In a laboratory setting, concentrations for solutions are measured in molarity, which is the number of moles per liter (mol/L). Concentrations are often converted to more common units on the labels of household products. For a particular brand of bleach, the concentration of sodium hypochlorite (NaClO) is reported on the bottle as 7.25% by mass. The following information can thus be used to calculate the molarity of NaClO in the bleach:

• 1L of bleach has a mass of 1,100 grams.

• 7.25% of the mass of bleach is NaClO.

• 1 mol of NaClO has a mass of 74.44 grams.

What is the molarity (mol/L) of NaClO in the bleach?

A.0.097
B.0.93
C.1.07
D.79.75

Answer:

a. without completing 2p stuff...electrons cant go to 3s. the correct configuration is

1s2, 2s2, 2p6, 3s1

b. after 4s, 3d comes not 4d. the correct configuration is 1s2, 2s2, 2p6, 3s2, 4s2, 3d6

c. after 4s, it is 3d and then 4p the correct configuration is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6.

Hope it helps you ｡◕‿◕｡

Answer:

Ba(OH)2 + H2SO3 = BaSO3 + H2O -

Explanation:

Answer:

M =  0.125 M

Explanation:

Given data:

Molarity = ?

Volume of solution = 2 L

Mass of K₂SO₄ = 43.55 g

Solution;

Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.

Formula:

Molarity = number of moles of solute / L of solution

Number of moles of solute:

Number of moles = mass/molar mass

Number of moles = 43.55 g / 174.26 g/mol

Number of moles = 0.25 mol

Molarity:

M =  0.25 mol / 2 L

M =  0.125 M

Answer: Sol:-

Data provided in the question is :-

Atomic mass of isotope -1 = 64 amu

Atomic mass of isotope -2 = 66 amu

Atomic mass of isotope -3 = 67 amu

Atomic mass of isotope -4 = 68 amu

Atomic mass of isotope - 5 = 70 amu

Percentage abundace of isotope - 1 = 48.89 %

Percentage abundance of isotope -2 = 27.81 %

Percentage abundance of isotope - 3 = 4.11%

Percentage abundance of isotope-4 = 18.57%

Percentage abundance of isotope - 5 = 0.62 %

Formula used :-

Average atomic mass of an element =[ {(atomic mass of isotope-1 * percentage abundance of isotope-1) + ( atomic mass of isotope-2 * percentage abundance of isotope -2) + ( atomic mass of isotope -3 * percantege abundance of isotope-3 ) + ( atomic mass of isotope-4 * percentage abundance of isotope-4) + (atomic mass of isotope-5 * percentage abundance of isotope-5)} / 100]

Calculation :-

Put all the value in the formula :-

Average atomic mass of an element = [{(64 * 48.89) + (66 * 27.81) + (67 * 4.11) + (68 * 18.57) + (70 * 0.62)} / 100] amu

= [{(3128.96) + (1835.46) +(257.37) + (1262.76) + (43.4)} / 100] amu

= {(6528.04) / 100} amu

= 65.2804 amu

Average atomic mass of an element is = 65.2804 amu

Then this mass is approximatly equal to atomic mass of zinc so this element would be zinc

atomic mass of zinc = 65.38 \approx 65.2804 amu

There are 90.345 x 10^23 molecules in 15 moles of CO2.

Avogadro's number is the number of units, atoms or molecules in one mole of a substance which is equals to 6.02214076 × 1023. This number is also known as the Avogadro constant.

This means that one mole of a substance is equals to 6.02214076 × 1023 atoms, ions or molecules then 15 moles is equals to 90.345 x 10^23 molecules so we can conclude that there are 90.345 x 10^23 molecules are in 15 moles of CO2.

Learn more about mole here: brainly.com/question/1427235

Answer:

B. The same exact

Explanation:

I think B because in order to be a clone of your parent you have to have the exact same DNA and chromosomes.

Hope this helps :D

A clone has the same exact chromosomes as its parent.

CLONING:

Learn more at: https://brainly.com/question/12483409?referrer=searchResults

Answer:

116.78 grams.

Explanation:

1 mol of Strontium (Sr) = 87.62 grams

1.38 mol of Strontium = x

Cross Multiply

1 * x = 1.38 * 87.62

x = 116.78  grams

Answer:

D. spectator ions.

Explanation:

Hello!

In this case, when going over net ionic equations by which precipitation reactions are analyzed, we can consider the example of lead (II) nitrate with potassium iodide to yield insoluble lead (II) iodide and soluble potassium nitrate according to:

[tex]2KI(aq)+Pb(NO_3)_2(aq)\rightarrow PbI_2(s)+2KNO_3(aq)[/tex]

Whereas aqueous species remain in solution:

[tex]2K^+(aq)+2I^-(aq)+Pb^{2+}(aq)+2(NO_3)^-(aq)\rightarrow PbI_2(s)+2K^+(aq)+2(NO_3)^-(aq)[/tex]

It means that potassium and nitrate ions are spectator ions because they are not involved in the precipitation reaction, which is represented by the net ionic one:

[tex]2I^-(aq)+Pb^{2+}(aq)\rightarrow PbI_2(s)[/tex]

Thus, the answer to this question is D. spectator ions.

Best regards!

Answer:

Acidic solution used to clean a crucible

Explanation:

This liquid dissolves alcoholic solvents such as crucible, that is why it was selected as the ideal for cleaning.

Although it would be ideal to know in detail which chemical compound is the one you want to clean so that the cleaning technique has better effectiveness.

WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.

In conclusion, WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.

Learn more in:

https://brainly.com/question/10281181

its true

Potential energy is the stored or latent energy in an object at rest. It’s fundamental to many physics-related concepts because its laws hold true on any level, from the planetary to the atomic level. The potential energy of an object is measurable.

Answer:

Carbon and oxygen are chemically bonded in it.

Explanation:

The other answer choices do not apply for compounds, but rather for mixtures instead.

Answer:

See explanation

Explanation:

Weathering refers to the breakdown of rocks to form soil. There are several agents of weathering.

In warmer regions, there are more vegetation and microorganisms and they increase the rate of biological weathering.

Since weathering leads to the formation of soil and the rate of weathering is greater in warmer climates, it also follows that as temperature increases and more soil is formed, erosion will happen faster at this higher temperature owing to the presence of more soil compared to colder climates.

There is a huge and direct effect of temperature on the rates of erosion.

The highest rate of weathering occurs in warm and wet climate because in warm and wet climatic regions, more rainfall occurs which increase the rate of weathering. Rainfall and temperature can affect the rate in which rock weathering occurs.

High temperatures and greater rainfall increase the rate of chemical weathering. Rocks in tropical regions exposed to abundant rainfall so we can conclude that hot temperatures weather much faster than similar rocks residing in cold, dry regions.

Learn more: https://brainly.com/question/20929061

Answer:

0.028 mole of ammonium phosphate, (NH₄)₃PO₄.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

H₃PO₄ + 3NH₃ —> (NH₄)₃PO₄

From the balanced equation above,

3 moles of NH₃ reacted to produce 1 mole of (NH₄)₃PO₄.

Finally, we shall determine the number of mole of (NH₄)₃PO₄ produced by the reaction of 0.085 mole of ammonia, NH₃. This can be obtained as follow:

From the balanced equation above,

3 moles of NH₃ reacted to produce 1 mole of (NH₄)₃PO₄.

Therefore, 0.085 mole of NH₃ will react to produce = (0.085 × 1)/3 = 0.028 mole of (NH₄)₃PO₄.

Thus, 0.028 mole of ammonium phosphate, (NH₄)₃PO₄ were obtained from the reaction.

Answer:

Molarity: 0.21M

Molality: 0.20m

Explanation:

...dissolves 3.9g of aniline (C6H5NH2) in 200.mL of a solvent with a density of 1.05 g/mL...

To solve this question, we need to find the moles of aniline in 3.9g using its molar mass. Then, we need to find the kg and Liters of solution in order to find molarity (Moles/L solution) and molality (Moles/kg of solvent):

Moles aniline:

Molar mass:

6C: 6* 12.01g/mol = 72.06g/mol

7H: 7*1.008g/mol = 7.056g/mol

N: 1*14.007g/mol = 14.007g/mol

72.06g/mol+7.056g/mol+14.007g/mol = 93.123g/mol

Moles of 3.9g: 3.9g * (1mol / 93.123g) = 0.04188moles

Liters solution:

200mL * (1L / 1000mL) = 0.200L

kg solvent:

200mL * (1.05g/mL) * (1kg/1000g) = 0.210L

Molarity:

0.04188mol / 0.200L = 0.21M

Molality:

0.04188mol / 0.210L =0.20m

The lethal dose and how ounces of soda in a can of soda is not given, however, the standard lethal dose and volume of soda are given as below:

Lethal dose: 10 gm of caffeine

The volume of soda per can =  12oz/can

Answer:

The correct answer is - 324.254 cans or round up to 325 cans. Ans.

Explanation:

Given:

2.57 mg caffeine / 1oz

12oz / 1can

Lethal dose: 10.0g or 10,000mg of caffeine

Solution:

Caffeine per soda can = (2.57 mg caffeine / 1oz) * (12oz / 1can) = 30.84 mg caffeine / 1can.

lethal dose would be in =

(10,000mg caffeine) * (1can / 30.84 mg caffeine) = 324.254 cans or round up to 325 cans. Ans.

Answer:

D

Explanation:

Answer:

D: Electrical -> mechanical

Explanation:

Hope this helps!

Answer:

well heat travels by conduction, convection, and radiation but I think it's 2.

Explanation:

heat travels to colder things trying to make a balanced temperature for both of the objects.

Answer:

V₂ = 104.76 mL

Explanation:

Given data:

Initial volume = 100.0 mL

Initial temperature = 21°C (21 + 273.15 K = 294.15 K)

Final temperature = 35°C (35 + 273.15 K = 308.15 k)

Final volume = ?

Solution:

Charles Law:

According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.

Mathematical expression:

V₁/T₁ = V₂/T₂

V₁ = Initial volume

T₁ = Initial temperature

V₂ = Final volume  

T₂ = Final temperature

Now we will put the values in formula.

V₁/T₁ = V₂/T₂

V₂ = V₁T₂/T₁  

V₂ =100.0 mL × 308.15 K / 294.15 K

V₂ = 30815 mL.K /294.15 K

V₂ = 104.76 mL

Answer:

color

Explanation:

Answer:

D

Explanation:

The five conditions of chemical change: color chage, formation of a precipitate, formation of a gas, odor change, temperature change and the others are just physical changes that would happen if you change containers, or let it evaporate.

Answer:

Molecules/State

Explanation:

We know from the kinetic molecular theory that matter is made up of molecules. These molecules are in constant motion at various velocities and energies.

The total thermal energy refers to the total kinetic energies of these particles. It depends on the temperature of the system, the energies of the molecules present in the material and the arrangement of the object's molecules (states of matter).

Answer: Percent recovery is 47.34 %

Explanation:

Percent yield is defined as the ratio of experimental yiled to theoretical yield in terms of percentage.

[tex]{\text{ percent yield}}=\frac{\text{amount recovered}}{\text{total amount}}\times 100[/tex]

Putting in the values we get:

[tex]{\text{ percent yield}}=\frac{0.732}{1.546}\times 100=47.34\%[/tex]

Therefore, the percent recovery is 47.34 %

Answer:

1000 kJ.mmole / 1000 J.mole

Explanation:

To solve this, we need to analyze the given data.

We have a number which is 87.1 J/mmole.C (I'm assuming it has the J at the beggining because if not, then you are missing some data) and the final result is kJ/mol.C

The only unit that has not changed in the process was the °C, while the mole and J change respectively. In this case, we need to know the conversion factor of mmole to mole and J to kJ.

In the case of a mole:

1 mole --------> 1000 mmole

In the case of Joule:

1 kJ ----------> 1000 J

So the first thing we will do is to change from J to kJ:

87.1 J * 1 kJ / 1000 J = 0.0871 kJ

Now let's convert mmol to mole:

0.0871 kJ/mmole.C * 1000 mmole / 1 mole = 87.1 kJ/mole.C

As you can see, there's is practicly no change at all with the units, so putting all together it would be:

Hope this helps

Answer: Photosynthesizing organisms use carbon dioxide and water to produce glucose.

Explanation:

Photosynthesis is a phenomenon in which green plants containing chlorophyll use sunlight as a source of energy to convert carbon dioxide and water to form glucose and oxygen.

Photosynthesis is the process used by plants, algae and certain bacteria to convert energy from sunlight and turn it into chemical energy in the form of glucose which is used a s a source of energy by many organisms.

[tex]6CO_2+6H_2O\overset{sunlight}\rightarrow C_6H_{12}O_6+6O_2[/tex]