They try not to influence the subjects
Explanation:
Riding your skateboard, it takes 12 seconds to speed up from 2 m/s to 8 m/s. Find the acceleration.
PLZ HELP DUE IN 5MINUTES
Answer:
Nitrogen is de solvent while others are the solute
What are the causes of season change in the earth
Answer:
the causes of season change on the earth is due to the tilted axis
Kinetic and potential energy are forms of what kind of energy?
gravitational
chemical
electrical
mechanical
Answer:
mechanical energy
Explanation:
The key difference that exists between kinetic energy and potential energy lies in the fact that, potential energy is that form of mechanical energy which is stored within an object, ready to be released as and when needed to do some work, while, kinetic energy is that form of mechanical energy that has been released and is associated with the body in motion.
A boat moving at a constant speed travels 15 meters in 8 seconds. How far does it travel
in 40 seconds?
0 75 meters
53 meters
335 meters
0 480 meters
Answer:
75m
Explanation:
Given parameters:
Distance covered by the boat = 15m
Time taken = 8s
Unknown:
Distance covered by the boat in 40s = ?
Solution:
To solve this problem, we need to find the speed of the boat first;
Speed = [tex]\frac{distance}{time}[/tex]
Insert the parameters and solve;
Speed =[tex]\frac{15}{8}[/tex] m/s
Now;
The boat will travel;
Distance = speed x time
Distance = [tex]\frac{15}{8}[/tex] x 40 = 75m
An object is thrown horizontally off of a cliff. While falling, what happens to the horizontal acceleration?
It first decreases and then increases
O It decreases
O It increases
O It stays at zero
O It stays at a constant, non-zero, value
There is no acceleration in the horizontal direction because the speed in that direction is constant. So it stays at zero.
What does the color of a star indicate
Answer:
Its temperature
Explanation:
Answer:
The stars age
Explanation:
As stars age, they run out of hydrogen to burn, decreasing the amount of energy they give off. So the younger stars can look bluer while older ones look more red.
Hope this helps :3
Consider a double Atwood machine constructed as follows: A mass 4m is suspended from a string that passes over a massless pulley on frictionless bearings. The other end of this string supports a second similar pulley, over which passes a second string supporting a mass of 3m at one end and m at the other. Using two suitable generalized coordinates, set up the Lagrangian and use the Lagrange equations to find the acceleration of the mass 4m when the system is released. Explain why the top pulley rotates even though it carries equal weights on each side.
At which point(s) does the ball have 25% potential energy and 75% kinetic energy?*
Answer:
hey
Explanation:
hey
name six kinds of simple machines.
Answer:
the wheel and axle, the lever, the inclined plane, the pulley, the screw, and the wedge
Explanation:
Answer the following:
You are going to race your friend to a tree near the back of the playground. The tree is 24 meters away from where you stand. It will take you 4 seconds to reach the tree. What will your average speed be?
Answer:
1. 6 m/s.
2. 320 miles.
Explanation:
1. Determination of the average speed.
Total distance travelled (D) = 24 m
Total time (t) = 4 s
Average speed =.?
Average speed is simply defined:
Average speed = Total distance /total time
Average speed = 24/4
Average speed = 6 m/s
2. Determination of the distance travelled by the train.
Speed = 40 mph
Time = 8 h
Distance =?
Speed is simply defined as:
Speed = Distance /time
40 = Distance / 8
Cross multiply
Distance = 40 × 8
Distance = 320 miles
Therefore, the train travels a distance of 320 miles.
True or False: The definition of flexibility is the ability of a joint or a series of joints to move through an unrestricted, pain-free range of motion.
Answer:
true
Explanation:
hope I helped a bit
plz answer this very soon
Answer:
Im gonna say it is answer A:) Hope this helps!
Explanation:
PLEASE HELP!!!
If the potential difference across a 30.0-ohm resistor is 10.0 volts, what is the current through the resistor?
A 2 row table with 7 columns. The first row is labeled Component with entries A Subscript x Baseline, A Subscript y Baseline, B Subscript x Baseline, B Subscript y Baseline, C Subscript x Baseline, C Subscript y Baseline. The second row is labeled Magnitude in kilometers with entries 1.6, 2.8, 3.9, 6.4, 1.2, 0.7. Three vectors are drawn on the x y plane. Vector A is drawn southwest, vector B northeast, and vector C southeast.
The image shows the displacement of a motorboat. The data table shows the magnitudes of the components of each displacement vector.
What is the value of Rx?
km
What is the value of Ry?
km
Answer:
rx=3.5 ry=2.9
Explanation:
i did it and i got them right
Answer:
Rx: 3.5km
Ry: 2.9km
Explanation:
A trebuchet at ground levels throws a boulder with an initial velocity of 25 m/s at 30 degrees.
What was the magnitude of the final velocity of the boulder before it hit the ground?
a
30 m/s
b
10 m/s
C С
25 m/s
ОООООО
d
20 m/s
e
27.5 m/s
12.5 m/s
Answer:
The correct option is;
C. 25 m/s
Explanation:
The initial velocity with which the boulder was thrown = 25 m/s
The path in which the boulder projectile moves = 30°
For projectile motion, we have;
The time it takes the boulder to hit the ground is given by the following equation;
y = y₀ + v₀·sin(θ₀)t -¹/₂·g·t²
Where;
y = The height of the boulder
y₀ = The initial height of the boulder = 0
g = The acceleration due to gravity = 9.81 m/s²
When the boulder touches the ground again, the value of y = 0. therefore, we have;
0 = 0 + 25 × sin(30)t -¹/₂ × 9.81 × t²= 12.5·t - 4.905·t²
From which we have, t = 0 or t ≈ 2.55 s
At t = 2.55 s The vertical velocity = v₀sin(θ₀) - g·t = 25 × 0.5 - 9.81×2.55 = -12.5 m/s
The vertical velocity, [tex]v_y[/tex] = -12.5 m/s
The horizontal velocity, vₓ = v₀·cos(θ₀) = 25×cos(30) ≈ 21.65 m/s
The magnitude of the resultant velocity before, the boulder hits the ground is given as follows
[tex]\left | v \right |[/tex] = √((vₓ)² + ([tex]v_y[/tex])²) = √(12.5² + 21.65²) = √625 = 25
The magnitude of the resultant velocity before, the boulder hits the ground is 25 m/c
What is the method of charging called?
The weight of a box is having a mass of 100 kg is ___n
Answer: the weight of the box is 980N
Explanation:
The weight an object has is defined as the force of gravity acting on that object which is given as
w =m x g
Since weight is defined as a force, it can also be written as
w=mg
= F= mg
where m= mass of the object in kg given as 100Kg
an g is the gravitational acceleration in m/s^2 = g is 9.8 m/s2
F= mg
F = 100 kg x 9.8 m/s2
F== 980Kgm/s^2 = 980N
Therefore the weight of the box is 980N
two same size anvils are dropped from different heights. Assume both anvils are made of the same material (iron) and there is no air resistance. Which anvil has the greatest acceleration during the fall?
Everything falls at the same rate.
Which of the following statements best describes why the mass of a bowling ball would not change if it were transported from Earth to the Moon?
Gravity is a constant force
The bowling ball wil adapt to the changes in gravity
Matter is resistant to acceleration and changes in gravity
The amount of matter in the bowling all remains the same
Answer:
D hope this helps
Explanation:
Answer:
D
Explanation:
The amount of matter in the bowling ball remains the same.
i’m stuck on this problem, help is very appreciated!!
Explanation:
Use the equation F=m×a
F= 1500 N
M= 500kg
a= F/M
a= 1500÷ 500
a= 3m/s^2
Answer:
Explanation:
Force, f = 1500 N
Mass, m = 500 kg
Acceleration, a = ?
f = ma
a = f/m
= 1500 / 500 = 3m/s^2
Hope this helps
plz mark as brainliest!!!!!
A car on flat ground accelerates at 0.785 m/s2 when a net force of 1050 N acts on it. How much normal force acts on it?
Answer:
13108.3N
Explanation:
Given parameters:
Acceleration = 0.785m/s²
Net force = 1050N
Unknown:
Normal force acting on car = ?
Solution:
The normal force on this car is the weight of the car;
Normal force = mg
where m is the mass of the car
g is the acceleration due to gravity = 9.8m/s²
Now solve for the mass;
Net force = mass x acceleration
1050 = mass x 0.785
mass = [tex]\frac{1050}{0.785}[/tex] = 1337.6kg
So,
Normal force = 1337.6kg x 9.8m/s² = 13108.3N
13108 works as well for acellus
why it's dangerous to jump from a moving bus?
Answer:
A man jumping out from a moving bus holds the inertia of motion.As the man lands on the ground,feet came to rest instantly while the upper due to inertia of motion.Therefore the person may fall under bus.
1. In general
, which type of compound tends to have the lowest melting point?
O A. Molecular solids
O B. Network solids
O C. lonic salts
O D. Metals
Joe went to see his Grandmother. He promised his Grandma that he would arrive at her house at 5 pm. He leaves his house at 3:00 and this will allow him 2 hours to get to her house. Joe will need to travel 70 miles to get to her house. How fast will Joe need to drive to make it to Grandma's house on time?
Answer:
35 mph
Explanation:
From the question given above, the following data were obtained:
Time (t) = 2 hours
Distance (d) = 70 miles
Speed (S) =.?
Speed is simply defined as the distance travelled per unit time. Mathematically, it is expressed as:
Speed (S) = Distance (d) / Time (t)
S = d/t
With the above formula, we can calculate how fast (i.e the speed) Joe will need to drive to make it to his Grandma's house on time. This can be obtained as follow:
Time (t) = 2 hours
Distance (d) = 70 miles
Speed (S) =.?
S = d/t
S = 70/2
S = 35 mph
Therefore, Joe will drive at 35 mph in order to get to his Grandma's house on time.
A van moves 100 km in 2 1/2 hours.
What is its average speed in kilometers
per hour?
Answer:
0.40km/h
I think.. Hope this helps <3
can the answer to density be simplified
Answer: yes because all densities can be simplifed it just depends on the number.
PLEASE HELP! HURRY. ALMOST OUT OF TIME
Answer:
balanced hurry up fam
gurry hurry hurry
ILL GIVE BRAINLY THING
Tom has been hired to deliver 11 m3 of sand. If the truck that Tom is driving has a truck bed that is 2.5 m X 1.6 m, X 0.75 m how many trips will Tom need to complete the order?
PLS GO TO MY PROFILE TO SEE THE OTHER QUESTIONS I POSTED I GIVE BRAINLY THING FOR THOSE AS WELL THANK YOU
Answer:
About 3 trips
Explanation: if we do 2.5m*1.6m*0.75 it equals to 11000 then we divide that to 11m3 and it gives you 3.6 so it will be about 3 times
Thx
(02.04 LC) Which statement best describes the rate of dissolving? (2 points) Group of answer choices All substances dissolve at the same rate. All substances dissolve at a fast rate. The rate of dissolving may be fast or slow. Rates of dissolving are usually slow.
Answer:
C. The rate of dissolving may be fast or slow.
Explanation:
When a solute is added to a solvent, the rate of dissolving may be fast or slow. This is determined by the temperature of the solvent.
A high temperature of solvent can cause an increase in the rate of dissolving a solute or substance in it, while a low temperature of solvent causes a decrease in the rate of dissolving a solute or substance in a solvent.
Therefore, the rate of dissolving may be fast or slow.