There is a positive acceleration where −x direction decreasing in speed.
What is acceleration?The term acceleration refers to the change of velocity with time of the body. Now we know that both velocity and acceleration are both vector quantities. We have to put the direction into consideration when looking at the acceleration of a body.
The case in which the car has a positive acceleration is the option where a car has a negative velocity and a positive acceleration is −x direction decreasing in speed.
Learn more about acceleration:https://brainly.com/question/13295696
#SPJ1
Missing parts;
In which of the following cases does a car have a negative velocity and a positive acceleration? A car that is traveling in the Check all that apply. Check all that apply.
a.+x direction decreasing in speed.
b.+x direction increasing in speed.
c.−x direction decreasing in speed.
d.−x direction increasing in speed.
e.−x direction at a constant 20 m/s.
What do you observe when you hold your largest plastic shopping bag square between the light source and the wall
The thing i observe if I hold a largest plastic shopping bag square between the light source and the wall is that since the plastic is Translucent, it allow some measures of light to pass through it. When light hits the translucent materials, since it is big and little thicker, only some of the light went through them.
What happens to light when it travels through air and meets an opaque surface?As light travels through air as well as into a clear material (such as glass), it speed is altered, and light is said to be reflected and also refracted by the said glass
Note that Light can pass through some kind of materials, such as glass, water, plastic that is clear and transparent materials.
Therefore, The thing i observe if I hold a largest plastic shopping bag square between the light source and the wall is that since the plastic is Translucent, it allow some measures of light to pass through it. When light hits the translucent materials, since it is big and little thicker, only some of the light went through them.
Learn more about light reflection from
https://brainly.com/question/18772331
#SPJ1
If the connection to the resistor is completed at time tt = 0, what is the value of tt when the current has the value specified in part a?
Finding the initial and final values for the quantity that the capacitor or inductor opposes changing—i.e., the quantity that the reactive component is seeking to maintain constant—is the first stage.
This amount is voltage for capacitors and current for inductors. This amount is to be used as the "beginning" value because when the switch in a circuit is closed (or opened), the reactive component will try to keep that quantity at the same level as it was before the switch transition. This quantity's ultimate value is whatever it will be after an infinitely long period of time.
Learn more about quantity here-
https://brainly.com/question/12986460
#SPJ4
explain the importance of body temperature regulation
Answer:
is an early warning sign of infection
Explanation:
it allows organs and bodily proccess to work effectively
What kind of boundary is shown in the image below?
Convergent
Divergent
Collisional
Transform
Answer:
ambt kaon✌️jhrhriekeieieieiei
Explanation:
iwuejejwiowksj
3.if kiis 44 nm for (-)d9-thc and 4350 nm for cbd what is the binding free energy difference, in kj/mol?
The correct answer is 0.00981 kJ/mol.
Every object we encounter has a binding force, and the energy that holds them together is the binding energy. The binding energy is the least amount of energy necessary to remove an electron, proton, or neutron from the nucleus. A nucleus contains electrons and protons that are strongly bound by energy.
Free energy of binding can be calculated using formula, Gbinding = dE coluombic + dEvdw + dGhyd. -TdS where Evdw+Ecoulombic is protein ligand interaction, dGhyd is change in hydration energy.
dS is entropy. dG hydration is Gpolar+Gnon polar. Inhibition constants are given for CBD and
THC = 4350nm, and 44nM. So,
dG = Ki + Ki' = 44+4350 = 4394 and
in kJ/mol = NahC/4394 = (6.022x10^23x6.626x10^-34x3x10^8)/4394 = 0.00981 kJ/mol
To learn more about binding energy refer the link:
https://brainly.com/question/13162889
#SPJ4
Given that vector a b = c, and that lal lbl = lcl, how are vectors a and b oriented with respect to each other?
Vector a b = c, and that |al |b| = |cl, vectors a and b oriented with respect to each other because they are perpendicular to each other.
What is a vector?A vector is an object that has both magnitude and a direction. Geometrically, we can picture vector as a directed line segment, whose length is the magnitude of the vector and with an arrow indicating the direction. The direction of vector is from its tail to its head.
Two vectors are the same if they have same magnitude and direction. This means that if we take a vector and translate it to a new position (without rotating it), then vector we obtain at the end of this process is the same vector we had in beginning.
Two examples of vectors are those that represent the force and velocity. Both the force and velocity are in a particular direction. The magnitude of vector would indicate the strength of the force or the speed associated with the velocity.
We denote vectors using the boldface as in a or b. Especially when writing by hand where one cannot easily write in boldface, people will sometimes denote vectors using the arrows , or they use the other markings. We won't need to use the arrows here. We denote magnitude of the vector a by |a|. When we want to refer to a number and stress that it is not a vector, we can call number a scalar. We will denote scalars with the italics, as in a or b.
To know more about stress visit: brainly.com/question/14582509
#SPJ4
the home owner report that sometimes the electric furnace trip the 240-v 60-a circuit breaker connected to it
The homeowner has reported that sometimes the electric furnace trips the 240-V, 60-A circuit breaker connected to it. Upon examination, it is found that the furnace contains three 5000-W heating elements designed to turn on in stages.
SolutionThe power rating of the circuit breaker = volt x current
= 240 x 60
= 14400 W
So, we have 3 units of 5000W each.
Explanation and RecommendationWhen the first unit is turned on, the consumption is 5000W and the circuit breaker does not trip. When two of the 5000W units are turned on, it adds up to a consumption of 10000W.
The circuit breaker is still intact. But when the 3rd 5000W unit is turned on, the consumption reached to 15,000W which is greater than the 14,400W mark, and thus the circuit breaker trips off.
So, switching on all three units at once can cause the circuit breaker to trip off.
So, the recommendation would be that at a particular time maximum of two units can be turned on.
Even such, the two units cannot be turned on in series or they won’t receive 240 V each.
Another recommendation would be to use a circuit breaker of a higher power rating, more than 15,000W so that there will be no tripping.
To know more about circuit breakers, visit:
https://brainly.com/question/17040163
#SPJ4
at perigee, the moon is 364,000 km from earth. at apogee, it is 407,000 km away. how many times larger does the moon appear to us during perigee than at apogee? the linear diameter of the moon is 3,480 km.
The moon appears 1.1153 during perigee than at apogee.
What is perigee?Perigee is the point at which the moon is nearest to the Earth each month.
The points of apogee and perigee varies throughout the year.
Apogee is the point at which the moon is farthest to the Earth each month.
from the data given,
perigee= 364000km
Apogee= 407000km
diameter= 3480km
p/a = 406,000/364,000
= 1.1153.
Thus, the moon appears 1.1153 during perigee than at apogee.
In conclusion, it has been scientifically found that in periods of four years, lunar perigees and apogees fall on the same or nearly the same calendar dates.
Learn more about perigee at: https://brainly.com/question/670576
#SPJ1
Using your model create the following scenarious first quarter moon
The first quarter in which half the Moon appears illuminated, occurs when the Moon is at a right angle with respect to the Sun when viewed from the Earth.
How do moon's different illumination occur?The Moon is a non illuminating celestial object and doesn't have its own light but reflects the light of the sun and with change in angle between moon and Sun the different phases of the moon appear as seen from earth.
Given:
The Moon is in the first quarter of illumination.
In the first quarter of the moon the only one-fourth of the sun is illuminated and is observable from earth.
For this to happen only the visibly i.e. one-fourth of the moon should be reflecting back the light of the sun.
For this to happen the moon shouldn't be completely opposite to the sun behind the earth. But rather at right angles with respect to the sun when seen from earth.
Therefore, The first quarter in which half the Moon appears illuminated, occurs when the Moon is at a right angle with respect to the Sun when viewed from the Earth.
Learn more about the different moon phases here:
https://brainly.com/question/12676209
#SPJ9
I already did the first slide but it ahs to do with the second one. Please answer in complete sentences
Answer:
huhu
chuba bi miayang yo
trip rp rrip trip
Explanation:
how are things going with your family in the car with the family in because or am we supposed for a car to stay at the airport and get a taxi
The speed of a bullet train is measured to be 312.0 mph ± 3.9 mph. What is the percent uncertainty in this measurement?
Answer: 1.3%
The speed of a bullet train is measured to be 312.0 mph ± 3.9 mph. What is the percent uncertainty in this measurement?(1 point) 1.3%
How+many+time+constants+must+elapse+if+an+initially+charged+capacitor+is+to+discharge+55%+of+its+stored+energy+through+a+resistor?
4 time constants must elapse if an initially charged capacitor is to discharge 55% of its stored energy through a resistor.
What do you understand by the term capacitor?
A capacitor is created with the two metal plates and an insulating material known as a dielectric. The metal plates parallel but are placed very close to each other . The dielectric is placed between them to make sure they don't touch each other.What is a capacitor used for?
Capacitor is a device used for storing electrical energy. A simple example of such a storage device is the parallel-plate capacitor.How many types of capacitors are there?
There are two major types of capacitors: Fixed Capacitors and Variable Capacitors. They include non-polarized and polarized for the fixed group and tuning and trimming for the variable group.To learn more about capacitors, refer to:
brainly.com/question/15109612
#SPJ4
an infinitely long charged rod has uniform charge density of λ, and passes through a cylinder (gray). the cylinder in case 2 has twice the radius and half the length compared to the cylinder in case 1.
To compare the magnitude of flux through the surface wherein the cylinder in 2 has twice the radius and half the length compared to the cylinder in case 1 and this comparison in magnitude is given as ϕ= 2ϕ.
How would you define charge density?The charge density can be defined as a measurement of the amount of electric charge that is present per unit of surface area, body volume, or field.
The amount of charge that is held in a specific field is determined by the charge density. It is absolutely possible to calculate charge density of an object in terms of length, area, or volume.
How can you determine a rod’s charge density?If q is taken as the charge and l is the distance that it travels, then q/l is the formula for the linear charge density, and the S.I. Coulombs per meter (cm1) is the unit used to measure linear charge density.
What is the unit of charge density?The general response is most conveniently expressed in terms of the linear charge density, which is equal to Q/L for a finite rod of length L and total charge Q.
To know more about flux, visit:
https://brainly.com/question/14527109
#SPJ4
If a person practicing yoga for one hour burns 285 kilocalories (kcal), how many joules (j) of energy have they burned?
The person that practicing yoga for one hour burns 285 kilocalories (kcal) burned: 1192440 j of energy
To solve this problem the we have to do the conversion of units with the given information.
Information about the problem:
energy =285 kilocalories (kcal)energy expressed in joules (j) = ?1 kilocalorie (kcal)= 4184 joules (j)By converting the energy units from kilocalories (kcal) to joules (j) we have:
energy =285 kcal * 4184 j/ 1 kcal
energy = 1192440 j
What is unit conversion?It is the transformation of a value expressed in one unit of measurement into an equivalent value expressed in another unit of measurement of the same nature.
Learn more about unit conversion at: brainly.com/question/141163
#SPJ4
As a giant cloud of gas collapses due to gravity, you would expect its rate of rotation to.
Answer:
increase!!!
M V R describes the angular momentum of mass M
If R is decreased for a given mass M then the velocity must increase to account for the angular momentum being a constant (conserved).
Two+rocket+ships+approach+a+space+station+at+80%+of+the+speed+of+light.+each+pilot+observes+the+other+ship+approaching+at+____+the+speed+of+light.
Two rocket ships approach a space station at 80% of the speed of light. Each pilot observes the other ship approaching at 98% the speed of light.
What is the "Fastest" Speed of Light?Light moves at a constant, finite speed of 186,000 miles per second. A traveler traveling at the speed of light would circumnavigate the globe 7.5 times in one second. In comparison, a traveler in a jet aircraft traveling at 500 mph would cross the continental United States once in 4 hours.The speed of light in a vacuum, denoted c, is a universal physical constant that is important in many fields of physics. The speed of light c equals 299,792,458 meters per second.The speed of light is shared by all forms of electromagnetic radiation, including visible light. Light and other electromagnetic waves appear to propagate instantly for many practical purposes, but their finite speed has noticeable effects over long distances and with very sensitive measurements. Starlight seen from Earth long ago left the stars, allowing humans to study the history of the universe by viewing distant objects.
To learn more about Speed of Light refer to
https://brainly.com/question/25922783
#SPJ4
A boat travels 6 m/s across a river. The current pushes downstream at 8 m/s. If the river is 104 m wide, then:
At a certain temperature, the phph of a neutral solution is 7.68. what is the value of kwkwk_w at that temperature?
Kw = 4.36×10^-16 is the value of kw at temperature when the ph of a neutral solution is 7.68.
The formula for Kw is:
Kw= [H]*[OH]
where [H] and [OH] are concentrations
We are given the pH so we can calculate the [H] concentration from the formula:
pH=-log[H]
[tex]P_{H} =-log_{10} [H^{+} (aq)][/tex]
[tex]-P_{H} =log_{10} [H^{+} (aq)][/tex]
[tex][H^{+} (aq)]=10^{-P_{H} }[/tex]
[tex][H^{+} (aq)]=10^{-7.68}[/tex]
[tex][H^{+}(aq) ]=[/tex]2.089×[tex]10^{-8}[/tex]mol [tex]dm^{-3}[/tex]
In neutral solution, [H] = [OH],
therefore: [OH]=2.089×10^-8M
Calculating Kw:
Kw = (2.089×10^-8M) *(2.089×10^-8M)
Kw = 4.36×10^-16
What is the pH of a neutral solution at 100 degrees Celsius, where equals?pH + pOH = 14.00 (at 25°C) for any neutral solution with pH=pOH=7. At 100°C, the kw for water is 4.991013. Determine the pKw of water at this temperature, as well as the pH and pOH of a neutral aqueous solution at 100°C. pH and pOH values should be reported to two decimal places.To learn more about value of kw refer to
https://brainly.com/question/25922783
#SPJ4
if you are driving 120 km/h along a straight road and you look to the side for 2.2 s , how far do you travel during this inattentive period?
During this inattentive period, the distance traveled is 73.33 when the speed is 120 km/h and the time taken is 2.2 s.
What connection exists between time, distance, and speed?Every moving object travels a particular distance over time. These two factors enable us to determine the speed. The frequency of displacement is the sole determinant of speed. The complete mobility of an object, regardless of direction, will be its distance. No matter where an object originates or finishes, distance measures how much ground it has travelled. A process, an action, or a condition's duration is the amount of time that can be measured or quantified. Speed is the rate at which an object travels along a path over time, whereas velocity is the speed and direction of an item's motion. In another sense, velocity is a vector, whereas speed is a scalar value. There is a formula that connects these three things. Speed can be thought of as a gauge for a body's rate of motion. The distance covered in a single unit of time is how it is defined.
Speed = Distance/ Time
We are given Average speed, = 120 km/h=(120 * 1000)/3600=33.33 m/s
Time, t=2.2s
Now speed = Distance/ Time
⇒ Distance = speed * time=33.33*2.2=73.33
Thus distance traveled is 73.33 m
To know more about speed, time and distance, click here:
https://brainly.com/question/14411565
#SPJ4
What happens to the width of the central maximum if the wavelength is increased?
The width of central maximum increases if the wavelength is increased.
What is the width of the central maximum?The width of the central maximum is simply the distance between 1st order minima from the center of the screen on both sides. Thus, the central maximum becomes twice as wide if the slit width a becomes half as wide.
How is central maxima affected?For one slit experiment, the size(angular width) of the central maximum is given by a 2 λ a , where a is that the slit width. therefore the width of the central maximum is directly proportional to the wavelength of light and inversely proportional to slit width.
What is central maximum of a wave?A central maximum is that the brightest central zone of a diffraction pattern on the screen. The central maximum has the utmost intensity and widest of all the other diffraction fringes
Learn more about wavelength of central maxima :
brainly.com/question/13104464
#SPJ4
An electrical device is listed as 3,000 watts. approximately how many horsepower is this?
By unit conversion, the power is 4.023 HP.
We need to know about unit conversion to solve this problem. The unit conversion can be used to convert a unit to another unit. It can be defined as
a = xb
where a is unit a, b is unit b and x is the constant of conversion.
From the question above, we know that
P = 3000 watts
unit conversion
(1 HP = 745.7 watts)
Convert the unit conversion
1 HP = 745.7 watts
divide by 745.7
1/745.7 HP = 1 watts
Convert the aspirin power to horsepower
P = 3000 watts
P = 3000 x 1/745.7 HP
P = 3000/745.7 HP
P = 4.023 HP
Find more on unit conversion at: https://brainly.com/question/4158962
#SPJ4
2)
2H₂O → 2H₂ + O₂
Describe the mass of the reactants and products given the balanced chemical reaction.
Reactants are substances that are present at the beginning of a chemical reaction.
Products are the substance(s) to the right of the arrow. A substance that remains after a chemical reaction is complete is known as a product.
Consider the balanced chemical equation:
2H₂O → 2H₂ + O₂
Hydrogen and oxygen are the reactants, and water is the product in the balanced equation.
The reactants and product symbols and formulae are known from the aforementioned equation.
One oxygen molecule and two hydrogen atoms unite to form two water molecules.
The ratio of reactant to product is 2 : 1 : 2.
The total mass of products is equal to the total mass of the reactants according to the law of conservation of mass.
Learn more about balanced equations here:
https://brainly.com/question/15355912
#SPJ9
motion observed from a particular frame of reference is
Answer:
one in which the motion of a particle not subject to forces is in a straight line at constant speed
Explanation:
I searched this on the internet
shot from a cannon in 1998, david "cannonball" smith set the distance record for being shot from a cannon (56.64 m). during a launch in the cannon’s barrel, his speed increased from zero to 80 km/h in 0.40 s. while he was being stopped by the catching net, his speed decreased from 80 km/h to zero with an average acceleration of 180 m/s2m/s2. what can you determine about smith’s flight using this information?
From this information, it can be determined that
acceleration of the shot = 56 m/s^2
stoppage time = 0.123s
stoppage path length = 1.37m
CalculationThe average acceleration while being shot by definition
a = [tex]\frac{\frac{80}{3.6} }{0.4}[/tex] = 56 m/s^2
Assuming that there is a constant acceleration we can determine the path covered during his acceleration as
s = 1/2a (0.4s)^2 = 4.5m
then we can find the stoppage time as
t3 = [tex]\frac{\frac{80}{3.6} }{180}[/tex] = 0.123s
Then the stoppage path length is defined as
s3 = [tex]\frac{(80/3.6)^2}{2a}[/tex] = 1.37m
Then the path length of travel with constant velocity is
s2 = 56.64m -s1 - s2 = 50.77m
Then time of flight
t2 = [tex]\frac{s_{2} }{80/3.6}[/tex] = 2.28s
Then we can determine the total time of flight as
t = t1 + t2 + t3 = 2.8s
Thus, we have
ashot = 56m/s^2
tstop = 0.123s
[tex]\delta x[/tex]stop = 1.37m
To know more about average acceleration, visit:
https://brainly.com/question/27184422
#SPJ4
A space shuttle is flying north at 6,510 m/s. It
then begins accelerating at 28.4 m/s2 directly
northeast to properly align its path towards
orbit around the Earth. After 60.0 s, what is
the direction of its velocity?
The direction of velocity is 81.12°
Given that,
Initially the space shuttle is flying North at 6510 m / sNext 60 seconds, it accelerates at 28.4 m / s² directly North-East.Velocity of the North-East travel = [tex]a_{NE}[/tex] * [tex]t_{NE}[/tex] = 28.4 * 60 = 1704 m / sSplitting the North-East travel into its horizontal and vertical components,Horizontal component = 1704 cos° 45 = 1204.9 m / sVertical component = 1704 sin° 45 = 1204.9 m / sThe vertical components are the north travel and the the vertical component of North-East travel. Total vertical velocity = 6510 + 1204.9 = 7714.9 m / sTotal Horizontal velocity = 1204.9 m / sThe resultant velocity makes a right angled triangle with the magnitude of total vertical and horizontal velocity.Since it is a right angled triangle,
tan θ = Opposite side / Adjacent side
tan θ = Total vertical velocity/ Total horizontal velocity
tan θ = 7714.9 / 1204.9 = 6.4
θ = [tex]tan^{-1}[/tex] ( 6.4 )
θ = 81.12 °
Therefore, the direction of its velocity is 81.12° with respect to x - axis.
To know more about magnitude of velocity
https://brainly.com/question/28185311
#SPJ1
F a = 2.0 cm, b = 3.0 cm, and i = 43 a, what is the magnitude of the magnetic field at point p?
The net magnetic force is 31.4×[tex]10^{-5}[/tex] T.
What is magnetic force?Data;
a = 1.0cm
b = 3.0cm
i = 30a
B = ?
The magnetic field at point 2 will be
[tex]B_{2}[/tex] = (μI/4[tex]\pi[/tex][tex]R^{2}[/tex]) ×Ф
[tex]B_{2}[/tex] = [tex]47.1[/tex]×[tex]10^{-5}[/tex] T
The magnetic field due at point 4 will be
[tex]B_{4}[/tex] = (μI/4[tex]\pi[/tex][tex]R^{2}[/tex]) ×Ф
[tex]B_{4}[/tex] = [tex]15.7[/tex]×[tex]10^{-5}[/tex] T
The direction of magnetic field due to 2 and 4 are in the opposite direction.
The Net magnetic force is
B = [tex]47.1[/tex]×[tex]10^{-5}[/tex] - [tex]15.7[/tex]×[tex]10^{-5}[/tex]
B = 31.4×[tex]10^{-5}[/tex] T
One of the four fundamental forces of nature, the electromagnetic force, results in the magnetic force, which is brought about by the motion of charges. When two charge-containing objects move in the same direction, a magnetic attraction pulls them together.
A magnetic field, a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. When a charge moves through a magnetic field, a force that is perpendicular to both its own velocity and the magnetic field operates on it. A permanent magnet's magnetic field pulls on ferromagnetic materials like iron and draws or repels other magnets.
To learn more about magnetic force from the given link:
brainly.com/question/10353944
#SPJ4
Find the lengths of the sides of the triangle pqr. is it a right triangle? is it an isosceles triangle?
NO, It is an Right Triangle
p(2 , - 1 0) Q ( 4, 1, 1) R( 4, -5, 4)
PQ2 = ( 2 -4)^2 + (-1-1)^2 +( 0-1)^2
PQ^2= (4 + 4 +1 )=9
PQ = 3
QR^2 = ( 4 - 4)^2 + ( 1 +5)^2 + ( 1-4 )^2
= 0 + 36 + 9 =45
QR = √45 =3√5
RP^2 = ( 4-2)^2 + ( -5 +1)^2 + (4-0)^2
= 4 + 16 + 16 = 36
RP = 6
LENGTH OF SIDES ARE 3 ,6 , 3√5
and ajsoPQ^2 + RP^2 = 9 + 36 = 45 =QR^2
PQR is a right angle triangle
To know more about Right Triangle visit : https://brainly.com/question/6322314
#SPJ4
if an arrow is shot upward on mars with a speed of 66 m/s, its height in meters t seconds later is given by y
Finding the common slope of the placement function for the term you're interested by will let you decide the common pace.
the absolute value of velocity is common pace, then again.
average pace and average pace are the same if the arrow constantly actions at a regular tremendous or bad speed. we will first pick out the places of high-quality and negative velocities.
Find the velocity equation first. It is y(derivatives: )'s
y'(t) = v(t) = [tex]66 - 3.72t[/tex]
Next, find the positive and negative values of this:
v(t) = 0 when t = [tex]66/3.72 = 17.74[/tex] seconds.
this means that v(t) is continually fine for all 3-time durations. As a result, all we want to do is calculate the average slope of y(t) during each period.
The average slope equation is made up of the slope between the beginning and finishing points = [tex][f(b) - f(a)]/(b-a)[/tex]:
Therefore, these are the calculations:
(i) vavg = [tex][y(2) - y(1)]/(2-1)[/tex]
(ii) vavg = [tex][y(1.5) - y(1))]/(1.5-1)[/tex]
(iii) vavg = [tex][y(1.1) - y(1)]/(1.1-1)[/tex]
Know more about the average slope:
https://brainly.com/question/14179254
#SPJ4
1. If a rock is dropped from a height and hits the ground in just 1 second, the speed at impact is 10 m/s. What would
happen to the speed if it is dropped from a higher height?
a. Its final speed would remain the same because its rate of acceleration would remain the same.
b. Its final speed would increase because the acceleration due to gravity remains the same.
c. Its final speed would remain the same because its rate of acceleration would decrease.
d. Its final speed would increase because the acceleration due to gravity would decrease.
Write a differential equation for the concentration of the chemical in the pond at time t. hint: the concentration is c = a/v = a(t)/106
The differential equation for the concentration of the chemical is given by dc/dt = (3/10⁶)(1 - 100c)
Suppose that a(t) is the amount of chemical in the pond at time t.
So, a'(t) = rate of chemical inflow - the rate of chemical outflow.
So, da/dt = (0.01)300 - (a/10⁶)300
So, da/dt = 3 - 3a/10⁴
Now,
Since, c = a/v
Then, c' = a'/v
So, c' = (3 - 3a/10⁴)/10⁶
Or, c' = 3 (1 - a/10⁴)/10⁶
So, dc/dt = 3/10⁶ (1 - cv/10⁴)
So, dc/dt = (3/10⁶) (1 - 100c)
Therefore the differential equation for the concentration of the chemical is dc/dt = (3/10⁶)(1 - 100c)
To learn more about differential equations and concentration, visit: https://brainly.com/question/14583279
#SPJ4