in order to grow reproduce, what do you think yeast needs?

If the total volume is 85ml, then the mass of the solid is 59.15g.

Given:

Total volume = 85ml

Liquid solvent mass = 44.3g

Liquid solvent density = 0.865g/ml

Density of solid = 1.75 g/ml

Density = Mas / Volume

   0.865 = 44.3 / Volume

Volume = 44.3 / 0.865

Volume =  51.2

Volume of solid = 85 - 51.2

                        = 33.8

Density = Mass / Volume

     1.75 = Mass / 33.8

   Mass = 59.15

What is mass?

A physical body's mass is the total amount of matter it contains. Inertia, or the body's resistance to acceleration when a net force is applied, is another property that may be measured. The gravitational pull of an object to other bodies is also influenced by its mass. The kilogram serves as the primary mass unit in the SI.

To learn more about Mass click the givenl ink

https://brainly.com/question/3187640

#SPJ4

Numerous enzymes that can break down proteins, amino acids, nucleic acids, and carbohydrates are found in lysosomes.

What is lysosomes?

A membrane-bound organelle called a lysosome is present in many mammalian cells. They are spherical vesicles that can degrade a wide range of biomolecules thanks to hydrolytic enzymes they carry. The proteins that make up a lysosome's membrane and lumen have a distinct makeup. The pH of the lumen, which is between 4.5 and 5.0, is ideal for the hydrolysis-related enzymes, similar to how the stomach functions.

In addition to degrading polymers, the lysosome is also involved in secretion, plasma membrane repair, apoptosis, cell signaling, and energy metabolism in cells.

To learn more about lysosomes click the given link

https://brainly.com/question/5534167

#SPJ4

Maximum Kinetic energy is 10.2

A photoelectron's maximum kinetic energy at a particular frequency. = ℎ − , m an x, where h is that the Planck constant, f is that the frequency of the incoming photon, and W is that the work function of the metal surface, gives the maximal K.E. of a photo electron.

Measurements are made of the cross section for the elastic scattering of electrons with energies lower than 10.2 eV by free hydrogen atoms. A dc beam crossed an atomic hydrogen beam that was chopped at a low frequency in an experiment that was similar to Bederson's in that a signal was produced from the electrons dispersed by the particles in the neutral beam.

The signal from the electrons that were dispersed by the beam appeared at the modulation frequency and at a predetermined phase, with their identification.

The ratio of the hydrogen atom's and therefore the molecule's cross sections was directly measured, and absolute values for the atomic cross section were calculated using absolutely the molecular cross-section.The experimental findings support the thought .

Electron energy within the ground state is 0.13.6

Second energy level: 3.4; overall energy state difference: 10.2

Thus, K.E. equals 10.2.Therefore, we are aware that some electron K.E. was transmitted to the hydrogen atom during an elastic collision.

To learn more about maximum kinetic energy  :

brainly.com/question/25959744

#SPJ4

Average rate =   - d reactant/d time + d product/d time

negative sign indicates that decrease in concentration of reactant and positive sign shows the increment in concentration of product

d represents the change in concentration,  t represents time

Considering the reaction

2H3PO4→P2O5+3H2O

rate =  d ( p^2o^5)/ d t

     =  (p^2o^5) 40 sec -  (p^2o^5) 10 sec / 30  

  =  7.0 * 10^-3- 1.10 * 10^-3/30

  rate = 2 * 10^-4m/s

2H3PO4→P2O5+3H2O

rate = - d H3PO4/2t  = d ( p^2o^5)/ d t

d H3PO4/t = 2 *  d ( p^2o^5)/ d t

          = 2 * 2 * 10^-4

         = 4 * 10^4 m/s

To know more about  concentration   visit : https://brainly.com/question/10725862

#SPJ4

Answer:

Volume = 24.9 cm³

Explanation:

To calculate the volume of the piece of aluminum given its mass and density, we can use the following formula:

[tex]\boxed{{\mathrm{Volume = \frac{Mass}{Density}}}}[/tex].

We are told that the piece of aluminum has a mass of 67.3 grams and that aluminum has a density of 2.70g/cm³. Using this information and the formula above, we can calculate the volume of the piece of aluminum:

Volume = [tex]\mathrm{\frac{67.3 \ g}{2.70 \ g/cm^3}}[/tex]

             = 24.9 cm³

Therefore the volume of the piece of aluminum is 24.9 cm³.

Answer:

6.156099 × 10^12

Answer:

it keeps the heat in and the bugs and flys out

Explanation:

The correct answer is [b] calcium is the metal that is produced by electrolysis of its molten chloride salt.

Metals are the opaque, lustrous elements that are good conductors of heat and electricity. Most metals are malleable and ductile and are, in general, denser than other elemental substances

Any of various opaque, fusible, ductile, and typically lustrous substances that are the good conductors of electricity and heat, form cations by loss of electrons, and yield basic oxides and hydroxides especially :the one that is a chemical element as distinguished from an alloy.

A metal may be a chemical element such as iron; an alloy such as stainless steel; or molecular compound such as polymeric sulfur nitride.

In physics, a metal is generally regarded as any substance capable of conducting the electricity at a temperature of absolute zero. Many elements and compounds that are not normally classified as metals become metallic under the high pressures.

To know more about metals visit: brainly.com/question/18153051

#SPJ4

The molecular equation representing aqueous nitric acid and aqueous ammonia reacting is :

                      NH₃(aq) + HNO₃(aq) → NH₄⁺(aq) + NO₃⁻(aq)

                      NH₃(aq) + HNO₃(aq) → NH₄NO₃(aq)

An acid-base reaction is not the exchange of a hydrogen atom H. It is the exchange of a hydrogen ion (or proton) H⁺.

This reaction combines two ions produced into a single compound. In aqueous solution, the products should be NH⁴⁺ and NO³⁻, since ammonium nitrate is freely soluble in water. Thus, this reaction would be reasonable if reaction does not occur in aqueous solution.

So, the net ionic equation is,

                       NH₃(aq) + HNO₃(aq) → NH₄⁺(aq) + NO₃⁻(aq)

To learn more about molecular reactions and equations,

https://brainly.com/question/1406854

#SPJ4

Answer:nope its right

Explanation:

Answer: b=3-2c-a

Explanation:

a+b+2c=3

a-a+b+2c=3-a

b+2c=3-a

b+2c-2c=3-2c-a

b=3-2c-a

Answer:

7

Explanation:

yeah you just need to add 2 grams of potassium to 5 grams of oxygen

To solve this question we must know the concept of stoichiometry. Thus, 2.355ggrams of K₂O can be produced from 2 grams of K and 5 grams of O₂. option c is correct option

Stoichiometry is a part of chemistry that help us in making relationship between reactant and product from quantitative aspects.

The balanced equation is

4 K + O₂ → 2 K₂O

From stoichiometry we can draw the following information

K: 4 moles

O₂: 1 mole

K₂O: 2 moles

The molar mass of the compounds is:

K: 39.1 g/mole

O₂: 32 g/mole

K₂O: 94.2 g/mole

The mole of respective molecule is

K: 2g÷39.1 g/mole= 0.05mole

O₂: 5g ÷32 g/mole= 0.15mole

K will be the limiting reagent.

4 mole of K produces= 2 mole of K₂O

1 mole of K produces=1/2 mole of  K₂O

0.05 mole of K produces = (1/2)×0.05

                                          = 0.025mole

mass of  K₂O=  94.2 g/mole×0.025mole =2.355g

Thus, 2.355ggrams of K₂O can be produced from 2 grams of K and 5 grams of O₂. option c is correct option

To learn more about the stoichiometry:

https://brainly.com/question/28780091

#SPJ5

For lewis structure of HCO₃⁻ it has 24 valence electron and for SO₃²⁻ has 26 valence electron

A lewis Structure is a very simplified representation of the valence shell electrons in a molecule

Here given compound is  HCO₃⁻ called as bicarbonate we have to draw the lewis structure of SO₃²⁻  first we have to calculate total valence electron and in that compound H=1 valence electron for C=6 valence electron and for oxygen 18 valence electron

Here, C less electronegative so  4×2=8electon are used means 24-8=16elctron

To complete octet of every element 18 electron are required one more covalent bond to be made so the structure are at one oxygen double bond are seen

In that lewis structure HCO₃⁻ of 7 lone pair=7×2=14 e and 5 covalent bond=5×2=10e total valence electron are 24

For SO₃²⁻  called suphite ion in this compound total 26 valence electron are seen 6+3(6)+2 = 6+18+2= 26 valence electron

Here in that structure sulphur has charge +1 because it has 6 valence electron out of which two are non bonding and 6 are bonding and in oxygen has -1 charge because 6 valence electron in nonbonding and 2 are in bonding

+1 on sulphur and -1 are on oxygen

That's why the lewis structure of  HCO₃⁻  and SO₃²⁻ are

Know more about lewis structure

https://brainly.com/question/28535445

#SPJ4

The physical and chemical properties of the dental braces would be listed and explained below.

Dental braces are the dental devices or tools that are used for correction of abnormally developed tooth.

Wearing of dental braces can help to permanently straighten the teeth.

The physical properties of dental braces include the following:

The chemical properties of dental braces is that they are chemically inert leading to its ability to avoid any reaction with the wet (as well as low and high pH) environment of the mouth.

Learn more about dental braces here:

https://brainly.com/question/28348626

#SPJ1

1) Chemical change

2) Physical change

3) Chemical change

4) Physical change

A chemical change occurs when a new substance is formed. There is a rearrangement of atoms of the substance as the new substance is formed. We know that the indicators that a chemical change has occurred are the changes in the temperature, color and appearance of sound sometimes.

On the other hand, when a physical change occurs, there is no rearrangement of atoms and there is no formation of a new substance. The physical appearance of the substance may change.

Now let us respond to the kind of change that happened in each case;

1) Chemical change

2) Physical change

3) Chemical change

4) Physical change

Learn more about chemical change:https://brainly.com/question/23693316

#SPJ1

pH of the given solution will be: 3

Given,

mass of nitric acid is 773mg = 0.773g

Molar mass of nitric acid is 63.01 mol

volume of solution is 180dm³

First we will obtain the concentration of Nitric acid by formula n = CV

C is the concentration

V is the volume of the solution

mass of acid is already provided in the question

we know that

no. of moles = given mass / molar mass

no. of moles of nitric acid = 0.773 / 63.01 = 0.12

C = n/V

C = 0.12 / 180 = 0.0006

We can find out pH by negative logarithm of H+ ( concentration)

pH = - log [ H+ ]

pH = - log [ 0.0006 ]

pH = 3.22 = 3

Therefore, pH of the solution is 3 (acidic)

Learn more about pH here:

https://brainly.com/question/13557815

#SPJ4

The correct option (D) Gamma ray. The Gamma-ray has the greatest penetrating ability among alpha, beta, gamma, and positron radiation.

The various emissions have very different levels of penetrating ability, also known as piercing power. A particle is the least incisive due to its size and slow emission. It can be blocked by a piece of paper or a human hand. Beta particles, which are more invasive than alpha particles, can be stopped by a small layer of metal.

Of the three main categories of emissions, gamma particles are the most harmful. A strong lead shield must be used to block gamma radiation. Fermions are a special case since they entirely disappear when they interact with electrons. The penetrating power of radioactive emissions is demonstrated by the generation of two 180-degree-distance gamma emissions as a result of an electron-positron collision.

To know more about Penetrating ability, visit:

https://brainly.com/question/1395897

#SPJ4

Answer: These are homogeneous elements

Explanation:

The complete sentences are as follows:

The molar concentration of a chemical specie in a solution, specifically the amount of a solute per unit volume of solution, is measured.

The most commonly used unit of molarity in chemistry is the number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units.

The number of moles of the solute present in one liter of solution is referred to as molarity. In layman's terms, 1 mole equals the atomic weight of the substance. 1 mole of acetic acid, for example, is equivalent to 60.05 g of acetic acid (molecular weight = 60.05). Method of calculation: Values that are well-known Glacial acetic acid density 1.049 g/ml.

Acetic acid is also used in the chemical reaction that yields purified terephthalic acid (PTA), which is used in the production of PET plastic resin, which is used in synthetic fibers, food containers, beverage bottles, and plastic films. Solvents: Acetic acid, like ethanol, is a hydrophilic solvent.

Learn more about molarity here:-

https://brainly.com/question/13412637

#SPJ4

The energy of the photon is the exact energy that is lost by the electron moving to its lower energy level. When the electron changes from n=3 or above to n=2, the photons emitted fall in the Visible Light region of the spectra. We call these lines Balmer's Series.

There is one orbital in an s subshell with 2 electrons, three orbitals in a psubshell with 2 electrons each, and 5 orbitals in a dsubshell with 2 electrons each. The total no. of electrons is 18 (maximum).

This means the individual orbital where n = 3, l = 2 will be '3d' because 3d orbitals have five subshells and the principal quantum number is 3. - We understand that a 3d orbital can adjust 10 electrons (each subshell can house two electrons). - Therefore the no. of electrons are n = 3, l = 2 are 10.

To learn more about principal quantum numbers visit the link

https://brainly.com/question/13312003

#SPJ4

A covalent bond involves sharing of electrons .

So, option D is correct one .

When two atoms share one or more pairs of electrons, a covalent link is created. A covalent bond is created when the difference between the electronegativities of two atoms is too small for an electron transfer to occur and produce ions.

The strongest covalent bonds are quadruple covalent bonds. The bond gets stronger the more bonding partners there are. The sharing of electrons between two species creates a covalent connection. They frequently exist between molecules with comparable electronegativities.

The strength of the bonds between the atoms is based on their quantity.

Covalent bonds can be single, double, triple, or quadruple.

learn about covalent bond here ,

https://brainly.com/question/10777799

#SPJ4

Heat is required to convert fe2o3 into pure iron. Heat required to convert 514 g fe2o3 into pure iron in the presence of excess carbon for is 753.02kJ.

Heat is amount of energy that is transmitted because of a change in temperature from one structure to its surroundings. Heat is transition from one medium or object to another of kinetic energy, or from an energy source to a medium or object. This is amount of heat needed to increase the temperature by one degree Fahrenheit of a pound of pure liquid water.

Heat is source of energy that is transmitted (flowing from the high temperature system to the low temperature system) between systems or objects of different temperatures. It is also known as the thermal energy or heat energy. The heat is typically measured in Btu, calories or joules.

The Heat of Reaction (also known and Enthalpy of Reaction) is change in the enthalpy of a chemical reaction that occurs at a constant pressure. It is a thermodynamic unit of measurement useful for calculating amount of energy per mole either released or produced in a reaction. Since enthalpy is derived from the pressure, volume, and internal energy, all of which are state functions, enthalpy is also a state function.

2Fe2O3 (s) + 3C (s) ⇒ 4Fe (l) + 3CO2 (g)

ΔH°= +467.9kJ

Using the unitary method,

2 moles of Fe2O3 requires = 467.9kJ heat

2* 159.69g Fe2O3= 467.9kJ heat

319.38g Fe2O3 requires = 467.9 kJ heat

hence, heat required for for 514g of Fe2O3 = [tex]\frac{514}{319.38}*467.9kJ[/tex]

heat required for 541g Fe2O3 = 753.02kJ

To know more about thermodynamic visit: https://brainly.com/question/1368306

#SPJ4

Fats or oils are created when the hydroxide group of glycerol combines in a dehydration synthesis process with the carboxyl group of fatty acids.

Your body loses more fluids when you are dehydrated than you are taking in. If unattended to, it could get worse and become a serious problem.

When you don't drink enough water or lose more than you take in, you become dehydrated. Sweat, tears, vomiting, urination, and diarrhea all cause fluid loss. Climate, level of physical activity, food, and other variables can all affect how severe dehydration is.

Dark urine, decreased urination, headaches, weariness, dry skin, decreased skin turgor, and poor focus are all indicators of dehydration.

To learn more about dehydration from the given link:

brainly.com/question/12261974

#SPJ4

The mass of the precipitate (AgCl) formed when 45.0 ml of 1.200 m of aqueous silver nitrate was mixed with 120.0 ml of 0.850 m of aqueous magnesium chloride is 7.73928 g.

Precipitate refers to the insoluble ionic solid products of a reaction. The formation of precipitate occurs when certain cations and anions combine in an aqueous solution.

To know the mass of the precipitate formed when aqueous silver nitrate and aqueous magnesium chloride are mixed, first is to get its balanced chemical reaction.

[tex]MgCl_{2(aq)} +2AgNO_{3(aq)}= 2AgCl_{(s)} +Mg(NO_{3} )_{2(aq)}[/tex]

This is a precipitation reaction where AgCl is the precipitate.

If the 45.0 ml aqueous silver nitrate has a concentration of 1.200 M, then
moles of solute = concentration x liters of solution

moles of AgNO3 = 1.200 mol/L x 0.045 L

moles of AgNO3 = 0.054

If the 120.0 ml aqueous magnesium chloride has a concentration of 0.850 M, then

moles of solute = concentration x liters of solution

moles of MgCl = 0.850 mol/L x 0.120 L

moles of MgCl = 0.102

From the balanced reaction, the mole ratio of the reactants and products are:

1 : 2 : 2 : 1

1 mole magnesium chloride mixed with 2 moles silver nitrate will produce 2 moles silver chloride and 1 mole magnesium nitrate

If there are 0.054 moles AgNO3, then it should react with 0.027 moles MgCl. The calculated number of moles of MgCl is in excess, thus making the AgNO3 the limiting reagent. The amount of product formed is limited by this reagent.

If there are 0.054 moles AgNO3, mixed with excess MgCl will produce 0.054 moles AgCl.

To solve for its mass, use the formula for its molar mass.

mass = molar mass x moles

mass AgCl = 143.32 g/mol x 0.054 moles AgCl

mass AgCl = 7.73928 g

To know more about precipitates: https://brainly.com/question/17171430

#SPJ4

Cu-63 and Cu-65 have 34 and 36 neutrons, respectively, in each atom. 27- Because copper has an atomic number of 29, which essentially implies that an atom of copper has 29 protons and 29 electrons, an atom of copper has a total of 29 electrons.

The stable isotope of copper is copper-63, which has a nuclear spin of 3/2, a relative atomic mass of 62.929601, and a natural abundance of 69.2 atoms. a trace element of a heavy metal having the atomic symbols Cu, 29, and 63.55. This atom has the mass number 63 because it is a copper-63 atom. Every atom of a particular element has the same atomic number, which may be determined as the element's number on the predictable.

Learn more about copper here-

https://brainly.com/question/19761029

#SPJ9

The balanced equation is a combustion reaction . The reaction is as follows:

2C₈H₁₈(g) + 25O₂(g) →16CO₂(g)+18H₂O(g)

Equating :

The number of moles in 20 grams of octane can be calculated as follows:

No. Of moles=mass/relative molecular mass.

=20/(12*8+1*8)

=20/104

=0.2moles

The reaction ratio is 2:25

Hence if 2 moles octane react with 25 moles of oxygen

According to the law of conservation of mass, the mass of the products must be same because the mass of the reactants in every chemical equation. Thus the amount of atoms of every element must be same on both sides of the equation.

2 moles of octane weigh = 2×114g/mol

                                         = 228g

25 moles of oxygen weigh = 25 × 32g/mol

                                         = 800g

Thus 228 g of octane reacts with 800 g of Oxygen.

20 g of octane reacts with  g of Oxygen.

                                 = [tex]\frac{800}{228} *20 = 70.2 g of oxygen[/tex]

What is combustion in a reaction?

combustion, a reaction between substances, usually including oxygen and typically accompanied by the generation of heat and light in the form of flame.Examples of Combustion Reactions

Imagine the wood burning during a fireplace. The wood is fuel which continuously reacts with oxygen within the air in a combustion reaction. the hearth produced is energy being released in a long exothermic reaction, while the smoke you see is CO2

What is the product of combustion reaction?

For a combustion reaction, the products will always be CO₂ (CO₂ C O 2 ) and water (H₂O H 2 O ). Combustion reactions always have two products: CO₂ and water.

Learn more about combustion reaction :

brainly.com/question/13251946

#SPJ4

A can of Red Bull provides the perception of increased energy because it contains a very high level of sugar and caffeine.

A methylxanthine class stimulant, caffeine stimulates the central nervous system (CNS). It is employed as a cognitive enhancer to improve alertness and attentional function. In order to increase the release of the neurotransmitter acetylcholine, caffeine works by preventing adenosine from attaching to the adenosine A1 receptor. Through nonselective inhibition of phosphodiesterase, caffeine also raises levels of cyclic AMP.

Chemically related to the adenine and guanine bases of ribonucleic acid and deoxyribonucleic acid (DNA), caffeine is a bitter, white crystalline purine known as a methylxanthine alkaloid (RNA). Many plants native to Africa, East Asia, and South America include it in their seeds, fruits, nuts, or leaves. By limiting the germination of neighboring seeds, it aids in protecting these plants from herbivores and competition.

To learn more about caffeine from the given link:

https://brainly.com/question/123461

#SPJ4

A typical atom's diameter is 10,000 times greater than its nucleus' diameter, and the nucleus is where the majority of the mass and density of the atom are concentrated.

At the center of each atom, there is a tiny, dense area known as the nucleus. It has a net positive charge because it is made up of positive protons and neutral neutrons. Although the nucleus only makes up a very small portion of the atom, it is where almost all of its mass is found.

A positively charged nucleus and one or more negatively charged particles known as electrons make up an atom. The atom has no excess of electrons because the positive charges cancel out the negative charges, making it electrically neutral.

To know more about atom :

https://brainly.com/question/1566330

#SPJ9

Answer:

Explanation:

520:2.54=204.7 round to 205 the answer=205 cm=520 inches