if LiCl and MgBr2 were to enter into a chemical reaction which member of MgBr2 will chlorine replace?

Answer:

C₁₇H₂₀N₄O₆

Explanation:

First, we need to determine the percentage of the atoms in the molecule. Then, assuming a basis of 100 we must convert the mass of each atom to moles. Simplest formula is the simplest ratio of atoms presents in the molecule:

%C:

19.88g CO2 * (12.01g/mol C / 44.01g/mol CO2) = 5.425g C

5.425g C / 10.0g * 100 = 54.25% C

%H:

4.79g H2O * (2*1.01g/mol / 18.015g/mol) = 0.537g H

0.537g H / 10.0g * 100 = 5.37%

%N:

14.89%

%O:

100 - 14.89% - 54.25% - 5.37% = 25.49%

Moles of each atom in a basis of 100g:

C: 54.25g * (1mol / 12.01g) = 4.517moles

H: 5.37g * (1mol / 1.01g) = 5.317 moles

N: 14.89g * (1mol / 14.01g) = 1.063 moles

O: 25.49g * (1mol / 16g) = 1.593 moles

Dividing each amount of moles in the lower number of moles (moles N):

C = 4.517mol / 1.063mol = 4.25

H = 5.317mol / 1.063mol = 5

N = 1.063mol / 1.063mol = 1

O = 1.593mol / 1.063mol = 1.5

This ratio multiplied 4 times to obtain whole-numbers:

C = 4.25*4 = 17

H = 5*4 = 20

N = 1*4 = 4

O = 1.5*4 = 6

The simplest formula for vitamin B6 is:

Answer:

a) 24.7 mol

b) 790 g

Explanation:

Step 1: Given data

Step 2: Convert "T" to Kelvin

We will use the following expression.

K = °C + 273.15

K = 23°C + 273.15 = 296 K

Step 3: Calculate the moles (n) of oxygen

We will use the ideal gas equation.

P × V = n × R × T

n = P × V/R × T

n = 3.00 atm × 200. L/(0.0821 atm.L/mol.K) × 296 K = 24.7 mol

Step 4: Calculate the mass (m) corresponding to 24.7 moles of oxygen

The molar mass (M) of oxygen ga sis 32.00 g/mol. We will calculate the mass of oxygen using the following expression.

m = n × M

m = 24.7 mol × 32.00 g/mol = 790 g

Answer:

Explanation:

Using the dilution formula to determine the final concentration of NaCl in the protein sample.

[tex]M_1V_1 = M_2V_2[/tex]

[tex]600 \ mM \times 1 \ mL= M_2 \times ( 1000\ mL + 1 \ mL)[/tex]

[tex]M_2= \dfrac{600 \ mM \times 1 \ mL}{ ( 1001\ mL)}[/tex]

[tex]M_2= 0.599 \ mM[/tex]

However, when dialysis attains equilibrium, it implies that the sample was dialyzed twice, SO:

[tex]M_2 = \dfrac{600 \ mM\times 1 \ mL}{201 \ mL} = 2.97 \ mM[/tex]

Now, take the concentration as 2.97 mM

Then:

[tex]M_f = \dfrac{2.985 mM \times 1 mL}{201 \ mL}[/tex]

[tex]M_f = 0.01485 \ mM[/tex]

[NaCl] = 0.01485 mM

Answer:

B

Explanation:

Answer:

a) final pressure inside the tank is 242.4 atm

b)

Work = 0

heat q = 1440.85 kJ

DU = 1440.85 kJ

Explanation:

Given that;

Pressure P1 = 172 atm

Volume V = 80 L

Temperature T1 = 20°C = ( 273.15 + 20) = 293.15 K

Temperature T2 = 140°C = ( 273.15 + 140) = 413.15 K

we know that, gas constant R = 0.0821 atm.L/mol.K

from the Ideal Gas equation;

pV = nRT1

n = pV/RT1

we substitute

n = (172 × 80) / (0.0821 × 293.15)

n = 13760 / 24.067615  

n = 571.72 moles

now

P2 = nRT2/V2

P2 = (571.72 × 0.0821 × 413.15) / 80

P2 = 19392.5222 / 80

P2 = 242.4 atm

Therefore, final pressure inside the tank is 242.4 atm

b)

we know

w = -∫[tex]P_{ext}[/tex] dv

now, since there is no change in volume; dv = 0

so

w = 0

Work = 0

dU = cVDT

Cv = nCr,m

Cv = 571.72 ×  21.0

Cv = 12007.12 J/k

DU = CvΔT

DU = 12007.12 × (413.15 - 293.15)

DU = 1440854.4 J

DU = 1440.85 kJ

DU = q + w

1440.85 = q + 0

heat q = 1440.85 kJ

Answer:

The rate of disappearance of C₂H₆O = 2.46 mol/min

Explanation:

The equation of the reaction is given below:

2 K₂Cr₂O₇ + 8 H₂SO₄ + 3 C₂H₆O → 2 Cr₂(SO₄)₃ + 2 K₂SO₄ + 11 H₂O

From the equation of the reaction, 3 moles of C₂H₆O is used when 2 moles of Cr₂(SO₄)₃ are produced, therefore, the mole ratio of C₂H₆O to Cr₂(SO₄)₃ is 3:2.

The rate of appearance of Cr₂(SO₄)₃ in that particular moment is given 1.64 mol/min. This would than means that C₂H₆O must be used up at a rate which is approximately equal to their mole ratios. Thus,  the rate of of the disappearance of C₂H₆O can be calculated from the mole ratio of Cr₂(SO₄)₃ and C₂H₆O.

Rate of disappearance of C₂H₆O = 1.64 mol/min of  Cr₂(SO₄)₃  * 3 moles of C₂H₆O / 2 moles of Cr₂(SO₄)₃

Rate of disappearance of C₂H₆O = 2.46 mol/min of C₂H₆O

Therefore, the rate of disappearance of C₂H₆O = 2.46 mol/min

Answer:

it's an artificial non-saccharide sweetener 200 times sweeter than sucrose, and is commonly used as a sugar substitute in foods and beverages. it's a methyl ester of the aspartic acid/phenylalanine dipeptide with the trade names NutraSweet, Equal, and Canderel

Explanation:

Answer:

Aspartame is some type of very sweet substance that is used as an artificial sweetener, and chiefly in low-calorie products. It is a derivative of aspartic acid and phenylalanine.

Explanation:

Answer:

Their must be a picture with this question so we can answer it

Explanation:

According to octet rule  the bonded valence shells are completely filled. All the compounds except the first one, CH₃CH₃O is invalid since H does not obey the rule and invalid.

Octet rule says that an atoms become stable when it completes its valence shell to 8 electrons or 2 electrons for K-shell. Thus bonded shells have to completely filled to be stable.

Each atom shares its electrons based on its valency. For example carbon have a valency of 4 and it forms for bonds and oxygen and sulfur have two and hydrogen forms only one bonds.

In the first compounds CH₃CH₃O, where one H forms two bonds which is not possible and invalid.

In the second compound CONH, all the atoms satisfies its valency including nitrogen having a valency of three forms  three bonds. Similarly in CH₂F₂, one fluorine forms one bond and the structure is valid.

In the case of Br₂ , each bromine shares one electron with the other and complete their octet to eight electrons. In NH₃, SCO and COCl₂ all the atoms satisfies their valency and the structures are valid.

Therefore the only invalid structure is first compound, remaining all are valid.

To find more about octet rule, refer the link below:

https://brainly.com/question/11657564

#SPJ2

Your question is incomplete. But most probably your complete question was as in the uploaded image.

Answer:

The cycling of matter is important to many Earth processes and to the survival of organisms the existing matter must cycle continuously for this planet to support life Water, carbon, nitrogen, phosphorus, and even rocks move through cycles If these materials did not cycle, Earth could not support life.

Explanation:

Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

Rocks, as well as water, carbon, nitrogen, and phosphorus, go through cycles. The planet Earth could not support life if these materials did not cycle.

Subsystems exist within the Earth system. These subsystems include the exosphere, atmosphere, hydrosphere, lithosphere and geosphere, also referred to as the lithosphere, and the living environment (biosphere).

These systems are powered by energy that comes from both the Sun and the interior of the Earth. Through processes known as biogeochemical cycles, nutrients and elements also move through these systems along with energy.

Therefore,  Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

To learn more about Earth, refer to the link:

https://brainly.com/question/1204146

#SPJ6

Answer:

The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.

Explanation:

Answer:

A) 2

Explanation:

Answer:

2, i got it right thanks to the other user :) <3

Explanation:

Answer:

B. The temperature of the water when the food sample has finished burning completely.

Explanation:

Heat or thermal energy is a form of energy that transfers from one object to another due to a temperature difference between the objects. The units for heat are joules or calories.

Calorimetry is the measurement of heat energy released or absorbed in a chemical  reaction. A calorimeter is used in calorimetry. The calorimeter operates on the Law of Conservation of Energy which states that energy is never created or destroyed but is transformed from one form to another or between objects.

In food calorimetry, the energy released when food is burned is measured by recording the rise in temperature of water in a calorimeter when a given mass of a food sample is burned completely.

Energy can be calculated using the formula: Q = mc ∆T

where Q = the energy in joules or calories, m = the mass in grams, c = specific heat and ∆T = the change in temperature (final temperature - initial temperature).

The temperature of the water when the food sample has finished burning completely is taken as the final temperature of the water. The sample is allowed to smolder for sometime before recording the final  water temperature. This is because the water temperature will continue to rise after the  flame has gone out.

Answer:

257 mL

Explanation:

Step 1: Given data

Step 2: Calculate the moles (n) corresponding to 32.8 g of HCl

The molar mass of HCl is 36.46 g/mol.

32.8 g × 1 mol/36.46 g = 0.900 mol

Step 3: Calculate the volume (V) of solution required

We will use the following expression.

C = n/V

V = n/C

V = 0.900 mol/(3.50 mol/L)

V = 0.257 L = 257 mL

Answer:

Nucleus 3 i believe

Answer:

226.8 mg of mupirocin powder are required

Explanation:

Given that;

weight of standard pack = 22 g

mupirocin by weight = 2%

so weight of mupirocin = 2% × 22 = 2/100 × 22 = 0.44 g

so by adding the needed quantity of mupirocin powder to prepare a 3% w/w mupirocin ointment

mg of mupirocin powder are required = ?, lets rep this with x

Total weight of ointment = 22 + x g

Amount of mupirocin  = 0.44 + x g

percentage of mupirocin  in ointment is 3?

so

3/100 = 0.44 + x g / 22 + x g

3( 22 + x g ) = 100( 0.44 + x g )

66 + 3x g = 44 + 100x g

66 - 44 = 100x g - 3x g

97 x g = 22

x g = 22 / 97

x g = 0.2268 g

we know that; 1 gram = 1000 Milligram

so 0.2268 g = x mg

x mg = 0.2268 × 1000

x mg  = 226.8 mg

Therefore, 226.8 mg of mupirocin powder are required

We have that for the Question "How many mg of mupirocin powder are required? "

It can be said that

From the question we are told

a pharmacist is asked to prepare a modification of a standard 22g package of a 2% mupirocin ointment by adding the needed quantity of mupirocin powder to prepare a 3% w/w mupirocin ointment

Weight of standard package = 22g

mupirocin = 2%

Therefore,

Weight of mupirocin = [tex]\frac{2}{100}*22[/tex]

[tex]=0.44g[/tex]

Let amount of mupirocin to be added to prepare 3% w/w mupirocin ointment = X

Therefore,

Total weight of ointment = [tex](22 + X)g[/tex]

amount of mupirocin = [tex](0.44+X)g[/tex]

% of mupirocin in ointment = [tex]3\%[/tex]

therefore,

[tex]\frac{3}{100} = \frac{0.44+X}{22+X}\\\\66+3X = 44+100X\\\\X = 0.2268g[/tex]

For more information on this visit

https://brainly.com/question/17756498

Answer:

Zero

Explanation:

The complete reaction for this is as follows -

HBr + NaOH = NaBr + H2O

1 mole of NaOH reacts with 1 mole of HBr

m(HBr) = 57.4g and M(HBr) = 80.9g/mol

m(NaOH) = 16g and M(NaOH) = 40g/mol

Number of moles = m/M

Substituting the given values we get -

n(HBr) = 57.4 g/80.9 g/mol = 0.709

n(NaOH) = 16 g/40 g/mol = 0.4

n(H2O) = n(NaOH) = 0.40 mol

According to balanced equation

40 gram of NaOH reacts with 81 grams of HBr

41 gram of NaOH will react with 81/40 * 41 = 83.025 gram of HBr

We have only 57.4 g of HBr only hence, 0 HBr will be left.

Answer: The density of this nugget is [tex]7\text{ g cm}^{-3}[/tex] .

Explanation:

We are given that,

Mass of nugget = 63 g

Volume = [tex]9\ cm^3[/tex]

The computation of density of a substance is given by :-

[tex]\text{Density}=\dfrac{\text{Mass}}{\text{Volume}}\\\\\Rightarrow\ \text{Density}=\dfrac{63}{9}\text{ g cm}^{-3}[/tex]

[tex]\Rightarrow\ \text{Density =}7\text{ g cm}^{-3}[/tex]

Therefore, the density of this nugget is [tex]7\text{ g cm}^{-3}[/tex] .

Answer:

A two energy levels K and L

B halogen are present in group 17

C in same group elements have same valence electrons

Explanation:

Answer:

predator

Explanation:

Wolves, arctic foxes, and snowy owls are predators in the tundra.

Answer:

Yes, in both cases the reactant bond must be broken before the H can bond.

Explanation:

Let us remind ourselves of the basics of the collision theory. According to this theory, chemical reaction occurs because of the collision of particles of substances in a chemical reaction system.

This means that the bond between reactants must first be broken and new bonds formed in products. Activation energy is the minimum energy required for a reaction to occur. This energy goes into the rearrangement of reactant bonds to enable them to recombine and form products.

Since the N2 bond energy is far higher than the I2 bond energy, a greater degree of energy is needed overcome the energy barrier in the reaction of H2 with N2 compared to the reaction of H2 and I2 . Therefore, the activation energy for the reaction of H2 and N2 is much higher than the activation energy for the reaction of H2 with I2.

Answer:

K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷

Explanation:

The equation for the reaction is given below:

7CH₄(g) + 8N₂(g) +2O₂(g) + 17H₂O(g) + 7K₂CO₃(s) —> 16NH₃(g) + 14KHCO₃(s)

Equilibrium constant (K) =..?

Equilibrium constant, K for a reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Thus, the equilibrium expression for the Harber-Bosch process for the synthesis of ammonia can be written as shown below:

K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷

Answer:

False

Explanation:

Chemists make a distinction between two different types of changes that they study—physical changes and chemical changes. Physical changes are changes that do not alter the identity of a substance. Chemical changes are frequently harder to reverse than physical changes.

Answer:

7.23m/s²

Explanation:

Given parameters:

Initial velocity  = 0m/s

Final velocity  = 60m/s

Time taken  = 8.3s

Unknown:

Acceleration of the dragsters = ?

Solution:

Acceleration is defined as the rate of change of velocity with time taken.

So;

    Acceleration  = [tex]\frac{Final velocity - Initial velocity }{time}[/tex]  

Acceleration  = [tex]\frac{60 - 0}{8.3 }[/tex]    = 7.23m/s²

Answer:

The sun will appear to rise and set more slowly

have a nice day! (^o^)

Answer:

All employees should know how to work the system

Answer:

The property P measured, was a chemical property of X; its acidity

The property D measured, was a physical property of X; its density

The property V measured, was a physical property of X; it's viscosity probably.

Explanation:

1. The property V that was measured is the acidity of X. The acidity of X is a measure of the concentration of hydrogen ions present in it. When drops of another solution, containing dissolved sodium hydroxide, are slowly added, and a pH indicator is used to determine when the sodium hydroxide has completely reacted with X, the procedure determines the concentration of X that would neutralize the base, sodium hydroxide.

2. The property of X determined in the step is the density of X, a physical property. First the volume of X was determined by the displacement method. Then the density of X is calculated from its mass and volume.

3. Since during the determination of the property V, there was no alteration done to the chemical constitution of X, the property thus determined is a physical property. Melting of the sample is a physical change and likewise its flow rate through a very thin tube.

Answer:

1.51×10²³ atoms.

Explanation:

From the question given above, the following data were obtained:

Mass of Calcium (Ca = 10 g

Number of atom of Calcium (Ca) =?

The number of atoms present in 10 g of Ca be obtained as follow:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole Ca contains 6.02×10²³ atoms.

1 mole of Ca = 40 g.

Now, if 40 g of Ca contains 6.02×10²³ atoms.

Therefore, 10 g of Ca will contain = (10 × 6.02×10²³) / 40 = 1.51×10²³ atoms.

Thus, 10 g of calcium contains 1.51×10²³ atoms.

Answer:

Explanation:

Weight = mass x gravity

mass given = 85 kg

gravity = 8.87 m /s²

Weight = 85 x 8.87 = 753.95 N .

Weight on Uranus = 753.95 N .

Answer:

Remove some water from the jar before adding the mixture.

Explanation:

She will speed it up when removing some water it will stay dry and not be sticky to separate the two ingredients

Answer: Remove a bit of water from the jar

Explanation: