Answer:
Energy was added, so the reaction is endothermic.
Explanation:
Answer:
A. Energy was added, so the reaction is endothermic
Explanation:
If the pH of a solution is 7.6, what is the pOH? A. 6.4 B. 8.4 C. 5.4 D. 7.4
Answer:
6.4
Explanation: pH
+
pOH
=
14
So if
pH
=
7.6
then
pOH
=
14
−
pH
=
6.4
Explanation:
Wrote this out spaced so it's more clear.
In the reaction Ca + Cl2 → CaCl2, what is the mole ratio of chlorine to calcium chloride?
Select one:
O a. 2:3
O b. 2:1
O c. 1:2
O d. 1:1
PLEASE HELP ME
Answer:
D. 1:1
Explanation:
For every 1 mole of chlorine (Cl₂), there is one mole of calcium chloride (CaCl₂).
So, the mole ratio of chlorine to calcium chloride is 1:1.
Hope this helps. :)
The mole ratio of chlorine to calcium chloride in the given chemical reaction is 1:1.
What is the stoichiometry?Stoichiometry of the reaction gives idea about the relative amount of moles of reactants and products present in the given chemical reaction.
Given chemical reaction is:
Ca + Cl₂ → CaCl₂
From the stoichiometry of the given reaction it is clear that,
1 mole of chlorine = reacts with 1 mole of calcium chloride
So, mole ratio = Chlorine / calcium chloride = 1:1
Hence required mole ratio is 1:1.
To know more about mole ratio, visit the below link:
https://brainly.com/question/504601
#SPJ2
How many grams of N2 can be produced when 6.50 g of O2
reacts?
Answer:
3.79 g of N2.
Explanation:
We'll begin by writing the balanced equation for the reaction.
This is given below:
4NH3 + 3O2 → 2N2 + 6H2O
Next, we shall determine the mass of O2 that reacted and the mass of N2 produced from the balanced equation.
This is illustrated below:
Molar mass of O2 = 16x2 = 32 g/mol
Mass of O2 from the balanced equation = 3 x 32 = 96 g
Molar mass of N2 = 2x14 = 28 g/mol
Mass of N2 from the balanced equation = 2 x 28 = 56 g
Summary:
From the balanced equation above,
96 g of O2 reacted to produce 56 g of N2.
Finally, we shall determine the mass of N2 produced by reacting 6.50 g of O2.
This can be obtained as follow:
From the balanced equation above,
96 g of O2 reacted to produce 56 g of N2.
Therefore, 6.50 g of O2 will react to produce = (6.50 x 56)/96 = 3.79 g of N2.
Therefore, 3.79 g of N2 were obtained from the reaction..
As Danny was pouring cereal for his breakfast, he noticed that the cereal box says that the cereal contains 5 milligrams of iron per serving. Danny decided to perform an experiment to test this claim. He found that the cereal contains 4.6 milligrams of iron per serving. Based on Danny's measurement, the value reported on the label is ( CORRECT OR INCCORECT) because A: (IT IS DIFFERENT FROM THE VALUE DANNY MEASURED) B: (IT IS REORTED TO THE NEAREST MILLIGRAM) C: (IT USES THE SAME UNITS THAT DANNY USED).
Answer:
Correct, because B it is reported to the nearest miligram
Explanation:
4.6 rounded up is 5
How many moles of Al would be produced from 12.85 moles of Al2O3?
Al2O3 → AL + O2
Select one:
O a. 25.7
O b. 6.43
O c. 19.3
d. 8.61
PLEASE HELP ME
Which lifestyle is most likely to lead to infertility in a male ?
A man who works as a mechanic
A man who works as a computer programmer and sits at desk magority of the day
A semi professional athlete
A man who works for a company’s that applies pesticides to lawns
Answer:
The second on, A man who works as a computer programmer and sits at desk magority of the day.
Explanation:
Answer:
Explanation:
The only answer I can think as being possible is the last one. Pesticides are chemicals that go after unwanted animal life. They do not know that they should not attack human beings.
Infertility could very well be one of the side effects of a pesticide. There are others as well. Some pesticides go after the central nervous system (think mice and rats) and those are dangerous to use and to leave around.
The others all involve occupations that either require authentic abilities or mental astuteness. Neither should affect a man's ability to reproduce.
50 Points for whoever does it and shows their work. Maya has four glasses of milk. The temperature and the amount of milk in each glass are shown: Glass A: 20 grams of milk at 10 °C Glass B: 50 grams of milk at 80 °C Glass C: 20 grams of milk at 50 °C Glass D: 50 grams of milk at 80 °C Which statement is correct?
Answer:
A. 20 grams of milk at 10°C
Explanation:
Since we refrigerate milk, it would be cooler than the room temperature, which standard norm is 25°C. So the milk has to be colder than the room temperature. Therefore, our answer is A.
Answer: A is the correct answer
Explanation:
The temperature of room temperature is more than that and you need to keep it colder, hope this helped!
Sugar can be converted to carbon dioxide and water by burning in air or by metabolic reactions inside living cells. How are these reactions similar and how are they different?
Answer:
These reactions are similar because the process is similar and the products are carbon dioxide they are different because the substances are different to outgo these reactions
Explanation:
Q10. Calcium fluoride can be made from the reaction of calcium metal with fluorine gas. The image shows this reaction. Explain how the product is formed in terms of electron movement and what the final electron configurations are
Answer:
The answer to your question is given below
Explanation:
In this reaction, the calcium metal, Ca loses two electrons to form calcium ion, Ca^2+ and two fluorine atoms, F receives the two electrons to form two fluoride ion, F^-.
This is illustrated by the following equation:
Ca —> Ca^2+ + 2e
2F + 2e –> 2F^-
Ca + 2F + 2e —> Ca^2+ + 2F^- + 2e
Cancel out 2e
Ca + 2F —> Ca^2+ 2F^-
Thus, the electronic configuration can be written as follow:
Before combination:
Calcium, Ca (20) => 2, 8, 8, 2
Two fluorine atom, F (9) => 2, 7 and 2, 7
After combination:
Calcium ion, Ca^2+ => 2, 8, 8
Two fluoride ion, F^- => 2,8 and 2,8
What is the value of the equilibrium constant Kcif the concentration of NO and NOBr are 0.10 M and
the concentration of Br2 is 3.0 M?
2NOBr(8) = 2NO(g) + Br2(g)
Answer:
3
Explanation:
Data obtained from the question include:
Concentration of NO, [NO] = 0.1M
Concentration of NOBr, [NOBr] = 0.1M
Concentration of Br, [Br2] = 3M
Equilibrium constant, Kc =..?
The equilibrium constant, Kc is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, the equilibrium constant, Kc for reaction can be obtained as follow:
2NOBr <==> 2NO + Br2
Kc = [NO]² [Br2] /[NOBr]²
[NO] = 0.1M
[NOBr] = 0.1M
[Br2] = 3M
Kc =..?
Kc = [0.1]² [3] /0.1]²
Kc = 3
Therefore, the equilibrium constant Kc, for the reaction is 3.
Answer:
3
Explanation:
How did the change of stress (adding or removing reactants or products) cause a shift in the equilibrium system of your solutions? Use data to support your answer. Make sure you discuss all four stress changes: Adding a reactant Adding a product Removing a reactant Removing a product
Answer:
When reactant is added, the equilibrium moves in order to reduce this stress which then makes more product. When a product is added, the equilibrium moves in order for reactants to reduce the stress.
Explanation:
:)
It should be noted that when a reactant is added, the equilibrium moves in order to reduce this stress which then makes more product.
It should be noted that a reactant simply means a substance that takes part in a chemical reaction to form products.
When a reactant is added, the equilibrium moves in order to reduce this stress which then makes more product. Also, when a product is added, the equilibrium moves in order for reactants to reduce the stress. This is vital for the reaction.
Learn more about reactants on:
https://brainly.com/question/6421464
Consider preparing ammonia gas by the following reaction:
N2(g) + 3H2(g)
===>
2NH3(g)
If you have 28.02 g of N2 and excess H2, how many grams of NH3(g) can be produced.
6.06 g
14.01 g
34.08 g
68.16 g
28.02 g
Answer:
34.08 g
Explanation:
Take the atomic mass of N=14.0, H=1.0/
no. of moles=mmass/molar mass
no. of moles of N2 used = 28.02 / (14x2)
=1.0007mol
From the equation, the mole ratio of N2 : NH3 = 1: 2,
so one mole of N2 produces 2 moles of NH3.
Using this ratio, we can deduce that the no. of moles of NH3 = 1.0007x2
= 2.001428mol
mass = no. of moles x molar mass
Hence,
mass of NH3 produced = 2.001428 x (14+1x3)
= 34.03
≈C
In this molecule, what's the formal charge on the central O atom?
A. -1
B. -2
C. 0
D. +1
In water, oxygen is covalently bonded to two hydrogen atoms. Oxygen has the formal charge of zero and hydrogens also has the formal charge of zero.
What is formal charge ?Formal charge of an atom is the charge it possess in a compound. The formal charge of an atom is found out from its valence electrons, lone pair of electrons and bond pairs.
The equation of formal charge is written as follows:
Formal charge = Valence electrons - (Lone pair + bond pair)
In water, oxygen covalently bonds to two hydrogen atoms. The bond pair of electrons from oxygen is 2.
number of valence electrons in oxygen = 6
no.of lone pairs = 4
Then FC = 6 - (4 + 2) = 0
Therefore, the formal charge of oxygen in water is zero.
Find more on formal charge:
https://brainly.com/question/11723212
#SPJ2
Nitrogen dioxide and water react to produce nitric acid, HNO3,
and nitrogen oxide.
3NO2(g) + H2O(l) — -→ 2HNO3(aq) + NO(g)
a. How many grams of H20 are required to react with 28.0 g
of NO2?
b. How many grams of NO are produced from 15.8 g of H2O?
c. How many grams of HNO3 are produced from 8.25 g of NOZ?
Answer:
Explanation:
a )
3NO₂(g) + H₂O(l) — -→ 2HNO₃(aq) + NO(g)
3 x 46 g 18 g 2 x 63 g 30 g
138 g of NO₂ requires 18 g of H₂O
28 g of NO₂ requires ( 18 / 138) x 28
= 3.65 g of H₂O.
b )
18 g of H₂O produces 30 g of NO gas
15.8 g of H₂O produces ( 30/18 ) x 15.8
= 26.33 g of NO gas .
c )
138 g of NO₂ produces 126 g of HNO₃
8.25 g of NO₂ produces (126 / 138 ) x 8.25
= 7.53 g of HNO₃
What factors influence the absorption of sunlight at Earth's surface
Answer:
Solar elevation.
Ozone.
Cloud cover.
Ground surface reflectivity.
Altitude.
Aerosols and pollutants.
Direct and diffuse UV.
I'm not sure if this was what you were looking for, but if it helps please mark me as brainliest.
The correct name for molecule I is
Molecule I
I
|
CH3-CH-CH3
a. Iodopropane
b. 2-iodylpropane
c. 2-iodopropane
D. Propyliodine
14. The correct name for molecule III is
Molecule III
F
|
C= CH
——-
a. 2-Fluoroeth 1-yne
b. Fluoroethyne
C. Fluoroethene
D. Methylfluorine
16. Synthetic chlorinated hydrocarbons such as dioxins and furans are usually greater pollution hazard then natural organic substances because synthetic hydrocarbons are
a. More volatile
b. Less water soluble
C. Less Biodegradable
D. More chemically reactive
Question 17.
Sources of pollutants
1. High temperature combustion
2. Pulp and paper industry
3. Pesticides
4. Sour gas plants
Match each source of pollutant as numbered above with its pollutant as listed below. Use each number only once
17. Dioxins/furans
18. SO2(g)
19. Nox(g)
20. Phosphates
Answer:
c). 2-iodopropane
14) C). Fluoroethene
16) D). More chemically reactive
17) 1). High temperature combustion - Dioxins/furans
2). Pulp and paper industry - SO2(g)
3). Pesticides - Phosphates
4). Sour gas plants - Nox(g)
Explanation:
The correct name for molecule I would be '2-iodopropane' where the number 2 reflects the position of iodine. There are three carbons and 8 hydrogen atoms which reflect that it is an alkane compound. In the given carbon chain. In this chain of three carbons, iodine is present on the second carbon. Therefore, option C is the correct answer.
14). The appropriate name for molecule III exemplifies Fluoroethene as it consists of two carbons due to which it belongs to the 'ethane' group and it bears the prefix 'fluoro as it belongs to fluorine group and the suffix '-ene' due to double bond.
16). Synthetic hydrocarbons are 'more chemically reactive' and therefore, it generates greenhouse gases and leads to climate change, global warming, depletion of the ozone layer, etc.
17). 1). Dioxins are generated as a result of high-temperature combustion processes like commercial waste incineration or burning of fuels.
2). Pulp and paper industry releases various gases like nitrogen oxide, sulfur dioxide SO2(g), carbon dioxide, etc.
3). Phosphate is the pollutant released from pesticides that badly affects the fertility of the soil.
4). Nox(g) nitrogen oxide released by sour gas plants and coal-fired emissions is a major contributor to increased greenhouses gases and global warming.
Which one has a greatest mass, one atom of carbon, one atom of hydrogen, or one atom of litium
4. A chemical reaction has the equation 2NaCl (aq) + F2 (g) + 2NaF (s) + Cl2 (g). What type of reaction occurs between NaCl and F2?
A. Double displacement
B. Single displacement
C. Synthesis
D. Decomposition
A chemical reaction has the equation 2NaCl(aq) + F₂ → 2NaF(s) + Cl₂ (g). The reaction type occur between NaCl and F₂ is Single displacement.
Hence, Option (B) is correct answer.
What is a Chemical reaction ?A chemical reaction is a process in which chemical bonds between atoms to break and reorganize, to form other new substances.
Now lets check all options one by one
Option (A): Double displacement
A double displacement is a chemical reaction in which elements are exchange between the two compounds. In the given reaction F₂ is not a compound. so this reaction cannot occur
Hence, option (A) is incorrect.
Option (B): Single displacement
A Single displacement reaction is a chemical reaction in which one element replaces the another element in a compound.
In the given reaction F₂ element replaces with the element Na in a compound NaCl. So this reaction occur.
Hence, option (B) is correct.
Option (C): Synthesis
A synthesis reaction is a chemical reaction where two or more substances react to produce a new compound.
In the given reaction two products are formed NaF which is a compound and Cl₂ which is element. So this reaction cannot occur.
Hence, option (C) is incorrect.
Option (D): Decomposition
A decomposition reaction is a chemical reaction in which one reactant breaks down to form a two or more products.
In the given reaction two reactants are given NaCl and F₂. So this reaction cannot occur.
Hence, option (D) is incorrect.
Thus, from above conclusion we can say that The reaction occurs between NaCl and F₂ is single displacement reaction.
Hence, Option (B) is correct answer.
Learn more about Chemical reaction here: https://brainly.com/question/11231920
#SPJ2
what is a controlled variable for ionic bonds and covalent bonds?
Answer:
controlled variable is a variable that is kept constant during a controlled experiment and covalent bond is a chemical bond formed when two atoms share electrons.
Explanation:
Which process is based on repulsion of oil and water?
Answer:
We can seprate oil and water by the process of seprating funnel
For each of the esters provided, identify the alcohol and the carboxylic acid that reacted.
52. Methyl propanoate+_________
53. Ethyl methanoate+__________
Answer:
52. The alcohol USED => methanol, CH3OH
The carboxylic acid USED => propanoic acid, CH3CH2COOH.
53. The alcohol USED => Ethanol, CH2CH3OH
The carboxylic acid USED => Formic acid, HCOOH.
Explanation:
52. To obtain Methyl propanoate, CH3CH2COOCH3, we simply react propanoic, CH3CH2COOH and methanol, CH3OH together as shown below:
CH3CH2COOH + CH3OH —> CH3CH2COOCH3 + H2O
The alcohol used: methanol, CH3OH
The carboxylic acid used: propanoic acid, CH3CH2COOH.
53. To obtain Ethyl methanoate, HCOOCH2CH3, we simply react
Formic acid, HCOOH and ethanol, CH3CH2OH together as show below:
HCOOH + CH3CH2OH —> HCOOCH2CH3 + H2O
The alcohol USED => Ethanol, CH2CH3OH
The carboxylic acid USED => Formic acid, HCOOH.
(Blank) tells you that the exact momentum and position of a particle can't be known at the same time.
A. The Schrodinger equation
B. Quantum mechanics
C. The uncertainty principle
D. Particle-wave duality
Answer:
The uncertainty principle
Explanation:
Essentially if you measure the momentum of the particle at a given point, then when you go to measure the position it has moved, thus you don't know the position. Vise versa if you measure the position you only capture a still frame of the particle and no information about it's momentum, which will have changed.
Answer: the uncertainly principle
Explanation:
it basically states you can not know both at the same time
What element has the electron configuration 1s^22s^22p^63s^23s^23p^4?
Answer: it’s S
Explanation:
The element with electronic configuration of 1s²2s²2p⁶3s²3p⁴ is sulphur (S)
The correct answer to the question is Option C. S
Electronic configuration is simply defined as the arrangement of electrons around the nucleus of an atom.
With the electronic configuration of an element, we can obtain the name of the element by simply obtaining the total number of electrons in the shells and comparing it with those in the periodic table.
From the question given above,
Electronic configuration => 1s²2s²2p⁶3s²3p⁴
Name of element =?Total electron = 2 + 2 + 6 + 2 + 4 = 16
Thus, the element has 16 electrons. This is assumed to be atomic number of the element.
Comparing the atomic number of the element (i.e 16) with those in the periodic table, the element is Sulphur with the symbol S.
Therefore, the element with electronic configuration of 1s²2s²2p⁶3s²3p⁴ is sulphur (S)
Option C. S gives the correct answer to the question.
Learn more: https://brainly.com/question/6945670
which three events occur when earths convection currents move toward each other
Answer:
Option A, Tectonic plates above the currents move toward each other.
Option C, One plate will submerge beneath another plate.
Option D, A convergent boundary is formed at the site of the collision.
Explanation:
The convection currents are the ones responsible for the movement of the tectonic plates, thus shaping the Earth's appearance with their movement, as well with the structures created by the movement. If the convection currents move toward each other, than the tectonic plates are moving toward each other. That will cause collision between the continents, and convergent boundaries will be formed. If the collision is between two or more continental plates, than they will merge, and from the pressure mountain ranges will start to form, but if there an oceanic plate involved as well, than the oceanic plate will be subducting beneath the continental plate or plates.
Answer:
- Tectonic plates above the currents move toward each other;
- One plate will submerge beneath another plate;
- A convergent boundary is formed at the site of the collision;
The convection currents are the ones responsible for the movement of the tectonic plates, thus shaping the Earth's appearance with their movement, as well with the structures created by the movement. If the convection currents move toward each other, than the tectonic plates are moving toward each other. That will cause collision between the continents, and convergent boundaries will be formed. If the collision is between two or more continental plates, than they will merge, and from the pressure mountain ranges will start to form, but if there an oceanic plate involved as well, than the oceanic plate will be subducting beneath the continental plate or plates.
the sun is 73% hydrogen and 25% helium the rest is other elements what is the percentage of other elements in the sun
Answer:
12%
Explanation:
procedure to find out if the penny is real copper with copper wire
Answer:
Four ways to test a copper penny are given below:-
Explanation:
Firstly, take a quick look only at the color of the penny. Zinc pennies may appear patchy, irregular whereas copper-gold coins may seem more probable to be orange or even chocolate. Secondly, drop your penny on the floor and hear the noise it's making. The copper penny would have a "started to ring" sound in this situation, whereas the zinc penny should "clunk." Third, you can weigh the centimeter. You'll need an accurate scale weighing in grams. The penny of copper will weigh 3.11 grams while the penny of zinc weighs 2.5 grams. In the end, look at the date. If your penny was taken out of circulation before 1982, 95 percent copper and 5 percent zinc will be made. Beginning in 1982, pennies had just 2.5 percent copper and 97.5 percent zinc in them. Pennies from any of the two formulations made in 1982 may be produced.
Bromine water was added dropwise to test tubes containing aqueous solutions of bromide, chloride, and iodide. lodide was oxidized to iodine; bromide and chloride gave no reaction Arrange Br 2 ,Cl 2 ,I 2 in order of their strength as an oxidizing agent.
Answer:
Cl₂ > Br₂ > I₂
Explanation:
An oxidizing agent gains electron for itself by removing electrons from other reactants during a reaction. Oxidation is the loss of electrons. Chlorine can take electron from bromine and chlorine while bromine can take electron from iodine, therefore chlorine is a more oxidizing agent than bromine and iodine while bromine is a more oxidizing agent than iodine.
Oxidizing ability decreases down the group.
Therefore Cl₂ > Br₂ > I₂
A group in the periodic table has the same
A. number of protons.
B. number of neutrons.
C. number of outer shell electrons.
D. shell number.
Hey there! :)
Answer:
C. Number of outer shell electrons.
Explanation:
Groups consist of the vertical columns of the periodic table, such as 1A, 2A, etc. (Not including transition metal groups) which depict the number of valence electrons, or the number of electrons in the atom's outer shell.
For example, Oxygen, which is in group 6A, contains 6 valence (outer shell) electrons.
Answer:
number of outer shell electrons.
Explanation:
How many grams of water are produced when 2.50 mol oxygen reacts with hydrogen?
H2 + O2 + H2O
Select one:
a. 45.0 g
b. 22.5 g
c. 90.0 g
O d. 3.6 g
PLEASE HELP
Answer:
it is 90.0
Explanation:
What qualifications do you need to be a research scientist?
A. High IQ
B. College degree
C. High school diploma
D. Ph.D
Answer:
Ph.D
Explanation:
For the most part, research scientists need a bachelor's degree in a highly associated field. A master's degree or a doctorate is frequently expected.