form 2 moles of aluminum oxide (Al₂O₃).

We are provided 1.35 moles of oxygen gas, thus we can create a percentage using this data to determine how many moles of aluminum are needed:

4 moles Al / 3 moles O₂ = x moles Al / 1.35 moles O

Solving for x, we get:

x = 4 moles Al * 1.35 moles O₂ / 3 moles O₂

x ≈ 1.80 moles Al

Therefore, approximately 1.80 moles of aluminum will be used when reacted with 1.35 moles of oxygen in this reaction.

Learn more about chemistry reactions here:

https://brainly.com/question/29039149

#SPJ1

The best findings that support the hypothesis that NPY is necessary for the generation of the preovulatory LH surge include studies that show NPY acting on neurons in the hypothalamus, which is a critical brain region involved in regulating reproductive functions.

Additionally, experiments in animals have shown that disrupting NPY signaling can prevent the preovulatory LH surge and ovulation. Finally, clinical studies in women have found that alterations in NPY levels or activity can lead to menstrual irregularities and infertility, further supporting the role of NPY in ovulation.
To best support the hypothesis that NPY (neuropeptide Y) is necessary for the generation of the preovulatory LH (luteinizing hormone) surge, which triggers ovulation, scientists would need to find evidence such as:

1. A positive correlation between NPY levels and LH surge timing, indicating that higher NPY levels are associated with the initiation of the LH surge.
2. Experimental manipulation of NPY levels leading to changes in LH surge and ovulation, showing a cause-and-effect relationship between NPY and the hormonal event.
3. Identification of NPY receptors on the gonadotropin-releasing hormone (GnRH) neurons, which are responsible for releasing LH, suggesting a direct mechanism of action.

These findings would provide strong evidence for the proposed role of NPY in the generation of the preovulatory LH surge and ovulation.

To learn more about hypothesis  visit;

https://brainly.com/question/29519577

#SPJ11

a. Both samples were randomly selected from their populations and c. Individual observations in each sample can be considered independent, and the samples themselves are independent.

Explanation: To use a two-sample interval to estimate the difference between the proportion of each type of fruit that has the disease, the following conditions must be met:
a. Both samples were randomly selected from their populations (this ensures that the samples are representative of their respective populations)
b. The observed counts of successes and failures are sufficiently large in each sample (this ensures that the normal approximation can be used)
c. Individual observations in each sample can be considered independent, and the samples themselves are independent (this ensures that the samples are not related to each other in any way)

In this scenario, Kumari took separate random samples of each type of fruit, meeting the conditions of random selection and independence for both samples. Additionally, the observed counts of successes and failures are sufficiently large (3 of 10 oranges and 1 of 15 tangerines), meeting the condition of large enough counts. Therefore, conditions a and c are both met.
Based on the information provided, Kumari's samples met the following conditions for a two-sample interval estimation:

a. Both samples were randomly selected from their populations
c. Individual observations in each sample can be considered independent, and the samples themselves are independent.

The observed counts of successes and failures (condition b) are not sufficiently large in each sample, as a general rule of thumb is to have at least 10 successes and 10 failures in each sample. In this case, the numbers of diseased and healthy fruits in each sample do not meet this criterion.

Visit here to learn more about populations brainly.com/question/27991860

#SPJ11

The measure of the missing side is t = 5

Trigonometric identities are described as equalities that are known to be hold the true measure of all the values in an equation.

The different trigonometric identities are;

Using the Pythagorean theorem such that the square of the hypotenuse is equal to the sum of the squares of the other two sides of the triangle

This is represented as;

13² = 12² + t²

find the square values, we have;

169 = 144 + t²

collect the like terms

t² = 169 - 144

subtract the values

t² = 25

Find the square root

t = 5

Learn about trigonometric identities at: https://brainly.com/question/7331447

#SPJ1

The 80 % confidence interval for the true mean yield and the critical value that should be used in constructing the confidence interval will be 1.886.

From the information, a random sample of 3 fields of rye has a mean yield of 33.1 bushels per acre and standard deviation of 9.91 bushels per acre.

Based on the calculation, the critical value =1.886, lower endpoint =22.3 , upper endpoint =43.9. Check the attachment.

Learn more about critical value on

https://brainly.com/question/14040224

#SPJ1

Alexander can conclude that the inconstancy (spread) of the information in one dataset is twice as much as the changeability of the information within the other dataset.

The mean absolute deviation (MAD) could be a degree of inconstancy that depicts the normal separation between each information point and the cruelty of the dataset. The bigger the Frantic esteem, the more spread out the information is. The proportion of the implies to MADs of two datasets can be utilized to compare their spread.

In this case, the proportion of implies to MADs is 2.1. This implies that the cruelty of one dataset is 2.1 times bigger than the Frantic of that dataset, whereas the cruelty of the other dataset is as if it were 1 times bigger than its Frantic. Hence, the dataset with the bigger proportion (2.1) encompasses a bigger spread (inconstancy) compared to the other dataset.

To learn about mean absolute deviation visit:

https://brainly.com/question/10528201

#SPJ4

The volume of the triangular pyramid is 576 unit³.

We know the volume of a Triangular pyramid is

V = (1/3) x B x h

So, Base Area

= 1/2 x b x h

= 1/2 x 12 x 18

= 12 x 9

= 108 square unit

Now, the Triangular pyramid

= 1/3 x Base area x height

= 1/3 x 108 x 16

= 36 x16

= 576 unit³

Learn more about Volume here:

brainly.com/question/28338582

#SPJ1

The probability equation for the situation is:

The probability that Letitia gets an A on her math test, P(A) is 0.45

The probability that Letitia studied given that she earned an A is 0.89

The probability equation for this situation is given as follows:

where:

The value of P (A) is given by the formula:

Substituting the values;

P(A) = 0.8 * 0.5 + 0.1 * 0.5

P(A) = 0.45

Hence, the probability equation for the situation will be:

P(study | A) = 0.8 * 0.5 / 0.45

b. The probability that Letitia gets an A on her math test is P(A)

P(A) = 0.45

c. The probability that Letitia studied given that she earned an A is given by the formula below:

Putting in the values

P(study | A) = 0.8 * 0.5 / 0.45

P(study | A) = 0.89 or approximately 89%

Learn more about probability at: v

#SPJ1

Answer:

Step-by-step explanation: can you possibly be more specific please.

Answer:

What do you need help with?

Step-by-step explanation:

give further info.

r u okay? or is it a math problem

The value of fraction which is equal to 2/-7 are,

⇒ - 4/14, - 6/21, - 8/28, ..

We know that;

A fraction is a part of whole number, and a way to split up a number into equal parts. Or, A number which is expressed as a quotient is called fraction. It can be written as the form of p : q, which is equivalent to p / q.

Given that;

The fraction is,

⇒ 2/- 7

Now, We can find all the fractions which is equal to 2/-7 as,

⇒ 2/- 7 = - 2/7

           =  - 4/14,

⇒ - 2/7 = - 6/21,

⇒ - 2/7 =  - 8/28,

Thus, the value of fraction which is equal to 2/-7 are,

⇒ - 4/14, - 6/21, - 8/28, ..

Learn more about the fraction visit:

https://brainly.com/question/5454147

#SPJ1

Answer:

Step-by-step explanation:

2 would have a greater b value because its x.  Also the other answer is 2.

For the first scenario where there are no further restrictions, we have 26 capital letters and 10 digits to choose from for each of the 7 characters. Therefore, the total number of possible license plates is:

(26+10) x (25+9) x (24+8) x (23+7) x (22+6) x (21+5) x (20+4) = 18,994,040,000

For the second scenario where the first 3 characters are letters and the last 4 are numbers, we have 26 choices for the first character, 25 choices for the second character, and 24 choices for the third character. For the last 4 characters, we have 10 choices for the first and third characters (since they must be numbers) and 26 choices for the second and fourth characters (since they must be letters). Therefore, the total number of possible license plates is:

26 x 25 x 24 x 10 x 26 x 10 x 26 = 45,697,920,000

For the third scenario where letters and numbers alternate, we have 26 choices for the first letter and 10 choices for the first number. For the remaining 5 characters, we have 25 choices for the letters and 9 choices for the numbers (since we cannot repeat the previous character). Therefore, the total number of possible license plates is:

26 x 10 x 25 x 9 x 25 x 9 x 25 = 45,562,500,000

To learn more about characters : brainly.com/question/13141964

#SPJ11

a) we can be 99% confident that the true mean tread wear index for tires produced by this manufacturer under this brand name is between 172.4 and 210.2., b) The answer is A., c) The answer is B.

a. To construct a 99% confidence interval estimate of the population mean tread wear index, we need to use the formula:

CI = x ± zα/2 * (σ/√n)

where x is the sample mean (191.3), zα/2 is the z-score corresponding to the desired confidence level (99% in this case, which is 2.576), σ is the population standard deviation (unknown in this case, so we use the sample standard deviation of 21.1 as an estimate), and n is the sample size (20). Plugging in the values, we get:

CI = 191.3 ± 2.576 * (21.1/√20) = (172.4, 210.2)

Therefore, we can be 99% confident that the true mean tread wear index for tires produced by this manufacturer under this brand name is between 172.4 and 210.2.

b. The answer is A. No, because a grade of 200 is not in the interval. Since the confidence interval does not include the claimed value of 200, the consumer organization cannot accuse the manufacturer of producing tires that do not meet the performance information on the sidewall of the tire based on this sample alone.

c. The answer is B. It is not unusual because it is just outside of the confidence interval. The confidence interval developed in part (a) only provides a range of values that we are 99% confident the population mean falls within. It does not mean that all individual observations within or outside the interval are unusual. In fact, there is still a small probability (1% in this case) that an individual observation could fall outside the interval by chance. As long as the observed tread wear index is not too far outside the interval, it is still plausible that it could be a representative value from the population. In this case, an observed value of 205 is only slightly above the upper bound of the confidence interval, so it is not unusual.

a. To construct a 99% confidence interval estimate of the population mean tread wear index, we can use the following formula:

CI = x ± (t * (s / √n))

Where CI is the confidence interval, x is the sample mean, t is the t-value for the desired confidence level (99% in this case), s is the sample standard deviation, and n is the sample size.

Using the given data, we have:
x = 191.3
s = 21.1
n = 20

For a 99% confidence level and a sample size of 19 degrees of freedom (n-1), the t-value is approximately 2.861.

Now, we can calculate the confidence interval:
CI = 191.3 ± (2.861 * (21.1 / √20))
CI = 191.3 ± (2.861 * 4.718)
CI = 191.3 ± 13.5
CI = (177.8, 204.8)

b. Based on the confidence interval (177.8, 204.8), we can see that the grade of 200 is within the interval. Therefore, the consumer organization should not accuse the manufacturer of producing tires that do not meet the performance information on the sidewall of the tire. The correct answer is C: No, because a grade of 200 is in the interval.

c. An observed tread wear index of 205 for a particular tire is not unusual even though it is outside the confidence interval developed in (a) because the confidence interval only estimates the population mean tread wear index. Individual tire tread wear indexes can vary from the mean, and 205 is just slightly outside of the confidence interval. The correct answer is B: It is not unusual because it is just outside of the confidence interval.

Learn more about confidence interval at: brainly.com/question/24131141

#SPJ11

By taking the quotient between the sizes, we can see that Company A's pepper grains are 3.0*10^2 times larger.

We know that Company A sells peppers that is ground to a thickness of 2.4x10^-2 inches. Company B makes a smaller sized pepper ground to a thickness of 8.0x10^-5 inches.

To compare the sizes, we need to take the quotient between the size for company A and the size for company B, we will get:

(2.4x10^-2 in)/(8.0x10^-5 in)

(2.4/8.0)*(10^-2/10^-5)

0.3*(10^(-2 + 5))

0.3*10^3

To use the proper scientific notation, there must be a digit in the left side of the decimal point, so we can write this as:

3.0*10^2

Learn more about quotients:

https://brainly.com/question/629998

#SPJ1

The combinations that satisfy the conditions for inference are c. n = 50 and p-hat = 0.17 and d. n = 75 and p-hat= 0.15.

To determine which combination of n and p-hat will satisfy the conditions for inference, we need to check if the sample size is sufficiently large and if the sample proportion is not too close to 0 or 1.

We can use the following formulas to check the conditions:

Sample size: np-hat >= 10 and n(1-p-hat) >= 10

Sample proportion: 0 < p-hat < 1

a. n = 15 and p-hat = 0.6

np-hat = 150.6 = 9 and n*(1-p-hat) = 15*0.4 = 6

Both conditions are not satisfied. This combination does not work.

b. n=25 and p-hat = 0.35

np-hat = 250.35 = 8.75 and n*(1-p-hat) = 25*0.65 = 16.25

Both conditions are not satisfied. This combination does not work.

c. n = 50 and p-hat = 0.17

np-hat = 500.17 = 8.5 and n*(1-p-hat) = 50*0.83 = 41.5

Both conditions are satisfied. This combination works.

d. n = 75 and p-hat= 0.15

np-hat = 750.15 = 11.25 and n*(1-p-hat) = 75*0.85 = 63.75

Both conditions are satisfied. This combination works.

e. n = 100 and p-hat = 0.91

np-hat = 1000.91 = 91 and n*(1-p-hat) = 100*0.09 = 9

The second condition is not satisfied. This combination does not work.

Therefore, the combinations that satisfy the conditions for inference are c. n = 50 and p-hat = 0.17 and d. n = 75 and p-hat= 0.15.

To learn more about combination visit:

https://brainly.com/question/19692242

#SPJ11

The values of the angles and sides of the given right angle triangle are:

1) sin Q = 9/13

2) AB = 10

The common three trigonometric ratios in a right angle triangle are:

sin x = opposite/hypotenuse

cos x = adjacent/hypotenuse

tan x = opposite/adjacent

1) To find sin Q from the triangle, we have:

sin Q = pPR/PQ

sin Q = 9/15

2) Using Pythagoras theorem, we can find side AB as:

AB = √(6² + 8²)

AB = √100

AB = 10

Read more about Trigonometric ratios at: https://brainly.com/question/13276558

#SPJ1

False.

If rank(A) = 4 in a 5 by 5 matrix A, it means that the column space of A has dimension 4. In other words, the columns of A span a subspace of dimension 4 in R^5.

In linear algebra, the rank of a matrix A is the dimension of the column space of A, which is the subspace of R^n spanned by the columns of A. The column space of A is a subspace of R^n, so its dimension can be at most n. Therefore, if rank(A) = n, then the columns of A form a basis of R^n, which means that they span the entire space R^n and are linearly independent.

In the case where rank(A) < n, the columns of A do not span the entire space R^n, which means that they cannot form a basis of R^n. Instead, they span a subspace of R^n of dimension equal to the rank of A. This subspace can be thought of as a "shadow" of R^n that is cast by the columns of A.

In the specific case of a 5 by 5 matrix A with rank(A) = 4, the columns of A span a subspace of dimension 4 in R^5. This means that the columns of A cannot span the entire space R^5, since their dimension is less than 5. Therefore, the columns of A cannot form a basis of R^5. However, they do span a subspace of R^5 of dimension 4, and this subspace is an important object of study in linear algebra.

Visit to know more about Matrix:-

brainly.com/question/30218994

#SPJ11

Answer: 26

Step-by-step explanation:

There are 4 common factors of 26 and 52, that are 1, 2, 26, and 13. Therefore, the greatest common factor of 26 and 52 is 26.