Answer:
The correct answer is - sudden static charge could damage sensitive medical equipment.
Explanation:
Staff members of a hospital or medical institution wear special shoes that are able to prevent static charge as they walk. These shoes help to prevent static charge as we know that the sudden transfer of a static charge to medical equipment may alter the reports or damage sensitive equipment. This type of static charge is negative or positive due to electronic devices touches the device leads to damage of electric devices.
Thus, the correct answer is - sudden static charge could damage sensitive medical equipment.
Please help me on this question
The volume of a gas is 2250 mL at 290 kPa what will the volume be when the pressure is reduced to .9 atm
Answer:
7178.22 mL
Explanation:
Applying,
PV = P'V'................. Equation 1
Where P = Initial pressureof gas, V = Initial volume of gas, P' = Final pressure of gas, V' = Final volume of gas.
make V' the subject of the equation
V' = PV/P'.............. Equation 2
From the question,
Given: V = 2250 mL, P = 290 kPa, P' = 0.9 atm = (101×0.9) = 90.9 kPa
Substitute these values into equation 2
V' = (2250×290)/90.9
V' = 7178.22 mL
17. A scientist determines an unknown metallic sample to have 77 protons and 77 electrons with a mass number of 192. How many neutrons does one
metal atom contain?
Answer:
Ok so hot u hahaha
Explanation:
Hshshhdhdi jsushshshshshhdhdhd hshshshshsh hdhdhdhd hdhdhdhd hdhdh
If 10.0 grams of sodium phosphate are reacted, what mass of barium nitrate is
required?
Answer: The mass of barium nitrate required is 23.91 g
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of sodium phosphate = 10.0 g
Molar mass of sodium phosphate = 163.94 g/mol
Plugging values in equation 1:
[tex]\text{Moles of sodium phosphate}=\frac{10.0g}{163.94g/mol}=0.061 mol[/tex]
The chemical equation for the reaction of sodium phosphate and barium nitrate follows:
[tex]3Ba(NO_3)_2+2Na_3PO_4\rightarrow Ba_3(PO_4)_2+6NaNO_3[/tex]
By the stoichiometry of the reaction:
If 2 moles of sodium phosphate reacts with 3 moles of barium nitrate
So, 0.061 moles of sodium phosphate will react with = [tex]\frac{3}{2}\times 0.061=0.0915mol[/tex] of barium nitrate
Molar mass of barium nitrate = 261.337 g/mol
Plugging values in equation 1:
[tex]\text{Mass of barium nitrate}=(0.0915mol\times 261.337g/mol)=23.91g[/tex]
Hence, the mass of barium nitrate required is 23.91 g
How many liters of F2 do you have if you are given 100 grams of F2?
ZnSO4 +
+
LINO, → ---- Zn(NO3)2
+
Li,SO4
Balanced equation
Answer:
ZnSO4 + 2LiNO3 → Zn(NO3)2 + Li2SO4
Explanation:
There's many resources on web that can assist you with this concept:
https://en.intl.chemicalaid.com/tools/equationbalancer.php
https://www.webqc.org/balance.php
What is the mass of oxygen in 1 mole of NaHCO3?
Answer:
48.00
Explanation:
3 oxygen (15.99 x 3)= 48
Which of the following best describes asexual reproduction?
it produces offspring with a large amount of genetic variation
it occurs in simple organisms, such as bacteria, but not in multicellular organism such as plants and animals
it allows species to quickly adapt to environmental changes
it can be an advantage to organisms that live in a stable unchanging environment
Answer:
First Choice
it produces offspring with a large amount of genetic variation
Answer: i think this is correct.
Explanation: it occurs in simple organisms, such as bacteria, but not in multicellular organism such as plants and animals
Any change in average weather conditions on Earth that lasts for at least several decades is called
Answer:climate change
Explanation:
Someone please help me
Answer:reflection
Explanation:
ASAP:
The estimated atomic mass of silicon could be Choose... amu because the Choose.. abundant isotope is Choose...
Answer:
The estimated atomic of silicon is 28.082 a.m.u.
Explanation:
The estimated atomic mass of silicon ([tex]M_{Si, est}[/tex]), in a.m.u., is equal to the weighted average of atomic masses of silicon available in nature and in terms of their abundances:
[tex]M_{Si, est} = r_{1}\cdot M_{Si-28} + r_{2} \cdot M_{Si-29} + r_{3}\cdot M_{Si-30}[/tex] (1)
Where:
[tex]r_{1}[/tex], [tex]r_{2}[/tex], [tex]r_{3}[/tex] - Relative abundance of each isotope, no unit.
[tex]M_{Si-28}[/tex], [tex]M_{Si-29}[/tex], [tex]M_{Si-30}[/tex] - Atomic mass of each isotope, in a.m.u.
If we know that [tex]M_{Si-28} = 27.976\,a.m.u.[/tex], [tex]M_{Si-29} = 28.976\,a.m.u.[/tex], [tex]M_{Si-30} = 29.974\,a.m.u.[/tex], [tex]r_{1} = \frac{92.22}{100}[/tex], [tex]r_{2} = \frac{4.68}{100}[/tex] and [tex]r_{3} = \frac{3.09}{100}[/tex], then the estimated atomic mass of silicon is:
[tex]M_{Si, est} = r_{1}\cdot M_{Si-28} + r_{2} \cdot M_{Si-29} + r_{3}\cdot M_{Si-30}[/tex]
[tex]M_{Si,est} = \left(\frac{92.22}{100} \right)\cdot (27.976\,a.m.u.) + \left(\frac{4.68}{100} \right)\cdot (28.976\,a.m.u.) + \left(\frac{3.09}{100} \right)\cdot (29.974\,a.m.u.)[/tex]
[tex]M_{Si, est} = 28.082\,a.m.u.[/tex]
The estimated atomic of silicon is 28.082 a.m.u.
If the last carbon atom of an unsaturated fatty acid is bonded to two hydrogen atoms and one carbon atom, what type of bond must exist between the last carbon and the other carbon atom
Answer:
Double bond
Explanation:
Carbon is a tetravalent atom. This implies that the carbon atom always forms four covalent bonds.
These four covalent bonds may be single, double or triple bonds. Compounds that contain double and triple bonds are said to be "unsaturated".
If the last carbon atom of an unsaturated fatty acid is bonded to two hydrogen atoms and one carbon atom, it means that the bond between the last carbon and the other carbon atom must be a double bond because carbon must be tetravalent and we have already been told that the fatty acid is unsaturated.
The last carbon atom of the unsaturated fatty acid must form two covalent bonds to the other carbon atom in order to respect the tetravalency of carbon.
Answer:
Double bond
Explanation:
its in the book
When temperature drops, (for example from 20 degrees celsius to 10 degrees celsius)
a.) energy increases
b.) particles move slower
c.) particles collide more often
d.) pressure increases
Answer:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Explanation:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Please help with this , thanks you guys very much
Answer:
I am giving u some explanation related this question pls see that
it may help u
Explanation:
The pH scale measures how acidic an object is. Objects that are not very acidic are called basic. The scale has values ranging from zero (the most acidic) to 14 (the most basic). As you can see from the pH scale above, pure water has a pH value of 7. This value is considered neutral—neither acidic or basic. Normal, clean rain has a pH value of between 5.0 and 5.5, which is slightly acidic. However, when rain combines with sulfur dioxide or nitrogen oxides—produced from power plants and automobiles—the rain becomes much more acidic. Typical acid rain has a pH value of 4.0. A decrease in pH values from 5.0 to 4.0 means that the acidity is 10 times greater.
How pH is Measured
There are many high-tech devices that are used to measure pH in laboratories. One easy way that you can measure pH is with a strip of litmus paper. When you touch a strip of litmus paper to something, the paper changes color depending on whether the substance is acidic or basic. If the paper turns red, the substance is acidic, and if it turns blue, the substance is basic
Identify the correct formula for each of the following acids. Click here to use the common polyatomic ion sheet if needed.
Hydrochloric acid
HClO2
HClO3
HCl
Answer:
HCl
H3PO4
Explanation:
The formula of hydrochloric acid is HCl. It contains one hydrogen and one chlorine atom. And thus all other options with O is wrong and option C is correct.
What is hydrochloric acid?
Hydrochloric acid is a strong acid having the formula HCl. Thus one mole of hydrochloric acid contains one hydrogen atom and one chlorine atom. No other elements such as oxygen is present in it.
The electronegativity of chlorine is very higher compared to hydrogen and they attracts by hydrogen bond. Each atom shares one electron with the other atom and thus it can also said as they are covalently bonded.
Hydrochloric acid is used in many industrial uses and it is present even in our stomach to aid digestion. Since it is very strong acid it may cause sever damages to skin if and its vapor causes respiratory issues when comes in contact.
Therefore, the correct formula of hydrochloric acid is HCl, option C is correct.
To find more about HCl, refer the link below:
https://brainly.com/question/24177034
#SPJ5
If 250. ML of water are poured into the measuring cup, the volume reading is 8.45 oz . This indicates that 250. ML and 8.45 oz are equivalent. How many milliliters are in a fluid ounce based on this data?
Answer:
[tex]1oz=29.589ml[/tex]
Explanation:
From the question we are told that:
Initial Volume [tex]v_1=250ml[/tex]
Final Volume [tex]v_2=8.45oz[/tex]
Generally the equation for one ounce is mathematically given by
[tex]1oz=\frac{v_1}{v_2}[/tex]
Therefore
[tex]1oz=\frac{250}{8.45}[/tex]
[tex]1oz=29.589ml[/tex]
CI2+NaOH⇒NaCI+NaOCI+H20
is there a way to balance this?
Explain the reason that the atomic emission spectrum of hydrogen contains only four lines.
A)
The hydrogen atoms form a continuous series of quantized energy levels
that transmute at a variety of frequencies.
B)
Hydrogen atoms contain a limited number of quantized energy levels that
emit radiation at a limited number of frequencies.
C)
Many hydrogen atoms accomodate an array of quantized energy levels that
can release energy at a progression of frequencies.
A hydrogen atom consists of a sequence of quantized energy levels that
incorporate radiation only from consecutive frequencies.
D)
Answer:
Though a hydrogen atom has only one electron, it contains a large number of shells, so when this single electron jumps from one shell to another, a photon is emitted, and the energy difference of the shells causes different wavelengths to be released... hence, mono-electronic hydrogen has many spectral lines.
Explanation:
thank me later
The reason that the atomic emission spectrum of hydrogen contains only four lines is the hydrogen atoms form a continuous series of quantized energy levels that transmute at a variety of frequencies.
What is atomic emission spectrum of hydrogen?The emission spectrum of hydrogen consist of numerous spectral series, the wavelength is postulated by Rydberg formula.
The reason behind the lines of spectrum is the transition of electron between two energies.
Thus, the correct option is A.
Learn more about atomic emission
https://brainly.com/question/11289486
#SPJ2
why are vials made from vapor glass stronger then typical vials?
I.they contain aluminum instead of boron.
II. They submerged in hot salt bath.
III. They formed out of long glass tubes.
A) I
B) I and II
C) I and III
D) I, II, and III
Answer:
2
Explanation:
I'm not that sure plz tell me if this is right
Organize the following list of atoms from highest to lowest Atomic Radius:
Sulfur, Aluminum, Sodium, Chlorine, Argon, Silicon
which is following is used to cook food?
Answer: A process of cooking food in a pot made from unglazed and natural clay. coddling: Heating food in water kept just below the boiling point.
Explanation:
why metal in the middle of metal activity series can't be obtained by heating ors in air please help me I will give u branist.follow u back and give u like plz help me with a good answer
[tex]\huge\mathsf{\red{\underline{\underline{Answer}}}}[/tex]
[tex]{\green{\dashrightarrow}}[/tex]Metals such as iron, zinc, lead, copper, etc., are in the middle of the reactivity series. These are moderately reactive metals and are usually present as sulphides or carbonates. A metal is obtained from its ore by the processes of reduction or by electrolysis.
Pls answer this Il give brainiest question in picture ty
Answer:
c
Explanation:
troposphere is the answer
is there a way u could see if the element is acid,base or salt in the periodic table?
Answer:
OK i see
Explanation:
A student investigates the reaction between sodium hydroxide solution and dilute sulfuric acid.
He does a titration to find the concentration of the sulfuric acid.
(a) Give the colour change of the methyl orange indicator at the end-point.
Explanation:
the colour change will be from orange to pink
The color change of the methyl orange indicator at the end-point will show orange to pink.
What is indicator?In an acidic or basic medium, an indicator is just a material that changes color. Indicators are termed indicators because they show one color in an acidic media and different colors in a basic medium. Indicators come in a variety of shapes and sizes: Natural indicators are indicators acquired from natural sources.
It is a just a acid base reaction in which methyl orange acts as a indicator.
In this reaction, when sodium hydroxide solution and dilute sulfuric acid are reacts with each other then after using( indicator)methyl orange the color will be change form orange to pink which indicates the nature of solution will be acidic.
To know more about indicator.
https://brainly.com/question/12489874.
#SPJ2
A Starting substance in a chemical reaction is called a _______________.
1. reactant
2. product
3. chemical reaction
4. physical reaction
Answer:
1.)REACTANT
These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.Most of the electricity that is used in everyday life comes from________ current.
Fill in the blank
Answer:
electric is your answer :)
Explanation:
Edge STEM instruction/assignment perhaps???
Answer:
A. C (alternate current)
PLEASE HELP
Which chemical reaction supports the Law of Conservation of Mass?
Answer:A
Explanation:
When 1 mol of methane is burned at constant pressure, −890 kJ/mol of energy is released as heat. If a 1.67 g sample of methane is burned at constant pressure, what will be the value of ∆H
Answer:
[tex]\Delta H=-92.7kJ[/tex]
Explanation:
Hello there!
In this case, according to the given information, we can infer that 890 kJ of energy are released when 1 mole of methane is burned; however, to find the total heat when 1.67 grams are burned, we first need to calculate the moles in this mass of methane:
[tex]1.67gCH_4*\frac{1molCH_4}{16.04gCH_4}=0.104molCH_4[/tex]
And thus, for calculating the resulting ∆H, we proceed as follows:
[tex]\Delta H=-890kJ/mol*0.104mol\\\\\Delta H=-92.7kJ[/tex]
Regards!
10. A community currently uses coal to produce electricity. What would be an
advantage of using nuclear energy instead? *
a. Uranium is safer than coal
b. Nuclear energy produces no waste
c. Uranium deposits are more abundant than coal
d. Nuclear energy does not produce greenhouse gases
Answer:
c
Explanation:
I'm pretty sure it's C. If it is not then it might be d