Answer:
When there is no spark from the reaction
Explanation:
The reaction between the acid and the magnesium metal goes into completion when there is no more spark from the magnesium. Also, the magnesium would have totally disappeared into solution.
These physical observation marks the end of the reaction.
When Mg reacts with HCl hydrogen bubbles are released. The completion of the given reaction can be determined by the presence of bubbles above the HCl.
The reaction between HCl and Mg:[tex]\bold {Mg+ 2HCl\rightarrow MgCl_2 + H_2}[/tex]
In this reaction, Mg reacts with 2 moles of HCl to form 1 mole of Magnesium chloride and release hydrogen gas.
During reaction,
Magnesium slowly disappears as it reacts with HCl.The hydrogen gas is released during the reaction, bubbles can be observed.Therefore, the completion of the given reaction can be determined by the presence of bubbles above the HCl.
Learn more about HCl and Mg:
https://brainly.com/question/10055668
Identify the titration curve for a monoprotic weak acid titrated with a strong base.
Answer:
Titration is a technique to determine the concentration of an unknown solution. As illustrated in the titration setup above, a solution of known concentration (titrant) is used to determine the concentration of an unknown solution (titrand or analyte).
Typically, the titrant (the solution of known concentration) is added through a burette to a known volume of the analyte (the solution of unknown concentration) until the reaction is complete. Knowing the volume of titrant added allows us to determine the concentration of the unknown analyte. Often, an indicator is used to signal the end of the reaction, the endpoint. Titrant and analyte is a pair of acid and base. Acid-base titrations are monitored by the change of pH as titration progresses.
Let us be clear about some terminologies before we get into the discussion of titration curves.
Using the van der Waals equation, calculate the pressure for a 1.25 mol sample of xenon contained in a volume of 1.000L at 75°C; a = 4.194 L2 atm/mol2 and b = 0.05105 L/mol for Xe. Compare these results to that predicted by the ideal gas law.
Answer:
ABC
Explanation:
hrdjyt
Which numerical setup can be used to calculate the
atomic mass of the element bromine?
Answer:
From the numerical steps highlighted under explanation, the average atomic mass of bromine is 79.91 u
Explanation:
The steps to be taken will involve;
1) Find the number of isotopes of bromine.
2) Identify the atomic mass and relative abundance of each of the isotopes.
3) Multiply the atomic mass of each of the isotopes by their corresponding values relative abundance value.
4) Add the value in step 3 above to get the average atomic mass of bromine.
Now;
Bromine has 2 isotopes namely;
Isotope 1: Atomic mass = 78.92amu and a relative abundance of 50.69%.
Isotope 2: Atomic mass = 80.92amu and a relative abundance of 49.31%.
Using step 3 above, we have;
(78.92 × 50.69%)
And (80.92 × 49.31%)
Using step 4 above, we have;
(78.92 × 50.69%) + (80.92 × 49.31%) ≈ 79.91 u
The atomic mass of bromine has been calculated as 79.9062 amu.
The relative atomic mass of the element has been given as the mass of each isotope with respect to their abundance.
The atomic mass has been given as:
[tex]amu=\sum mass\;\times\;\% Abundance[/tex]
The available isotopes of Bromine have been:
Isotope 1 = 78.92 amu, and 0.5069 % abundance
Isotope 2= 80.92 amu, and 0.4931 % abundance
Submitting the values for the atomic mass unit of bromine ([tex]amu_{\text{Br}}[/tex]):
[tex]amu_{\text {Br}}= (78.92\;\times\;0.5069)\;+\;(80.92\;\times\;0.4931)\\amu_{\text{Br}}=40.0045\;+\;39.9016\\amu_{\text{Br}}=79.9062[/tex]
The atomic mass of bromine has been calculated as 79.9062 amu.
For more information about atomic mass, refer to the link:
https://brainly.com/question/5566317
Which of the two forces is greater the force on the firefly or the force on the bus explain your answer please I really need help please
It’s due today please
Answer: The force on the firefly
The unfortunate firefly hitting the bus does not change the velocity of the bus very much. Technically there is a change, but it's so very small and miniscule that it barely registers. To any casual observer not paying very close attention, they don't notice anything at all. So effectively the force on the firefly is a lot greater since the firefly got the worst end of the deal.
So in short, we look at the velocity of each object and see which velocity changed the most. In this case, the firefly's velocity changed from whatever speed it was flying to 0 when it stops flying all together. That's why the force is greater on the bug.
In the reaction of aluminum metal and oxygen to make aluminum oxide, how many grams of oxygen gas will react with 2.2 moles aluminum metal?
Answer:
52.8 g of O2.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
4Al + 3O2 —> 2Al2O3
From the balanced equation above,
4 moles of Al reacted with 3 moles of O2 to produce 2 moles of Al2O3
Next, we shall determine the number of mole of O2 needed to react with 2.2 moles of Al. This can be obtained as follow:
From the balanced equation above,
4 moles of Al reacted with 3 moles of O2.
Therefore, 2.2 moles of Al will react with = (2.2 × 3)/4 = 1.65 moles of O2.
Thus, 1.65 moles of O2 is needed for the reaction.
Finally, we shall determine the mass of O2 needed as shown below:
Mole of O2 = 1.65 moles
Molar mass of O2 = 2 × 16= 32 g/mol
Mass of O2 =?
Mole = mass/Molar mass
1.65 = mass of O2 /32
Cross multiply
Mass of O2 = 1.65 × 32
Mass of O2 = 52.8 g
Therefore, 52.8 g of O2 is needed for the reaction.
X-rays are often used in medical settings to create images of the body's internal structures such as bones. This is made possible by the
fact that X-rays are able to pass through the body's softer tissues without being absorbed.
Radio waves are also able to pass through the body's softer tissues without being absorbed. Why are radio waves not used to generate
medical images?
OA. The electrons in most atoms are not in high enough energy states to absorb the photons of radio waves.
OB. Radio waves tend to bend too much when they encounter solid materials to be used for generating accurate images,
OC
The frequency of most radio waves is too low to allow them to pass through bones or other solid materials.
OD.
Radio waves carry so little energy that they tend to pass through most atoms without an interaction taking place.
Answer:D
Explanation:I did it on study island.
Radio waves are not used to generate medical images because as per the electromagnetic spectrum ,the radio waves carry little energy that they pass through most atoms without interaction.
What is an electromagnetic spectrum?The electromagnetic spectrum consists of radiation which consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ2
The temperature of a sample of CH4 gas (10.34 g) in a 50.0 L vessel at 1.33 atm is ________ °C.
a.
984
b.
-195
c.
-1260
d.
-195
Answer:
option C is correct
Explanation:
Considering the ideal gas law and the definition of Avogadro's Number, the correct option is option a. The temperature of a sample of CH₄ gas (10.34 g) in a 50.0 L vessel at 1.33 atm is 984 °C.
In first place, you have to know that ideal gases are a simplification of real gases that is done to study them more easily.
It is considered to be formed by point particles, do not interact with each other and move randomly. It is also considered that the molecules of an ideal gas, in themselves, do not occupy any volume.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T).
The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P×V = n×R×T
In this case, being the molar mass of CH₄ being 16 [tex]\frac{g}{mole}[/tex], that is, the mass present in one mole of an element or compound, the number of moles that 10.34 grams contains is calculated as:
[tex]10.34 g*\frac{1 mole}{16.04 g} = 0.645 moles[/tex]
So, you know:
P= 1.33 atmV= 50 Ln= 0.645 molesR=0.082 (atm×L)/ (mol×K)T= ?Replacing:
1.33 atm × 50 L= 0.645 moles× 0.082 (atm×L)/ (mol×K) ×T
Solving:
T= [1.33 atm × 50 L] ÷ [0.645 moles× 0.082 (atm×L)/ (mol×K) ]
T≅ 1257 K
Being 273 K equivalent to 0 C, then:
T= 1257 K= 984 C
In summary, the correct option is option a. The temperature of a sample of CH₄ gas (10.34 g) in a 50.0 L vessel at 1.33 atm is 984 °C.
Learn more about the ideal gas law: brainly.com/question/4147359?referrer=searchResults
Washing machines use a large amount of water. A student suggested that old pairs of stained jeans which have to be washed more frequently should be replaced by new pairs of jeans to conserve water. Which of these statements best describes the suggestion made by the student? Question 9 options: It is not practical because an old pair of jeans needs less water to be washed than a new pair of jeans. It is practical because a huge amount of water can be conserved by this method. It is practical because it is easy to implement. It is not practical because it takes a huge amount of water to produce a new pair of jeans.
Answer:
C |||| It is not practical because it takes a huge amount of water to produce a new pair of jeans
Explanation:
If you're doing flvs then it's C.
Answer:
C!
Explanation:
i got it right on the test UwU