Answer:
B. The reactants will react to produce more H₂O
Explanation:
Given the reaction
2H₂+O₂→2H₂O
A decrease in the amount of H₂O will cause the reaction to produce more H₂O. When you change something, the reaction seeks to undo that change.
What did Dalton compare atoms to?
A. Wood
B. Jacks
C. Marbles
D. Leaves
Explanation:
the answer is C marbles hope you find it helpful
What molecules can cells break down for energy?
The options
A. Very small gas molecules, like carbon dioxide.
B. Large molecules made from glucose, like starch.
C. Small sugars, like glucose.
D. Very small liquid molecules, like water.
Answer: I think the answer is C)
Explanation:
I need this like NOW
An area on the map where we might see strong winds is:
Question 5 options:
near Maine
near California
near Washington D.C.
near Kansas City
What is the pressure (in atm) in a 5.00 L tank with 9.00 grams of oxygen gas at 350 K?
Answer:
1.61 atm
Explanation:
Using general gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
From the information provided in this question,
V = 5.00L
T = 350K
mass of O2 = 9.00g
Using mole = mass/molar mass
Molar mass of O2 = 16(2) = 32g/mol
mole = 9/32
mole = 0.28mol
Using PV = nRT
P = nRT/V
P = 0.28 × 0.0821 × 350/5
P = 8.0458/5
P = 1.609
Pressure = 1.61 atm
The pressure of the oxygen gas at the given temperature and volume is 1.61 atm.
The given parameters;
volume of the gas, V = 5 Lmass of the oxygen gas, m = 9 gtemperature of the gas, T = 350 KThe number of the moles of the given gas is calculated as follows;
[tex]moles = \frac{m}{M} \\\\moles = \frac{9}{32} \\\\moles = 0.28 \ mol[/tex]
The pressure of the gas is calculated as follows;
[tex]PV = nRT\\\\P = \frac{nRT}{V} \\\\P = \frac{0.28 \times 0.0821 \times 350}{5} \\\\P = 1.61 \ atm[/tex]
Thus, the pressure of the oxygen gas at the given temperature and volume is 1.61 atm.
Learn more here:https://brainly.com/question/21912477
To be considered a true mineral,
what state of matter must be
present?
why does a mole of silicon weigh a different amount than a mole of carbon?
Answer:
[tex]\boxed {\boxed {\sf Different \ amount \ of \ protons, neutrons, \ and \ electrons}}[/tex]
Explanation:
Remember that a mole is equal to Avogadro's number: 6.022*10²³ atoms. Also, remember that an atom is made up of protons, neutrons, and electrons. Each element has a different amount of each.
If an element has more of these particles in 1 atom, then the atomic mass will be greater, ultimately making the molar mass (mass of 1 mole) greater.
Silicon has 14 protons, electrons, and neutrons, making its atomic mass 28.085 amu and its molar mass 28.085 grams. However, carbon only has 6 of each particle, so its atomic mass is smaller at 12.011 amu and molar mass is 12.011 grams.
In the following reaction:
C6H6 + Br2 → C6H5Br + HBr
Assume 1.25 moles of C6H6 react with sufficient bromine, how many moles of C6H5Br should form?
2.50 mol
5.00 mol
0.625 mol
1.25 mol
Answer:
1.25mol
Explanation:
The equation you gave is balanced and everything is in a 1:1:1:1 ratio. Because there is excess bromine, the reaction can proceed until completion which will give you 1.25 mol C6H5Br
Gallium (Ga, 69.723 g/mol) is a metalloid obtained from its salts during the smelting of ores of other elements, like Zinc. has broad applicability in the electronics industry. It is also used as a safe replacement for mercury in thermometers as it melts at 29.8 °C and has a heat of fusion of 5.59 kJ/mol. What is the entropy change of 22 g of gallium in J/K as it melts when placed on a surface at 29.8°C?
Answer:
4.255 J/ K
Explanation:
Given data :
mass of Gallium = 16 gm
molar mass = 69.723 g/mol
hence no of moles = 16 / 69.723 = 0.23 moles --------- ( 1 )
Δh ( heat fusion ) = 5.59 KJ/mol
Temperature = 29.8°C = 302.8 k
Determine the entropy change of gallium
Δs ( entropy change ) = heat fusion / temperature
= ( 5.59 * 1000) J/mol / 302.8 = 18.46 J/k*mol
Hence entropy change of gallium
= Δs * no of Gallium moles
= 18.46 * 0.23 = 4.255 J/ k
I hope this is right haha
How many grams of NaOH (MW = 40.0) are there in 500.0 mL
of a 0.175 M NaOH solution?
A) 3.50
B) 114
C) 14.0
D) 2.19x10
Answer:
3.5
Explanation:
500*0.175= 8.75 *40/1000=3500/1000=3.5
Answer:
3.50 grams
Explanation:
Mastering chem
Consider this chemical equation:
2AgNO3(aq) + Cu(s) → Cu(NO3)2(aq) + 2Ag(s)
Which substances dissolve in solution? Select all
that apply.
AgNO3
Cu
Cu(NO3)2
Ag
Answer is:AgNO3 and Cu(NO3)2
Answer:
the answer is very correct as AgNO3 and Cu(NO3)2
Answer:
A,C
Explanation:
the person above me is correct
aluminium extraction from its ore
what is meant by chemical combination? what are the laws of chemical combination?
Answer:
In simple terms, this law states that matter can neither be created nor destroyed. In other words, the total mass, that is, the sum of the mass of reacting mixture and the products formed remains constant.
Explanation:
please give me brain list and follow
16. What is the typical diameter of an atom?
A. | 10-14 m
B. I x 10-12 m
C. | 10-10 m
D. | x 10-8 m
HELPP PLSS
Conduction is the transfer of energy by the movement of currents. ture or false
conduction is the transfer of energy by the movement of currents(it is true)
Answer:
false
Explanation: Its actually Convection
How many moles of titanium are in a sample containing 2.8 x 10^24 atoms?
1) 1.69 x 10^48
2) 4.65 x 10^43
3) 4.65
4) 0.0465
5) 48
Answer:
4.65 moles
Explanation:
To calculate this, we can use Avogradro's Number: 6.022*10^23
[tex]2.8*10^2^4*\frac{1mole}{6.022*10^2^3} =4.65mol[/tex]
So, there are 4.65 moles in 2.8*10^24 atoms of Ti
Which best describes why animals need the energy in food?
A for growth and body repair
B for transpiration and growth
C for body repair and photosynthesis
D for cell reproduction and transpiration
Answer:
A for growth and body repair
Explanation:
B, C, and D don't have anything to do with animals.
how many hydrogen molecules are there in 1 ton of hydrogen?
Considering the definition of mass molar and Avogadro's Number, there are 3.0115×10²⁹ molecules in 1 ton of hydrogen.
First, the molar mass of hydrogen H₂, that is, the amount of mass that a substance contains in one mole, is 2 g/mole.
In this case, being 1 ton = 1,000,000 grams, the number of moles that 1 ton of hydrogen contains is calculated as:
[tex]1,000,000 gramsx\frac{1 mole}{2 grams} = 500,000 moles[/tex]
On the other hand, Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Then, the number of molecules that 500,000 moles of hydrogen contains is calculated as:
[tex]500,000 molesx\frac{6.023x10^{23} molecules }{1 mole}[/tex]= 3.0115×10²⁹ molecules
Finally, there are 3.0115×10²⁹ molecules in 1 ton of hydrogen.
Learn more about:
mass molar: https://brainly.com/question/12695086?referrer=searchResultsAvogadro's Number: brainly.com/question/11907018?referrer=searchResults brainly.com/question/1445383?referrer=searchResults brainly.com/question/1528951?referrer=searchResultsHelp guys
Please
Please help me if u know
When aqueous ammonia is added to a solution containing Bi3+ and Cu2+ cations, ____________ occurs. A. Reduction to black bismuth metal.B. Precipitation of a black bismuth hydroxide.C. Precipitation of white bismuth hydroxide. D. Formation of a red-brown precipitate of Cu2[Fe(CN)6].
Answer:
C. Precipitation of white bismuth hydroxide.
Explanation:
When aqueous ammonia is added to a solution that has Bi3+ and CU2+ cations, what we would have as a chemical result is the precipitation of white Bismuth hydroxide.
The chemical reaction for this can be written as,
Bi3+ + 2NH3 + 3H2O ⇌ Bi(OH)3(s) + 3NH4
Thank you!
What layer of the Sun is the location for nuclear fusion?
A rigid container of O 2 has a pressure of 340 kPa at a temperature of 713 K. What is the pressure at 273°C ?
Answer:
260 kPa
Explanation:
To answer this problem we can use Gay-Lussac's law, which states that at a constant volume (such as is the case with a rigid container):
P₁T₂=P₂T₁Where in this case:
P₁ = 340 kPaT₂ = 273 °C ⇒ 273 + 273.16 = 546 KP₂ = ?T₁ = 713 KWe input the data:
340 kPa * 546 K = P₂ * 713 KAnd solve for P₂:
P₂ = 260 kPaA student pours 800.0 mL of a 3.000 molar solution of sodium hydroxide into a 2.00 liter volumetric flask and fills the flask up with water. What is the new molarity of the solution?
5 points
12.00 M
1.20 M
14.00 M
0.0750 M
Look at the diagram below.
Ray 1 from the Sun moves through air and falls on the surface of a lake. Ray 2 is a ray which travels from the surface of the lake at the point Ray 1 strikes the lake, and moves towards air. Ray 1 and Ray 2 make the same angle with the surface of the lake. Ray 1 bends towards the vertical when it enters the lake as Ray 3
Which statement is true?
Ray 2 is the refracted ray.
Ray 3 is the reflected ray.
Ray 1 and Ray 2 make the same angle with the vertical line.
Ray 1 and Ray 3 make the same angle with the vertical line.
Answer:
3rd statment
Explanation:
ray 1 and 2 are same vertical line
Answer: C: Ray 1 and Ray 2 make the same angle with the vertical line.
Explanation:
2 moles KCl + 3 moles O2 → 2moles KCIO3
Calculate the number of particles of each substance based on the number of moles from the balanced equation
Answer:
KCl ⇒ 1.205x10²⁴ molecules
O₂ ⇒ 1.807x10²⁴ molecules
KClO₃ ⇒ 1.205x10²⁴ molecules
Explanation:
In order to calculate the number of particles from the number of moles, we have to use Avogadro's number, which states the number of particles in one mol:
In 1 mol there are 6.023x10²³ particles (ions, molecules or atoms).So now we multiply the number of moles of each substance by Avogadro's number:
KCl ⇒ 2 mol * 6.023x10²³ molecules/mol = 1.205x10²⁴ moleculesO₂ ⇒ 3 mol * 6.023x10²³ molecules/mol = 1.807x10²⁴ moleculesKClO₃ ⇒ 2 mol * 6.023x10²³ molecules/mol = 1.205x10²⁴ moleculesJanet runs 6.4 miles in one hour. Is it speed or velocity or acceleration
Answer:
acceleration
Explanation:
2. Write the symbol proposed by Dalton for silver, sulphur. oxygen and gold.
Answer:
check the pdf hope it helps :)
Explanation:
Based on the procedure, which of the following are reasonable sources of errors in determining heat lost or gained? One or more answers are correct and you will receive negative points for incorrect answers. Group of answer choices The cap of the calorimeter was not closed immediately after mixing. The final temperature was measured before the temperature stopped changing. Temperatures were not measured right before mixing. Volumes of solutions were not measured accurately.
Answer:
The possible source of errors as regard the Procedure are:
The final temperature was measured before the temperature stopped changing The cap of the calorimeter was not closed immediately after mixing temperatures where not measured right before mixingExplanation:
The procedure referred to should a experiment with regards heat
The possible source of errors as regards the Procedure are:
The final temperature was measured before the temperature stopped changing The cap of the calorimeter was not closed immediately after mixing temperatures where not measured right before mixingHow many moles are there in 8.0 grams of CaCO3
Answer: moles = 0.0799305403604264
Explanation:
an unknown sample with a mass of 50.0 grams changes from an initial temperature of 22.5°C to a final temperature of 32.4°C. It is known that the sample absorbed 444 J and f heat l. Bases on this information, what substance in the table is most likely the identity of this sample?
Answer:
Aluminum
Explanation:
How is this effect of dissolved
substances important in nature?
Explanation:
Water is called the "universal solvent" because it is capable of dissolving more substances than any other liquid. This is important to every living thing on earth. It means that wherever water goes, either through the air, the ground, or through our bodies, it takes along valuable chemicals, minerals, and nutrients.