Answer:
B. Molarity will decrease
Explanation:
Molarity is one of the measures of the molar concentration of a solution. It is calculated by dividing the number of moles of the solute by the volume of the solvent. This means that the higher the amount of solute in relation to the volume of solvent, the higher the molarity of that solution.
In essence, adding water to a solution dilutes it i.e it increases the solvent's volume in relation to the solute, causing the molarity to decrease. In a nutshell, diluting a solution (by adding water or more solvent) causes the molarity of such solution to decrease. For example, if water is added to a 0.70 molar solution of CuSO4, the molarity of the solution will DECREASE.
4) How many atoms are present in a sample of oxygen, O2 with 12.222 moles?
Answer:
two oxygen atoms
questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize
Answer:
d
Explanation:
the partial charges of the molecule
Please help I’ll even give you brainliet
What is the molecular formula for a compound that is 34.31% sodium, 17.93% carbon, 47.76% oxygen and has a molar mass of 134.00g?
Answer: Na2C2O4 probably sodium oxalate
Explanation: assume you have 100 g substance.
Mass of Na is m(Na) = 34.31 g, m(C) = 17.93 g and m(O) = 47.76 g.
Calculate moles n(Na) = 34.31 g/22.99 g/mol= 1.49 mol.
For C n(C) = 1.49 mol and n(O) = 2.985. You divide all by 1.49 you
Get n(Na) : n(C) : n(O) = 1:1:2 M(NaCO2) = 67 g/mol.
Divide 134:67 = 2. You get formula Na2C2O4
Find the pH of a solution containing [H+]=0.00003
Answer:
Acid
Explanation:
because acid has a pH of6_1
PLEASE HELP!!!!!!!! I DO NOT UNDERSTAND
Answer:
A, B, C
Explanation:
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
Explain what you discovered from the Simulation about why food coloring spreads faster in warmer water.
Answer:
The food colouring mixes through the hot water faster than it mixes with the cold water, this is because in hot water the water molecule have more energy and are moving faster than the molecules of cold water .This makes it easier for the food colouring to get mixed quickly through the hot water.
Why are most anions basic in H2O? Give formulas of four anions that are not basic.
Answer:
The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.
Explanation:
connect them, dont guess please + 23 points
Answer:
Astronaut- highly trained individual for space travel
Payload Specialist- partnering scientist, journalist, or political guest.
Space Sickness- nausea, vomiting, and upset stomach.
Muscle Atrophy- the result of microgravity.
Johnson Space Center- training facility for U.S. astronauts.
Can you help me please
Answer:
Explanation:
h
What is the atomic number of the following element??
Answer:
91
Explanation:
Which is an energy source for a coyote?
Answer:
The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.
hopefully this is right :))
Answer:
sun
Explanation:
A solution of 1.8274g of a polypeptide in 274mL of a aqueous solution has an osmotic pressure at 31.40 degrees C of 2.012 mmHg. The approximate molecular weight of this polymer is _____ g/mol.
Answer: Hence, the approximate molecular weight of the poymer is 64106 g/mol
Explanation:
[tex]\pi=CRT[/tex]
where,
[tex]\pi[/tex] = osmotic pressure of the solution = 2.012 mm Hg = 0.0026 atm
i = Van't hoff factor = 1 (for non-electrolytes)
Mass of solute (polypeptide) = 1.8274 g
Volume of solution = 274 mL
R = Gas constant = [tex]0.0821Latm/Kmol[/tex]
T = temperature of the solution = [tex]31.40^0C=(273+31.40)K=304.4K[/tex]
Putting values in above equation, we get:
[tex]0.0026=\frac{1.8274 g\times 1000}{M\times 274ml}\times 0.0821\times 304.4[/tex]
[tex]M=64106g/mol[/tex]
Hence, the approximate molecular weight of the poymer is 64106 g/mol
A block of concrete has a mass of 5100 g and a volume of 2500 cm3 . Calculate the density.
Answer:
2.04 g/cm3
Explanation:
Density = mass ÷ volume
= 5100 ÷ 2500
=2.04 g/cm3
What is an important effect of gravity?
Answer:
pulling objects with mass closer to each other
Explanation:
that is the only role of gravity
WDYT a mixture is? Please help
Answer:
A mixture is when two substances are physically combined and can be taken apart.
Explanation:
my words
Which of the following best describes the difference between metals and nonmetals?
a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.
Answer:
the answer is d.
Explanation:
because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.
In a lab, a scientist calculate he should produce 12.3 grams of product in his experiment. When he is finished collecting his product it weighs 11.0 grams. What is his percent yield?
Answer:
Option D.
Explanation:
Percentage yield = Actual yield / Theoretical yield * 100%
Actual yield = 11.0 grams
Theoretical yield = 12.3 grams
Percentage yield = 11.0 / 12.3 * 100
Percentage yield = 89.43%
which process helps guarantee that a species continues to involve over hundreds of years?
A. growth
B. nutrition
C. reproduction
Answer:
C. reproduction
Explanation:
A gas has a solubility of 1.46 g L at 8.00 atm of pressure. What is the pressure of a sample of the same gas that
contains 2.7 g/L of the dissolved gas?
Answer:
[tex]14.8\ \text{atm}[/tex]
Explanation:
[tex]C_1[/tex] = Initial concentration = 1.46 g/L
[tex]C_2[/tex] = Final concentration = 2.7 g/L
[tex]P_1[/tex] = Initial pressure = 8 atm
[tex]P_2[/tex] = Final pressure
From Henry's law we have the relation
[tex]\dfrac{C_2}{C_1}=\dfrac{P_2}{P_1}\\\Rightarrow P_2=\dfrac{C_2}{C_1}P_1\\\Rightarrow P_2=\dfrac{2.7}{1.46}\times 8\\\Rightarrow P_2=14.8\ \text{atm}[/tex]
The pressure of a sample of the same gas at the required concentration is [tex]14.8\ \text{atm}[/tex].
I NEED HELP PLS PLS PLS
A mixture of Oxygen and Hydrogen occupies a pressure of 101.3kPa. The pressure of Hydrogen is 56kpa. Calculate the pressure of oxygen.
Answer:
45.3 KPa
Explanation:
From the question given above, the following data were obtained:
Total pressure (Pₜ) = 101.3 KPa
Pressure of Hydrogen (Pₕ) = 56 KPa
Pressure of Oxygen (Pₒ) =?
The pressure of oxygen in the mixture can be obtained as follow:
Pₜ = Pₕ + Pₒ
101.3 = 56 + Pₒ
Collect like terms
101.3 – 56 = Pₒ
Pₒ = 45.3 KPa
Thus, the pressure of oxygen in the mixture is 45.3 KPa
Characteristics of a substance that describe its' ability to change into a different substance are called?
Question number 12 I need help
Answer: Its B.
Explanation:
i cant quite explain
Which statement best describes the polarity of the molecule Sil4?
Answer:
I dont a picture
Explanation:
but the answer is 24
From point A to point B, the car will . From point B to point C, the car will . Assuming the washer on the car is not blocked by the book, once the car hits the book, the washer will still have . This experimental design will examine Newton’s law.
Answer:
Accelerate, Have Constant velocity, Velocity, and First
Explanation:
Got it right on edge. have a wonderful day!!!
From point A to point B, the car will . From point B to point C, the car will assuming the washer on the car is not blocked . It will examine Newton’s law will be "Accelerate, Have Constant velocity, Velocity, and First."
What is Newton’s law ?The link between an object's motion with even the forces acting on it is outlined by Newton's laws of motion, which were three fundamental principles of classical mechanics.
What is velocity?The displacement of the item in one unit of time would be the definition of velocity.
Therefore, from point A to point B, the car will . From point B to point C, the car will assuming the washer on the car is not blocked . It will examine Newton’s law will be "Accelerate, Have Constant velocity, Velocity, and First."
To know more Newton’s law and Velocity
https://brainly.com/question/27573481
#SPJ3
Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?
Answer:
C: 1 mol F2/38 g F2
Explanation:
The reaction equation is;
N2 + 3F2 = 2NF3
Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;
105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2
Option C is Thus correct
The Olympian swam 200 meters in 20 seconds.
1) velocity
2) acceleration
3) speed
Answer: velocity
Explanation:
Form of energy knows as light energy
A clownfish uses a sea anemone as a safe place to live. While living there, the clownfish lures in food for the anemone. This is an example of what type of relationship?