The person who threw the punch remains stationary, and their hand undamaged because the impulse received by the opponent is greater than the reaction force experienced by the person who threw the punch.
What is Newton's third law of motion?Newton's third law of motion states that for every action, there is an equal and opposite reaction. That is, action force and reaction force are equal and opposite.
Mathematically, the Newton's third law of motion can be stated as follows;
Fa = Fb
where;
Fa is the action force applied Fb is the reaction force received due to the applied forceIn a barfight, when one person swings a punch with their bare hand and knocks another person over a table in spectacular fashion. The person who threw the punch remains stationary, their hand undamaged because the impulse received by the opponent is greater than the reaction force experienced by the person who threw the punch.
The force applied by the person who threw the punch maybe equal and opposite to reaction he received but the impulse experienced by the opponent is greater.
Learn more about Newton's third law of motion here: https://brainly.com/question/25998091
#SPJ1
Suppose a woman wearing high-heeled shoes has a mass of 20 kg the area of each shoe is 10 cm2. How much pressure does she exert on the ground with both feet or with one foot? Explain your reasoning
She will exert a pressure of 20N/m² for one foot. For both feet 40N/m². The reason is that pressure increases with an increase in force. pressure and decreases within the area.
What is Pressure?
This is the force acting per unit area. It can be calculated using the formula
P=F/A or P= mg/A
Where m = mass of the object
g = acceleration due to gravity
A = area.
From the question given:
m =20kg
A =10cm²
Applying the above formula,
P= (20*10)/10
P=20N/m²
Hence, the pressure exerted by the two feet will be 20+20= 40N/m²
Learn more about pressure on
https://brainly.com/question/12414404
#SPJ1
what objects have no energy
Answer:
If a particle has no mass (m = 0) and is at rest (p = 0) it has no energy
Motion is a change in ____. Question 6 options: time speed velocity position
Answer:
Motion is a change in Position.
Explanation
1. Change in time cannot be a motion, because time can change without any movement of an object.
2. speed and velocity are parts of motion but change in speed and motion is an acceleration (refer from acceleration formula), which means motion is not only change in speed or velocity but it is change in position.
Because change in position can be referred as speed and accerelation
When u combine two or more atoms of different elements, u make an_
Answer: *a molecule.
Explanation: A molecule is the combination of two or more atoms
If is the angle between and the perpendicular is 90 then the lines of forces are O a. Not sure O b. Zero O C. Maximum O d. None of the above.
If the angle between displacement and force is 90° then the lines of force are zero. The correct option to this question is B.
The work completed is zero if there is a 90 degree angle between the force and the displacement.A scalar quantity, such as work, has simply magnitude and no direction.W= F×s or W= F×scosФ, which stands for "done," is the scalar product of force and displacement.Since cos90° has a value of 0, everything multiplied by 0 also has a value of 0.Because of this, when the angle between the force and the displacement is 90, we say that work is complete. For more information on scalar quantity kindly visit to
https://brainly.com/question/26099846
#SPJ9
Three masses are connected as shown on a smooth horizontal surface.
(Take acceleration due to gravity as 9.8ms^-2)
a)Calculate the acceleration of the mass M3.
b)Calculate the tension in each string.
c)If the surface was not smooth describe how:
1.the acceleration of the system would be affected.
2.the tension in each string would be affected.
a) The acceleration of the mass M3 is 14.42 m/s².
b) The tension in each string. is : T₁ = 5119 N.
T₂= 7714 N.
And T₃ . = 12833 N.
c) If the surface was not smooth, there will be a frictional force which lessen both tension and acceleration of the system.
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Let the acceleration of the system = a.
And the tension in each string is T₁ , T₂ and T₃ respectively.
Then for M₁ mass;
tension in string T₁ = M₁a
For M₂ mass:
tension in string T₂ = M₂ a
For M₃ mass:
tension in string T₃ - M₃g = M₃ a.
⇒T₃ = M₃g + M₃ a.
And T₃ = T₁ + T₂.
⇒M₃g + M₃ a. = M₂ a + M₁a
⇒ a = M₃g/( M₁ +M₂ -M₃)
= 530× 9.8/ (355+535-530)
= 14.42 m/s².
Then, the tension in each string is T₁ = 355 * 14.42 N = 5119 N.
T₂ = 535×9.8 N = 7714 N.
And T₃ = T₁ + T₂ = 5119 N +7714 N. = 12833 N.
If the surface was not smooth, there will be a frictional force which lessen both tension and acceleration of the system.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ1
Does Monera move?
20 points
Answer:
Prokaryotic Bacteria
Explanation:
A television uses a current of 1.5A at 120V. The television is used for 2 hours. Calculate
the power used in kW and the energy used in kWh.
Answer:
the power used is 0.18kW and the energy used is 0.36kWh
Explanation:
from power= current × voltage
power= 1.5A × 120V
power= 180W or 0.18kW
energy used = power × time
= 0.18kW ×2h
energy used = 0.36kWh
Q)What is the force between two small charged spheres having charges of 2 × 10^–7C and 3 × 10^–7 C placed 30 cm apart in the air?
The electrostatic force between the two charged spheres is determined as 6 x 10⁻³ N.
What is the electrostatic force between two charged objects?
The electrostatic force between two charged objects, according to Coulomb's law, is directly proportional to the product of the charges and inversely proportional to the square of the distance between the charges.
F = kq₁q₂/r²
where;
K is Coulomb's constantq₁ is the first chargeq₂ is the second charger is the distance between the chargesF = (9 x 10⁹ x 2 x 10⁻⁷ x 3 x 10⁻⁷) / (0.3²)
F = 6 x 10⁻³ N
Learn more about electrostatic force here: https://brainly.com/question/17692887
#SPJ1
According to the law of universal gravitation, all objects exert gravitational forces on each other. Which statement best describes the information you need to calculate the gravitational force?
The mass of each object and the distance between the two objects
The mass of the larger object and the distance between the two objects
The distance between the objects and the electrical charge of each object
The weight of the objects and the distance between the two objects
Option -a is correct. The two objects' respective masses and distances from one another.
Which of the following statements about objects in gravitational pull on one another is always true?In other words, a line connecting the two masses is where the force vectors we could depict on each mass lie. When two objects pull on one another due to gravity, this is always true. The lines of those attractional forces run between the centers of mass of the two objects.
Any particle of matter in the universe will gravitate toward any other with a force that varies directly as the product of the masses and inversely as the square of the distance between them, according to Newton's law of gravitation.
To know more about gravitational force visit:
https://brainly.com/question/12528243
#SPJ1
Can someone please explain how to do this?
A babysitter pushing a stroller starts from rest and accelerates uniformly at a rate of 0.778 m/s^2. What is the velocity of the stroller after it has traveled 5.54 m?
A falling object with a mass of 2.55 kg encounters 4.0 N of air resistance. What is the acceleration of the object? (Choose up to be the positive direction, and remember the definition of weight).
The acceleration of the falling object with a mass of 2.55 kg that encounters 4.0 N of air resistance is 1.57m/s².
How to calculate acceleration?Acceleration is change of velocity with respect to time (can include deceleration or changing direction).
The acceleration of a body can be calculated by using the following expression;
a = F/m
Where;
a = acceleration (m/s²)F = force (N)m = mass (kg)According to this question, a mass of 2.55 kg encounters 4.0 N of air resistance. The acceleration of the object can be calculated as follows:
a = 4N ÷ 2.55kg
a = 1.57m/s²
Therefore, 1.57m/s² is the acceleration of the object.
Learn more about acceleration at: https://brainly.com/question/28767690
#SPJ1
A box is dropped out of a moving airplane. The airplane is traveling at 50 m/s
East. The box is dropped from rest with respect to the airplane. The box travels a
vertical distance of 40 m before landing on a trampoline. The airplane continues
traveling at a constant speed after the box is dropped and the wind resistance on
the falling box is negligible.
Choose the option that correctly identifies the missing terms, in order of their
appearance in the sentences.
The box has an initial horizontal velocity of
of
m/s. The box takes
seconds to reach the ground. The box experiences an acceleration
m/s2. The box will land directly
the airplane.
The options that correctly identifies the missing terms, in order of their
appearance in the sentences are as follows:
The box has an initial horizontal velocity of 50m/s.The box takes 2.86 seconds to reach the ground.The box experiences an acceleration of 9.8 m/s².The box will land directly 143 m from the airplane.What is the initial horizontal velocity of the box dropped from the airplane?The initial horizontal velocity of the box dropped from the airplane is equal to the horizontal velocity of the airplane.
The velocity of the airplane is 50 m/s
Hence, the horizontal velocity of the box is also 50m/s.
The box falls freely under the effect of gravity. Hence, the acceleration in the vertical direction will be equal to the acceleration due to gravity.
The time taken by the box to reach the ground is calculated from the formula below as follows:
t = √(2h/g)
where;
t is the time taken to reach the ground
h is the vertical height above the ground = 40 m
g is the acceleration due to gravity = 9.8 m/s²
t = √(2 * 40 / 9.8)
t = 2.86 seconds
The horizontal distance traveled by the box = 2.86 s * 50 m/s
The horizontal distance traveled by the box = 143 m
Learn more about free fall at: https://brainly.com/question/11257529
#SPJ1
An unknown radioactive element decays into non-radioactive substances. It's 520the radioactivity of a sample decreases by 60 percent.
a) What is the half-life of the element?
b) How long will it take a 100 mg sample to break down to 92 mg?
The half life of the sample is 393.4 days while it would take 47.3 days for 100 mg sample to break down to 92 mg.
What is the half-life of the element?We know that the half life has to do with the time that it takes for only half of the number of the radioactive atoms in the sample to remain. We have in this case that;
N/No = (1/2)t/[tex]t_{\frac{1}{2} }[/tex]
No = Number of radioactive atoms originally present
N = Number of atoms at time t
t = time taken
[tex]t_{\frac{1}{2} }[/tex] = half life
Then we are told that the sample decreases by 60 percent thus 40 percent is left.
We have;
0.4No/No = (1/2)^520/[tex]t_{\frac{1}{2} }[/tex]
0.4 = (1/2)^520/[tex]t_{\frac{1}{2} }[/tex]
ln0.4 = 520/[tex]t_{\frac{1}{2} }[/tex] ln 0.5
520/[tex]t_{\frac{1}{2} }[/tex] = ln0.4 /ln 0.5
[tex]t_{\frac{1}{2} }[/tex] =520/ ln0.4 /ln 0.5
= 393.4 days
Then
Using;
92/100 = (1/2)^t/ 393.4
0.92 = (1/2)^t/ 393.4
ln 0.92 = t/ 393.4 ln 0.5
t = ln 0.92/ ln 0.5 * 393.4
t = 47 days
Learn more about half life:https://brainly.com/question/24710827
#SPJ1
If the friction force between layers in fluid is dependent on gradient of velocity, area of layer and viscosity coefficient of fluid by using the theory of the dimensions estimate the relation.
The characteristics of the surfaces in contact determine the coefficient of static frictional force. It doesn't depend on how big the surfaces are. Depending on the fluid gradient in velocity between fluid layers.
What viscosity means?It speaks of the friction force of a fluid in motion. A fluid with high viscosity resists motion due of high internal stress created by its molecular structure. In cold conditions, low-viscosity oils help the motor begin more quickly by reducing friction between engine components. Elevated oils, on the other hand, retain the strength and thickness of the film.
How come viscosity is measured?Measurements of viscosity are utilized in the grocery business to increase productivity and cost effectiveness. It has an effect on how quickly a substance moves through a pipe, what it takes to set or dry, and also how quickly the fluid is dispensed into packaging.
To know more about Viscosity visit:
https://brainly.com/question/2193315
#SPJ13
The light given off from a candle is which method of heat transfer?
A. Conduction
B. Convection
C. Radiation
As soon as a candle is lit, the air just above the flame begins to warm up. As a result, the air becomes hotter and rises. This is caused by the convectional process of heat transfer, and the hot air stream is referred to as a convection current.
The air is heated by the candle, and the heat rises to the hand. The hand eventually pulls away from the candle because it becomes too hot.The heated air that rises toward the ceiling in your home is an excellent illustration of a convection current. Convection currents are prevalent in the air. The process takes place because warmer air is thought to be less dense than colder air. Wind is another excellent illustration of convection circulation.When a candle burns, the oxygen in the air and the hydrogen and carbon from the wax mix to form carbon dioxide and water vapor. These two gases make up the majority of the material in the candle.To know more about convection
https://brainly.com/question/10219972
#SPJ1
I need this answer, urgently
What happens if an object displaces more water than it weighs?
(a) the object floats
(b) the object sinks
(c) the object floats, then sinks
(d) not enough information to tell
Answer:
if the object does not weighs it would stay on top of the surface of the water but if the object has weight it would sink
A student wants to investigate how the speed of a wave on a stretched string
depends on the tension in the string.
The student uses the apparatus in the figure above.
Describe a method the student could use for this investigation.
The wavelength will double but the speed won't change if the oscillator's period doubles and the oscillator's amplitude can quadruple while maintaining the same wave speed and wavelength based on changes in energy.
What is an oscillator?A mechanical or electronic device known as an oscillator operates on the oscillation principle, which describes a periodic fluctuation between two objects the wavelength will double but the speed won't change if the oscillator's period doubles.
The oscillator's amplitude can quadruple while maintaining the same wave speed and wavelength based on changes in energy. An operating frequency of an oscillator is typically determined by a quartz crystal. Such crystals vibrate when a direct current is supplied at a frequency that is determined by their thickness and how they were extracted from the original mineral rock. Some oscillators combine inductors, resistors, and/or capacitors to determine the frequency. However, oscillators that use quartz crystals produce the highest levels of stability (frequency consistency).
The clock, a particular oscillator found in computers, acts as the microprocessor's pacemaker. The clock frequency (or clock speed), which is typically expressed in megahertz (MHz), plays a significant role in determining how quickly a computer can execute change.
To know more about oscillators, visit:
https://brainly.com/question/29273618
#SPJ1
A detailed graph of angular velocity versus time is shown. What is the angular displacement, in radians, during the time interval from 0.75 s to 14.2 s?
0.116 rad/s is the angular speed in radians, during the time interval from 0.75 s to 14.2 s
ω=Δθ/Δt
Δθ= 90° = 1.571rad
Δt=13.45
ω=1.571/13.45
ω=0.116 rad/s
The rate of change of angular displacement, or the angle a body travels along a circular path, is the definition of angular speed. Calculating angular speed involves dividing the quantity of rotations or revolutions made by a body by the amount of time required. Omega is a Greek letter that represents angular speed. The SI's angular speed unit is rad/s.
As is well known, angular speed is determined by dividing the rate of displacement change by the time. As a result, the angular speed equation is = /t. Despite the procedure stated above, a different and more well-liked formula is used to determine angular speed in competitive testing. As ω = θ/t
To know more about angular speed visit : brainly.com/question/16407861
#SPJ9
In the lab downstairs physics majors use a rotating mirror to measure the speed of light within a few percent of the actual value they switch the mirror from rotating clockwise at 115 rad/s to counter clockwise at 115 rad/s over the course of 85 seconds. Assume constant angular acceleration.
QUESTION: how many revolutions does the rotating mirror go through when it gets to a 0 angular velocity along the way to new speed. SHOW WORKING OUT
The number of complete cycles the rotating mirror goes through before the angular velocity gets to zero is approximately 1166.8 revs
What is angular velocity?Angular velocity is the ratio of the angle turned to the time taken.
The kinematic equation for angular velocity are presented as follows;
ω = ω₀ + α·t
θ = θ₀ + ω₀·t + 0.5·α·t²
Where;
θ₀ = The initial angle turned = 0
ω₀ = The initial angular velocity of the mirrors = 115 rad/s clockwise
α = The angular acceleration = (115 - (-115))rad/s/(85 s) = -46/17 m/s²
t = The duration of the motion;
When the angular velocity, ω is zero, we get;
0 = 115 - 46/17·t
t = 85/2
Which indicates;
θ = 0 + 115× (85/2) + 0.5×(46/17) ×(85/2)² = 7331.25
θ = 7331.25 radians
θ = 7331.25/(2×π) ≈ 1166.8 rev
The mirrors would have turned through approximately 1166.8 revolutions when the angular gets to zero
Learn more about angular velocity and acceleration here:
https://brainly.com/question/13014974
#SPJ1
what sources of motion does a shake flashlight harness
Answer:
The power for the LED stems from the movement of a magnet through a coil of wire on a tube. Each time the magnet moves through the coil of wires, the magnet generates a pulse of electricity. This is what happens when you shake the flashlight. A capacitor allows you to use the flashlight without continuously shaking it.
Two 20 kg buckets of water are being lowered into a well. There is a rope attached to the top bucket and a rope attaching the two buckets. If the acceleration is 0.025 m/s squared downwards, what is the tension in each rope?
does the current stays the same throughout in a parallel circuit
Answer:
When the current splits, the current in each branch after the split adds up to the same as the current just before the split.
No, the current is not constant across the entire parallel circuit.
The circuit is known to be divided into branches by the parallel connection. Consequently, those branches are formed from the total current.
A parallel circuit may have one or more branches. The total current splits into its corresponding branches as soon as it enters one. Less current flows through the branches than across the entire system. The branch resistance affects the branch current values. In parallel circuits, the current is therefore different. All components in a parallel arrangement share the same voltage.
Click to learn more about parallel circuits
https://brainly.com/question/11409042
In class, one sophisticated and expensive demonstration the class would see is where I lifted one end of the table until my book started to slide, then kept the angle fixed. Suppose the coefficient of kinetic friction was μk = 0.490, and the 1.35 kg book started sliding from rest at an angle of 39.7o. What would the speed of the book at the bottom of the 1.27 m long table?
5.03 m/s
2.85 m/s
2.55 m/s
1.28 m/s
In class, one sophisticated and expensive demonstration the class would see in where I lift the table, so the speed of the book at the bottom of the table is 2.55 m/s. Hence, option C is correct.
What is Kinetic friction?A force that acts across sliding surfaces is referred to it as kinetic friction. A force acting in opposition to the direction of a moving body on the surface is felt. The two materials' kinetic friction will determine how much force is applied.
According to the given data in the question,
mgh - (μmg cosθ)s = 1/2 mv²
v²/2 = (9.8)(1.27)(sin 39.7) - (0.49)(9.8)(1.27)(cos 39.7)
v = 2.55 m/s.
Therefore, the speed of the book will be equal to 2.55 m/s.
To know more about kinetic friction :
https://brainly.com/question/13754413
#SPJ1
Calculate the answer to the correct
number of significant digits.
-3.22
x5.1
You may use a calculator. But remember, not every digit the
calculator gives you is a significant digit!
Enter
The number of significant digits is 6.
What is significant figures?The crucial or important digits that accurately represent the meaning of a certain number are known as the significant figures of that number. 6.658, for instance, has four significant digits. These huge amounts give the numbers accuracy. Additionally, they are known as significant digits.
Given that: -3.22 x 5.1.
The product of -3.22 and 5.1 is 16.442.
In the number 16.442, there have 6 significant figures. Hence, The number of significant digits is 6.
Learn more about significant figures here:
https://brainly.com/question/29153641
#SPJ1
With what velocity should a student of mass 60.0 kg run so that his kinetic energy becomes 270 J?
Answer:
The student's velocity should be 3m/s.
Explanation:
You can find more information about this question here at brainly:
https://brainly.in/question/5531355
May I have Brainliest please? My next rank will be the highest one: A GENIUS! Please help me on this journey to become top of the ranks! I would really appreciate it, and it would make my day! Thank you so much, and have a wonderful rest of your day!
A 0.056 kg sample of an unknown substance is heated to 89.6 °C in a hot water tube. It is then quickly removed and placed into an insulated jar holding 188 ml of water initially at 132.8° F. The final equilibrium temperature of the system is 67° C. What is the specific heat of this unknown substance?
The specific heat of the unknown substance is 6.84 J/gºC
How do I determine the specific heat capacity?First, we shall convert 132.8° F to ° C. Thisis illustrated below:
Temperature (° F) = 132.8 ° FTemperature (° C) =?°C = (°F − 32) × 5/9
°C = (132.8 − 32) × 5/9
°C = 56 °C
Next, we shall determine the heat absorbed by the water. This is illustrated below:
Volume of water (V) = 188 mLDensity of water (d) = 1 g/mLMass of water (M) = dV = 1 × 188 = 188 gInitial temperature (T₁) = 56 °CFinal temperature (T₂) = 67 °CChange in temperature (ΔT) = 67 - 56 = 11 °CSpecific heat capacity of copper (C) = 4.184 J/gºC Heat absorbed (Q) =?Q = MCΔT
Q = 188 × 4.184 × 11
Q = 8652.512 J
Finally, we shall determine the specific heat capacity of the unknown metal. This can be obtained as follow:
Heat absorbed (Q) = 8652.512 JHeat released (Q) = -8652.512 JMass of unknown substance (M) = 0.056 kg = 56 gInitial temperature (T₁) = 89.6 °CFinal temperature (T₂) = 67 °CChange in temperature (ΔT) = 67 - 89.6 = -22.6 °CSpecific heat capacity of unknown substance (C) = ?Q = MCΔT
-8652.512 = 56 × C × -22.6
-8652.512 = C × -1265.6
Divide both sides by -1265.6
C = -8652.512 / -1265.6
C = 6.84 J/gºC
Thus, the specific heat capacity is 6.84 J/gºC
Learn more about specific heat capacity:
https://brainly.com/question/19104255
#SPJ1
A ball is projected with an initial velocity 50m/s at an angle 30 degree from the top of a tower 55m high.calculate the total time the ball was on the air and the maximum horizontal distance
Time of flight = 1.6 s
Horizontal distance = 64 m
What is a projectile motion?Projectile motion is the form of motion experienced by an object or particle projected into a gravitational field, such as from the surface of the Earth, and moves along a curvilinear path only under the action of gravity.
For the given case,
h = vt + ¹/₂gt²
h = height of tower
v = initial velocity
t = time of flight
55 = 50sin30t + ¹/₂9.8t²
55 = 25t + 4.9t²
4.9t² + 25t - 55 = 0
t = 1.6 s
X = vₓt
X = horizontal distance
vₓ = horizontal velocity
t = time of flight
X = (50 x cos30) x 1.6
X = 64 m
To know more about projectile motion visit:
https://brainly.com/question/11049671
#SPJ13
4. A 0.7 kg object has a momentum of 15 kg m/s. What is the object's speed?
Answer:
21.4 m/s
Explanation:
Momentum = m * v
15 kg m/s = .7 * v
v = 15/.7 = 21.4 m/s