Answer: The current flowing will be halved.
Explanation: According to Ohm's Law,
V=IR
that is, I=[tex]\frac{V}{R}[/tex]
As R is doubled that is R=2R and V is the same that is V=V.
So, I= [tex]\frac{V}{2R}[/tex]
Comparing the equations we get,
that the current flowing has reduced to half.
Explain why an aluminum ball and a steel ball of similar size and shape, dropped from the same height, reach the ground at the same time.
An aluminum ball and a steel ball of similar size and shape, dropped from the same height, will reach the ground at the same time because they experience the same acceleration due to gravity, regardless of their masses or materials.
This is because, according to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. When two objects of different masses are dropped from the same height, they experience the same gravitational force due to the Earth's mass, which causes them to accelerate downwards at the same rate.
This acceleration due to gravity is approximately 9.81 m/s^2, which means that both the aluminum ball and the steel ball will have the same acceleration as they fall. As a result, both balls will fall at the same rate and hit the ground at the same time.Additionally, air resistance could potentially affect the falling rate of the two balls, but for balls of a similar size and shape, this effect is negligible and will not significantly impact the time it takes for the balls to reach the ground.
Learn more about Newton's Second Law of Motion here:
https://brainly.com/question/13447525
#SPJ11
Cosmic rays (atomic nuclei stripped bare of their electrons) would continously bombard Earth's surface if most of them were not deflected by Earth's magnetic field. Given that Earth is, to an excellent approximation, a magnetic dipole, the intensity of cosmic rays bombarding its surface is greatest at the: a. poles. b. mid-latitudes. c. equator. d. It is the same everywhere.
The intensity of cosmic rays bombarding Earth's surface is greatest at the poles. The correct option is a.
Earth's magnetic field is generated by the motion of molten iron in its core, and it resembles that of a bar magnet with a north and south pole. This creates a magnetic dipole field, with field lines extending from the south pole to the north pole.
Cosmic rays are charged particles, typically high-energy atomic nuclei stripped of their electrons, that travel through space. When these cosmic rays approach Earth, they are deflected by its magnetic field.
The deflection is the greatest at the poles, where the magnetic field lines are perpendicular to the surface of the Earth. This causes cosmic rays to be concentrated and trapped in the polar regions, resulting in the highest intensity of cosmic rays bombarding Earth's surface at the poles.
At mid-latitudes and the equator, the angle between the magnetic field lines and the surface of the Earth is less, resulting in less deflection of cosmic rays. Therefore, the intensity of cosmic rays bombarding Earth's surface is greatest at the poles.
To know more about cosmic rays refer here:
https://brainly.com/question/13960192#
#SPJ11
2. A student observes an apple falling from a tree and makes the following statement: The Earth exerts a force on the apple, the force of gravity The Earth does work on the apple, T can write the following equation to describe this interaction: *The work done by the Earth increases the apples kinetic energy and decreases its potential energy. What mistake is this student making? How would you correct the student?s equation
The mistake the student is making in the gravitational force applied to the apple is assuming that the work done by the Earth is equal to the change in kinetic and potential energy of the apple.
The student is making a mistake by equating work done by the Earth on the apple to the sum of the change in kinetic energy and the change in potential energy of the apple.
This is incorrect because work done by a force is equal to the change in energy of the object upon which the force acts. In this case, the work done by the gravitational force of the Earth on the apple is equal to the change in the potential energy of the apple.
The correct equation would be
[tex]W_{apple, earth}[/tex] = [tex]\triangle U_{gravity}[/tex], where [tex]U_{gravity}[/tex] is the gravitational potential energy of the apple-Earth system.
Learn more about the gravitation force at
https://brainly.com/question/29820451
#SPJ4
The question is -
A student observes an apple falling from a tree and makes the following statement:
W_{apple,earth} = ΔK + ΔU_{gravity}
The Earth exerts a force on the apple, the force of gravity The Earth does work on the apple, T can write the following equation to describe this interaction:
The work done by the Earth increases the apple's kinetic energy and decreases its potential energy.
What mistake is this student making?
How would you correct the student's equation?
Why is the low-power objective placed in position when the microscope is stored or carried?
The low-power objective is placed in position when the microscope is stored or carried to prevent damage to the higher-power objectives.
The low-power objective has a larger field of view and longer working distance compared to higher-power objectives. This makes it less susceptible to accidental contact with surfaces or objects that may cause damage.
When the microscope is stored or carried, there is a risk of jostling or bumping that could potentially cause the objectives to hit a surface or each other. By placing the low-power objective in position, it acts as a protective barrier for the higher-power objectives.
The high-power objectives, such as the oil immersion objective, are delicate and have a shorter working distance. They require precise alignment and are more sensitive to damage. By keeping the low-power objective in place, it reduces the chances of the higher-power objectives being exposed or coming into contact with any external forces.
Overall, placing the low-power objective in position when the microscope is stored or carried helps safeguard the more sensitive and fragile higher-power objectives, ensuring their longevity and proper functionality.
To learn more about microscope click here
brainly.com/question/1869322
#SPJ11
100mg/dL or 0.10g/dL is equal to how many drinks?
The conversion of 100mg/dL or 0.10g/dL to drinks depends on the type of alcoholic beverage and the individual's body weight and metabolism. Generally, one standard drink contains around 14 grams of alcohol, which is equal to 140mg/dL or 0.14g/dL in the blood. Therefore, to estimate the number of drinks equivalent to 100mg/dL or 0.10g/dL, we need to divide the alcohol content in the blood by the standard alcohol content per drink.
In this case, 100mg/dL or 0.10g/dL in the blood would be equivalent to around 0.7 standard drinks. However, it's important to note that this is an estimate and not an accurate measurement since several factors can influence an individual's blood alcohol concentration. Moreover, it's crucial to drink responsibly and avoid driving or engaging in any activities that require alertness and coordination when under the influence of alcohol.
TO KNOW MORE ABOUT ALCOHOLS CLICK THIS LINK -
brainly.com/question/30829120
#SPJ11
a runner taking part in the 200 m dash must run around the end of a track that has a circular arc with a radius of curvature of 45 m. if he completes the 200 m dash in 26.8 s and runs at constant speed throughout the race, what is the magnitude of his centripetal acceleration (in m/s2) as he runs the curved portion of the track? m/s2
The magnitude of the runner's centripetal acceleration as he runs the curved portion of the track is approximately 1.237 m/s².
To determine the magnitude of the runner's centripetal acceleration as he runs the curved portion of the track, we can follow these steps:
1. Find the runner's speed: Since the runner completes the 200 m dash in 26.8 seconds at a constant speed, we can calculate the speed by dividing the distance by the time:
Speed = Distance / Time
Speed = 200 m / 26.8 s
Speed ≈ 7.46 m/s
2. Calculate the centripetal acceleration: The formula for centripetal acceleration is:
Centripetal Acceleration = (Speed²) / Radius of Curvature
In this case, the radius of curvature is 45 m, and we already found the speed to be approximately 7.46 m/s. Now, we can plug these values into the formula:
Centripetal Acceleration = (7.46 m/s)² / 45 m
Centripetal Acceleration ≈ (55.69 m²/s²) / 45 m
Centripetal Acceleration ≈ 1.237 m/s²
So, by calculating we can say that the magnitude of the runner's centripetal acceleration is approximately 1.237 m/s².
To know more about the centripetal acceleration refer here :
https://brainly.com/question/14465119#
#SPJ11
create schematics identifying all the important mass and energy transfers occurring in the cooling tower system.
A cooling tower system involves several important mass and energy transfers that are crucial for effective cooling. The system works by removing heat from the water that has been used in various processes and transferring it to the air that is circulating within the tower.
The main components of the system include the water inlet, the heat exchanger, the fan, the cooling tower fill, and the water outlet. As the hot water enters the system through the water inlet, it is directed to the heat exchanger where it exchanges heat with the cool air.
The fan blows cool air through the fill, which is a collection of small plastic or metal pieces that increase the surface area of the air-water contact, allowing for efficient heat transfer.
As the water flows through the fill, it loses heat to the air, which is then released to the atmosphere. The cooled water then exits the system through the water outlet and is returned to the process for reuse.
The overall result is a significant reduction in the temperature of the water, making it ready for reuse in the process.
To know more about cooling tower system refer here:
https://brainly.com/question/28085452#
#SPJ11
You are at a place on the earth's surface where the earth's magnetic field is perpendicular to the ground. The electric field is zero. If you run through this field, you will find a magnetic field an electric field a magneto-electric field both a magnetic and an electric field both a magnetic and a muonic field
The magneto-electric effect causes both a magnetic and an electric field to exist, which is the right response to the question.
What is magnetic field?The area in which the force of magnetism acts around a magnetic material or a moving electric charge is known as the magnetic field.
If the Earth's magnetic field is perpendicular to the ground at your location, it means that the magnetic field lines are vertical and pointing downwards (or upwards) into the Earth. Since the electric field is zero, we can conclude that there is no electric current or charge in the vicinity.
If you run through this field, you will experience a magnetic field. This is because your motion through the magnetic field induces an electric field according to Faraday's law of electromagnetic induction. The induced electric field is perpendicular to both the magnetic field and your direction of motion, and it generates a magnetic field that is perpendicular to both the electric and magnetic fields. This phenomenon is known as magneto-electric effect or electromagnetic induction.
Therefore, the correct answer to the question is: you will find both a magnetic and an electric field due to the magneto-electric effect.
Learn more about magnetic field on:
https://brainly.com/question/14411049
#SPJ11
I WILL MARK AS BRAINLIEST!! HELP PLEASE!! I know that the correct answer is C, but can someone please explain it?
Answer:
Can you give me better photo because i cant see? i really want to help you
a concave makeup mirror is designed so that a person 23 cm in front of it sees an upright image magnified by a factor of 4. what is the radius of curvature of the mirror?
The radius of curvature of the concave makeup mirror is 230 cm.
To calculate the radius of curvature of the concave makeup mirror, we can use the mirror equation:
1/f = 1/v - 1/u,
where:
f = focal length of the mirror,
v = image distance,
u = object distance.
In this case, the person is 23 cm in front of the mirror, which means the object distance (u) is -23 cm (negative because it is in front of the mirror).
We are given that the person sees an upright image magnified by a factor of 4. Since the image is upright, the magnification (M) is positive. We can use the magnification formula:
M = -v/u,
where M = 4.
Substituting the values into the magnification formula, we get:
4 = -v/(-23),
Simplifying, we have:
4 = v/23.
Solving for v, we find:
v = 4✕ 23,
v = 92 cm.
Now, we can substitute the values of v and u into the mirror equation:
1/f = 1/92 - 1/(-23).
Simplifying, we have:
1/f = (1 + 4)/92,
1/f = 5/92.
To find the radius of curvature, we use the formula:
f = R/2,
where R is the radius of curvature.
Substituting the values, we get:
1/R = 2/5 ✕ 1/92,
1/R = 2/460,
R = 460/2,
R = 230 cm.
Therefore, the radius of curvature of the concave makeup mirror is 230 cm.
Know more about the Radius of curvature:
#SPJ12
When a switch in a circuit is closed the current does not go from 0 Amps to the Ohm's Law value because it takes time to accumulate the electric energy the current in the circult. should have It takes time to accumulate the resistive energy the current in the circuit should have It takes time to accumulate the magnetic energy the current in the circuig should have
When a switch in a circuit is closed, the current does not immediately jump to the Ohm's Law value because of several factors that affect the flow of electric energy in the circuit. One of these factors is the time it takes for the current to accumulate the electric energy it needs to flow through the circuit. This is due to the presence of resistance in the circuit, which slows down the flow of current.
Another factor that affects the current flow is the time it takes to accumulate the resistive energy that the current in the circuit should have. This is because the resistive energy is stored in the form of heat, which takes time to accumulate and dissipate in the circuit.
Lastly, the current flow is also affected by the time it takes to accumulate the magnetic energy that the current in the circuit should have. This is because the magnetic energy is stored in the form of magnetic fields, which take time to build up and stabilize in the circuit.
In summary, the current flow in a circuit is not instantaneous when a switch is closed because of several factors that affect the flow of electric energy, including resistance, resistive energy, and magnetic energy. These factors contribute to the gradual build-up of current in the circuit, which eventually reaches Ohm's Law value.
learn more about Ohm's Law here: brainly.com/question/14296509
#SPJ11
For each of the following cases, will light rays be bent toward or away from the normal? a. ni > nr , where θi = 20° b. ni < nr , where θi = 20° c. from air to glass with an angle of incidence of 30° d. from glass to air with an angle of incidence of 30°
a. Light rays will be bent towards the normal. b. Light rays will be bent away from the normal. c. Light rays will be bent towards the normal. d. Light rays will be bent away from the normal.
a. When the refractive index of the second medium (nᵣ) is less than that of the first medium (nᵢ), the light rays are bent towards the normal at the interface between the two media. This is known as refraction towards the normal. The angle of refraction in this case will be less than the angle of incidence.
b. When the refractive index of the second medium (nᵣ) is greater than that of the first medium (nᵢ), the light rays are bent away from the normal at the interface between the two media. This is known as refraction away from the normal. The angle of refraction in this case will be greater than the angle of incidence.
c. When light travels from air to glass, the refractive index of glass (nᵣ) is greater than that of air (nᵢ), and hence the light rays are bent towards the normal. The angle of refraction will be less than the angle of incidence.
d. When light travels from glass to air, the refractive index of air (nᵢ) is less than that of glass (nᵣ), and hence the light rays are bent away from the normal. The angle of refraction will be greater than the angle of incidence.
To know more about towards the normal, refer here:
https://brainly.com/question/12495920#
#SPJ11
If an atom absorbs a photon
a) the photon must have the right energy for the atom's energy levels.
b) the atom will gain energy.
c) other photons summoning to the same total energy may later be emitted.
d) the atom will move to a higher energy level.
All of the options (a), (b), (c), and (d) are correct. When an atom absorbs a photon, the photon must have the right energy for the atom's energy levels.
When an atom absorbs a photon:
a) The photon must have the right energy for the atom's energy levels. This is because the energy of the photon must match the difference between two energy levels of the atom in order for the absorption to occur.
b) The atom will gain energy. The energy gained by the atom is equal to the energy of the photon absorbed.
c) Other photons summing to the same total energy may later be emitted. When the atom returns to its original lower energy level, it may emit one or multiple photons whose total energy equals the energy difference between the energy levels.
d) The atom will move to a higher energy level. After absorbing the photon, the atom transitions to a higher energy level due to the gained energy.
To learn more about atoms click here https://brainly.com/question/30898688
#SPJ11
What type of stars found in the halo and bulge indicate?
The type of stars found in the halo and bulge of a galaxy, such as the Milky Way, indicate its age and formation history.
The halo is a roughly spherical region surrounding the galaxy, containing old stars with low metallicity. These stars are believed to be some of the first to form in the galaxy, indicating that the halo formed early in the galaxy's history. The bulge, on the other hand, is a central region containing mostly old, red stars. The properties of these stars suggest that the bulge formed through a process of rapid, intense star formation in the early stages of the galaxy's evolution. By studying the properties of these stars, astronomers can gain insights into the formation and evolution of galaxies, including our own.
learn more about halo here:
https://brainly.com/question/29976256
#SPJ11
(a) A rectangular gasoline tank can hold 38. 0 kg of gasoline when full. What is the depth of the tank if it is 0. 400 m wide by 0. 900 m long? FYI, the table of densities in the textbook refers to gasoline as "petrol"
Answer:
ρ = .68 g / cm^3 = 680 kg / m^3 for gasoline
M = ρ V = 38 kg
V = 38 kg / 680 kg/m^3 = .056 m^3
.4 * .6 * D = .056 m^3
D = .23 m
An object moving in the xy-plane is acted on by a conservative force described by the potential-energy function: U(x,y)=α(1x2−1y2)�(�,�)=�(1�2−1�2), where α� is a positive constant. Derive an expression for the force expressed in terms of the unit vectors ^i�^ and ^j�^ of the xy-plane?
The force acting on the object is conservative, as it can be derived from a potential-energy function. It is proportional to the distance from the origin and directed towards it, and its expression in terms of the unit vectors ^i and ^j is F(x,y) = [tex]2αx ^i - 2αy ^j.[/tex]
To derive the force expressed in terms of the unit vectors ^i and ^j, we need to calculate the gradient of the potential-energy function.
∇U(x,y) = [tex](∂U/∂x) ^i + (∂U/∂y) ^j[/tex]
∂U/∂x = α(-2x) and ∂U/∂y = α(2y)
Thus, ∇U(x,y) = [tex]-2αx ^i + 2αy ^j[/tex]
Therefore, the force acting on the object is given by F(x,y) = -∇U(x,y) = [tex]2αx ^i - 2αy ^j[/tex]
This means that the force acting on the object is directed toward the origin of the XY plane, and its magnitude is proportional to the distance from the origin. As the object moves away from the origin, the force acting on it decreases.
To know more about potential-energy function refer here:
https://brainly.com/question/11621795#
#SPJ11
a system of units sets definitions for fundamental qualities that are then used to derive all other units. which of the following is not a fundamental quality for a system of measurement?
The weight is not the fundamental quantity for a system of measurement, A system of units sets definitions for fundamental qualities that are then used to derive all other units.
The standard units as a meter for length, a kilogram for mass, and a liter for volume based on the system of measurement known as A metric system. In the 1790s metric system was introduced in France and many countries around the world are starting to use it officially. The system that is based on the international decimal system is the metric system.
The metric system is widely used in Europe and most of the rest of the world, and the Imperial or British system is now chiefly used in the USA are the two most common systems of measurement. The nominal, ordinal, interval, and ratio are the four levels of measurement (or scales). The SI base units of measurement are,
Length - meter (m)Time - second (s)Amount of substance - mole (mole)Electric current - ampere (A)Temperature - kelvin (K)Luminous intensity - candela (cd)Mass - kilogram (kg)To learn more about the metric system:
https://brainly.com/question/28234927
#SPJ4
Find the value of F2
The reaction force exerted by m₁ is 118.4 N.
Mass of the upper block, m₁ = 8 kg
Mass of the lower block, m₂ = 15 kg
Acceleration, a = 5 m/s₂
The normal reaction force is the force that the surfaces provide to stop solid objects from passing through one another. In touch, normal force is a force. Two surfaces cannot exert a normal force on one another if they are not in contact.
The force exerted by m₁ is,
F₁ = m₁(g + a)
F₁ = 8(9.8 + 5)
F₁ = 118.4 N
To learn more about normal reaction, click:
https://brainly.com/question/31432952
#SPJ1
Your question was incomplete. Attaching the image file here
what are the differences between circuits you find in your house andf the circuits on a microchip in a computer?
The circuits found in a house and on a microchip are designed to handle different voltages and currents, use different types of electricity, and are used for different purposes.
The circuits found in a house are typically designed to handle higher voltages and currents to power appliances and provide lighting. They are designed for alternating current (AC) electricity, which is the type of electricity supplied by the power grid. These circuits typically use wires made of copper or aluminum, and the components used are designed to handle the heat and stresses of the high voltage and current.
On the other hand, the circuits found on a microchip in a computer are designed to handle very low voltages and currents. They use direct current (DC) electricity, which is generated by a power supply unit and is typically converted from the AC power supplied by the power grid. The components used in these circuits are very small and are designed to be integrated onto the microchip, which is typically made of silicon. These components include transistors, capacitors, and resistors, among others.
Additionally, the circuits on a microchip are designed to perform specific functions, such as processing data or storing information. They are connected in a complex network to perform these functions, and the design and layout of the circuits are critical to their performance. The circuits in a house are typically simpler in design and are connected in a more straightforward manner.
Overall, the circuits found in a house and on a microchip are designed to handle different voltages and currents, use different types of electricity, and are used for different purposes.
To learn more about circuits visit:
brainly.com/question/2969220
The circuits in your house are designed to control and distribute electrical power to different appliances and devices, while the circuits on a microchip in a computer are designed to process and transmit information.
The circuits in your house typically use components such as switches, fuses, and transformers, while the circuits on a microchip in a computer use components such as transistors, resistors, and capacitors.
The circuits on a microchip in a computer are much more complex than the circuits in your house, with millions or even billions of individual components and connections.
The circuits in your house are relatively large and spread out over a significant distance, while the circuits on a microchip in a computer are incredibly small and tightly packed.
To know more about circuits visit:
brainly.com/question/12608491
A steel bar 22mm x 30mm cross section is loaded axially in tension with F(t): ± 8KN. A 10mm hole passes thru the center of the 30mm side. Find the safety factor for infinite life if the material has σu = 500 Mpa Same as problem But with F(min) 8KN and F(max)-24KN. Find the safety factor for infinite life if the material has σu = 500 Mpa
The safety factor for infinite life is 9.74.
σ = F/A
A = (22 x 30) - (π/4 x 10²) = 660 - 78.54 = 581.46 mm²
σ = ± 8 x 10³/ 581.46 = ± 13.77 MPa
Kt = 1 + 2[tex](d/da)^{0.5}[/tex] + (d/da)²
In this case, d = 10 mm and da = 15 mm (half the width of the bar minus the radius of the hole):
Kt = 1 + [tex]2(10/15)^{0.5}[/tex] + (10/15)²= 2.58
The maximum stress in the bar can then be calculated as:
σmax = Kt x σ = 2.58 x 13.77 = 35.46 MPa
The safety factor for infinite life can now be calculated as:
SF = σu / σmax
where σu is the ultimate tensile strength of the material. In this case, σu = 500 MPa:
SF = 500 / 35.46 = 14.1
Therefore, the safety factor for infinite life is 14.1.
The minimum stress can be calculated in the same way as before:
σmin = -8 x 10³ / 581.46 = -13.77 MPa
The maximum stress can be calculated using the same equation as before, but with F = -24 KN:
σmax = Kt x (-24 x 10³ / 581.46) = -70.92 MPa
To combine the stresses, we use the von Mises criterion:
σVM = ((σmax - σmin)² + 3τ²)^0.5
where τ is the shear stress, which can be calculated as:
τ = F / (2A)
For this problem, τ is equal to:
τ = ± 8 x 10^3 / (2 x 581.46) = ± 6.88 MPa
Therefore, the von Mises stress is:
σVM = ((-70.92 + 13.77)² + 3(6.88)²)[tex]^{0.5 }[/tex]= 51.34 MPa
The safety factor for infinite life can now be calculated as before:
SF = σu / σVM = 500 / 51.34 = 9.74
The safety factor refers to the ratio of the maximum load that a system or structure can withstand to the actual load it experiences. It is a measure of the level of safety or margin of error built into a design to prevent failure or collapse under stress. For example, in engineering, the safety factor is commonly used to determine the strength of materials used in construction, such as bridges or buildings.
A higher safety factor means that the structure can withstand greater stress without failure, providing a greater level of safety. The safety factor is typically determined based on a number of factors, including the materials used, the design of the structure, and the expected loads and stresses that it will experience. A higher safety factor is generally preferred in situations where failure could have serious consequences, such as in aerospace or medical applications.
To learn more about Safety factor visit here:
brainly.com/question/13385350
#SPJ4
neglecting momentum conservation, what is the absolute minimum photon energy needed to create a e e- pair
The absolute minimum photon energy needed to create an e+e- pair is 1.022 MeV, but in reality, the required energy will be slightly higher due to momentum conservation.
To create an electron-positron pair (e+e-), a photon with enough energy is required to exceed the total rest mass of the particles, as well as any binding energy they may have in the atomic or molecular system.
According to Einstein's famous equation E=[tex]mc^2[/tex], mass and energy are interchangeable, and the minimum energy required to create an e+e- pair can be calculated by adding the rest mass energy of the electron (0.511 MeV) and positron (0.511 MeV) together, which equals 1.022 MeV. This means that a photon with energy of at least 1.022 MeV is required to create an e+e- pair, assuming that momentum conservation is neglected.
However, in reality, momentum conservation cannot be neglected. The momentum of the incoming photon must be transferred to the electron-positron pair. This means that the energy of the photon required to create the pair will actually be slightly higher than the rest mass energy of the pair, with the exact value depending on the angle and direction of the pair's motion relative to the photon.
For more such questions on Photon energy.
https://brainly.com/question/31393817#
#SPJ11
a 12.0g rifle bullet is fired with a speed of 380 m/s into aballistic pendulum with mass 6.00kg suspended from a cord 70.0 cmlong.
a) compute the vertical height through which the pendulumrises
b) compute the initial kinetic energy of the bullet
c) compute the kinetic energyof the bullet and pendulumimmediatly after the bullet becomes embedded in the pendulum
A. the vertical height through which the pendulum rises is 0.416 m. B. the initial kinetic energy of the bullet is 866.4 J, and C. the kinetic energy of the bullet and pendulum immediately after the collision is 0.016 J.
a) To compute the vertical height through which the pendulum rises, we can use the conservation of momentum and conservation of energy principles. The momentum conservation equation is:[tex]m_bullet * v_bullet = (m_bullet + m_pendulum) * v_final[/tex]where m_bullet is the mass of the bullet, v_bullet is the initial velocity of the bullet, m_pendulum is the mass of the pendulum, and v_final is the final velocity of the bullet and pendulum after the collision.Using the conservation of energy principle, the initial kinetic energy of the bullet is converted to the potential energy of the bullet and pendulum at the highest point of their swing. So, we can write:[tex](1/2) * m_bullet * v_bullet^2 = (m_bullet + m_pendulum) * g * h[/tex]where h is the vertical height through which the pendulum rises.Solving these two equations simultaneously, we get:[tex]h = (v_bullet^2 / (2*g)) * ((m_bullet + m_pendulum) / m_pendulum)\\\\h = (380^2 / (2*9.81)) * ((0.012 + 6.00) / 6.00)\\\\h = 0.416 m[/tex]Therefore, the vertical height through which the pendulum rises is 0.416 m.b) The initial kinetic energy of the bullet can be calculated using the formula:[tex]KE = (1/2) * m_bullet * v_bullet^2[/tex][tex]KE = (1/2) * 0.012 * (380)^2[/tex]KE = 866.4 JTherefore, the initial kinetic energy of the bullet is 866.4 J.c) After the bullet becomes embedded in the pendulum, the combined system of bullet and pendulum moves with a common velocity, which we can calculate using the principle of conservation of momentum. The momentum conservation equation is:[tex]m_bullet * v_bullet = (m_bullet + m_pendulum) * v_final[/tex]where v_final is the final velocity of the bullet and pendulum after the collision.Solving for v_final, we get:[tex]v_final = (m_bullet * v_bullet) / (m_bullet + m_pendulum)[/tex]v_final = (0.012 * 380) / (0.012 + 6.00)v_final = 0.236 m/sThe kinetic energy of the bullet and pendulum immediately after the collision is given by:[tex]KE_final = (1/2) * (m_bullet + m_pendulum) * v_final^2[/tex][tex]KE_final = (1/2) * (0.012 + 6.00) * (0.236)^2[/tex]KE_final = 0.016 JTherefore, the kinetic energy of the bullet and pendulum immediately after the collision is 0.016 J.For more such question on kinetic energy
https://brainly.com/question/8101588
#SPJ11
If the total resistance of the circuit shown is 15 ohms, and the resistance of R1 is 10 ohms, then what must the resistance in R2 be?
Answer:
5.0 ohms is the answer
Explanation:
(why was my answer deleted????????)
You want your anmeter to have high or low resistance?
A) high
B) low
The answer will be low. An ammeter should have low resistance so it does not significantly affect the circuit's current flow while measuring it.
In a long answer, it is important to understand the concept of resistance in an ammeter. An ammeter is a device used to measure the electric current flowing through a circuit. However, the ammeter itself can affect the circuit by introducing its own resistance. This is known as the internal resistance of the ammeter.
When selecting an ammeter, it is important to choose one with a low internal resistance. This is because a high internal resistance will alter the current flowing through the circuit being measured. This alteration can result in inaccurate readings, which can cause problems in troubleshooting the circuit.
To know more about resistance visit :-
https://brainly.com/question/13258713
#SPJ11
Given an electrical circuit with a driving voltage of 12 Volts and a resistance of 10 Ohms, how much current does the circuit produce?
A) 1.2 Amperes
B) 1.5 Amperes
C) 2 Amperes
D) 0.2 Amperes
To calculate the current produced by an electrical circuit, we can use Ohm's Law, Therefore, the circuit produce A current of 1.2 amperes . So the answer is A) 1.2 Amperes.
To determine the current, we can use Ohm's Law, which states that the current (I) in a circuit is equal to the voltage (V) divided by the resistance (R). Mathematically, this can be expressed as:
I = V/R
Given the values in the question, we have a voltage (V) of 12 Volts and a resistance (R) of 10 Ohms. Plugging these values into the equation, we get:
I = 12V / 10Ω
I = 1.2 Amperes
So, the correct answer is:
A) 1.2 Amperes
The electrical circuit produces a current of 1.2 Amperes when given a driving voltage of 12 Volts and a resistance of 10 Ohms.
Learn more about Ohm's Law here:
https://brainly.com/question/1247379
#SPJ11
True or false? Lenses focus light by reflecting the light rays
The statement is False. Lenses do not focus light by reflecting the light rays.
Lenses are transparent objects made of materials such as glass or plastic that are used to refract or bend light. The primary function of lenses is to focus light, which is why they are commonly used in many optical devices such as cameras, telescopes, microscopes, and eyeglasses.
Lenses work by changing the direction of light as it passes through them, causing the light rays to converge or diverge. There are two main types of lenses: convex lenses, which are thicker in the middle and cause light rays to converge, and concave lenses, which are thinner in the middle and cause light rays to diverge. Convex lenses are used in devices that require magnification, such as telescopes and microscopes, while concave lenses are used to correct vision problems such as nearsightedness.
To learn more about Lenses visit here:
brainly.com/question/28025799
#SPJ4
Solve problem 4 and 5
4. Weight A must be placed 1 ft from the center of gravity, towards the end of the plank with weight B. 5. The tension force in the angled cable is found to be -1730.85 N, which indicates that it pulls the beam towards the wall instead of away from it. This is due to the weight of the hanging object being greater than the weight of the beam, causing the beam to rotate in the opposite direction.
4. To balance the plank and the additional weight B, the torques on either side of the pivot point must be equal. Torque is the product of force and distance from the pivot point, and it is measured in units of pound-feet (lb-ft).
Let x be the distance from the center of gravity to weight A, measured in feet. The torque created by the weight of the plank is:
torque_plank = (85 lb) * (8 ft) = 680 lb-ft
The torque created by the additional weight B is:
torque_B = (20 lb) * (8 ft + 3 ft) = 260 lb-ft
To balance these torques, the torque created by weight A must be:
torque_A = torque_plank - torque_B
torque_A = 680 lb-ft - 260 lb-ft
torque_A = 420 lb-ft
The torque created by weight A is the product of its weight and its distance from the pivot point, which is (16/2 - 3 - x) ft. Therefore:
torque_A = (A lb) * (16/2 - 3 - x ft)
We can now solve for x:
420 lb-ft = (A lb) * (16/2 - 3 - x ft)
420 lb-ft = (A lb) * (5 - x ft)
x ft = 5 ft - 420 lb-ft / A lb
We also know that the total weight on the far end of the plank is 85 lb + 20 lb = 105 lb, and its distance from the pivot point is 16/2 + 3 ft = 11 ft. Therefore:
(105 lb) * (11 ft) = (A lb) * (x ft)
Substituting the expression for x derived earlier, we get:
(105 lb) * (11 ft) = (A lb) * (5 ft - 420 lb-ft / A lb)
Simplifying and solving for A, we get:
A = 168 lb
Therefore, weight A must be placed 1 ft from the center of gravity, towards the end of the plank with weight B.
5. To solve this problem, we will use the principle of moments, which states that for a body to be in equilibrium, the sum of the clockwise moments about any point must be equal to the sum of the anticlockwise moments about that same point.
Let's consider the point where the beam is placed at the wall as our point of reference. The beam exerts a clockwise moment and the hanging object exerts an anticlockwise moment. The tension force in the angled cable also exerts an anticlockwise moment. Therefore, we can write:
clockwise moment = anticlockwise moment
The clockwise moment is due to the weight of the beam acting at its center of mass, which is 2.1 m from the wall:
clockwise moment = (35 kg) * (9.81 m/s^2) * (2.1 m) = 726.09 Nm
The anticlockwise moment due to the hanging object is:
anticlockwise moment = (110 kg) * (9.81 m/s^2) * (4.2 m) = 4517.88 Nm
Let T be the tension force in the angled cable. The anticlockwise moment due to this force is:
anticlockwise moment = T * (4.2 m - 2.1 m) = 2.1T Nm
Therefore, we can write:
clockwise moment = anticlockwise moment
726.09 Nm = 4517.88 Nm + 2.1T Nm
Solving for T, we get:
T = (726.09 Nm - 4517.88 Nm) / (2.1 m)
T = -1730.85 N
The negative sign indicates that the tension force in the cable acts in the opposite direction to what is shown in the diagram, i.e. it pulls the beam toward the wall instead of away from it. This is because the weight of the hanging object is greater than the weight of the beam, causing it to rotate in the opposite direction.
Therefore, 4. Weight A must be positioned at the end of the plank with weight B, one foot from the center of gravity. 5. It is discovered that the angled cable has a tension force of -1730.85 N, indicating that it pushes the beam toward the wall rather than away from it. This happens because the weight of the hanging object is heavier than the weight of the beam, which causes the beam to rotate anticlockwise.
To learn more about the Center of gravity click:
https://brainly.com/question/20662235
#SPJ1
A girl accelerates down a slide with a coefficient of friction equal to 0.10. What forces are responsible for her acceleration?
The forces responsible for the girl's acceleration down the slide are gravity and friction. Gravity pulls the girl downwards, while friction, with a coefficient of 0.10, opposes her motion and slows her acceleration.
The forces responsible for the girl's acceleration down the slide include both a gravitational force and a frictional force. The gravitational force is responsible for pulling the girl down the slide, while the frictional force is responsible for opposing the girl's motion down the slide.
The gravitational force is directly proportional to the mass of the girl, and it is directed downwards towards the center of the earth. This force acts on the girl regardless of whether she is on the slide or not.
The frictional force, on the other hand, is a force that opposes the motion of the girl down the slide.
The coefficient of friction (0.10 in this case) is a measure of the frictional force between two surfaces in contact. It is dependent on the materials that the surfaces are made of, as well as the roughness of the surfaces.
In this case, the frictional force between the girl and the slide is proportional to the normal force acting on the girl. The normal force is a force that is perpendicular to the surface of the slide, and it acts to counteract the force of gravity. As the girl accelerates down the slide, the normal force decreases, which in turn decreases the frictional force.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ11
if in the future, the amount of greenhouse gases in the atmosphere rise so that 10% less of the ir radiation emitted from the earth's surface is getting out through the atmosphere than at present, calculate how many degrees kelvin hotter the surface of the earth would be?
The surface of the Earth would be hotter by a certain amount of degrees Kelvin due to increased greenhouse gases in the atmosphere.
Greenhouse gases trap heat in the Earth's atmosphere, preventing some of the infrared (IR) radiation emitted by the Earth's surface from escaping into space. If the amount of greenhouse gases in the atmosphere increases such that 10% less IR radiation is able to escape compared to the present, it would result in an increased retention of heat in the atmosphere, leading to a warming effect on the Earth's surface.
The exact calculation of how many degrees Kelvin hotter the surface of the Earth would be would require detailed knowledge of the current greenhouse gas levels, the properties of the gases, and other factors, and would require a complex modeling approach.
Learn more about Earth's surface at: https://brainly.com/question/11154979
#SPJ11
suppose two dipoles are separated by a distance r in the following configuration noting that d << r. indicate if the net force between the two dipoles is attractive, repulsive, or zero
A dipole is a separation of opposite electrical charges. A dipole is quantified by its dipole moment (μ). A dipole moment is the distance between charges multiplied by the charge
To determine if the net force between two dipoles separated by a distance r (with d << r) is attractive, repulsive, or zero, we need to consider their orientations and interactions.
Step 1: Identify the orientation of the two dipoles. Are they aligned parallel or antiparallel, or are they perpendicular to each other?
Step 2: Calculate the forces between the individual charges of the two dipoles. Use Coulomb's law to determine the electrostatic forces acting between each pair of charges (positive-positive, positive-negative, negative-positive, and negative-negative).
Step 3: Determine the net force between the two dipoles by summing up the forces calculated in Step 2. Make sure to account for the direction of the forces.
Step 4: Analyze the resulting net force. If it's positive, the force is repulsive; if it's negative, the force is attractive; and if it's zero, there is no net force acting between the dipoles.
By following these steps and taking into account the specific configuration of the dipoles, you can determine if the net force between them is attractive, repulsive, or zero.
learn more about "Dipoles":-https://brainly.com/question/11626115
#SPJ11