Answer:
35.47 m/s
Explanation:
[tex]r = \sqrt{( - 23)^{2} + (27) ^{2} }[/tex]
=35.57
please help
Which equipment is best to hold and to measure liquids?
A). flask and graduated cylinder
B). scale and ruler
C). caliper and thermometer
D). stopwatch and beaker
Answer:
I'm pretty sure that the answer is A
Biomes on Earth have exhibited changes throughout history that have been caused by a variety of factors. Over the past 50 years, the amount of tropical rainforest acreage found throughout the world has decreased from 14.8 billion acres to 8.6 billion acres due to deforestation. What factor is likely most responsible for the changes observed in the world's rainforests? a. volcanic activity b. human activity c. temperature changes d. solar eclipses Please select the best answer from the choices provided A B C D
Answer:
b
Explanation:
The factor that is most likely to be responsible for the changes observed in the world's rainforest is human activities.
There has been a surge in the human population leading to an increased need for housing, foods, and other infrastructures. All these needs are directly or indirectly provided by the forest. Hence, the more the population of human expands, the more pressure that would be exerted on the rainforest and, indeed, other forests of the world.
The correct option is b.
How are velocity, wavelength, and frequency related
Answer:
The wave velocity and the wavelength are related to the wave's frequency and period by vw=λT or vw=fλ. The time for one complete wave cycle is the period T. The number of waves per unit time is the frequency ƒ. The wave frequency and the period are inversely related to one another.
Explanation:
What the meaning of centerpiece
Answer:
1 : an object occupying a central position especially : an adornment in the center of a table. 2 : one that is of central importance or interest in a larger whole the centerpiece of a political agenda.
Explanation:
which one of the following is a derived Si unit a. Newton, b. Meter, c. Mole, d. Kiogram
Answer:
The SI is founded on seven SI base units for seven base quantities assumed to ... The SI derived units for these derived quantities are obtained from these ... mass density, kilogram per cubic meter, kg/m3 ... amount-of-substance concentration, mole per cubic meter, mol/m3 ... solid angle, steradian (a), sr (c), -, m2·m-2 = 1 (b).
Kilogram is a derived SI unit of the following.
Thus, A universal standard for expressing the magnitudes or quantities of significant natural events is the International System of Units.
The acronym SI, which derives from the French term Systèm international stands for the System of Units, also known as the metric system. The meter-kilogram-second (MKS) system, an earlier unit of measurement, serves as the foundation for the SI standard.
The SI standard is promoted and explained by the Bureau international des poids et mesures (BIPM). The organization was founded in 1875 and is known as the International Bureau of Weights and Measures in English. It is governed by the International Committee for Weights and Measures (CIPM).
Thus, Kilogram is a derived SI unit of the following.
Learn more about Kilogram, refer to the link:
https://brainly.com/question/29761698
#SPJ2
Which words help you to determine the meaning of the word decelerate in paragraph 3
Answer:
the words
Explanation:
Answer:
Pressing the brake pedal
Explanation:
Decelerate sounds a lot like the word accelerate, but we know that the speed is decreasing, so it would have to be going down, getting slower, so whichever sounds like a good example of speed decreasing should be a good answer!
4. A cylindrical tube has a length of 14.4cm and a radius of 1.5cm and is filled with a colorless gas. If the density of the gas is known to be 0.00123g/cm', what is the mass of the gas in the tube in mg?
Answer:
Mass, m of gas is 0.2504 grams.
Explanation:
First, we need to solve for the volume of the cylindrical tube.
Volume of cylinder is given by the formula;
[tex] V = 2\Pi r^{2}h[/tex]
Where, V represents volume.
π represents pie
r represents radius.
h represents height or length.
Given the following data;
Radius, r = 1.5cm
Length, h = 14.4cm
Density, d = 0.00123g/cm³
Substituting into the equation;
[tex] V = 2 * 3.142 * (1.5)^{2}14.4[/tex]
[tex] V = 2 * 3.142 * 2.25 * 14.4[/tex]
[tex] V = 203. 6016[/tex]
Therefore, the volume of the cylindrical tube is 203. 6016cm³
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the formula;
[tex]Density = \frac{mass}{volume}[/tex]
[tex] Mass = density * volume [/tex]
Substituting into the equation, we have;
[tex] Mass = 0.00123 * 203. 6016 [/tex]
Mass = 0.2504g.
A car travels at a constant speed of 70 km/hr for 15 minutes. The car decreases its speed from 70 to 40 km/hr over the next two minutes and then continues to travel at a constant speed of 40 km/hr for the next 5 minutes Which of the following graphs best represents the car's motion during the given time period?
Answer:
A car travels at a constanT
#7 If the Moon’s mass was suddenly tripled, what would occur to the gravitational force between the Earth and the Moon?
(A) Gravitational force would increase by a factor of 3.
(B) Gravitational force would decrease by a factor of 3.
(C) Gravitational force would increase by a factor of 9.
(D) Gravitational force would decrease by a factor of 9.
Answer:
well it would be (A) Gravitational force would increase by a factor of 3.
Explanation:
because the moon is the only thing that gained mass not the Earth
What type of bond is shown in the figure?
Answer:
ionic
Explanation:
A toy car rolls down a hill starting from rest. After 4.2 seconds its velocity is 18 meters per second. What is the acceleration of the car ?
SOMEONE PLZ HELP :(
WILL MARK BRAILIEST
Answer: if this is the same question I think it’s 24
Explanation:
If an object is moving with constant acceleration, its velocity must
a
change by varying amounts depending on its speed.
b
always decrease.
c
be constant also.
d
change by the same amount each second.
why are force and velocity different?
Answer: If you apply force to an object the velocity changes. But it doesn't work the other way around apply velocity and the force (no!) Velocity does not change on an object. A force pushes or pulls on an object, but velocity is simply something an object has I hope this makes sense to you. Hope this helps :)
Explanation:
Define what velocity means.
Answer:
The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).
PLEASE HELP THIS IS DUE IN 10 MINUTES- (15 points!)
1st question- what are the weather fronts(use the pic for help)
2nd question- who has better weather— high pressure systems or low pressure systems and how do you know?
(Please add explanation)<3
Answer: I would say that B would have better weather because those dots on the right are cold fronts and the smooth side without the dots is a warm front. I hope this helps :)
Explanation:
If a racer maintained a constant speed, during which sections of the race would the racer's velocity be the same?
Sections 1 and 2
Sections 2 and 3
Sections 2 and 4
Sections 3 and 4
pls help!!
Answer:
Sections 3 and 4
Explanation:
The correct answer would be sections 3 and 4.
The velocity of an object is the speed of the object in a particular direction. In this case, the speed of the racer is constant irrespective of the distance or the direction. Hence, the sections of the race during which the racer's velocity would be the same would be the sections in which the racer faces the same direction - which is sections 3 and 4.
Dos pilotos suicidas, que están inicialmente a una distancia de 500 m entre sí, deciden chocar directamente de frente arrancando ambos desde el reposo. Ambos autos pueden desarrollar una aceleración máxima constante de 15 m/s2 . Si el piloto A arranca un segundo antes que el piloto B, encuentra: a) la posición donde los autos chocan, medida a partir de la posición donde arranca el piloto A, y b) la rapidez relativa de la colisión (la rapidez de B con respecto a A justo antes de la colisión, ó viceversa).
Answer:
a) El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A es de aproximadamente 293,14 metros.
b) La velocidad del automóvil A, en relación con la velocidad del automóvil B, es de 15 m / s
Explanation:
Los parámetros del movimiento son;
La distancia entre ambos coches = 500 m
La aceleración de ambos coches = 15 m / s²
La dirección de movimiento de ambos coches = uno hacia el otro
La hora de inicio del conductor A = Un segundo antes de la hora de inicio del conductor B
Por lo tanto, de la ecuación de movimiento, tenemos;
s = u · t + 1/2 · a · t²
v² = u² + 2 · a · s
Dónde;
u = La velocidad inicial de los autos = 0 (los autos parten del reposo)
t = El tiempo de movimiento de una aceleración dada
a = La aceleración = 15 m / s²
s = La distancia recorrida en el tiempo t
Por lo tanto, para el controlador A, tenemos;
s₁ = 0 × (t + 1) + 1/2 × 15 × (t + 1) ² = 7.5 × (t + 1) ²
s₁ = 7.5 × (t + 1) ²
Para el conductor B, tenemos;
s₂ = 0 × t + 1/2 × 15 × t² = 7.5 × t²
s₂ = 7,5 × t²
Dado que ambos chocan a lo largo del camino de 500 m, tenemos;
s₁ + s₂ = 500 metros
∴ 7.5 × (t + 1) ² + 7.5 × t² = 500
∵ s₁ + s₂ = 7.5 × (t + 1) ² + 7.5 × t²
Lo que da;
15 · t² + 15 · t + 7.5 = 500
15 · t² + 15 · t - 492,5 = 0
Resolver usando la aplicación en línea da; t = -6,25181 o t = 5,25181
Dado que t es un número natural, tenemos el valor correcto para t = 5.25181 segundos
a) Por tanto, el punto de colisión de los dos coches desde donde parte el conductor del coche A es;
s₁ = 7.5 × (t + 1) ² = 7.5 × (5.25181 + 1) ² ≈ 293.14 metros
El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A ≈ 293,14 metros
b) La semilla de A en el punto de colisión se da de la siguiente manera
Velocidad, v₁ = u + a × (t + 1) = 0 + 15 × (5.25181 + 1) ≈ 93.78
v₁ ≈ 93,78 m / s
La semilla de B en el punto de colisión también se da de la siguiente manera
Velocidad, v = u + a × (t) = 0 + 15 × 5.25181 ≈ 78.78
v₁ ≈ 78,78 m / s
Por lo tanto, la velocidad del automóvil A, en relación con la velocidad del automóvil B, [tex]v_{relative}[/tex] se da como sigue;
= v₁ - v₂ = 93,78 m / s - 78,78 m / s = 15 m / s
la velocidad del automóvil A, relativa a la velocidad del automóvil B = 15 m/s.
Determine the average speed of an object that travels 200 miles in 4 hours.
Answer:
The average speed is 50 miles per hour
Explanation:
Speed is equals to distance divided by time
Then substitute your variables into the equation
Hope this helps
please mark as brainliest
The photo shows dew drops that formed on the grass when temperatures
cooled during the night. Which change of state happened to form the dew?
A. Liquid to gas
B. Gas to liquid
C. Solid to gas
D. Gas to solid
An object moves 120 m in 15 seconds. Calculate
the object's speed.
Answer:
8m/s
Explanation:
speed= distance/time
s= 120/15
= 8m/s
Where would the net force acting on a charge placed in a system of like charges be zero?
Answer:
If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.
List out Units For: Acceleration
Unit for Acceleration is m/s² or ms raised to -2
Eclipses occur because the Moon?
A
does not create its own light and only reflects light from the Sun.
o
does not create its own light and only reflects the light from Earth.
o
с
creates its own light, which is blocked by the Sun during an eclipse.
creates its own light, which is blocked by Earth during an eclipse.
Answer:
с
creates its own light, which is blocked by the Sun during an eclipse.
Explanation:
might not be right but its what i remember
what does the galaxy made of ?
Why does sonar use ultrasound rather than sound?
Answer; Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances.
Answer:
Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances
Explanation:
Lucy and JoJo need to make 140 cupcakes for the school dance. Lucy made 35 of the cupcakes. JoJo made 42 cupcakes What fraction of the cupcakes do Lucy and JoJo still need to make?
Answer:
9/20
Explanation:
According to this question, Lucy and JoJo need to make 140 cupcakes for the school dance. Lucy made 35 of the cupcakes while JoJo made 42 cupcakes. This means that in total, (42 + 35) cupcakes has been made by both Lucy and JoJo
That is, 77 cupcakes out of 140 has been made. This is 77/140 i.e. 11/20
Since 77/140 cupcakes has been made, Lucy and JoJo still need to make;
140 - 77 = 63 cupcakes to meet up their target for the school dance.
This means that the fraction left is 63/140
63/140 in its lowest term is 9/20
Hence, 9/20 of the cupcakes still need to be made by Lucy and JoJo.
Explanation: 140 - 35 = 105 - 42 = 63
yare yare daze
I use tusk act 4 main
A force of 75 N at an angle of 15° to the direction of motion moves a chair 3 m. Which change would result in more work being done on the chair?
Answer:
Decreasing the angle to 10
Explanation:
Edge 2020
Which model of the atom has electrons traveling in specific paths around the nucleus? Bohr's model Rutherford's model Thomson's model Dalton's model
Answer:
A, Bohr's model
Explanation:
Took the quiz, hope it's right for you.
(The other three did have something to do with it they just didn't create that specific model)
The model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
J. J Thomson proposed that the atom is a sphere of positively charged matter in which negatively charged electron are embedded.
In Rutherford's model of atomic structure, the electrons moves in orbits by electrostatic attraction to the positively charged nucleus.
According to Dalton's atomic theory, atom were indestructible and indivisible solid particle.
Bohr's model made assumption that electron can only exist in circular orbits of definite quantum energy.
According to the question, the model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
Learn more here : https://brainly.com/question/16776207
A 10 kg box is resting on the table. What is the normal force on the box?
Answer:
normal force and gravitational force are equal. change kg to newtons
98N
Explanation:
The normal force on the box resting on the table is 98 N.
The given parameters;
mass of the box, m = 10 kgThe normal force on the box resting on the table is the force acting perpendicular to the box and it is calculated as follows;
Fₙ = mg
where;
m is the mass of the boxg is the acceleration the to gravityFₙ = 10 x 9.8
Fₙ = 98 N
Thus, the normal force on the box resting on the table is 98 N.
Learn more here:https://brainly.com/question/14486416
Which of the following statements about the technique of hypnotic regression is not true?
O Recovered memories are not reliable.
Courts often depend upon recovered memories.
O Memories may be planted by the hypnotist.
The process may create stress for the subject.
Answer:
B. is the correct answer just took the topic review.
Explanation:
Edge2020. Hope that this helps! Peace and Love
Courts often depend upon recovered memories is the wrong statement about the hypnotic regression.
What is hypnotic regression?Hypnotic regression is a contentious method because it can have a number of negative effects on the subjects who undergo it. For the beginners, the memories recovered through any regression can be doubtful and not trust-worthy. All the suggestions or leading questions from the hypnotist or other people of witnesses can affect the memory.
The previous lives memories will be found by the hypnotic technique as a past life regression. If they used to remember the past life by this method they have high chance of getting into the traumas.
Regression therapy mostly used to identify the cause of your current thoughts and reactions. Therapists who is using this techniques to access subconscious memories that are guiding your current behaviour.
Regression therapy is a method of treatment that could approach and focuses on resolving particular past events that are thought to be interfering or relatable with a person's current mental and emotional well-being.
Hence, Option B is the correct answer.
Learn more about Hypnotic regression,
https://brainly.com/question/14703250
#SPJ6