Answer:
b. 4.6 %
Explanation:
From the question,
E = M.A/V.R................ Equation 1
Where E = percentage Efficiency of the machine, M.A = machanical accurancy of the machine, V.R = Velocity ratio of the machine
Make V.R the subject of the equation
V.R = M.A/E
Given: M.A = 3, E = 65% = 0.65
Substitute this values into equation 2
V.R = 3/0.65
V.R = 4.6
Hence the right option is b. 4.6 $
) A 1.0kW kettle contains 500g of boiling waterCalculate the time needed to evaporate all the water
in the kettle (specific latent heat of vaporization2.26 MJ kg-1
Answer:
t = 1130 s = 18.83 min
Explanation:
First, we will calculate the energy required to evaporate 500 g of water:
[tex]E = mL[/tex]
where,
E = Energy Required for evaporation of water =?
m = mass of water = 500 g = 0.5 kg
L = Latent heat of vaporization of water = 2.26 MJ/kg = 2260 KJ/kg
Therefore,
[tex]E = (0.5\ kg)(2260\ KJ/kg)\\E = 1130\ KJ[/tex]
Now, we will calculate the time required:
[tex]P = \frac{W}{t}\\\\t = \frac{W}{P}[/tex]
where,
t = time = ?
P = Power of kettle = 1 KW
Therefore,
[tex]t = \frac{1130\ KJ}{1 KW}\\\\[/tex]
t = 1130 s = 18.83 min
what is a hydraulic system
Explanation:
Hydraulic systems use the pump to push hydraulic fluid through the system to create fluid power. The fluid passes through the valves and flows to the cylinder where the hydraulic energy converts back into mechanical energy. The valves help to direct the flow of the liquid and relieve pressure when needed
Which food provide the best nutrients
Answer: Foods that naturally are nutrient-rich include fruits and vegetables. Lean meats, fish, whole grains, dairy, legumes, nuts, and seeds also are high in nutrients.
Which person below is likely to have better health?
A. Jenna, who is optimistic about life
B. Albert, who thinks that events in his life are not in his control
C. Peter, who is depressed
D. Claire, who blames everyone else for her circumstances
SUBMIT
Jenna, who is optimistic about life, is likely to have better health. Hence, option (A) is correct.
What is mental health?Mental health affects cognition, perception, and behavior and includes emotional, psychological, and social well-being. It also affects how someone responds to stress, interacts with others, and makes decisions.
Subjective well-being, perceived self-efficacy, autonomy, competence, generational reliance, and self-actualization of one's intellectual and emotional potential are only a few examples of what is considered to be mental health.
The ability to enjoy life and strike a balance between daily activities and endeavors to develop psychological resilience may be considered a sign of mental health from the viewpoints of positive psychology or holistic approaches.
Learn more about mental health here:
https://brainly.com/question/18216607
#SPJ2
A force of 355 N is applied to an object that accelerates at a rate of 7.8 m/sec2 . What is the mass of the object ?
Answer:
A force of 355 N is applied to an object that accelerates at a rate of 7.8 m/sec2 . What is the mass of the object ?
Explanation:
In its elemental state, carbon is available as:
a
Coal
b Graphite
C Diamond
All of the above
Answer: D all of the above
Explanation: Coal, Graphite, Diamond are all allotropes of Carbon. Hope this helps :)
Explain why, in terms of forces, there is a risk of head injury when diving from this height. Suggest why the high divers would choose to enter the water feet first.
Answer:
Due to lower risk of injury or damage.
Explanation:
The high divers would choose to enter the water from the feet first because there is low risk of injury. The brain is the most important part of the body which very sensitive to any small injury. Small injury to brain leads to big problems in life. High divers can reach speeds of nearly 60 mph and enters about 28m into the water in about three seconds which can damage the head region if comes in contact with the ground so this is the reason the high divers avoid of entering in the water through their heads and choose entering through their feet.
According to Newton's first law of motion when will an object at rest begin to move
Answer:
When acted upon by a force.
Explanation:
"If a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force."
How are wavelength, pitch, frequency, and energy all related?
Answer:
he word that musicians use for frequency is pitch. The shorter the wavelength, the higher the frequency, and the higher the pitch, of the sound. In other words, short waves sound high; long waves sound low. ... In other words, it sounds higher
Explanation:
What is the relationship between large amplitude waves and small amplitude waves?
A Both waves have variable energy.
B Large amplitude waves have more energy than small amplitude waves.
C Large amplitude waves have less matter than small amplitude waves.
D Both waves have constant matter.
Answer:
c.large amplitude waves have less matter than small amplitude waves
PLEASE HELP ME I AM TIMED!
Answer: B
Explanation: I can tell the block weights more since the water went down
Describe the parts of a hurricane and the hazards of a Category 3 Hurricane.
A category three hurricane are major ones that can cause incredible damage like blowing off roofs, cause power outages, uproot trees, lead old buildings to fall, etc. The parts of a hurricane are the eye, storm surge, eyewall, rain bands, and outflow.
What happens to a digital signal sent using electromagnetic waves as it travels farther from its source?
A. The signal becomes weaker and more difficult to detect
B. The signal slows down and becomes distorted
C. The signal needs to be amplified before it can be detected
D. The digital signal changes to an analog signal.
Answer:
did you find the answer please answer back
Answer:a
Explanation:ap ex verified
how long would it take a leopard, running at an average speed of 20 m/s to travel 500 m?
Answer:
25 seconds
Explanation:
500/20
Explain how radioactive decay works for measuring the absolute age of ancient objects.
Answer: Radioactive decay is the breakdown of a material into stable isotopes which are used for determining the age of the ancient material.
Explanation:
The radioactive decay is a natural process in which an ancient or old material whether in the form of rock, object or fossil break down into elements. Carbon 14 is an unstable isotope which decays to produce stable elements, the dating procedure uses these stable elements and the rate of decay of the isotopes to determine the age of absolute ancient of the objects but exact age cannot be determined just an approximation can be accepted.
Transform plate tectonic boundaries slide/move past each other, rubbing along the edges cause what types of damage?
Question 3 options:
tornadoes, flooding, destruction
hurricanes, flooding, wave surge
earthquakes, tsunami, landslides
blizzards, freezing conditions, snow drifts
Transform plate tectonic boundaries slide/move past each other, rubbing along the edges causing earthquakes, tsunami, landslides
What is earthquake?An earthquake is the shaking of the surface of the Earth resulting from a sudden release of energy in the Earth's lithosphere that creates seismic waves.
The answer is c is because when tectonic plates are rubbing against each other that’s how an earthquake is formed.
another reason the answer is C is because when the tectonic plates are moving together it can cause the land to slide.
the last reason the answer is C is because when the tectonic plates in the ocean move it can cause a tsunami.
Hence transform plate tectonic boundaries slide/move past each other, rubbing along the edges causing earthquakes, tsunami, landslides
To know more about Earthquake follow
https://brainly.com/question/248561
How much work is done on a pumpkin with a force of 24 newtons when you lift it 15 meters? *
Answer:
I'm not that busy solving but I'll tell you the formula that Force x distance is equal to work done
The work is done on a pumpkin when we lift it by 15 m with 24 N is 360 J
What is Work ?Work done is the amount energy gained (loosed) in bringing the body from initial position to final position. It is denoted by W and its SI unit is joule(J).
i.e. Work(W) is force(F) times displacement(s).
W=F× s
When a body is displaced with 1 newton of force by 1 m, then we can say that work has been done on the body by 1 joule.
Writing for it's dimension,
W=F× s
Force has dimension [L¹ M¹ T²]
Displacement has dimension [L¹]
multiplying both the dimensions Force and Displacement
we get,
dimension of Work [L² M¹ T²]
According to newton's second law of motion,
Force(F) is mass(M) times acceleration(a).
i.e. F=ma
Given,
Force = 24 N
Displacement = 15 m
W=F.s= 24*15 = 360 J
Hence work done on pumpkin is 360 J
To know more about Work, click:
https://brainly.com/question/29989410
#SPJ3
At high elevations or high latitudes, some of the water that falls on land does not immediately soak in , run off, evaporate or transpire. where is the water being temporarily stored?
Answer:
The water is stored in ice sheets and as snow
Explanation:
Temperature reduces with an increase in altitudes. The standard laps rate is 6.5°C per 1,000 m gained in elevation
At very high elevations, therefore, the air is usually very cold such that when an elevation of 4,500 meters is reached at the equator, it is possible to observe snowfall and the water remain temporarily stored on the surface of the mountain as ice and snow
Can anyone help me with this question please .
I’ll mark as brainliest
No links
Answer:
A
Explanation:
The wavelength is the spatial time of an occasional wave, the distance over which the wave's shape rehashes.
Hope this helped!!
Answer:
wavelength
Explanation:
Fig. 2.1 shows a hammer being used to drive a nail into a piece of wood.
hammer head
-nail
wood
Fig. 2.1
The mass of the hammer head is 0.15 kg.
The speed of the hammer head when it hits the nail is 8.0m/s.
The time for which the hammer head is in contact with the nail is 0.0015s.
The hammer head stops after hitting the nail.
(a) Calculate the change in momentum of the hammer head.
Answer:
ΔP = - 1.2 Ns
Explanation:
The change in momentum of the hammer head can be given as follows:
[tex]\Delta P = P_f - P_i\\[/tex]
where,
ΔP = Change in Momentum = ?
Pf = Final Momentum
Pi - Initial Momentum
Therefore,
[tex]\Delta P = mv_f - mv_i\\\Delta P = m(v_f - v_i)[/tex]
where,
m = mass of hammer head = 0.15 kg
vf = final speed of hammer = 0 m/s
vi = initial speed of hammer = 8 m/s
Therefore,
[tex]\Delta P = (0.15\ kg)(0\ m/s-8\ m/s)[/tex]
ΔP = - 1.2 Ns
A contour map has 14 concentric circles, each placed 1/2 centimeters apart. The map's scale indicates 1cm = 10 ft. What is the structure, and what are its dimensions?
Answer:
B. A hill 70ft tall.
Explanation:
What percentage of the starting matter in our solar system went into the formation of our sun?
Answer:
Eventually the pressure in the core was so great that hydrogen atoms began to combine and form helium, releasing a tremendous amount of energy. With that, our Sun was born, and it eventually amassed more than 99 percent of the available matter
Write a 4-5 sentences paragraph explaining how one of the following organisms with adapt to a new environment (what adaptations would they not need and what ones what they need?What would they eat?)
1. Polar bear moving to a tropical rainforest.
2. Lizard moving to the North Pole
Be Creative!!!!!
No googling! Or no links
Answer:
We're supposed to write a 4-5 paragraph essay for only 6 points...sorry but no
Explanation:
The only players permitted to wear mitts over gloves are _________.
1 the pitcher and first base player
2 the catcher and outfielder
3 the catcher and first base player
4 the catcher and pitcher
Answer:
the catcher and outfielder
Explanation:
Answer: The catcher and the player at first base are the only players permitted to wear mitts rather than gloves. So, the answer would be 3.
Explanation: I had this on a quiz and got it right.
Hope this helps!
phase difference formula
Answer:
Δx is the path difference between the two waves.
...
Phase Difference And Path Difference Equation.
Formula Unit
Phase Difference \Delta \phi=\frac{2\pi\Delta x}{\lambda } Radian or degree
Path Difference \Delta x=\frac{\lambda }{2\pi }\Delta \phi meter
what is the difference between malleability and ductile ??
Please don't post invalid answer please..!!
Please post correct answer please..!!
Answer:
A malleable material is one in which a thin sheet can be easily formed by hammering or rolling. ... In contrast, ductility is the ability of a solid material to deform under tensile stress.
Atmospheric pressure on the peak of Mt. Everest can be as low as 0.197 atm, which is why
climbers need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0
liter tanks with an internal gas pressure of 40 atm, what will be the volume in liters of the gas
when it is released from the tanks?
Answer:2,030
Explanation:
40 atm x 10.0 L = 400
400/0.197 atm = 2,030
What is number 5?! I’m so confused.
Answer:
i think it's A
Explanation:
Answer:
The answer is A
Explanation:
The behavior of the light incident upon this page best illustrates the phenomenon of
A)
diffuse reflection
B)
regular reflection
C)
diffraction
D)
refraction
Answer:
diffraction
Explanation:
The behavior of the light incident upon this page best illustrates the phenomenon of diffraction
hope it help:)
The behaviour of such incident light on just this pages adequately exemplifies the phenomena called Diffraction. A further explanation is below.
DiffractionThe broadening out of waveforms when they transit through such an apertures anywhere around obstructions generally referred to as diffraction.
It happens whenever the aperture as well as obstruction seems of the equivalent order of magnitude as that of the transmitted beam's wavelength.
Thus the approach above i.e., option C is correct.
Find out more information about Diffraction here:
https://brainly.com/question/16749356
In context of nepal it is better to use energy like solar power .why?
Answer:
Nepal is one of the least developed countries. Solar power is well-founded than electricity. It's better to use solar power because it's a clean resource, the sun provides more energy than we will ever need.
Explanation: