If you declare a pointer to the object of the parent class and use the pointer to access the object of a child class, you can access the member variables and member functions of both the parent and child class.
However, if the member function is overridden in the child class, the version of the function in the child class will be called instead of the version in the parent class. This is because the pointer points to the child object and the compiler will use the most derived class's version of the function.
When you declare a pointer to the object of the parent class and use the pointer to access the object of a child class, you can access the inherited members and overridden functions of the child class through the parent class pointer. This is an example of polymorphism in object-oriented programming.
To know more about member variables, click here:
https://brainly.com/question/13127989
#SPJ11
When you declare a pointer to the object of the parent class and use it to access the object of a child class, you are essentially creating a base class pointer that points to a derived class object. This is known as "polymorphism" in object-oriented programming.
For such more questions on polymorphism
https://brainly.com/question/20317264
#SPJ11
you are working in hyper-v manager on a system that hosts several windows server 2008 r2 virtual machines. you create snapshots of these virtual machines nightly as part of your disaster recovery plan. users are complaining that they can no longer access the virtual servers. in hyper-v manager, they are identified as being in a paused-critical state. what should you do? (select two. each answer is a part of the overall solution.)
1. Unpause the virtual machines: In Hyper-V Manager, right-click on the paused virtual machine and select "Resume" to unpause it. This should allow users to access the virtual servers again.
2. Investigate the cause of the critical state: Check the Event Viewer on the host machine and the virtual machines to see if there are any error messages or warnings that could explain why the virtual machines were paused in a critical state. Address any underlying issues to prevent this from happening again in the future.
To address the issue of virtual servers being in a paused-critical state in Hyper-V Manager, you should try two solutions:
Attempt to resume the virtual machines from the paused-critical state.If resuming fails, then you should revert to the most recent snapshot of each virtual machine to restore their previous states.When virtual servers are in a paused-critical state, it means that the virtual machine has been paused due to a critical error or issue, and it cannot continue running until the issue is resolved. This is why users are unable to access the virtual servers. To address this issue, you can try to resume the virtual machines from the paused-critical state.
If this doesn't work, then you should consider reverting to the most recent snapshot of each virtual machine to restore their previous states. Reverting to the most recent snapshot is a common solution when there is a critical issue with the virtual machine, as it allows you to roll back to a previous state when the virtual machine was functioning correctly.
However, it's important to note that reverting to a snapshot will erase any changes made to the virtual machine since the snapshot was taken.
For more questions like Servers click the link below:
https://brainly.com/question/30168195
#SPJ11
the sustainable growth rate is computed as roe × b when equity used is at the ______ of the period.
Beginning
The sustainable growth rate is computed as ROE × b when equity used is at the "beginning" of the period.
To clarify, the sustainable growth rate is the maximum rate at which a company can grow without using external financing. It is calculated by multiplying the return on equity (ROE) by the retention ratio (b), which is the portion of earnings retained by the company rather than being paid out as dividends. In this calculation, the equity used is considered at the beginning of the period to determine the growth rate.
Growth rates are the percent change of a variable over time. It can be applied to GDP, corporate revenue, or an investment portfolio. Here's how to calculate growth rates. The annual return is the compound average rate of return for a stock, fund, or asset per year over a period of time.
Return on equity (ROE) is a measure of financial performance calculated by dividing net income by shareholders' equity. Because shareholders' equity is equal to a company's assets minus its debt, ROE is considered the return on net assets. The ROE ratio is calculated by dividing the net income of the company by total shareholder equity and is expressed as a percentage. The ratio can be calculated accurately if both net income and equity are positive in value. Return on equity = Net income / average shareholder's equity.
Learn more about ROE: https://brainly.com/question/27821130
#SPJ11
The Default Domain Policy is linked to the domain object and specifies default settings that affect all users and computers in the domain.
True or false
True, the Default Domain Policy is linked to the domain object and specifies default settings that affect all users and computers in the domain.
Computers are electronic devices that process, store, and transmit data and information. They are capable of performing a wide range of tasks, from simple calculations to complex simulations and data analysis. Computers consist of various hardware components, such as a central processing unit (CPU), memory, storage, input/output devices, and network interfaces. Software programs, including operating systems, applications, and utilities, allow users to interact with computers and perform tasks such as word processing, web browsing, and video editing. Computers have become an integral part of modern life, used for work, entertainment, communication, and education. Advances in computer technology have led to the development of mobile devices, artificial intelligence, and the internet, changing the way people interact with technology and each other.
Learn more about computers here:
https://brainly.com/question/15707178
#SPJ11
The statement "The Default Domain Policy is linked to the domain object and specifies default settings that affect all users and computers in the domain" is true. The Default Domain Policy sets the baseline security settings for users and computers in the domain, and it is linked to the domain object.
The Default Domain Policy is a Group Policy Object (GPO) that is linked to the domain object in Active Directory and applies to all users and computers in the domain by default. The settings configured in the Default Domain Policy affect the security and behavior of the domain, including password policies, account lockout policies, and other security-related settings. These settings can be modified to meet the specific needs of an organization, but should be done carefully to ensure that the security and stability of the domain are not compromised.
To know more about Default Domain Policy visit:
https://brainly.com/question/27960381
#SPJ11
structured application development usually involves a(n) , which proceeds from a general design to a detailed structure. group of answer choices
Structured application development typically involves a top-down approach, which proceeds from a general design to a detailed structure.
In this methodology, the overall system is initially defined, and then it is broken down into smaller, more manageable components or modules. Each module is then further refined and developed, gradually becoming more detailed and specific.
The top-down approach promotes clarity and organization by allowing developers to focus on high-level concepts before diving into the minutiae. It helps in understanding the overall system architecture and the relationships between components. Additionally, it encourages effective communication among team members, as everyone works from a shared, big-picture perspective.
During the process, tools such as flowcharts, data flow diagrams, and pseudocode may be used to represent the system's structure and functionality. These visual aids help developers identify any issues or potential bottlenecks in the design early on, making it easier to address them before moving further into development.
Structured application development also emphasizes the use of modular programming, wherein each module has a specific function and can be tested independently. This modularity not only makes the code easier to understand, maintain, and troubleshoot, but also promotes reusability, as modules can be shared across different applications.
In summary, structured application development's top-down approach fosters organization, efficiency, and communication, resulting in more robust and maintainable software systems.
Learn more about top-down approach here: https://brainly.com/question/18996262
#SPJ11
write a query which displays subject id and the average of construct 1 and construct 2 from the surveys which were answered within the first 15 days of january or february. the construct average will be calculated using the available surveys per subject.sample of expected output:
SELECT subject_id, AVG((construct1 + construct2) / 2) as average_construct
FROM surveys
WHERE (EXTRACT(MONTH FROM answered_date) = 1 AND EXTRACT(DAY FROM answered_date) <= 15)
OR (EXTRACT(MONTH FROM answered_date) = 2 AND EXTRACT(DAY FROM answered_date) <= 15)
GROUP BY subject_id;
To write a query that displays the subject id and the average of construct 1 and construct 2 from the surveys answered within the first 15 days of January or February, follow these steps:
1. Begin with the SELECT statement to choose the desired columns (subject_id, and the average of construct 1 and construct 2).
2. Use the FROM statement to specify the table (surveys).
3. Apply the WHERE statement to filter the surveys based on the date criteria (within the first 15 days of January or February).
4. Utilize the GROUP BY statement to group the results by subject_id.
5. Finally, use the AVG() function to calculate the average of construct 1 and construct 2.
Here's the SQL query:
```sql
SELECT subject_id, AVG((construct1 + construct2) / 2) as average_construct
FROM surveys
WHERE (EXTRACT(MONTH FROM answered_date) = 1 AND EXTRACT(DAY FROM answered_date) <= 15)
OR (EXTRACT(MONTH FROM answered_date) = 2 AND EXTRACT(DAY FROM answered_date) <= 15)
GROUP BY subject_id;
```
This query will display the subject id and the average of Construct 1 and Construct 2 from the surveys answered within the first 15 days of January or February. The construct average is calculated using the available surveys per subject.
Learn more about average function in SQL:https://brainly.com/question/30333197
#SPJ11
suppose riley trained two neural networks n1 and n2 on the same training data. to decide which network to use at test time, riley proposes to pick the network with the smallest training loss. amari argues that this is a bad idea. who is right? explain briefly.
It is important to Evaluate a model's performance on a separate validation or test set to determine its ability to generalize.
Riley's approach of choosing the neural network with the smallest training loss is not necessarily the best criterion for selecting the best model at test time.
This is because the training loss is not always a reliable indicator of a model's performance on unseen data.
The training loss is calculated by measuring the difference between the predicted outputs and the true outputs for the training data.
It is optimized during training to minimize this difference. However, this doesn't necessarily mean that the model will generalize well to new, unseen data.
A model with low training loss can still overfit to the training data, meaning that it may perform poorly on new data. On the other hand, a model with higher training loss may still be able to generalize well and perform better on unseen data.
Therefore, it is important to evaluate a model's performance on a separate validation or test set to determine its ability to generalize. Amari's argument that selecting a model based on training loss alone is a bad idea is valid, and it is generally recommended to use more comprehensive evaluation metrics such as accuracy, precision, recall, and F1-score to compare models' performance.
To Learn More About Evaluate
https://brainly.com/question/13160822
#SPJ11
ou want to make sure that a set of servers will only accept traffic for specific network services. you have verified that the servers are only running the necessary services, but you also want to make sure that the servers will not accept packets sent to those services. which tool should you use? answer port scanner system logs ids ips packet sniffer
To ensure that a set of servers will only accept traffic for specific network services, you should use an IDS (Intrusion Detection System) or IPS (Intrusion Prevention System) tool.
What is the explanation for the above response?An IDS or IPS tool is designed to monitor network traffic and detect any unauthorized access attempts or malicious activities. It can identify and block packets that are sent to specific network services, based on predefined rules or policies. This helps to prevent potential attacks or exploits on those services and protect the servers from unauthorized access.
While a port scanner can help you identify open ports on a server, it does not provide the ability to block or prevent traffic to specific services. System logs and packet sniffers can provide valuable information about network activity, but they do not have the capability to actively block or prevent network traffic.
Learn more about servers at:
https://brainly.com/question/7007432
#SPJ1
question 4 an unhappy systems administrator installed malware that attacked after a timed event, rather than when it was installed. what type of malware does this describe
The Malware described in your question is a logic bomb, installed by a disgruntled systems administrator, and activated based on a timed event rather than immediately upon installation.
It sounds like you're describing a type of malware called a logic bomb. A logic bomb is a type of malicious software that activates when specific conditions or a timed event occurs, rather than being triggered by the installation process itself. In this scenario, the unhappy systems administrator installed the logic bomb on the targeted system, and it remained dormant until the specified event or time took place.
When the set conditions were met, the logic bomb activated and caused harm to the system or data. Logic bombs can be used to delete or corrupt files, disrupt system operations, or even grant unauthorized access to the system for further attacks. These malicious programs can be difficult to detect and prevent since they lay dormant until activated by their triggering event.
To summarize, the malware described in your question is a logic bomb, installed by a disgruntled systems administrator, and activated based on a timed event rather than immediately upon installation. This type of malware can cause significant damage to the targeted system and is challenging to detect before it is triggered.
To Learn More About Malware
https://brainly.com/question/399317
#SPJ11
what user authentication technology uses a supplicant, an authenticator, and an authentication server?
Hi! The user authentication technology that uses a supplicant, an authenticator, and an authentication server is called IEEE 802.1X.
In this technology:
1. Supplicant: This is the user device (e.g., laptop, smartphone) that requests access to the network resources.
2. Authenticator: This is a network device (e.g., switch, access point) that acts as a gatekeeper, controlling access to the network based on the supplicant's authentication status.
3. Authentication Server: This is a separate server (e.g., RADIUS server) that verifies the credentials of the supplicant and informs the authenticator whether to grant or deny access to the network.
In summary, IEEE 802.1X is the user authentication technology that uses a supplicant, an authenticator, and an authentication server to provide secure network access.
You can learn more about authentication technology at: brainly.com/question/29977346
#SPJ11
____ is an abstract class for reading character streams.
a. System.out
b. Reader
c. System.err
d. OutStream
b. Reader is an abstract class for reading character streams.
An abstract class is a template definition of methods and variables in a specific class, or category of objects. In programming, objects are units of code, and each object is made into a generic class. Abstract classes are classes that contain one or more abstracted behaviors or methods.An abstract class is a template definition of methods and variables in a specific class, or category of objects. In programming, objects are units of code, and each object is made into a generic class.
Abstract classes are classes that contain one or more abstracted behaviors or methods. Objects or classes can be abstracted, which means that they're summarized into characteristics relevant to the current program's operation. Abstract classes are used in all object-oriented (OOP) languages, including Java, C++, C# and VB.NET.
learn more about abstract class here:
https://brainly.com/question/13072603
#SPJ11
Reader is an abstract class in Java that serves as the superclass for all classes that read characters from a stream.
In Java, Reader is an abstract class for reading character streams, which provides a framework for reading characters from various sources such as files, network connections, or other input streams.
The Reader class is an abstract class, which means that it cannot be instantiated directly but must be subclassed to be used. Subclasses of Reader include FileReader, which is used to read characters from a file, and InputStreamReader, which is used to read characters from an input stream.
System.out and System.err are not related to reading character streams but are used for writing output and error messages to the console, respectively.
OutStream is not a valid class in Java, so the correct answer is (b) Reader.
Learn more about java here:
https://brainly.com/question/30354647
#SPJ11
which of the following has an impact on packet jitter?group of answer choicesencoding delaydecoding delaythe type of multimedia applicationnetwork conditions such as buffer sizes, queueing delays, network congestion levels
Packet jitter, also known as delay variation, is impacted by several factors including encoding delay, decoding delay.
The type of multimedia application, and network conditions such as buffer sizes, queueing delays, and network congestion levels.
1. Encoding delay: The time it takes to convert raw data into a digital format that can be transmitted over a network. Different encoding methods may require varying amounts of time, affecting packet jitter.
2. Decoding delay: The time it takes to convert the received digital data back into its original format at the receiving end. This process can introduce variations in delay, contributing to packet jitter.
3. Type of multimedia application: Different applications have distinct requirements for data transmission rates and timing. For example, real-time applications like video conferencing need low jitter, while non-real-time applications like file transfers can tolerate higher jitter levels.
4. Network conditions: Factors such as buffer sizes, queueing delays, and network congestion levels can impact packet jitter. Large buffer sizes may increase delay, while network congestion can cause packets to experience varying queueing delays. In turn, these variations can result in packet jitter.
To Learn More About Packet jitter
https://brainly.com/question/30074103
#SPJ11
How large is an impact crater compared to the size of the impactor?
A) 100 times larger
B) 1,000 times larger
C) 10 times larger
D) 10-20 percent larger
E) the same size
The answer is A) 100 times larger. An impact crater is typically about 100 times larger than the size of the impactor that created it.The size of an impact crater is typically much larger than the size of the impactor that created it. The exact ratio depends on a number of factors, such as the velocity, angle of impact, and composition of both the impactor and the target material.
However, in general, the size of an impact crater can be thousands or even millions of times larger than the size of the impactor.This is because when an impactor collides with a planetary surface, it releases a tremendous amount of energy that causes the target material to be ejected and displaced. This creates a shockwave that radiates outward from the impact site, causing the surface material to melt, vaporize, and/or fracture. The resulting crater is a bowl-shaped depression that is much larger than the original impactor. The size of the impact crater also depends on the gravity of the target planet or moon. On a planet with stronger gravity, the shockwave generated by an impact will be more concentrated, resulting in a smaller crater for a given impactor sizeIn summary, the size of an impact crater is typically much larger than the size of the impactor that created it, with the exact ratio depending on a number of factors. The size of the impact crater is determined by the amount of energy released during the impact, which causes the target material to be ejected and displaced, resulting in a bowl-shaped depression.
To learn more about composition click on the link below:
brainly.com/question/13808296
#SPJ11
An impact crater is typically about 10 times larger than the size of the impactor that created it. Therefore, the answer is:
C) 10 times larger
An impact crater is typically about 10 times larger than the size of the impactor that created it. This is due to the energy released during the impact, which causes the material at the site of the collision to be displaced and form the crater. This is known as the "10 times rule", which is a rough estimate based on observations of a wide range of impact events. However, the actual size ratio can vary depending on factors such as the angle and velocity of impact, the composition and density of the target material, and the size and shape of the impactor. Thus, we can say that the correct option is :
C) 10 times larger
To learn more about impact crater visit : https://brainly.com/question/30150720
#SPJ11
the characteristic rapid edits, creative camera angles, compressed narratives, and staged performances of what television channel heavily influenced the advertising industry in the mid-1980s?
The characteristic rapid edits, creative camera angles, compressed narratives, and staged performances that heavily influenced the advertising industry in the mid-1980s can be attributed to the MTV channel.
MTV revolutionized the way commercials were produced, with its music videos showcasing quick cuts, stylized visuals, and imaginative concepts that translated into advertising. The channel's impact was profound and lasting, ushering in a new era of slick, eye-catching ads that were more akin to mini-music videos than traditional commercials.
MTV is an acronym for Music Television. MTV is a cable television network that started out as a 24-hour music video platform.
The 1989 release of Madonna's "Like a Prayer" video is only one prominent instance of how MTV established a reputation for challenging cultural norms and taste. The MTV Music Video Awards were introduced by the channel in 1984, and the MTV Movie Awards followed in 1992.
To know more about MTV channel, click here:
https://brainly.com/question/30790188
#SPJ11
question 1 how can you recover from an unexpected data loss event? select all that apply. 1 point write a post-mortem report design a disaster recovery plan restore data from backups recover data from damaged devices
Recovering from an unexpected data loss event requires a combination of methods such as writing a post-mortem report, designing a disaster Recovery plan, restoring data from backups, and recovering data from damaged devices.
There are several ways to recover from an unexpected data loss event. The following methods are some of the ways that can be used:
1. Write a post-mortem report: A post-mortem report is a document that outlines the cause of the data loss event, the impact of the event, and the steps taken to recover from it. This report can help prevent future data loss events.
2. Design a disaster recovery plan: A disaster recovery plan is a plan that outlines the steps to take in the event of a data loss event. This plan should include steps to take to recover data from backups, recover data from damaged devices, and any other necessary steps.
3. Restore data from backups: Backups are copies of data that can be used to restore lost data. It is important to regularly backup data to ensure that data can be restored in the event of a data loss event.
4. Recover data from damaged devices: Data can sometimes be recovered from damaged devices using specialized software. However, it is important to note that not all data can be recovered from damaged devices.
In summary, recovering from an unexpected data loss event requires a combination of methods such as writing a post-mortem report, designing a disaster recovery plan, restoring data from backups, and recovering data from damaged devices. It is important to have a plan in place to ensure that data can be recovered in the event of a data loss event.
To Learn More About Recovery
https://brainly.com/question/30752642
#SPJ11
looking at the ascii contents of file1.nc, can you tell that the rijndael-256 algorithm was used to encrypt the file
Looking at the ASCII contents of file1.nc alone would not provide any information about the encryption algorithm used to encrypt the file.
The ASCII contents of a file refer to the characters and symbols present in the file, but they do not reveal anything about the encryption process or algorithm used to protect the file's contents. To determine the encryption algorithm used, one would need access to the encryption key, knowledge of the encryption process, or other relevant information that is not present in the ASCII contents of the file.For such more questions on ASCII
https://brainly.com/question/20361136
#SPJ11
during the process of forwarding traffic, what will the router do immediately after matching the destination ip address to a network on a directly connected routing table entry?
After the router matches the destination IP address to a Network on a directly connected routing table entry during the process of forwarding traffic.
it will perform the following steps:
1. Determine the exit interface: The router identifies the appropriate interface to use for forwarding the traffic to the destination network. This is based on the routing table entry that matches the destination IP address.
2. Update the data link header: The router modifies the data link header of the packet by updating the source and destination MAC addresses. The source MAC address is replaced with the MAC address of the router's exit interface, while the destination MAC address is replaced with the MAC address of the next hop device (if known) or the destination device.
3. Update the Time-to-Live (TTL) field: The router decrements the TTL field in the IP header by one. This prevents packets from looping infinitely in the network.
4. Verify the checksum: The router recalculates the checksum for the IP header to ensure it is correct. If the checksum is invalid, the packet is dropped.
5. Forward the packet: Finally, the router forwards the packet through the exit interface towards the destination network. If the destination MAC address is unknown, the router may perform Address Resolution Protocol (ARP) to obtain the appropriate MAC address before forwarding the packet.
By following these steps, the router ensures that traffic is accurately and efficiently forwarded towards its destination.
To Learn More About Network
https://brainly.com/question/28342757
#SPJ11
what happens if an assembly instruction starts from the first column? additionally, is it possible to write two assembly instructions on one line?
If an assembly instruction starts from the first column, it indicates that it is the beginning of a new instruction. The first column is usually reserved for labels, which are used to identify a location in the program code. However, if an instruction is placed in the first column, it means that it is not associated with any label and is therefore considered to be a standalone instruction.
As for whether it is possible to write two assembly instructions on one line, it depends on the assembler being used. In some assemblers, it is possible to write multiple instructions on the same line by separating them with a semicolon or a colon. However, this practice is generally discouraged as it can make the code harder to read and maintain. It is recommended to write one instruction per line, starting from the second column after any label.
Hi! An assembly instruction that starts from the first column is interpreted as a regular instruction by the assembler. It is executed accordingly based on the given operation and operands.
As for writing two assembly instructions on one line, it is generally not possible, as assembly language follows a one-instruction-per-line format. Each instruction should be written on a separate line for the assembler to interpret and process them correctly.
If an assembly instruction starts from the first column, it will be interpreted as the beginning of the instruction, and the assembler will attempt to execute it accordingly.
In assembly language, an instruction that starts from the first column is usually considered a label, which is a symbolic name that refers to a memory address in the program code. A label is used to mark a specific location in the code, which can then be referred to by other parts of the code using the label name.
As for writing two assembly instructions on one line, it is generally not possible in most assembly languages. Assembly instructions should be written on separate lines to ensure proper execution and maintain readability. Each line usually represents a single instruction or directive for the assembler to process.
To learn more about assembly language visit : https://brainly.com/question/30299633
#SPJ11
given an er diagram with 10 entities, each with 5 attributes, and 5 relationships, each with 2 attributes, how many tables would the corresponding relational scheme have?
The corresponding relational Scheme would have 15 tables.
Given an ER diagram with 10 entities, each with 5 attributes, and 5 relationships, each with 2 attributes, the corresponding relational scheme would have a certain number of tables.
Step 1: Determine the number of tables for entities.
Since there are 10 entities, each with its own set of attributes, you would need one table for each entity. This results in 10 tables.
Step 2: Determine the number of tables for relationships.
In a relational scheme, each relationship usually requires an additional table, especially if the relationship has attributes of its own. Since there are 5 relationships, each with 2 attributes, you would need 5 additional tables to represent these relationships.
Step 3: Calculate the total number of tables.
Combine the tables from entities and relationships. In this case, you have 10 tables for entities and 5 tables for relationships.
Total tables = 10 (from entities) + 5 (from relationships)
Total tables = 15
Therefore, the corresponding relational scheme would have 15 tables.
To Learn More About Relational
https://brainly.com/question/13262352
#SPJ11
My password is a number between 10,000,000 and 11,000,000. I know, I know, that's weak" you say. At least its 8 characters? Can you guess it?
PLSSSSSSS HELP
a(n) _______ is a container that helps to organize the contents of your computer.
Answer:
folder
Explanation:
what inbound firewall rules must be enabled on the domain profile for remote group policy update to be successful?
To allow remote Group Policy updates to be successful, you need to enable the following inbound firewall rules on the domain profile:
1. Remote Scheduled Tasks Management (RPC)
2. Remote Service Management (RPC)
3. Remote Event Log Management (RPC)
4. Windows Management Instrumentation (WMI-In)
5. File and Printer Sharing (SMB-In)
Enabling these rules will allow the necessary communication between the client and the domain controller to update Group Policy remotely.
Inbound firewall rules for the "Remote Administration" group must be enabled on the domain profile for remote group policy update to be successful.
Group Policy updates rely on remote procedure calls (RPC) and remote administration traffic. By default, Windows Firewall blocks inbound RPC traffic, which is required for remote group policy update to be successful.
herefore, to allow remote group policy update, inbound firewall rules for the "Remote Administration" group must be enabled on the domain profile. These rules can be configured using the Group Policy Management Console.
Specifically, the "Windows Firewall: Allow inbound remote administration exception" policy should be enabled and configured with the appropriate settings to allow inbound RPC traffic from trusted sources, such as domain controllers and other management workstations.
Once these firewall rules are enabled, remote group policy update should be successful.
For more questions like Windows click the link below:
https://brainly.com/question/31252564
#SPJ11
at 1200 baud, how long (in mill-seconds) does it take to send one byte, including the 2 framing bits (start, stop bit) for each byte ?
At a 1200 baud rate, it takes approximately 8.33 Milliseconds to send one byte, including the 2 framing bits (start and stop bits) for each byte.
Given a baud rate of 1200 and the need to send one byte with 2 additional framing bits (start and stop bits), we can calculate the time it takes to send this data in milliseconds.
1. First, understand that "baud" refers to the number of signal changes per second. In this case, it's 1200 baud.
2. Determine the number of bits to be transmitted. A byte consists of 8 bits, and you need to include 2 additional framing bits. So, you'll be transmitting 10 bits in total (8 bits for the byte + 2 framing bits).
3. Calculate the time it takes to transmit one bit. Since there are 1200 signal changes per second, you have:
1 second / 1200 baud = 1/1200 seconds per bit
4. Convert the time per bit to milliseconds:
(1/1200 seconds) * 1000 milliseconds/second = 1000/1200 milliseconds per bit ≈ 0.833 milliseconds per bit
5. Determine the time to send 10 bits:
10 bits * 0.833 milliseconds per bit ≈ 8.33 milliseconds
So, at a 1200 baud rate, it takes approximately 8.33 milliseconds to send one byte, including the 2 framing bits (start and stop bits) for each byte.
To Learn More About Milliseconds
https://brainly.com/question/24180453
#SPJ11
per data protection and privacy law, the cloud service provider is responsible for safeguard data. true false
The given statement "Per data protection and privacy law, the cloud service provider is responsible for safeguarding data" is true because this includes implementing appropriate security measures and ensuring compliance with applicable regulations.
Customers also have a responsibility to ensure they are properly securing their own data and following best practices for data protection. According to data protection and privacy laws, such as GDPR and CCPA, cloud service providers must implement appropriate security measures to protect the data they process and store on behalf of their clients.
This includes employing various security protocols and adhering to best practices to maintain the confidentiality, integrity, and availability of the data.
You can learn more about cloud service at: brainly.com/question/29531817
#SPJ11
the software engineering institute (sei) established a new model, called , which incorporates software and systems development into a much larger framework.
The software engineering institute (SEI) established a new model called the Capability Maturity Model Integration (CMMI).
This model incorporates software and systems development into a much larger framework that encompasses the entire organization's processes and practices. The CMMI model provides a set of best practices that can be applied across an organization to improve processes and achieve higher levels of maturity. The model consists of five maturity levels, with each level building on the previous one to provide a roadmap for continuous process improvement. The CMMI model provides a common language for organizations to communicate their process improvement goals and to benchmark their progress against industry standards.
By incorporating software and systems development into a larger framework, the CMMI model enables organizations to achieve greater efficiencies, reduce costs, and deliver high-quality products and services to their customers. The CMMI model has become a widely recognized and respected standard for process improvement in many industries, including aerospace, defense, healthcare, and information technology.
Learn more about Capability Maturity Model Integration here: https://brainly.com/question/28999598
#SPJ11
define cybersquatting. how is it different from cyberpiracy? what type of intellectual property violation does cybersquatting entail?
Cybersquatting refers to the act of registering, using, or selling a domain name that is similar or identical to a trademark or a well-known brand with the intent of profiting from the confusion or traffic generated by the brand. Cybersquatting is different from cyberpiracy in that the latter refers to the act of hacking or hijacking a domain name or website belonging to someone else.
Cybersquatting is considered an intellectual property violation because it involves the unauthorized use of someone else's trademark or brand name. It can result in lost revenue, damage to reputation, and confusion among customers. Many countries have laws in place to prevent cybersquatting and to provide remedies for victims of this practice.
Hi! Cybersquatting is the act of registering, using, or selling a domain name with the intent to profit from the goodwill of someone else's trademark. It is different from cyberpiracy, which involves unauthorized use, reproduction, or distribution of copyrighted material, such as software, music, or movies.
Cybersquatting is a type of intellectual property violation that specifically targets trademarks, as it exploits the similarity between the domain name and a recognized brand or trademark, potentially causing confusion or damage to the brand owner's reputation.
To learn more about Cybersquatting r click on the link below:
brainly.com/question/14388908
#SPJ11
a products table and an orders table have several linked records that are joined by a cross-referencing table named productsorders. what kind of table relationship do these tables demonstrate?
The tables demonstrate a many-to-many relationship, where a product can be associated with multiple orders and an order can contain multiple products.
The cross-referencing table named productsorders is used to connect the two tables and hold the foreign keys from both tables to establish the relationship. In a many-to-many relationship, each record in one table can be associated with multiple records in another table, and vice versa. This type of relationship requires a cross-referencing table to link the two tables together.
For example, in this scenario, a single order may contain multiple products, and a single product may be included in multiple orders. The "productsorders" table would contain records that link each product to the order(s) in which it was included.
Learn more about many-to-many relationship: https://brainly.com/question/13437434
#SPJ11
to keep attackers from knowing the directory structure you create on an iis web server, an individual should create what?
To keep attackers from knowing the directory structure on an IIS web server, an individual should create a custom error page and disable directory browsing. This helps prevent unauthorized access and maintains security.
To keep attackers from knowing the directory structure you create on an IIS web server, an individual should create a custom error page that does not reveal any specific details about the directory structure. This can be done by configuring the web server to display a generic error message instead of a detailed error message that might reveal sensitive information about the server's directory structure. Additionally, access controls and permissions should be set up properly to limit the access of attackers to sensitive directories and files. Regular updates and patches should also be applied to the web server software to prevent known vulnerabilities that attackers might exploit.
Learn more about attackers here
https://brainly.com/question/28232298
#SPJ11
To keep attackers from knowing the directory structure you create on an IIS web server, an individual should create a custom error page.
Here are the steps to do so:
1. Open Internet Information Services (IIS) Manager.
2. Navigate to the website or application for which you want to create the custom error page.
3. In the "Features View" pane, double-click "Error Pages."
4. In the "Actions" pane, click "Add" to create a new error page.
5. In the "Add Custom Error Page" dialog box, enter the HTTP status code (e.g., 404 for "Not Found") and the path to your custom error page.
6. Choose the desired response mode: "Execute URL" or "File."
7. Click "OK" to save your settings.
By creating a custom error page, you can prevent attackers from gaining information about your web server's directory structure, thus increasing security.
Learn more about Internet Information Services (IIS): https://brainly.com/question/30784617
#SPJ11
g which of the following are best practices of access control? (select two) group of answer choices implement dynamic provisioning of access control capabilities for different subjects make sure there is only one execution path leading to the access of the object and put an access control check anywhere on that path provisioning based on individuals gives the best flexibility to manage access control access control checks should be performed as many times as necessary without over concerns for redundancy
The two best practices of access control are A) implementing dynamic provisioning of access control capabilities for different subjects and B) ensuring there is only one execution path leading to the access of the object and putting an access control check anywhere on that path.
Dynamic provisioning of access control capabilities allows for efficient management of access control by granting or revoking permissions based on changing circumstances or requirements. This is especially important in large organizations with complex access control requirements.
Ensuring there is only one execution path leading to the access of an object and putting an access control check anywhere on that path helps to prevent unauthorized access by ensuring that every access attempt is checked against the access control policy. This can be achieved through the use of mandatory access control or role-based access control.
Provisioning based on individuals may not always provide the best flexibility to manage access control, as it can become cumbersome to manage a large number of individual permissions.
Access control checks should be performed only as necessary to reduce redundancy and improve efficiency, while still ensuring that access control policies are being enforced. So A and B are correct options.
For more questions like Control click the link below:
https://brainly.com/question/13215530
#SPJ11
a person, place, object, event, or concept in the user environment about which the organization wishes to maintain data refers to a(n): group of answer choices
Answer:
ENTITY: A person, place, object, event, or concept about which the organization wishes to maintain data.
Explanation:
you have a network with two routers as shown. router a currently has a single static route to network 10.0.155.80/28. you need to add another subnet to router b. this subnet should also use a 28-bit mask. you would like to replace the existing static route to network 10.0.155.80/28 with a single summarized static route that includes the old network and the new network. you want to minimize wasted addresses. what should you do? (select two.)
To add another subnet to Router B and summarize the static route, you should:
1. Add the new subnet to Router B and configure a static route to that subnet using a 28-bit mask.
2. On Router A, replace the existing static route to network 10.0.155.80/28 with a summarized static route that includes the old network and the new network using a 26-bit mask.
This will allow both subnets to use the same summarized static route while minimizing wasted addresses. Adding a new subnet to Router B involves creating a new network address and configuring the necessary settings on the router to enable communication with devices on that subnet.
This involves adding a static route to the routing table of Router B that specifies the new subnet's network address and mask, as well as the next hop address of Router A's interface that is connected to the new subnet.
This is for answering the question "you would like to replace the existing static route to network 10.0.155.80/28 with a single summarized static route that includes the old network and the new network. you want to minimize wasted addresses. what should you do?"
Learn more about static route: https://brainly.com/question/6783973
#SPJ11