if the force of friction opposing the motion is 18 n, what force f (in n) is the person exerting on the mower? (enter the magnitude.)

The primary challenge associated with using solar energy as a primary source of electricity is the cost and availability of the technology.

Cost: One of the significant challenges of solar energy is its cost. Solar power systems are expensive to install and maintain, and the initial costs of buying and installing solar panels and batteries can be high.

Capacity: Solar energy is an intermittent power source, meaning it can only produce electricity when the sun is shining. This means that solar power systems need to have a backup power source, such as batteries or an electrical grid, to provide electricity when there is no sunlight available.

Storage: Storing solar energy is a challenge, as batteries used to store energy can be expensive and have a limited lifespan. This means that solar power systems need to be designed to store energy effectively, or they will not be able to provide power when it is needed most.

Weather conditions: Solar panels rely on sunlight to produce electricity, which means that they can be affected by weather conditions such as cloud cover and rain. In areas with a lot of cloud cover or rain, solar power systems may not be able to produce enough electricity to meet demand.

Installation: Installing solar panels requires a large amount of space, which can be challenging in urban areas. Solar panels also need to be installed in a way that maximizes their exposure to the sun, which can be difficult in areas with a lot of shade.

Maintenance: Solar power systems require regular maintenance to ensure that they are working efficiently. This can involve cleaning the solar panels to remove dirt and debris, replacing worn-out components, and checking the system's performance to ensure that it is generating electricity as efficiently as possible.

In conclusion, Solar panels are expensive to install and maintain, and the amount of sunlight they receive will vary depending on the location and weather. Additionally, storing the solar energy collected during the day for use at night can also be a challenge.

To know more about Solar Energy, refer here:

https://brainly.com/question/9704099#

#SPJ11

A bulb emits light ranging in wavelength from 2.64e-7 m to 8.66e-7 m. The maximum frequency of the light is [tex]1.14 \times 10^{15} Hz.[/tex]

To find the maximum frequency of the light, we can use the formula for the speed of light in a vacuum.

The speed of light (c) is given by [tex]3.00 \times 10^{8} m/s.[/tex]

We can use the following formula to find the frequency of light:

f = c / λ

where f is the frequency of light, c is the speed of light, and λ is the wavelength of light.

The maximum frequency of the light will be when the wavelength is at its minimum value. So, we can use the minimum wavelength in the formula above.

Hence, the maximum frequency of the light is given by:f = c / λmax

                                                                                              = [tex]3.00 \times 10^{8}  / 2.64 \times 10^{-7}[/tex]

                                                                                              = [tex]1.14 \times 10^{15} Hz.[/tex]

for such more question on frequency

https://brainly.com/question/254161

#SPJ11

When an elevator that is suspended by a cable slows down to a stop and is moving upward, the free-body diagram that is correct is A. shows that the net force acting on the elevator is in the downward direction.

The weight of the elevator, which is the force of gravity acting on it, is pulling it down. The upward force being exerted by the cable is also indicated in the free-body diagram. When the elevator slows down, the tension in the cable decreases, which causes the elevator to slow down. Finally, when the elevator comes to a halt, the tension in the cable equals the weight of the elevator, and the net force acting on the elevator is zero.

A free-body diagram is a diagram that shows all of the forces acting on a body. It can also be referred to as a force diagram. Free-body diagrams are used to visually represent the forces that are acting on an object. They aid in the understanding of an object's motion and are frequently used in physics to analyze and comprehend motion.

Learn more about free-body diagram at:

https://brainly.com/question/10148657

#SPJ11

Answer:

(b) 400 nm is the far ultraviolet (violet) in the visible spectrum

The shorter wavelengths are more likely to cause sunburn.

200 nm is probably too short to be transmitted by the atmosphere

The  comparison between the gravitational force and the electrical force between two protons that are separated by 1.2 x 10-15 m is 4.47 * 10⁻⁴⁰

Gravitational attraction between the universe's original gaseous matter allowed it to coalesce and form stars, which eventually condensed into galaxies, so gravity is responsible for many of the universe's large-scale structures. Gravity has an infinite range, but its effects weaken as objects move further away. The general theory of relativity (proposed by Albert Einstein in 1915) most accurately describes gravity as the curvature of spacetime caused by the uneven distribution of mass, causing masses to move along geodesic lines.

using the formula

F = G [tex]\frac{M1 * M2}{R * R}[/tex]

FORCE COMES OUT TO BE ;

4.47 * 10⁻⁴⁰

TO know more about gravitational force , visit ;

brainly.com/question/12528243

#SPJ1

Through the coil, the magnetic flux rises. The coil will experience a voltage as a result. This voltage will cause a current to flow. The amount of the emf increases with speed and is 0 in the absence of motion.

A current will be induced in a coil of wire if it is exposed to a shifting magnetic field. Because of an electric field that is being generated, which drives the charges to move around the wire, current is flowing.

Self-Inductance: When current passes through a coil, a magnetic field and consequent magnetic flux are created.

To know more about magnetic flux visit:-

brainly.com/question/30858765

#SPJ1

This principle can be observed in other everyday scenarios, such as jumping on a trampoline or the recoil of a gun after firing.  Newton's Third Law of Motion is a fundamental principle in classical mechanics and explains why the spring will bounce when the weight is released.

The bouncing of the weight when released is explained by Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. When the weight is released, the spring exerts an equal and opposite force on the weight, propelling it upwards and causing it to bounce. This is because when the weight is pulled down, it compresses the spring, storing potential energy. When the weight is released, the spring decompresses and the potential energy is released, propelling the weight in the opposite direction.

To learn more about Newton's Third Law ;

https://brainly.com/question/25998091

#SPJ11

Answer:

ω = (k / m)^1/2      proportionality for angular speed in SHM

f =  ω / 2 * π

Since P = 1 / f      the period is inversely proportional to ω

P proportional to m

P inversely proportional to k the spring constant

When a mass m is hung on a certain ideal spring, the spring stretches a distance d. if the mass is then set oscillating on the spring, the period of oscillation is proportional to the square root of the mass-to-spring constant ratio.

A spring, also known as a force spring, is a mechanical device that converts energy from one form to another, depending on Hooke's law. Hooke's law is a principle in physics that states that the force required to compress or extend a spring by a certain length is proportional to that length's deviation from its equilibrium length when it is not being acted upon by any forces.

The formula for Hooke's law is:F = -kxWhere:F is the force applied, x is the displacement from the equilibrium length, k is the spring constantThe period of oscillation is the time required to complete one oscillation. It is dependent on the mass m of the system and the spring constant k. The time period of oscillation is proportional to the square root of the mass-to-spring constant ratio. It is calculated using the formula:T = 2π * √m/k, where:T is the period of oscillationm is the mass of the objectk is the spring constantTherefore, the correct option is C.

Learn more about Hooke's law at:

https://brainly.com/question/2449067

#SPJ11

The total sound intensity level is approximately 87 dB.

When two sounds with different intensities are present simultaneously, the total sound intensity level is found by adding the individual sound intensity levels in decibels (dB) using the following equation,

L_total = 10 log10(I_total/I_0)

where L_total is the total sound intensity level, I_total is the total sound intensity, and I_0 is the reference sound intensity (usually taken as 10^-12 W/m^2).

In this case, we have two sounds with intensity levels of 80.0 dB and 90.0 dB. To find the total sound intensity level, we first need to convert each intensity level to sound intensity,

I_1 = I_0 10^(L_1/10) = (10^-12 W/m^2) 10^(80.0/10) = 10^-5 W/m^2

I_2 = I_0 10^(L_2/10) = (10^-12 W/m^2) 10^(90.0/10) = 10^-4 W/m^2

where L_1 and L_2 are the intensity levels of the two sounds in dB.

The total sound intensity is the sum of these two sound intensities,

I_total = I_1 + I_2 = 10^-5 W/m^2 + 10^-4 W/m^2 = 1.1 x 10^-4 W/m^2

L_total = 10 log10(I_total/I_0) = 10 log10(1.1 x 10^-4/10^-12) ≈ 87 dB

To know more about sound intensity, here

brainly.com/question/28448860

#SPJ4

The force a charge of 5 coulombs for a point charge 'q' which is far from all other charges can be calculated by Coulomb's law.

The Coulomb's law states that the force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them:

[tex]F = k * (q_1 * q_2) / r^2[/tex]

where F is the force,

k is Coulomb's constant ([tex]k = 9*10^9[/tex] N m² / C²),

q₁ and q₂ are the charges, and

r is the distance between the charges.

We know that there is only one charge, q, and it is far from all other charges, so we can assume that

q₁ = q and q₂ = 5 C.

We also know that the electric field at a distance of 2 m from q is 20 N/C. The electric field is related to the force per unit charge, so we can use the equation:

[tex]E = F / q_2[/tex]

Therefore To find the force F acting on a charge q₂ at that distance.

Rearranging this equation in terms of F, we get:

[tex]F = E * q_2[/tex]

Substituting the values we have, we get:

F = 20 N/C * 5 C = 100 N

Therefore, a charge of 5 coulombs would feel a force of 100 N due to the point charge q.

To lean more about the 'Coulombs Law':

https://brainly.com/question/506926

#SPJ11

When you takes off in a car with a physics book on top, if the person is accelerating forward and the book rides with you, then friction will act on the book in the opposite direction to the motion of the book, this means that the direction of friction acting on the book will be in the backward direction.

The friction always acts in the opposite direction to the motion of the object. When the car accelerates forward, the book also starts to move forward with the same speed as the car. However, the book is still in contact with the car's seat, and the seat exerts a force of friction on the book.

According to Newton's third law of motion, the book also exerts an equal and opposite force of friction on the seat. Since the book is moving in the forward direction, the direction of friction acting on it will be opposite to the direction of motion, which means that friction will act in the backward direction. Therefore, the direction of friction acting on the book is in the backward direction.

Learn more about Newton's third law at:

https://brainly.com/question/29768600

#SPJ11

The number of electrons per second that enter the positive end of a battery can be calculated by the current flowing through the circuit and the time for which it flows.

Therefore, The formula of current is as

I = Q/t

where I is the current,

Q is the charge passing through the circuit, and

t is the time for which the current flows.

Since one electron carries a charge of -1.6 x 10⁻¹⁹Coulombs, we can calculate the number of electrons passing through the circuit using the following formula:

n = Q/e

where n is the number of electrons and

e is the charge on an electron (-1.6 x 10⁻¹⁹ Coulombs).

If we know the current flowing through the circuit and the time for which it flows, we can calculate the number of electrons per second using the following formula:

n/s = I/e

where n/s is the number of electrons per second.

To learn more about the battery :

https://brainly.com/question/1699616

#SPJ11

Josh's left and right hands exert equal and opposite forces on each other when he punches his open left hand with his right hand.

This means that when his right-hand pushes on his left hand, his left hand also pushes on his right hand with the same force.

This is Newton's Third Law of Motion:

"For every action, there is an equal and opposite reaction."

The magnitude of the forces exerted by both hands will be the same, but they will act in opposite directions. The force that Josh's right hand exerts on his left hand will be directed to the left, while the force that his left hand exerts on his right hand will be directed to the right.

As a result, the net force on both hands will be zero, as the two forces cancel each other out.

In summary, Josh's hands will be exerting equal and opposite forces on each other according to Newton's Third Law of Motion.

To know more about forces, refer here:

https://brainly.com/question/13191643#

#SPJ11

Based on our understanding of our own solar system, the most surprising observation in an extra-solar system of planets would be the presence of a large number of gas giants orbiting very close to their star.

To learn more about extra-solar system  https://brainly.com/question/14018668

#SPJ11

When lighted, a 100-watt light bulb operating on a 110-volt household circuit has a resistance closest to 0.99 ohms.

Resistance refers to the electrical property of a circuit component, such as a light bulb, that resists the flow of electrical current through it.

Ohm's law is a fundamental principle in electrical engineering that relates the resistance, voltage, and wattage in a circuit. It states that the resistance (R) is equal to the voltage (V) divided by the wattage (W).

W = 100 watts, V = 110 volts.

Use Ohm’s law to calculate the resistance (R):

R = V/W = 110/100 = 0.99 ohms.

Therefore, when a 100-watt light bulb is operating on a 110-volt household circuit, its resistance is approximately 0.99 ohms.

To know more about resistance click here:

https://brainly.com/question/11431009

#SPJ11

Answer:

It's a golgi body

Explanation:

It controls the transport system of the cell

What goes in and out the cel

Answer:

100 feet at 75 mph.

mph expresses the speed or velocity in miles per hour. Speed means rate of change of distance with respect to time.

speed = distance/time

hence, distance = speed x time

The above equation is the relationship between distance, speed and time.

Coney Island is a famous destination known for its amusement parks, boardwalk, and beautiful beach.

One of its most popular attractions is the Thunderbolt, which is a steel roller coaster that gives riders a thrilling experience of high speeds, steep drops, and sharp turns.

The distance and speed at which riders get shot in the air on the Thunderbolt roller coaster are 100 feet and 75 mph, respectively.

This means that the ride launches riders at a height of 100 feet while travelling at a speed of 75 miles per hour.

This can be a scary experience, as the force of gravity can make riders feel like their organs are relocating.

To know more about velocity:

https://brainly.com/question/16743925?

#SPJ11

Each player must pull with a force of 1250 N to drag the coach at a steady 2.0 m/s.

To determine how hard each player must pull to drag the coach at a steady 2.0 m/s, we need to use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:

Fnet = m * a

where Fnet is the net force, m is the mass of the coach and players, and a is the acceleration of the coach and players.

Assuming that the coach and players can be treated as a single object, we can use the given speed to find the acceleration of the object using the formula:

a = v² / (2 * d)

where v is the speed (2.0 m/s) and d is the coefficient of kinetic friction between the coach and the ground.

The force required to overcome friction and drag the coach at a steady speed is given by:

Ffriction = friction coefficient * Fnormal

where Fnormal is the normal force (equal to the weight of the coach and players) and the friction coefficient is a dimensionless quantity that depends on the nature of the contact surface.

Assuming a friction coefficient of 0.5 and a weight of 5000 N for the coach and players, the force required to overcome friction is:

F_friction = (0.5) * (5000 N) = 2500 N

The net force required to move the coach and players at a steady 2.0 m/s is therefore:

Fnet = Ffriction = 2500 N

Finally, we can use Newton's second law to find the force required from each player:

Fnet = m * a

2500 N = (m_coach + m_players) * (v² / (2 * d))

Solving for the mass (m_coach + m_players), we get:

m_coach + m_players = (2500 N * 2 * d) / v²

Assuming a value of 0.3 for the coefficient of kinetic friction between the coach and the ground, we get:

m_coach + m_players = (2500 N * 2 * 0.3) / (2.0 m/s)² = 562.5 kg

Therefore, the force required from each player is:

Fplayer = Fnet / 2 = 1250 N

Learn more about The Force: https://brainly.com/question/26115859

#SPJ11

The coefficient of static friction between the tires and the road if a car is to round a level curve of radius 145 m at a speed of 130 km/h is 4.64

Whenever the object rotаtes аround the curved pаth then а net force аcts on the object pointing towаrds the center of а circulаr pаth аnd it is cаlled а centripetаl force. Mаthemаticаlly, we cаn write;

Centripetаl Force = [tex]\frac{mv^{2} }{r}[/tex]

where m is the mass of the body, v is the velocity of the body, and r is the radius of rotation.

We are given:

Since the car is making circular motion, therefore, necessary centripetal force is provided by the frictional force.

frictional force = centripetal force

μsmg = [tex]\frac{mv^{2} }{r}[/tex]

μs = [tex]\frac{v^{2} }{rg}[/tex]

μs = [tex]\frac{81.25^{2} }{145.9.81}[/tex]

μs = 4.64

Therefore, the coefficient of static friction between the tires of the car and the road surface is 4.64.

For more information about the coefficient of static friction refers to the link: https://brainly.com/question/13828735

#SPJ11

Air masses contribute to the formation of air fronts because air masses are large bodies of air that have similar characteristics in terms of temperature, humidity, and stability.

When two air masses with different characteristics come into contact, they form a boundary known as an air front. The characteristics of the two air masses determine the type of air front that forms.

There are four types of air fronts: cold fronts, warm fronts, stationary fronts, and occluded fronts.

Air masses play a significant role in the formation of air fronts because they determine the characteristics of the air mass that will form at the boundary between the two air masses. This, in turn, determines the type of air front that will form and the type of weather that will result. For example, a cold, dry air mass coming into contact with a warm, moist air mass will likely result in a cold front and a period of heavy precipitation.

To learn more about Air masses, visit: https://brainly.com/question/19626802

#SPJ11

The conservation of momentum is a law of physics that governs the behavior of objects in motion. It states that the total momentum of a closed system remains constant if there are no external forces acting on it. This means that the momentum of an object cannot be created or destroyed, only transferred from one object to another.

Experimental evidence of conservation of momentum in inelastic and elastic collisions:

In conclusion, experimental evidence shows that the conservation of momentum is a fundamental principle in both inelastic and elastic collisions. This principle is useful in many areas of physics, including the study of collisions, the behavior of fluids, and the motion of celestial bodies.

To know more about the "conservation of momentum": https://brainly.com/question/7538238

#SPJ11

When a body of mass 2.00 kg is pushed straight upward by a 25.0 N external vertical force near the surface of the Earth, its acceleration is 12.5 m/s2. This is equal to the acceleration due to gravity (g).

The acceleration of a body of mass 2.00 kg when pushed straight upward by a 25.0 N external vertical force near the surface of the Earth can be calculated using Newton's Second Law of Motion:

F = ma. This states that the force (F) acting on the body is equal to its mass (m) multiplied by its acceleration (a).

Thus, the acceleration of the body can be found by rearranging the equation to a = F/m, where F = 25.0 N and m = 2.00 kg. This gives an acceleration of 12.5 m/s2.

This acceleration is the same as the acceleration due to gravity (g). The gravitational force (Fg) acting on the body is equal to the mass of the body (m) multiplied by the acceleration due to gravity (g).

Therefore, Fg = mg = (2.00 kg)(9.80 m/s2) = 19.6 N. Since the force (F) pushing the body upwards is greater than Fg, the body will accelerate in the upwards direction.

This is why the acceleration of the body (a) is equal to 12.5 m/s2.

to know more about acceleration refer here:

https://brainly.com/question/30660316#

#SPJ11

The football is moving at approximately 59 meters/second (212.3 kilometers/hour) upon impact, neglecting air resistance.

The football is moving at approximately 59 meters/second (212.3 kilometers/hour) upon impact, neglecting air resistance. This can be calculated using the equation s=1/2at^2, where 's' is the displacement, 'a' is the acceleration due to gravity (9.8m/s^2), and 't' is the time of the fall (4 seconds). Therefore, the displacement is s=1/2(9.8m/s^2)(4s)^2, which simplifies to s=78.4m.
Since the displacement is known (78.4m), the velocity can be determined using the equation v^2=u^2+2as, where 'v' is the velocity upon impact, 'u' is the initial velocity (0m/s), and 'a' is the acceleration due to gravity (9.8m/s^2). Therefore, the velocity is v=sqrt(2as), which simplifies to v=sqrt(2(9.8m/s^2)(78.4m)), which simplifies to v=59m/s.
This is the speed of the football upon impact, neglecting air resistance. This assumes that the football is dropped from rest, and experiences a uniform acceleration throughout the fall, which is due to gravity. The acceleration due to gravity is a constant 9.8m/s^2, regardless of the speed of the falling object.

For more such questions on Displacement.

https://brainly.com/question/28523671#

#SPJ11

The average force exerted on the bullet by the ammunition is 2434.2 N.

We can use the impulse-momentum theorem to determine the average force exerted on the bullet by the ammunition:

[tex]F_{avg} \times t = \Delta p[/tex]

where F_avg is the average force, t is the time over which the force is applied, and Δp is the change in momentum of the bullet. Since the bullet is fired from the muzzle of the rifle, we can assume that the time over which the force is applied is equal to the time it takes for the bullet to travel the length of the barrel:

t = L / v

where L is the length of the barrel and v is the velocity of the bullet.

Substituting L = 0.950 m and v = 555 m/s, we get:

t = 0.950 m / 555 m/s = 0.00171 s

The change in momentum of the bullet can be calculated as:

[tex]\Delta p = p_f - p_i[/tex]

where p_f is the final momentum of the bullet and p_i is its initial momentum. Since the bullet is fired from rest, its initial momentum is zero. The final momentum can be calculated using the formula:

p_f = m * v

where m is the mass of the bullet and v is its velocity. Substituting

m = 7.50 g = 0.00750 kg and v = 555 m/s, we get:

[tex]p_f = 0.00750 kg \times 555 \ m/s = 4.16\ kg m/s[/tex]

Therefore, the change in momentum of the bullet is:

[tex]\Delta p = p_f - p_i = 4.16\ kg m/s - 0 = 4.16 \ kg m/s[/tex]

Substituting t = 0.00171 s and Δp = 4.16 kg m/s into the expression for the average force, we get:

[tex]F_{avg} \times t = \Delta p[/tex]

[tex]F_{avg} = \Delta p / t = (4.16\ kg m/s) / (0.00171 s) = 2434.2\ N[/tex]

Therefore, the average force exerted on the bullet is 2434.3 N.

Learn more about force:

https://brainly.com/question/12785175

#SPJ11

The method of trying different approaches to solve a problem until one works is called trial and error.

It involves experimenting with different methods or strategies until the correct solution is found. It is a common problem-solving method used in many fields, including physics, mathematics, engineering, and computer science. It can be a time-consuming process, but it can also be an effective way to arrive at a solution when other methods fail.

What is trial and error method?

The trial and error method is a problem-solving strategy that involves experimenting with different solutions or approaches until the correct one is found. This method is commonly used when the problem is complex or the solution is not obvious. The trial and error method involves trying different approaches, observing the results, and adjusting the approach until the desired outcome is achieved. It is often a time-consuming process but can be effective in finding solutions when other methods fail.

To know more about trial and error method, visit:

https://brainly.com/question/4123314

#SPJ1

The true statements about the radial (centripetal) acceleration and the tangential acceleration at the end of the blade are: the radial acceleration is non-zero the tangential acceleration is zero

The radial acceleration is non-zero and the tangential acceleration is zero. This is because, the radial acceleration is determined by the formula, ar = (v²)/r

where ar is the radial acceleration, v is the velocity and r is the radius. Thus, since the propeller blade is spinning at a constant rate, the velocity v is constant.

Therefore, the radial acceleration is constant and non-zero.

The tangential acceleration, on the other hand, is given by at = rα

where at is the tangential acceleration and α is the angular acceleration. Since the blade is spinning at a constant rate, the angular acceleration is zero. Therefore, the tangential acceleration is zero.

So, the correct option is the radial acceleration is non-zero and the tangential acceleration is zero.

Learn more about tangential acceleration at https://brainly.com/question/11476496

#SPJ11

From the sketch, we can deduce that the two charges q1 and q2 are of opposite signs, as field lines start at the positive charge q1 and end at the negative charge q2. The field lines also indicate that the magnitude of the electric field produced by q1 is larger than that of q2.

Learn more about electric field at: https://brainly.com/question/14372859

#SPJ11

Isaac encountered a water resistance force of 24,525 N on average as he dived to a depth of 2.5m beneath the water's surface.

Isaac's body experienced an average force of water resistance due to the water surrounding it. This force is determined by the volume and density of the water, as well as the acceleration of his body while it is moving.

First, we need to calculate the volume of the displaced water. We can use the formula:

V = Ah

where A is the surface area of the object and h is the depth to which it sinks. Since we don't have the surface area of Isaac's body, we can assume it to be 1 square meter for simplicity.

V = 1 * 2.5 = 2.5 cubic meters

To calculate the average force of water resistance experienced by his body, we can use the equation

Force = Volume x Density x Acceleration.

Using this equation, we can calculate the force of water resistance as follows:
Force = 2.5m^3 x 1000kg/m^3 x 9.81m/s^2
Force = 24,525 N.

Therefore, Isaac experienced an average force of water resistance of 24,525 N while his body was plunging to a depth of 2.5m below the water's surface.

To know more about the "average force of water resistance": https://brainly.com/question/20629953

#SPJ11

The new fundamental frequency of 880 Hz.

When you blow air into an open organ pipe, it produces a sound with a fundamental frequency of 440 Hz.

If you close one end of this pipe, the new fundamental frequency of the sound that emerges from the pipe is two times the initial frequency, i.e., 880 Hz.

When the air column is confined to one end of the pipe, the first harmonic that can be supported is the third harmonic.

The wavelength of the first harmonic is twice the length of the pipe, and the wavelength of the third harmonic is equal to the length of the pipe.

The frequency of the third harmonic is three times the frequency of the first harmonic.

The new fundamental frequency of the sound that emerges from the pipe is two times the initial frequency, i.e., 880 Hz.

This is because the frequency of the first harmonic is half that of the fundamental frequency in an open organ pipe.

When one end is closed, the first harmonic is no longer available, and the frequency of the second harmonic, which is twice the fundamental frequency, is available.

Therefore, the fundamental frequency is multiplied by two when one end of an open organ pipe is closed to produce a pipe that is open on one end and closed on the other.

This results in a new fundamental frequency of 880 Hz instead of 440 Hz, as observed in an open pipe.

to know more about frequency refer here:

https://brainly.com/question/14316711#

#SPJ11

The boat will bob up and down on ocean waves that have a wavelength of 36.0 m and a propagation speed of 4.80 m/s once every 7.50 seconds.

To solve the given question, we must use the formula:

n= v/f

Where: v is the velocity of the wave (in m/s)f is the frequency of the wave (in Hz)n is the number of cycles per second

Therefore, the frequency of the wave (in Hz) can be calculated by using the formula:

f= v/λ

where: v is the velocity of the wave (in m/s)λ is the wavelength of the wave (in m)

The frequency of the wave is 0.1333 Hz (approx).

Now, the number of cycles per second (n) is: n = v/λ

We can solve for n by dividing the velocity of the wave by the wavelength of the wave.

Therefore,

n= v/λ= (4.80 m/s) / (36.0 m)= 0.1333 Hz

So, the boat bob up and down 0.1333 times a minute on ocean waves that have a wavelength of 36.0 m and a propagation speed of 4.80 m/s.

1 Hz = 60 seconds,

0.1333 Hz = 7.50 seconds.

To know more about Frequency, refer here:

https://brainly.com/question/29739263#

#SPJ11