Answer:
2.20°
Explanation:
For the central bright spot, we will use the constructive pattern for a double slit interference,
[tex]m\times w = d \times Sin\beta[/tex]
where w indicates the wavelength
and [tex]\beta[/tex] indicates the angle between the bright spot and center line.
now we will use the given values,
1 × 500 × 10^-9 = 1.3 × 10^-5 × Sin [tex]\beta[/tex]
Solving for [tex]\beta[/tex],
[tex]\beta[/tex] = 2.204° ~ 2.20°
Therefore the correct answer is 2.20°
Consider a conducting rod of length 31 cm moving along a pair of rails, and a magnetic field pointing perpendicular to the plane of the rails. At what speed (in m /s) must the sliding rod move to produce an emf of 0.75 V in a 1.75 T field?
Answer:
The speed of the rod is 1.383 m/s
Explanation:
Given;
length of the conducting rod, L = 31 cm = 0.31 m
induced emf on the rod, emf = 0.75V
magnetic field around the rod, B = 1.75 T
Apply the following Faraday's equation for electromagnetic induction in a moving rod to determine the speed of the rod.
emef = BLv
where;
B is the magnetic field
L is length of the rod
v is the speed of the rod
v = emf / BL
v = (0.75) / (1.75 x 0.31)
v = 1.383 m/s
Therefore, the speed of the rod is 1.383 m/s
The speed of a sound wave in air is 343m/s. If the density of the air is 1.2kg/m3, find the bulk modulus.
Answer:
141178.8
Explanation:
use : density x velocity²
1.2 x 343² = 141178.8 pa
Briefly describe the relationship between an equipotential surface and an electric field, and use this to explain why we will plot equipotential lines.
Answer:
E = - dV/dx
Explanation:
Las superficies equipòtenciales son superficie donde el potencial eléctrico es constante por lo cual nos podemos desplazaren ella sin realizar nigun trabajo.
El campo electrico es el campo que existen algún punto en el espacio creado por alguna ddistribucion de carga.
De los antes expuesto las dos magnitudes están relacionadas
E = - dV/dx
por lo cual el potenical es el gradiente del potencial eléctrico.
Como el campo eléctrico sobre un superficie equipotenciales constante, podemos colocar una punta de prueba con un potencial dado y seguir la linea que de una diferencia de potencial constar, lo cual permite visualizar las forma de cada linea equipotencial
2. A pair of narrow, parallel slits sep by 0.25 mm is illuminated by 546 nm green light. The interference pattern is observed on a screen situated at 1.3 m away from the slits. Calculate the distance from the central maximum to the
Answer:
for the first interference m = 1 y = 2,839 10-3 m
for the second interference m = 2 y = 5,678 10-3 m
Explanation:
The double slit interference phenomenon, for constructive interference is described by the expression
d sin θ = m λ
where d is the separation between the slits, λ the wavelength and m an integer that corresponds to the interference we see.
In these experiments in general the observation screen is L >> d, let's use trigonometry to find the angles
tan θ = y / L
with the angle it is small,
tan θ = sin θ / cos θ = sin θ
we substitute
sin θ = y / L
d y / L = m λ
the distance between the central maximum and an interference line is
y = m λ L / d
let's reduce the magnitudes to the SI system
λ = 546 nm = 546 10⁻⁹ m
d = 0.25 mm = 0.25 10⁻³ m
let's substitute the values
y = m 546 10⁻⁹ 1.3 / 0.25 10⁻³
y = m 2,839 10⁻³
the explicit value for a line depends on the value of the integer m, for example
for the first interference m = 1
the distance from the central maximum to the first line is y = 2,839 10-3 m
for the second interference m = 2
the distance from the central maximum to the second line is y = 5,678 10-3 m
_____________ friction is the interlocking of surfaces due to irregularities on the surfaces preventing those surfaces from moving/sliding against each other. For surfaces moving/sliding on each other, ___________ friction overwhelms kinetic friction to that movement/sliding. Kinetic friction is alway larger than ____________ friction. Kinetic friction is alway equal to _________ friction.
Answer:
STATIC, STATIC
KINETIC friction is less than static friction
Explanation:
In this exercise you are asked to complete the sentences with the correct words.
STATIC friction prevents the relative movement of two surfaces in contact.
For moving surfaces the friction is STATIC is greater than the kinetic friction.
For the last two sentences I think they are misspelled, the correct thing is
KINETIC friction is less than static friction
A 1.5-kg mass attached to spring with a force constant of 20.0 N/m oscillates on a horizontal, frictionless track. At t = 0, the mass is released from rest at x = 10.0 cm. ( That is, the spring is stretched by 10.0 cm.) (a) Determine the frequency of the oscillations. (b) Determine the maximum speed of the mass. Where dos the maximum speed occur? (c) Determine the maximum acceleration of the mass. Where does the maximum acceleration occur? (d) Determine the total energy of teh oscillating system. (e) Express the displacement as a function of time.
Answer:
(a) f = 0.58Hz
(b) vmax = 0.364m/s
(c) amax = 1.32m/s^2
(d) E = 0.1J
(e) [tex]x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]
Explanation:
(a) The frequency of the oscillation, in a spring-mass system, is calulated by using the following formula:
[tex]f=\frac{1}{2\pi}\sqrt{\frac{k}{m}}[/tex] (1)
k: spring constant = 20.0N/m
m: mass = 1.5kg
you replace the values of m and k for getting f:
[tex]f=\frac{1}{2\pi}\sqrt{\frac{20.0N/m}{1.5kg}}=0.58s^{-1}=0.58Hz[/tex]
The frequency of the oscillation is 0.58Hz
(b) The maximum speed is given by:
[tex]v_{max}=\omega A=2\pi f A[/tex] (2)
A: amplitude of the oscillations = 10.0cm = 0.10m
[tex]v_{max}=2\pi (0.58s^{-1})(0.10m)=0.364\frac{m}{s}[/tex]
The maximum speed of the mass is 0.364 m/s.
The maximum speed occurs when the mass passes trough the equilibrium point of the oscillation.
(c) The maximum acceleration is given by:
[tex]a_{max}=\omega^2A=(2\pi f)^2 A[/tex]
[tex]a_{max}=(2\pi (0.58s^{-1}))(0.10m)=1.32\frac{m}{s^2}[/tex]
The maximum acceleration is 1.32 m/s^2
The maximum acceleration occurs where the elastic force is a maximum, that is, where the mass is at the maximum distance from the equilibrium point, that is, the acceleration.
(d) The total energy of the system is:
[tex]E=\frac{1}{2}kA^2=\frac{1}{2}(20.0N/m)(0.10m)^2=0.1J[/tex]
The total energy is 0.1J
(e) The displacement as a function of time is:
[tex]x(t)=Acos(\omega t)=Acos(2\pi ft)\\\\x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]
If, instead, the ball is revolved so that its speed is 3.7 m/s, what angle does the cord make with the vertical?
Complete Question:
A 0.50-kg ball that is tied to the end of a 1.5-m light cord is revolved in a horizontal plane, with the cord making a 30° angle with the vertical.
(a) Determine the ball’s speed. (b) If, instead, the ball is revolved so that its
speed is 3.7 m/s, what angle does the cord make with the vertical?
(Check attached image for the diagram.)
Answer:
(a) The ball’s speed, v = 2.06 m/s
(b) The angle the cord makes with the vertical is 50.40⁰
Explanation:
If the ball is revolved in a horizontal plane, it will form a circular trajectory,
the radius of the circle, R = Lsinθ
where;
L is length of the string
The force acting on the ball is given as;
F = mgtanθ
This above is also equal to centripetal force;
[tex]mgTan \theta = \frac{mv^2}{R} \\\\Recall, R = Lsin \theta\\\\mgTan \theta = \frac{mv^2}{Lsin \theta}\\\\v^2 = glTan \theta sin \theta\\\\v = \sqrt{glTan \theta sin \theta} \\\\v = \sqrt{(9.8)(1.5)(Tan30)(sin30)} \\\\v = 2.06 \ m/s[/tex]
(b) when the speed is 3.7 m/s
[tex]v = \sqrt{glTan \theta sin \theta} \ \ \ ;square \ both \ sides\\\\v^2 = glTan \theta sin \theta\\\\v^2 = gl(\frac{sin \theta}{cos \theta}) sin \theta\\\\v^2 = \frac{gl*sin^2 \theta}{cos \theta} \\\\v^2 = \frac{gl*(1- cos^2 \theta)}{cos \theta}\\\\gl*(1- cos^2 \theta) = v^2cos \theta\\\\(9.8*1.5)(1- cos^2 \theta) = (3.7^2)cos \theta\\\\14.7 - 14.7cos^2 \theta = 13.69cos \theta\\\\14.7cos^2 \theta + 13.69cos \theta - 14.7 = 0 \ \ \ ; this \ is \ quadratic \ equation\\\\[/tex]
[tex]Cos\theta = \frac{13.69\sqrt{13.69^2 -(-4*14.7*14.7)} }{14.7} \\\\Cos \theta = 0.6374\\\\\theta = Cos^{-1}(0.6374)\\\\\theta = 50.40 ^o[/tex]
Therefore, the angle the cord makes with the vertical is 50.40⁰
can I get help please?
a 5.0 charge is placed at the 0 cm mark of a meterstick and a -4.0 charge is placed at the 50 cm mark. what is the electric field at the 30 cm mark
Answer:
-1748*10^N/C
Explanation:
See attached file
What will be the volume and density of stone if mass of stone is 10 gram .please tell the answer fast it's very urgent I will mark as a brain me answer if you will answer it correct.
Answer:
[tex]\large \boxed{\text{3.3 cm}^{3}}[/tex]
Explanation:
Assume the stone consists of basalt, which has a density of 3.0 g/cm³.
[tex]\rho = \text{10 g}\times\dfrac{\text{1 cm}^{3}}{\text{3.0 g}} = \text{3.3 cm}^{3}\\\\\text{The volume of the stone is $\large \boxed{\textbf{3.3 cm}^{3}}$}[/tex]
The electric field at the surface of a charged, solid, copper sphere with radius 0.220 mm is 4200 N/CN/C, directed toward the center of the sphere. What is the potential at the center of the sphere, if we take the potential to be zero infinitely far from the sphere?
Answer:
The potential at the center of the sphere is -924 V
Explanation:
Given;
radius of the sphere, R = 0.22 m
electric field at the surface of the sphere, E = 4200 N/C
Since the electric field is directed towards the center of the sphere, the charge is negative.
The Potential is the same at every point in the sphere, and it is given as;
[tex]V = \frac{1}{4 \pi \epsilon_o} \frac{q}{R}[/tex] -------equation (1)
The electric field on the sphere is also given as;
[tex]E = \frac{1}{4 \pi \epsilon _o} \frac{|q|}{R^2}[/tex]
[tex]|q |= 4 \pi \epsilon _o} R^2E[/tex]
Substitute in the value of q in equation (1)
[tex]V = \frac{1}{4 \pi \epsilon_o} \frac{-(4 \pi \epsilon _o R^2E)}{R} \ \ \ \ q \ is \ negative\ because \ E \ is\ directed \ toward \ the \ center\\\\V = -RE\\\\V = -(0.22* 4200)\\\\V = -924 \ V[/tex]
Therefore, the potential at the center of the sphere is -924 V
Three wires meet at a junction. Wire 1 has a current of 0.40 A into the junction. The current of wire 2 is 0.75 A out of the junction. How many electrons per second move past a point in wire 3?
Answer:
number of electrons = 2.18*10^18 e
Explanation:
In order to calculate the number of electrons that move trough the second wire, you take into account one of the Kirchoff's laws. All the current that goes inside the junction, has to go out the junction.
Then, if you assume that the current of the wire 1 and 3 go inside the junction, then, all this current have to go out trough the second junction:
[tex]i_1+i_3=i_2[/tex] (1)
i1 = 0.40 A
i2 = 0.75 A
you solve the equation i3 from the equation (1):
[tex]i_3=i_2-i_1=0.75A-0.40A=0.35A[/tex]
Next, you take into account that 1A = 1C/s = 6.24*10^18
Then, you have:
[tex]0.35A=0.35\frac{C}{s}=0.35*\frac{6.24*10^{18}e}{s}=2.18*10^{18}\frac{e}{s}[/tex]
The number of electrons that trough the wire 3 is 2.18*10^18 e/s
Alternating Current In Europe, the voltage of the alternating current coming through an electrical outlet can be modeled by the function V 230 sin (100t), where tis measured in seconds and Vin volts.What is the frequency of the voltage
Answer:
[tex]\frac{50}{\pi }[/tex]Hz
Explanation:
In alternating current (AC) circuits, voltage (V) oscillates in a sine wave pattern and has a general equation as a function of time (t) as follows;
V(t) = V sin (ωt + Ф) -----------------(i)
Where;
V = amplitude value of the voltage
ω = angular frequency = 2 π f [f = cyclic frequency or simply, frequency]
Ф = phase difference between voltage and current.
Now,
From the question,
V(t) = 230 sin (100t) ---------------(ii)
By comparing equations (i) and (ii) the following holds;
V = 230
ω = 100
Ф = 0
But;
ω = 2 π f = 100
2 π f = 100 [divide both sides by 2]
π f = 50
f = [tex]\frac{50}{\pi }[/tex]Hz
Therefore, the frequency of the voltage is [tex]\frac{50}{\pi }[/tex]Hz
An automobile accelerates from zero to 30 m/s in 6 s. The wheels have a diameter of 0.4 m. What is the angular acceleration of each wheel
Answer:
12.5 rad/s²
Explanation:
Angular Acceleration: This can be defined as the ratio of linear acceleration and radius. The S.I unit is rad/s²
From the question,
a = αr................... Equation 1
Where a = linear acceleration, α = angular acceleration, r = radius.
But,
a = (v-u)/t.............. Equation 2
Where v = final velocity, u = initial velocity, t = time.
Substitute equation 2 into equation 1
(v-u)/t = αr
make α the subject of the equation
α = (v-u)/tr................. Equation 3
Given: v = 30 m/s, u = 0 m/s, t = 6 s, r = 0.4 m
Substitute into equation 3
α = (30-0)/(0.4×6)
α = 30/2.4
α = 12.5 rad/s²
At t = 0, a battery is connected to a series arrangement of a resistor and an inductor. If the inductive time constant is 36.0 ms, at what time is the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field?
Answer:
The rate at which energy is dissipated in the resistor is equal to the rate at which energy is stored in the inductor's magnetic field in 24.95 ms.
Explanation:
The energy stored in the inductor is given as
E₁ = ½LI²
The rate at which energy is stored in the inductor is
(dE₁/dt) = (d/dt) (½LI²)
Since L is a constant
(dE₁/dt) = ½L × 2I (dI/dt) = LI (dI/dt)
(dE₁/dt) = LI (dI/dt)
Rate of Energy dissipated in a resistor = Power = I²R
(dE₂/dt) = I²R
When the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field
(dE₁/dt) = (dE₂/dt)
OK (dI/dt) = I²R
L (dI/dt) = IR
Current in a this kind of series setup of inductor and resistor at any time, t, is given as
I = (V/R) (1 - e⁻ᵏᵗ)
k = (1/time constant) = (R/L)
(dI/dt) = (kV/R) e⁻ᵏᵗ = (RV/RL) e⁻ᵏᵗ = (V/L) e⁻ᵏᵗ
L (dI/dt) = IR
L [(V/L) e⁻ᵏᵗ] = R [(V/R) (1 - e⁻ᵏᵗ)
V e⁻ᵏᵗ = V (1 - e⁻ᵏᵗ)
e⁻ᵏᵗ = 1 - e⁻ᵏᵗ
2 e⁻ᵏᵗ = 1
e⁻ᵏᵗ = (1/2) = 0.5
e⁻ᵏᵗ = 0.5
In e⁻ᵏᵗ = In 0.5 = -0.69315
- kt = -0.69315
kt = 0.69315
k = (1/time constant)
Time constant = 36.0 ms = 0.036 s
k = (1/0.036) = 27.78
27.78t = 0.69315
t = (0.69315/27.78) = 0.02495 = 24.95 ms
Hope this Helps!!!
A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct
Complete question:
A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct?
A. the interior field points in a direction parallel to the exterior field
B. There is no electric field on the interior of the conducting sphere.
C. The interior field points in a direction perpendicular to the exterior field.
D. the interior field points in a direction opposite to the exterior field.
Answer:
B. There is no electric field on the interior of the conducting sphere.
Explanation:
Conductors are said to have free charges that move around easily. When the conductor is now placed in a static electric field, the free charges react to attain electrostatic equilibrium (steady state).
Here, a solid conducting sphere is placed in an external uniform electric field. Until the lines of the electric field are perpendicular to the surface, the free charges will move around the spherical conductor, causing polarization. There would be no electric field in the interior of the spherical conductor because there would be movement of free charges in the spherical conductor in response to any field until its neutralization.
Option B is correct.
There is no electric field on the interior of the conducting sphere.
The density of a sample of metal was measured to be 8.91 g/cm3. An X-ray diffraction experiment measures the edge of a face-centered cubic cell as 352.4 pm. Part APart complete What is the atomic weight of the metal
Answer:
The atomic weight of the metal is 58.7 g/mol
Explanation:
Given;
density of the metal sample, ρ = 8.91 g/cm³
edge length of the face centered cubic cell, α = 352.4 pm = 352.4 x 10⁻¹⁰ cm
Volume of the unit cell of the metal;
V = α³
V = (352.4 x 10⁻¹⁰ cm)³
V = 4.376 x 10⁻²³ cm³
Mass of the metal in unit cell
mass = density x volume
mass = 8.91 g/cm³ x 4.376 x 10⁻²³ cm³
mass = 3.899 x 10⁻²² g
Atomic weight, based on 4 atoms per unit cell;
4 atoms = 3.899 x 10⁻²² g
6.022 x 10²³ atoms = ?
= (6.022 x 10²³atoms x 3.899 x 10⁻²² g) / (4 atoms)
= 58.699 g/mol
= 58.7 g/mol (this metal is Nickel)
Theerefore, the atomic weight of the metal is 58.7 g/mol
6. Two forces of 50 N and 30 N, respectively, are acting on an object. Find the net force (in
N) on the object if
the forces are acting in the same direction
b. the forces are acting in opposite directions.
Answer:
same direction = 80 (n)
opposite direction = 20 (n) going one direction
Explanation:
same direction means they are added to each other
and opposite means acting on eachother
what is the preferred method of using percentage data by using a circle divided into sections
Answer:
A pie chart is a type of graph in which a circle is divided into sectors that each represents a proportion of the whole
Explanation:
pie charts are a useful way to organize data in order to see the size of components relative to the whole.
An elastic band is hung on a hook and a mass is hung on the lower end of the band. When the mass is pulled downward and then released, it vibrates vertically. The equation of motion is s = 9 cos(t) + 9 sin(t), t ≥ 0, where s is measured in centimeters and t in seconds. (Take the positive direction to be downward.) (a) Find the velocity and acceleration at time t.
Answer:
v(t) = s′(t) = −9sin(t)+9cos(t)
a(t) = v′(t) = −9cos(t) −9sin(t)
Explanation:
Given that
s = 9 cos(t) + 9 sin(t), t ≥ 0
Then acceleration and velocity is
v(t) = s′(t) = −9sin(t)+9cos(t)
a(t) = v′(t) = −9cos(t) −9sin(t)
The compressor of an air conditioner draws an electric current of 16.2 A when it starts up. If the start-up time is 1.45 s long, then how much electric charge passes through the circuit during this period
Answer:
Q = 23.49 C
Explanation:
We have,
Electric current drawn by the air conditioner is 16.2 A
Time, t = 1.45 s
It is required to find the electric charge passes through the circuit during this period. We know that electric current is defined as the electric charge flowing per unit time. So,
[tex]I=\dfrac{q}{t}\\\\q=It\\\\q=16.2\times 1.45\\\\q=23.49\ C[/tex]
So, the charge of 23.49 C is passing through the circuit during this period.
Muons are elementary particles that are formed high in the atmosphere by the interactions of cosmic rays with atomic nuclei. Muons are radioactive and have average lifetimes of about two-millionths of a second. Even though they travel at almost the speed of light, they have so far to travel through the atmosphere that very few should be detected at sea level - at least according to classical physics. Laboratory measurements, however, show that muons in great number do reach the earth's surface. What is the explanation?
Answer:
Muons reach the earth in great amount due to the relativistic time dilation from an earthly frame of reference.
Explanation:
Muons travel at exceedingly high speed; close to the speed of light. At this speed, relativistic effect starts to take effect. The effect of this is that, when viewed from an earthly reference frame, their short half life of about two-millionth of a second is dilated. The dilated time, due to relativistic effects on time for travelling at speed close to the speed of light, gives the muons an extended relative travel time before their complete decay. So in reality, the muon do not have enough half-life to survive the distance from their point of production high up in the atmosphere to sea level, but relativistic effect due to their near-light speed, dilates their half-life; enough for them to be found in sufficient amount at sea level.
a fly undergoes a displacement of - 5.80 while accelerating at -1.33 m/s^2 for 4.22 s. what was the initial velocity of the fly?
Answer:
[tex]v_i = 1.44\frac{m}{s}[/tex]
Explanation:
The computation of the initial velocity of the fly is shown below:-
But before that we need to do the following calculations
For 4.22 seconds
[tex]\bar v = \frac{-5.80 m}{4.22 s}[/tex]
[tex]= -1.37\frac{m}{s}[/tex]
For uniform acceleration
[tex]\bar v = \frac{v_i +v_f}{2}[/tex]
[tex]= v_i + v_f[/tex]
[tex]= -2.74\frac{m}{s}[/tex]
With initial and final velocities
[tex]= -1.33\frac{m}{s^2}[/tex]
[tex]= \frac{v_i +v_f}{4.22s}[/tex]
[tex]= -v_i + v_f[/tex]
[tex]= -5.61\frac{m}{s}[/tex]
So, the initial velocity is
[tex]v_i = 1.44\frac{m}{s}[/tex]
We simply applied the above steps to reach at the final solution i.e initial velocity
find the value of k for which the given pair of vectors are not equal
2ki +3j and 8i + 4kj
Answer:
5
Explanation:
Calculate the ideal banking angle in degrees for a gentle turn of 1.88 km radius on a highway with a 136.3 km/hr speed limit, assuming everyone travels at the speed limit.
Answer:
Ф = 4.4°Explanation:
given:
radius (r) = 1.88 km
velocity (v) = 136.3 km/hr
required:
banking angle ∡ ?
first:
convert 1.88 km to m = 1.88km * 1000m / 1km
r = 1880 m
convert velocity v = 136.3 km/hr to m/s = 136.3 km/hr * (1000 m/ 3600s)
v = 37.86 m/s
now.. calculate the angle
Ф = inv tan (v² / r * g) we know that gravity = 9.8 m/s²
Ф = inv tan (37.86² / (1880 * 9.8))
Ф = 4.4°
what is the difference between a good conductor and a good insulator?
Answer:
Explanation:
In a conductor, electric current can flow freely, in an insulator it cannot.
Metals such as copper typify conductors, while most non-metallic solids are said to be good insulators, having extremely high resistance to the flow of charge through them.
Most atoms hold on to their electrons tightly and are insulators.
Please Help!!! I WILL GIVE BRAINLIEST!!!! An electron is in motion at 4.0 × 10^6 m/s horizontally when it enters a region of space between two parallel plates, starting at the negative plate. The electron deflects downwards and strikes the bottom plate. The magnitude of the electric field between the plates is 4.0 x 10^2 N/C and separation between the charged plates is 2.0 cm. a.) Determine the horizontal distance traveled by the electron when it hits the plate. b.)Determine the velocity of the electron as it strikes the plate.
Answer:
Explanation:
Given that
speed u=4*10^6 m/s
electric field E=4*10^3 N/c
distance b/w the plates d=2 cm
basing on the concept of the electrostatices
now we find the acceleration b/w the plates
acceleration a=qE/m=1.6*10^-19*4*10^3/9.1*10^-31=0.7*10^15 =7*10^14 m/s
now we find the horizantal distance travelled by electrons hit the plates
horizantal distance X=u[2y/a]^1/2
=4*10^6[2*2*10^-2/7*10^14]^1/2
=3*10^-2=3 cm
now we find the velocity f the electron strike the plate
v^2-(4*10^6)^2=2*7*10^14*2*10^-2
v^2=16*10^12+28*10^12
v^2=44*10^12
speed after hits =>V=6.6*10^6 m/s
please help In a video game, a ball moving at 0.6 meter/second collides with a wall. After the collision, the velocity of the ball changed to -0.4 meter/second. The collision takes 0.2 seconds to occur. What’s the acceleration of the ball during the collision? Use . a= v-u/t
Answer:
the acceleration during the collision is: - 5 [tex]\frac{m}{s^2}[/tex]
Explanation:
Using the formula:
[tex]a=\frac{\Delta\,v}{\Delta\,t}[/tex]
we get:
[tex]a=\frac{-0.4-0.6}{0.2} \,\frac{m}{s^2} =\frac{-1}{0.2} \,\frac{m}{s^2} =-5\,\,\frac{m}{s^2}[/tex]
How fast must a 2500-kg elephant move to have the same kinetic energy as a 67.0-kg sprinter running at 15.0 m/s
Answer:
2.45 m/s
Explanation:
kinetic energy = 1/2 * m * v^2
then, 0.5 * 2500 * x^2 = 0.5 * 67 * 15^2
by solving for x, X = 2.45 m/s
When the pivot point of a balance is not at the center of mass of the balance, how is the net torque on the balance calculated
Answer:
It is calculated as Force × perpendicular distance.
Explanation:
Torque is a rotational force and twisting force that can cause an object to rotate in it's axis. This cause angular rotation.
The torque due to gravity on a body about its centre of mass is zero because the centre of mass is the that point of the body at which the force acts by the gravity that is mg.
But if the pivot point of a balance is not at the centre of mass of the balance, it will be FORCE × PERPENDICULAR DISTANCE because at that point, there is no centre in which the force act on a body by gravity. The distance and force will be use to calculate.