Answer: The correct order of energy transformation is from CHEMICAL ENERGY to ELECTRICAL ENERGY to LIGHT ENERGY
Explanation:
Energy which is simply defined as the ability to perform work is made up of different forms, these include:
- Mechanical energy: Associated with machines at work.
- LIGHT ENERGY: produced by light bulbs
- ELECTRICAL ENERGY: taking in by television set and other electrical appliances.
- CHEMICAL ENERGY: stores in food and other fuels
- Sound energy: Produced by vibrating objects example piano, drums.
According to the law of conservation of energy, energy can neither be created nor destroyed in a closed system, but can be transformed from one form to another, thereby keeping the energy in the closed system constant. From the question, the circuit is an example of a closed system and the order of energy transformation taking place is from the battery (CHEMICAL ENERGY) to ELECTRICAL ENERGY(power source) to LIGHT ENERGY(bulb). I hope this helps, thanks.
A car weighing 12,000 N is parked on a 36° slope. The car starts to roll down the hill. What is the acceleration of the car?
Answer: 5.8 m/s squared
Explanation: just got that question lol
Neha and Suhani are playing with two identical pendulums. They leave the bob from a certain position and wait for it to return to the same point. The one who waits for a shorter time wins. Neha leaves her pendulum from point L and Suhani leaves her pendulum from point P (see figure). What happens?
a. Neha wins as her bob comes back faster.
b. Suhani wins as her bob comes back faster.
c. No one wins as the bobs come back at the same time.
d. We cannot say any of the above for sure.
Answer:
The correct option is C
Explanation:
The pendulum bob would return at the same time because the initial angle a pendulum bob is dropped does not affect it's period (the time it takes for the pendulum to move back and forth), however the one with a larger angle move faster but would eventually arrive at the same "starting point" due to varying displacements made.
c. No one wins as the bobs come back at the same time.
The pendulum bob would return at the same time because the initial angle a pendulum bob is dropped does not affect it's period (the time it takes for the pendulum to move back and forth), however the one with a larger angle move faster but would eventually arrive at the same "starting point" due to varying displacements made.The longer the length of string, the farther the pendulum falls; and therefore, the longer the period, or back and forth swing of the pendulum. The greater the amplitude, or angle, the farther the pendulum falls; and therefore, the longer the period.)Learn more:
brainly.com/question/12886217
if you know how to SHiFT in sleep how do you do it
what is gravity ?short ans
Answer:
Gravity, or gravitation, is a natural phenomenon by which all things with mass or energy—including planets, stars, galaxies, and even light—are brought toward one another. On Earth, gravity gives weight to physical objects, and the Moon's gravity causes the ocean tides.
Safety belts protect people in cars in the event of an accident because, according to Newton’s laws of motion, when an impact causes the car to suddenly change its motion -
A.the speed of the people always increases, since now they have not one but two forces acting on them.
B.the speed of the car always increases, giving it greater force since the mass will remain the same.
C.the car now has a greater overall mass - its own mass plus the mass of the object by which it has been struck.
D.the people in the car will continue to move in the same direction and at the same speed as before the impact.
Answer:
D :)
Explanation:
When an impact causes the car to suddenly change its motion, (D) the people in the car will continue to move in the same direction and at the same speed as before the impact.
What is Newton's first law of motion?
Newton's first law of motion states that Unless influenced by an imbalanced force, a body at rest stays at rest, and a body in motion keeps moving in a straight path at a constant pace. This law is commonly known as law of inertia and the resistance of a body to maintain its state of rest is called inertia of rest, same as, the resistance of a body to maintain its state of motion is called inertia of motion.
When a car is moving with certain speed, the car along with the people inside the car is in inertia of motion. In an event of accident, the car comes in rest in no time but the man in the car is still in inertia of motion. So, his body moves forward in the car which may cause injuries. To prevent such injuries, the people inside a car are advised to use safety belts.
So, correct answer is option (D).
Learn more about Newton's first law of motion here:
https://brainly.com/question/974124
#SPJ2
Conclusion When there is a constant unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will _____________________________. When there is an increasing unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will ________________________. When there is a constant unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________. When there is an increasing unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________.
Explanation:
When there is a constant unbalanced force applied in the same direction as the motion, speed will increase and acceleration will remain constant. When there is an increasing unbalanced force applied in the same direction as the motion, speed will increase and acceleration will increase.
According to newton's 2nd law
F = ma
F ∝ a
meaning when F increases , a increases and vice versa
What statement provides an example of designing a solution in the technological design process? Aerospace engineers need a lightweight material to build a jet. Engineers determine which features the material must have. Engineers test a carbon-plastic compound in a wind tunnel. The carbon-plastic compound is redesigned to save maximum energy.
Answer:
Engineers determine which features the material must have.
Explanation:
The statement provides an example of designing a solution in the technological design process is B. Engineers determine which features the material must-have.
what is the procedure for designing answers to technological issues?Steps of the technological layout system encompass: pick out trouble, research the hassle, generate possible answers, pick out the fine solution, create a version, test the model, refine and retest the model as wished, and talk the final answer.
What is a design solution?The design answer definition can be used to generate the quit product specifications with a view to be used to produce the product and to conduct product verification. This technique may be in addition delicate depending on whether or not there are extra subsystems of the quit product that need to be defined.
Learn more about Design solutions at https://brainly.com/question/5690102
#SPJ2
Is this statement true or false?
Line spacing refers to the amount of space between each line in a paragraph.
true
false
Answer:
True
Explanation:
I just took the test and got 100
5. Define joint
answer asap plz and ty
Answer:
A point at which parts of an artifical structure are joined
The energy transferred between objects in contact as of temperature difference is called what?
Answer:
Heat
Explanation:
Answer:
Heat conduction, also called diffusion, is the direct microscopic exchange of kinetic energy of particles through the boundary between two systems.
Explanation:
A force of 15N is exerted on an area of 0.1 m squared. what is the pressure
Answer:
1The force is with u. Lol no Idea if this is correct sry if u fail. I go must now
Newton's first law of motion: Objects in motion will stay in motion and objects at rest will stay at rest, unless acted on by
a. friction
b. acceleration
c. unbalanced force
d. contact force
Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia
24. A soccer ball is kicked straight up into the air with a velocity of 10 m/s. How much time does it take the ball to reach its maximum height? (g = 10 m/s^2)
A 2 sec
B 100 sec
C 1.4 sec
D 1 sec
Answer:
D. Time t = 1 [s]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]v_{f}=v_{o}-g*t[/tex]
where:
Vf = final velocity = 0 (when the ball reaches the maximum height its elevation won't be increased since the velocity is zero)
vi = initial velocity = 10 [m/s]
g = gravity acceleration = 10 [m/s²]
t = time [s]
Now replacing:
[tex]0 = 10-10*t\\10 = 10*t\\t = 1 [s][/tex]
which has an effect on acceleration (speeding up, slowing down, or changing direction)?
Explanation:
If acceleration points in the same direction as the velocity, the object will be speeding up. The acceleration points in the same direction as the velocity if the car is speeding up, and in the opposite direction if the car is slowing down.
Two carts connected by a 0.25 m spring hit a wall, compressing the spring to 0.1 m. The spring constant k is 100 N m . What is the elastic potential energy stored from the spring's compression?
Given that,
Initial position of the spring, x₁ = 0.25 m
Final position of the spring, x₂ = 0.1 m
The spring constant of the spring, k = 100 N/m
To find,
The elastic potential energy stored from the spring's compression.
Solution,
The work done in moving a spring from on position to another is stored in the form of elastic potential energy. It can be given as follows :
[tex]E=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\=\dfrac{1}{2}\times 100\times (0.1^2-0.25^2)\\\\=2.62\ J[/tex]
So, the required energy is 2.62 J.
Answer:
1.125 J
Explanation:
The correct answer is 1.125 J
A projectile was launched horizontally with a velocity of 468 m/s, 1.86 m above the ground. Calculate how long it would take for the projectile to hit the ground, to the nearest tenth of a second. Record your answer in the boxes below. Be sure to use the correct place value.
Answer:
0.6 seconds
Explanation:
The time to fall from height h is ...
t = √(2h/g)
t = √(2(1.86 m)/(9.8 m/s^2)) ≈ √0.3796 s ≈ 0.616 s
It would take about 0.6 seconds for the projectile to hit the ground.
Answer:
0.6 seconds
is ur answer :)
✌❤
If you weight 100 pounds on earth how much would you weight on the moon
Answer:
You should weigh about 16 pounds.
Explanation:
To find this, you need to find your weight and divide it by 6 to find your weight on the moon.
Heat flows from __________ energy to __________ energy.
A. higher, lower
B. lower, higher
Answer:
A. higher, lower
Explanation:
Hope this helps! :3
plz mark as brainliest!
A can of corn heas a diameter of 6.6 centimeters and a height of 9.9 centimeters. How much corn can tue can hold?
Answer:
338.7cm
Explanation:
The can of corn would be in the shape of a cylinder. Since we are looking at capacity, we will want to find the volume.
V=abase×h
V=πr2×h
V=π(d2)2×h
V=π(6.62)2×9.9
V=338.7cm3
Hopefully this helps!
Answer:
338.7 cm³
Explanation:
For this question you use the volume formula of a cylinder πr²h.
Radius is 1/2 the diameter.
Simply input the variables into the formula.
π(3.3)²×9.9 = 107.811π or approximately 338.7 cm³
6. What force causes the convection cell to turn down at point C?
Changes of state occur when there is a change in:
Thermal energy
Electromagnetic energy
Chemical energy
Electrical energy
What does someone with low self esteem look like
They feel they are, overall, bad people without any particular skills or value, when they are not.
I hope this helps you
God bless and have an awesome weekend
:)
You are classifying an organism that is unfamiliar to you.
Which characteristic would be most helpful in identifying it?
A. energy source
B. behavior
C. structure
D. communication
O E. movement
Answer:
I know that we can identify it
Explanation:
C. structure
Answer:
C
Explanation:
In order to know what organism is it, you must obeserve its structure, behavior, movement but the most important is structure.
Complete the following sentences.
mento
When you drop a ball, it falls to the ground,
This happens because the
pulls the ball
towards it with a force called
I
Forces are measured in units called
(Total 3 marks)
a running person has a what you need. Mass of 60kg and a speed of 3.16m/s what is her kinetic energy?
Answer:
[tex]\boxed {\boxed {\sf 299.568 \ Joules }}[/tex]
Explanation:
Kinetic energy can be found using the following formula:
[tex]E_k=\frac{1}{2}mv^2[/tex]
where m is the mass and v is the velocity.
The mass of the person is 60 kilograms and the velocity is 3.16 meters per second
[tex]m= 60 \ kg \\v= 3.16 \ m/s[/tex]
Substitute the values into the formula.
[tex]E_k=\frac{1}{2} (60 \ kg) *(3.16 \ m/s)^2[/tex]
First, evaluate the exponent.
(3.16 m/s)²= (3.16 m/s) * (3.16 m/s) = 9.9856 m²/s²[tex]E_k=\frac{1}{2}(60 \ kg ) (9.9856 \ m^2/s^2)[/tex]
Multiply 60 kg by 9.9856 m²/s²
[tex]E_k=\frac{1}{2} (599.136 \ kg*m^2/s^2)[/tex]
Multiply 599.136 kg*m²/s² by 1/2, or divide by 2.
[tex]E_k=299.568 \ kg*m^2/s^2[/tex]
1 kg*m²/s² is equal to 1 Joule Therefore, our answer of 299.568 kg*m²/s² is equal to 299.568 Joules.[tex]E_k= 299.568 \ J[/tex]
The running person has a kinetic energy of 299.568 Joules.
Solution:
We know that, Kinetic energy(kE)= 1/2×m×v^2
By applying formula,we get
Or,KE=1/2×60×3.16^2
Or,kE=299.57j
So,her kinetic energy is 2999.5j
A 75.0kg diver falls from a 3.00m board into the water. She goes 2.40m into the water before stopping. What is the average force the water exerted on the diver?
Answer:
The potential energy of the diver at the top is equal to the net work needed to be done to stop the diver.
PE = W
mg(h+d) = Fd
Explanation:
If a bicycle has an average acceleration of -0.44 m/s^2, and its initial forward velocity is 8.2 m/s, how long will it take the cyclist to bring the bicycle to a complete stop
Answer:
The value is [tex]t = 18.6 s[/tex]
Explanation:
From the question we are told that
The average acceleration of the bicycle is [tex]v = -0.44 \ m/s^2[/tex]
The initial forward velocity is [tex]u = 8.2 \ m/s[/tex]
Generally from kinematic equations we have that
[tex]v = u + at[/tex]
Here v is the final velocity of the bicycle and the value is v = 0 m/s
So
[tex]0 = 8.2 + (-0.44)t[/tex]
=> t = 18.6 s
part 1 of 2
A neutron in a reactor makes an elastic
head-on collision with the nucleus of an atom
initially at rest.
Assume: The mass of the atomic nucleus is
about 11.1 the mass of the neutron.
What fraction of the neutron's kinetic en-
ergy is transferred to the atomic nucleus?
part 2 of 2
In the initial kinetic energy of the neutron
is 1.77 x 10^-13 J. find its final kinetic energy.
Answer in units of J.
Answer:
for part 1 the answer is 0.303
Explanation:
Which forms of heat transfer do not require matter(particles) to happen? (Select all that apply)
Conduction
Convection
Radiation
None of these
Answer:
Radiation
Explanation:
bc Radiation transfers heat through electromagnetic waves.
Cumulative Exam
Cumulative Exam Review
Active
2
Which best compares concave and plane mirrors?
Plane mirrors produce only virtual images, and concave mirr
Plane mirrors produce only real images, and concave mirror
Concave mirrors produce only real images, and convex mirro
Answer:
Explanation:
Hi! It would be A. Plane mirrors produce only virtual images,and concave mirrors produce real and virtual images.
Plane mirrors construct only virtual images, and concave mirrors make real and virtual images. Thus, this statement best corresponds concave and plane mirrors.
What are virtual images?A virtual image exists represented as the opposite of a real image, thus an image that cannot be obtained on a screen stands produced as a virtual image. The motivation for this exists in the fact that the beams of light that form a virtual image never connect therefore a virtual picture can never be projected onto a screen. Examples: Image formed in a plane mirror, an image constructed on the front and back surfaces of a spoon, etc.
Therefore, the (A) option exists as the accurate answer.
To learn more about the virtual image, refer here :
https://brainly.com/question/9861899
#SPJ2