in an analysis testing differences between an experimental and a control group on the dependent variable, a p-value of 0.07 means there is a

The process time of the system is 32 min/unit.

According to the investment, after 15 years, the balance in the account would be $1185.

To calculate the final balance after 15 years, we can use the formula for simple interest:

Simple Interest = Principal x Interest Rate x Time

In this case, the principal is $600, the interest rate is 6.5%, and the time is 15 years.

Simple Interest = $600 x 0.065 x 15

Simple Interest = $585

So the investment of $600 earns $585 in simple interest over 15 years. To find the final balance, we add the interest earned to the initial investment:

Final Balance = Principal + Simple Interest

Final Balance = $600 + $585

Final Balance = $1185

To know more about investment here

https://brainly.com/question/365124

#SPJ4

Step-by-step explanation:

Again, using similar triangle ratios

7.2 m  is to 2.4 m  

     as   AB is to  12.0 m

7.2 / 2.4  = AB/12.0    Multiply both sides of the equation by 12

12 *   7.2 / 2.4   = AB = 36.0 meters

It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.

The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.

Learn more about rotational speed here: brainly.com/question/17025846

#SPJ11

Sampled 200 delinquent credit card accounts instead of 100, the margin of error would decrease.

Sampled 200 delinquent credit card accounts, the margin of error for the sample mean at a 95% confidence level would be $80.164.

Smaller than the margin of error we found earlier for a sample size of 100.

The margin of error for the sample means at a 95% confidence level, we need to use the formula:
[tex]Margin of error = z\times (standard deviation / square root of sample size)[/tex]
[tex]z\times[/tex] is the z-score for the 95% confidence level, which is 1.96.
So, plugging in the given values, we get:
[tex]Margin of error = 1.96 \times  (578 / \sqrt 100)[/tex]
[tex]Margin of error = 1.96 \times 57.8[/tex]
Margin of error = 113.008
Therefore, the margin of error for the sample mean at a 95% confidence level is $113.008.
Repeated samples of 100 delinquent credit card accounts and computed the sample mean each time, we would expect the true population mean to be within $113.008 of our sample mean about 95% of the time.
The margin of error is inversely proportional to the square root of the sample size. So, as the sample size increases, the margin of error decreases.
To see this, let's plug in the new sample size into the margin of error formula:
[tex]Margin of error = 1.96 \times (578 / \sqrt 200)[/tex]
[tex]Margin of error = 1.96 \times 40.9[/tex]
Margin of error = 80.164

For similar questions on Margin

https://brainly.com/question/30404882

#SPJ11

The MAD of the hourly wages given would be $ 0.48. The range would be $ 2.00. Q1 would be $8.25. Q3 would then be $9.25. The IQR would be $1.00

Calculate the MAD:

First, find the mean of the data set:

mean = (sum of all values) / (number of values)

mean = (8.25 + 8.50 + 9.25 + 8.00 + 10.00 + 8.75 + 8.25 + 9.50 + 8.50 + 9.00) / 10

mean = 88.00 / 10 = 8.80

Then, find the mean of these absolute deviations:

MAD = (sum of absolute deviations) / (number of values)

MAD = (0.55 + 0.30 + 0.45 + 0.80 + 1.20 + 0.05 + 0.55 + 0.70 + 0.30 + 0.20) / 10

MAD = 4.10 / 10 = 0.41

Calculate the range:

range = maximum value - minimum value

range = 10.00 - 8.00 = 2.00

Find Q1 and Q3:

{8.00, 8.25, 8.25, 8.50, 8.50, 8.75, 9.00, 9.25, 9.50, 10.00}

Q1 is the median of the lower half, and Q3 is the median of the upper half.

Lower half: {8.00, 8.25, 8.25, 8.50, 8.50}

Upper half: {8.75, 9.00, 9.25, 9.50, 10.00}

Q1 = median of lower half = 8.25

Q3 = median of upper half = 9.25

Calculate the IQR:

IQR = Q3 - Q1

IQR = 9.25 - 8.25 = 1.00

Find out more on MAD at https://brainly.com/question/3250070

#SPJ1

The bigger engine is larger than the smaller one by 235.4724 cubic centimeters.

We know that 1 inch=2.54 centimeters

Then 1 cubic inches-(2.54)^3 cubic centimeters

We have that:

⇒ 1 cubic inches=(2.54)3 = 16.3870 cubic centimeters

⇒350 cubic inches= 350 x 16.3870 = 5735.4724 cubic centimeters

Since, the other displaces 5,500 cubic centimeters  and 5735.4724< 5500. The difference between them is:

= 5735.4724 - 5500

= 235.4724

Hence, the bigger engine larger than the smaller one by 235.4724 cubic centimeters.

Read more about Engine size

brainly.com/question/14439953

#SPJ1

In a standard additions method workup the information from the linear regression that is most closely related to the unknown concentration is this:  the intercept of the linear regression line.

In the standard additions method workup, the information that is most closely related to the unknown concentration is the intercept of the linear regression line.

The reason why this is the case is that the intercept represents the y-value of the regression line where the line crosses the y-axis. This y-axis is the value of the dependent variable when the independent variable or concentration is zero. So, by solving for the intercept, we can determine the concentration of the unknown sample.

Learn more about linear regression here:

https://brainly.com/question/25987747

#SPJ1

[tex]~~~~~~ \stackrel{ \textit{\LARGE Bank A} }{\textit{Simple Interest Earned}} \\\\ I = Prt\qquad \begin{cases} I=\textit{interest earned}\\ P=\textit{original amount deposited}\dotfill & \$1810\\ r=rate\to 2.5\%\to \frac{2.5}{100}\dotfill &0.025\\ t=years\dotfill &5 \end{cases} \\\\\\ I = (1810)(0.025)(5) \implies I = 226.25 \\\\[-0.35em] ~\dotfill[/tex]

[tex]~~~~~~ \stackrel{ \textit{\LARGE Bank B} }{\textit{Compound Interest Earned Amount}} \\\\ A=P\left(1+\frac{r}{n}\right)^{nt} \quad \begin{cases} A=\textit{accumulated amount}\\ P=\textit{original amount deposited}\dotfill &\$1810\\ r=rate\to 2.5\%\to \frac{2.5}{100}\dotfill &0.025\\ n= \begin{array}{llll} \textit{times it compounds per year}\\ \textit{monthly, thus twelve} \end{array}\dotfill &12\\ t=years\dotfill &5 \end{cases}[/tex]

[tex]A = 1810\left(1+\frac{0.025}{12}\right)^{12\cdot 5} \implies A \approx 2050.73~\hfill \underset{ interest }{\stackrel{2050.73~~ - ~~1810 }{\approx 240.73}} \\\\[-0.35em] ~\dotfill\\\\ 240.73~~ - ~~226.25 ~~ \approx ~~ \text{\LARGE 14.48}[/tex]

The estimated regression equation for the given data is y = -30.7 + 3.409x

To develop an estimated regression equation for the given data, we need to use the method of least squares.

The formula for the slope of the regression line is given by:

b = ∑(xi - x)(yi - y) / ∑(xi - x)²

where xi and yi are the individual values of the two variables, x and y are their respective means.

The formula for the intercept of the regression line is given by:

a = y - b × x

where a is the intercept and b is the slope.

Using the given data, we can calculate the values of x, y, b, and a as follows

x = (6 + 11 + 15 + 18 + 20) / 5 = 14

y = (7 + 9 + 12 + 21 + 30) / 5 = 15.8

∑(xi - x)(yi - y) = (6 - 14)(7 - 15.8) + (11 - 14)(9 - 15.8) + (15 - 14)(12 - 15.8) + (18 - 14)(21 - 15.8) + (20 - 14)(30 - 15.8) = 306.8

∑(xi - x)² = (6 - 14)² + (11 - 14)² + (15 - 14)² + (18 - 14)² + (20 - 14)² = 90

b = ∑(xi - x)(yi - y) / ∑(xi - x)² = 306.8 / 90 = 3.409

a = y - b × x = 15.8 - 3.409 × 14 = -30.7

Learn more about regression equation here

brainly.com/question/14184702

#SPJ4

The given question is incomplete, the complete question is:

Given are data for two variables, x and y. Develop an estimated regression equation for these data.

The radius of the water bottle which is in cylindrical shape is approximately 2.12 cm.

A cylinder is a three-dimensional shape that consists of two congruent, parallel circular bases that are connected by a curved lateral surface. The lateral surface of the cylinder is formed by a rectangle that is wrapped around the circular bases.

A cylinder can be thought of as a circular prism, where the bases are circles and the lateral surface is curved. The height of a cylinder is the perpendicular distance between the two bases, and the radius is the distance from the center of the base to the edge of the circular base.

The formula for the volume of a cylinder is V = πr^2h, where V is the volume, r is the radius, and h is the height. We can rearrange this formula to solve for the radius:

r = √(V/πh)

Substituting the given values, we have:

r = √(150/π(8.9))

r ≈ 2.12 cm (rounded to two decimal places)

Therefore, the radius of the water bottle is approximately 2.12 cm.

To know more about the Cylinder visit:

brainly.com/question/15891031

#SPJ1

To compute the covariance matrix of the variables in the data, the "matrix-operation" which should be used is ([tex]X^{t}[/tex] × X)/n.

The "Covariance" matrix is defined as a symmetric and positive semi-definite, with the entries representing the covariance between pairs of variables in the data.

The "diagonal-entries" represent the variances of individual variables, and the off-diagonal entries represent the covariances between pairs of variables.

Step(1) : Compute the transpose of the centered data matrix X, denoted as [tex]X^{t}[/tex]. The "transpose" of a matrix is found by inter-changing its rows and columns.

Step(2) : Compute the "dot-product" of [tex]X^{t}[/tex] with itself, denoted as [tex]X^{t}[/tex] × X.

The dot product of two matrices is computed by multiplying corresponding entries of the matrices and summing them up.

Step(3) : Divide the result obtained in step(2) by the number of samples in the data, denoted as "n", to get the covariance matrix.

This step scales the sum of the products by 1/n, which is equivalent to taking the average.

So, the covariance matrix "C" of variables in "centered-data" matrix X can be expressed as: C = ([tex]X^{t}[/tex] × X)/n.

Learn more about Covariance Matrix here

https://brainly.com/question/30481066

#SPJ4

The given question is incomplete, the complete question is

Let X be a matrix of centered data with a column for each field in the data and a row for each sample. Then, not including a scalar multiple, how can we use matrix operations to compute the covariance matrix of the variables in the data?

Given statement: The rule of thumb for estimating the time of completion is 1.5 times what you originally think it will be.

Given statement is True.

The reason for this rule of thumb is that tasks often take longer than initially estimated due to unforeseen challenges, dependencies, and other factors that can cause delays.

By estimating the time of completion as 1.5 times the original estimate, you are accounting for these potential delays and allowing for a more realistic timeline.

This rule of thumb is not a hard and fast rule, and there will be cases where tasks take less or more time than 1.5 times the original estimate. However, it can be a helpful guideline for project planning and resource allocation, as it helps to ensure that sufficient time and resources are allocated to complete tasks within a realistic timeframe.

For similar question on estimating.

https://brainly.com/question/597381

#SPJ11

The distribution in which variable x has binomial distribution are as follow,

Option A) When the medicine is tried with two patients, X is the number of patients for whom the medicine worked.

Option D) When the medicine is tried with six patients, X is the number of patients for whom the medicine worked.

When the medicine is tried with two patients, X is the number of patients for whom the medicine worked.

This variable X follows a binomial distribution .

Because there are two independent trials two patients.

With a constant probability of success 30%.

And the outcome of one trial doesn't affect the outcome of the other.

When the medicine is tried with six patients, X is the number of patients for whom the medicine does not work.

This variable X does not follow a binomial distribution.

Because the probability of success is not constant it's the complement of 30%, which is 70%.

Also, the outcome of one trial affects the outcome of the other trials.

As there are only six patients .

Number of patients for whom medicine does not work depends on number of patients for whom it worked.

When the medicine is tried with six patients, X is the number of patients for whom the medicine worked.

This variable X follows a binomial distribution.

Because there are six independent trials six patients with a constant probability of success (30%) .

The outcome of one trial doesn't affect the outcome of the other.

When the medicine is tried with two patients, X is the number of doses each patient needs to take.

This variable X does not follow a binomial distribution.

Because it's not a count of successes out of a fixed number of independent trials.

But rather a continuous variable that can take any non-negative value.

Learn more about binomial distribution here

brainly.com/question/12702509

#SPJ4

The above question is incomplete, the complete question is:

For a certain type of hay fever, Medicine H has a 30% probability of working.

In which distributions does the variable X have a binomial distribution?

Select EACH correct answer.

A. When the medicine is tried with two patients, X is the number of patients for whom the medicine worked.

B. When the medicine is tried with six patients, X is the number of patients for whom the medicine does not work.

C. When the medicine is tried with six patients, X is the number of patients for whom the medicine worked.

D. When the medicine is tried with two patients, X is the number of doses each patient needs to take.

The cube roots of 216 written in the rectangular (standard) form are 3 + 3√3, -3+3√3, and 6.

In mathematics, the cube root formula is used to represent any number as its cube root, for example, any number x will have the cube root 3x = x1/3. For instance, 5 is the cube root of 125 as 5 5 5 equals 125.

3√216 = 3√(2x2x2)x(3x3x3)

= 2 x 3 = 6

the prime factors are represented as cubes by grouping them into pairs of three. As a result, the necessary number, which is 216's cube root, is 6.

Therefore, the cube roots of 216 are 3 + 3√3, -3+3√3, and 6.

Learn more about cube root, here:

https://brainly.com/question/31153573

#SPJ1

Answer:

f(x) is the blue graph, g(x) is the red graph.

x^2 - 3x + 17 - (2x^2 - 3x + 1) = 16 - x^2

16 - x^2 = 0 when x = -4, 4

So the area between these two graphs is (using the TI-83 graphing calculator):

fnInt (16 - x^2, x, -4, 4) = 85 1/3

I gotchu <3

Since the vertex is (0, -3), the quadratic function can be written in vertex form as:

f(x) = a(x - 0)^2 - 3

Where 'a' is a constant that determines the shape of the parabola. Since the end behavior of the function is y --> - Infinite as x --> - infinite and y --> - Infinite as x --> + infinite, the leading coefficient 'a' must be negative.

So, f(x) = -a(x^2 - 0x) - 3

Now, using the given point (1, -7) on the parabola, we can substitute the coordinates into the function and solve for 'a'.

-7 = -a(1^2 - 0(1)) - 3

-7 = -a - 3

a = 10

Therefore, the quadratic function that satisfies the given characteristics is:

f(x) = -10x^2 - 3

Hope this helps :)

Answer:  the answer is A. 14.

Step-by-step explanation: In each trial of the reenactment, Scott chooses one card from the stack and records its digit. Based on the given data, a digit of or 1 speaks to a objective scored, and a digit of 2 through 9 speaks to a missed endeavor.

Out of the 5 endeavors per amusement, on the off chance that Scott scores precisely 2 objectives, it implies he missed 3 endeavors. Subsequently, the likelihood of this occasion can be calculated as:

P(exactly 2 objectives) = (0.2)²(0.8)³ = 0.008192

This likelihood can be utilized to discover the anticipated number of diversions in which Scott scores precisely 2 objectives, by duplicating it by the overall number of diversions reenacted:

Anticipated number of recreations = P(exactly 2 objectives) × Add up to number of recreations = 0.008192 × 84 ≈ 0.68

Adjusting to the closest entire number, we get that Scott is anticipated to score precisely 2 objectives in 1 diversion out of the 84 recreated diversions.

The resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

A finite collection of symbols that are properly created in line with context-dependent criteria is referred to as an expression, sometimes known as a mathematical expression.

Expressions in writing are made using mathematical operators such as addition, subtraction, multiplication, and division.

For instance, "4 added to 2" will have the mathematical formula 2+4.

So, we have the expression:

= x² + 10x + 24

Now, solve when x = 3 as follows:

= x² + 10x + 24

= 3² + 10(3) + 24

= 9 + 30 + 24

= 63

Therefore, the resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

Know more about expressions here:

https://brainly.com/question/723406

#SPJ1

Correct question:

Evaluate the expression when x = 3.

x² + 10x + 24

a. 81

b. 86

c. 63

d. 60

The correct statement regarding the null hypothesis is: the null hypothesis claims the opposite of what the researcher believes.

The null hypothesis is the claim that no relationship exists between two sets of data or variables being analyzed. The

null hypothesis is that any experimentally observed difference is due to chance alone, and an underlying causative

relationship does not exist, hence the term "null".

In research, the null hypothesis is a statement of no effect or no relationship between variables, while the alternative

hypothesis represents the effect or relationship the researcher is interested in demonstrating.

The purpose of statistical testing is to determine whether there is enough evidence to reject the null hypothesis in

favor of the alternative hypothesis.

for such more question on null hypothesis

https://brainly.com/question/25263462

#SPJ11

The missing angles of the diagram are:

∠1 = 118°

∠2 = 62°

∠3 = 118°

∠4 = 30°

∠5 = 32°

∠6 = 118°

∠7 = 30°

∠8 = 118°

Supplementary angles are defined as two angles that sum up to 180 degrees. Thus:

∠1 + 62° = 180°

∠1 = 180 - 62

∠1 = 118°

Now, opposite angles are congruent and ∠2 is an opposite angle to 62°. Thus: ∠2 = 62°.

Similarly: ∠3 = 118° because it is congruent to ∠1

Alternate angles are congruent and ∠5 is an alternate angle to 32°. Thus:

∠5 = 32°

Sum of angle 4 and 5 is a corresponding angle to ∠2 . Thus:

∠4 + ∠5 = 62

∠4 + 32 = 62

∠4 = 30°

This is an alternate angle to ∠7 and as such ∠7 = 30°

Sum of angles on a straight line is 180 degrees and as such:

∠8 = 180 - (30 + 32)

∠8 = 118° = ∠6 because they are alternate angles

Read more about Missing Angles at: https://brainly.com/question/28293784

#SPJ1

Number of red counters in the original bag is 3, and the number of green counters is 7.

Let's use algebra to solve the problem. Let U be the number of red counters and G be the number of green counters originally in the bag.

From the first part of the problem, we know that

Probability (selecting a green counter) = G / (U + G) = 3/7

Solving for U in terms of G, we get

U = (7G - 3G) / 3 = 4G/3

So we know that there were 4G/3 red counters and G green counters in the bag originally. But since the number of counters must be a whole number, we can assume that there were 4R red counters and 3G green counters originally, where R and G are both integers and R + G is the total number of counters.

After adding 2 red and 3 green counters, the number of counters in the bag is now R + 2 + G + 3 = R + G + 5.

From the second part of the problem, we know that

P(selecting a green counter) = (G + 3) / (R + G + 5) = 6/13

Solving for R in terms of G, we get

R = (13G - 9G - 15) / 7 = 4G/7 - 15/7

Since R must be an integer, we can try different values of G to see if R is an integer. For example, if G = 7, then R = 3 and the total number of counters is 10.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

The given question is incomplete, the complete question is:

There are only U red counters and G green counters in a bag. A counter is taken at random from the bag. The probability that the counter is green is 3/7. The counter is put back in the bag. 2 more red counters and 3 more green counters are put in the bag. A counter is taken at random from the bag. The probability that the counter is green is 6/13. Find the number of red counters and the number of green counters that were in the bag originally

The percentage of the original area of wetlands currently left in the United States is approximately 50%. So, the correct

option is 50% (option 3).

Percentages are a way of expressing a proportion or a fraction as a part of 100. It is denoted by the symbol "%".

According to the United States Environmental Protection Agency (EPA), it is estimated that about 50% of the original

wetlands in the contiguous United States have been lost since the 1600s due to human activities such as agriculture,

development, and urbanization. Therefore, the correct answer to the question is 50%.

for such more questions on percentages

https://brainly.com/question/24877689

#SPJ11

The percentage of the original area of wetlands currently left in the United States is approximately 50%.

Wetlands are regions of land where the soil is continually or intermittently soaked with water. Wetlands have a particular hydrology, soil, and vegetation mix that results in specialised ecosystems that offer a variety of ecological functions.

There are many different types of habitats where wetlands can be found, such as coastal locations, interior regions, and high-altitude mountain regions. They come in a variety of shapes, such as marshes, swamps, bogs, fens, and estuaries, and can be freshwater, brackish, or saline.

Wetlands are significant for several reasons. For species, such as migrating birds, amphibians, and fish, they offer crucial habitats. They also aid in removing contaminants from water, lessen the effects of flooding, and give people access to recreational activities. Wetlands are crucial for carbon sequestration as well.
Based on the information provided, the question is asking for the approximate percentage of the original area of wetlands currently left in the United States. The answer is approximately 50%.

Learn more about wetlands here:

https://brainly.com/question/30010590

#SPJ11

Answer:

To determine which ratio is proportional to 80:60, we need to simplify the ratio by dividing both terms by their greatest common factor. In this case, the greatest common factor of 80 and 60 is 20, so:

80/20 = 4

60/20 = 3

Therefore, the simplified ratio is 4:3.

Now we can compare this ratio to the given options to see which one is proportional to 4:3:

16:15 is not proportional

16:12 is proportional (since 16/4 = 4 and 12/3 = 4)

18:15 is not proportional

18:12 is proportional (since 18/3 = 6 and 12/2 = 6)

Therefore, the ratio that is proportional to 80:60 is 16:12.

We need approximately 12 servings of Designer Whey and 2 servings of Muscle Milk to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

Let x be the number of servings of Designer Whey and y be the number of servings of Muscle Milk needed to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

From the information given, we know that each serving of Designer Whey provides 20 grams of protein and 3 grams of carbohydrates, and each serving of Muscle Milk provides 16 grams of protein and 9 grams of carbohydrates.

Therefore, we can set up the following system of equations:

20x + 16y = 262

3x + 9y = 54

To solve for x and y, we can use any method of solving a system of equations. For example, we can use substitution:

From the second equation, we can solve for x in terms of y:

x = (54 - 9y)/3 = 18 - 3y

Substituting this into the first equation, we get:

20(18 - 3y) + 16y = 262

Simplifying, we get:

80y = 182

Solving for y, we get:

y = 2.275

Substituting this into the equation x = 18 - 3y, we get:

x = 12.175

To learn more about equations click on,

https://brainly.com/question/29118974

#SPJ4

Since they can't rent for a fraction of a day, the maximum number of days they can rent the small car with insurance is 10 days.

The total cost of renting a small car with insurance is:

$465 = $25x + $21x

Simplifying and solving for x, we get:

$465 = $46x

x = 10.11

Since they can't rent for a fraction of a day, the maximum number of days they can rent the small car with insurance is 10 days.

Learn more about insurance below.

https://brainly.com/question/25221455

#SPJ1

For a percentage data of students who play the different game and win the prize, the expected amount to pay for prizes for that booth by the carnival committee is equals to the $218.70.

We have a booth of school carnival in past years, The percentage of students win a stuffed toy = 22%

The percentage of students win a jump rope = 16%

The percentage of students win a t-shirt

= 6%

The winning amount for stuffed toy game = $ 3.60

The winning amount for jump rope game = $1.20

The winning amount for t-shirt game

= $7.90

The remaining students do not win a prize. Now, total number of students play the game at the booth = 150

So, number of students who win stuffed toy = 22% of 150 = 33

Number of students who win jump rope = 16% of 150 = 24

Number of students who win stuffed toy

= 6% of 150 = 9

For determining the expected pay using the simple multiplication formula. Total expected pay for prizes for that booth is equals to the sum of resultant of multiplcation of number of students who play a particular game into pay amount for that game. That is total excepted pay in dollars = 3.60 × 33 + 1.20 × 24 +7.90 × 6

= 218.7

Hence required value is $218.70.

For more information about percentage, visit:

https://brainly.com/question/843074

#SPJ4

Step-by-step explanation:

rotate the triangle in your mind (or as actual picture on your phone or computer), so that the right angle is the bottom right or bottom left, and C being the opposite bottom angle.

then we see

28 = cos(C) × 35

21 = sin(C) × 35

and so,

sin(C) = 21/35 = 3/5

cos(C) = 28/35 = 4/5

tan(C) = sin(C)/cos(C) = 3/5 / 4/5 = 3/4

The coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.

The circumference of the coin can be calculated as follows to determine the number of turns it makes:

C = πd

where C is the circumference, d is the diameter, and π is the mathematical constant pi (approximately equal to 3.14159).

So, for the given $2 coin with a diameter of 25.75 mm, the circumference is:

C = πd = 3.14159 x 25.75 mm ≈ 80.926 mm

Divide the distance traveled by the coin's circumference to determine the number of turns it makes when rolled on its edge for 1.34 meter:

Number of turns = distance traveled / circumference of the coin

Number of turns = 1.34 m / 0.080926 m

Number of turns ≈ 16.53

Therefore, the coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.

know more about circumference visit :

https://brainly.com/question/28757341

#SPJ1