Indicate the method you would use to prove the two triangles congruent if new method applies, enter none. SSS, ASA, AAS, SAS, none.

Answer:

Step-by-step explanation:

domain is -infinity to positive infinity range is -3 to infinity. Increasing from -3 to infinity and decreasing from - infinity to -3 and it’s minimum

For the given integer, the maximum starting population size that will eventually lead to extinction is 98, since any larger value will result in the population either stabilizing at a positive value or growing indefinitely.

The equation in question is:

dN/dt = -0.001N(N - 110)(N - 99)

Here, N represents the population size, and dN/dt represents the rate of change of the population with respect to time. The right-hand side of the equation tells us how the population size changes over time, and it's determined by the current population size N, as well as the two constants 110 and 99.

We can do this by setting dN/dt equal to zero and solving for N:

dN/dt = -0.001N(N - 110)(N - 99) = 0

=> N = 0, N = 99, N = 110

We can then plot the direction field (i.e., arrows indicating the direction of change) on each interval, and use this to determine the behavior of the solution curve. In this case, we can see that the direction of the arrows changes at each critical point, indicating that the population behavior switches between growing and declining as we move from one interval to the next.

Specifically, we can see that if the initial population size A is less than 99, the population will decline to extinction. If the initial population size is between 99 and 110, the population will initially decline but then grow and eventually stabilize at N = 110. If the initial population size is greater than 110, the population will grow exponentially and tend towards infinity.

To know more about integer here

https://brainly.com/question/15276410

#SPJ4

where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.

To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:

[tex]A(t) = A0 * e^{(-kt)}[/tex]

where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.

To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:

[tex]3375 = A0 * e^{(-2k)[/tex]

We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:

Dividing both sides by 6000, we get:

ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.5625) = -2k[/tex]

Solving for k, we get:

[tex]k = -ln(0.5625)/2[/tex]

k ≈ 0.3118

Therefore, the function to model the situation of the flood is:

[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]

To learn more about function, visit

https://brainly.com/question/12431044

#SPJ1

The critical value of the chi-square distribution corresponding to a sample size of 5 and a confidence level of 98% is given as follows:

0.297 and 13.277.

To obtain a critical value, we need three parameters, given as follows:

Then, with the parameters, the critical value is found using a calculator.

The parameters for this problem are given as follows:

Using a chi-square distribution calculator, the critical values are given as follows:

0.297 and 13.277.

More can be learned about the chi-square distribution at https://brainly.com/question/4543358

#SPJ1

It is true that a linear programming problem can have an optimal solution that is not a corner point.

In linear programming, the optimal solution represents the point where the objective function is optimized while still satisfying all the constraints.

In some cases, the optimal solution may occur at a corner point of the feasible region, where two or more of the constraints intersect.

However, it is possible for the optimal solution to occur at a point that is not a corner point, but rather lies on an edge or a line segment of the feasible region.

This can occur when the objective function is parallel to one of the constraint lines or when there are redundant constraints that limit the feasible region.

Therefore, it is true that a linear programming problem can have an optimal solution that is not a corner point.

Learn more about linear programming.

brainly.com/question/15417573

#SPJ11

Thus, the on average the contents weight for the transatlantic shipping is found as  24.7  pounds.

Given dimension of rectangular prism

Length l = 4ft

width w = 9.5 ft

height h = 13 ft

Volume of rectangular prism = l*w*h

V = 4*9.5*13

V = 494 ft³

Now,

1  ft³ = 0.05 pounds

So,

weight of  494 ft³ =  494*0.05 pounds

weight of 494 ft³ =  24.7  pounds

Thus, the on average the contents weigh for the transatlantic shipping is found as  24.7  pounds.

know more about the rectangular prism

https://brainly.com/question/24284033

#SPJ1

Some possible prices for the socks that would meet this condition are $2.99, $2.50, $3.00, $2.95, etc.

A rate is a measure of the amount of change of one quantity with respect to another quantity. It expresses how much one quantity changes in relation to another quantity over a given time or distance.

If Diego has budgeted $35 for 5 pairs of socks and a pair of shorts, we can subtract the cost of the shorts from the total budget to find the amount he has left for the socks:

$35 - $19.95 = $15.05

To find the possible prices for the socks, we can divide the amount Diego has left by the number of pairs of socks he needs:

$15.05 / 5 pairs = $3.01 per pair

Therefore, Diego would be able to stay within his budget if he finds socks that cost $3.01 or less per pair. Some possible prices for the socks that would meet this condition are $2.99, $2.50, $3.00, $2.95, etc.

To know more about pair, visit:

https://brainly.com/question/29122030

#SPJ1

The number of poetry books at the library that are for children is 510

from the question, we have the following parameters that can be used in our computation:

Books = 600

If 8.5/10 of the poetry books are for children, we can calculate the number of poetry books for children as follows:

Number of poetry books for children = (8.5/10) x 600

Number of poetry books for children = 510

Therefore, there are 510 poetry books at the library for children.

Read more about proportion at

https://brainly.com/question/870035

#SPJ1

Answer:

236 cm^2  and  8 cm

Step-by-step explanation:

width=w

240=6(5)(w)

w=8 cm

area=2[(6)(5)+(6)(8)+(5)(8)]

area=236 cm^2

The surface area of the actual ramp, including the underside, is approximately 15.38 yd².

What is triangle?

A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.

To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.

We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.

Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:

height of actual ramp / height of model = 21.6 in / 3 in = 7.2

We can use this ratio to find the dimensions of the actual ramp:

height of actual ramp = 7.2 * 3 in = 21.6 in

length of actual ramp = 7.2 * 8 in = 57.6 in

width of actual ramp = 7.2 * 5 in = 36 in

Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:

Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²

Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²

Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²

The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:

Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²

Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²

Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:

Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²

Converting to yards and rounding to two decimal places, we get:

Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)

Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.

The y-intercept of a function represents the value of the function when the input is equal to zero.

The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).

Here we have

A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:

=> f(d) = 7(1.06)^d

Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29  

=> 13.29 = [tex]7(1.06)^{d}[/tex]

=> ln(13.29/7) = d ln(1.06)

=> d = ln(13.29/7)/ln(1.06) ≈ 11  

Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.

Substituting d = 0 into the given equation, we get:

f(0) = 7(1.06)⁰ = 7

Therefore, The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):

f(4) = 7(1.06)⁴ ≈ 8.84

f(11) = 7(1.06)¹¹ ≈ 13.29

The slope of the second line passing through these two points is:

Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64

Therefore,

The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

Learn more about Functions at

https://brainly.com/question/24839787

#SPJ1

The range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.

what is statistics?

Statistics is a branch of mathematics that deals with collecting, analyzing, interpreting, presenting, and organizing data. It involves the study of methods for designing experiments and surveys, analyzing and interpreting data, and making decisions based on data. Statistics plays an important role in a wide range of fields, including science, social science, economics, finance, engineering, and many others. It is used to draw conclusions, make predictions, and inform decision-making by providing a quantitative and objective approach to understanding and analyzing data.

The most accurate measure of variability to use for this data set is the range of 49. The range is the difference between the highest and lowest values in the data set, which in this case is 59 - 10 = 49. The range provides a simple and straightforward measure of the spread of the data and is useful when the data is not too skewed.

While the data in this set is skewed, the range is still an appropriate measure of variability because there are no extreme outliers that would significantly affect the range. The IQR (interquartile range) is another measure of variability that is useful for skewed data, but in this case, it would not be the most appropriate choice because the data set is not divided into quartiles and the IQR would not provide additional information beyond what the range already shows.

Therefore, the range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.

To learn more about statistics from the given link

https://brainly.com/question/29093686

#SPJ1

The volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]

The volume of a rectangular prism is given by the formula V = lwh, where l is the length, w is the width, and h is the height.

In this case, the length is 5 yards, the width is 5 yards, and the height is 3 and 1/2 yards. We can convert the height to a mixed number fraction of 7/2 yards.

Therefore, the volume of the prism is:

V = lwh = 5 yards × 5 yards × 7/2 yards = 87.5 cubic yards

So, the volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]

to know more about volume

brainly.com/question/1578538

#SPJ1

Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.

Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.

For more information about data classification, visit :

https://brainly.com/question/30580761

#SPJ4

The surface area of the two solids are listed below:

Case 1 - 232 square centimeters

Case 2 - 240 square centimeters

The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:

Triangle

A = 0.5 · b · h

Rectangle

A = b · h

Case 1

A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)

A = 232 cm²

Case 2

A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)

A = 24 cm² + 96 cm² + 120 cm²

A = 240 cm²

To learn more on surface areas of solids: https://brainly.com/question/31126484

#SPJ1

According to the algebraic expressions, the sum of four smaller rectangles is 96.

First, let's consider the figure as one large rectangle. To find the area of a rectangle, we multiply its length by its width. In this case, the length of the rectangle is 8 and the width is 6 + 2 + 4 = 12. Therefore, the expression for the area of the rectangle can be written as:

Area = length x width

Area = 8 x 12

Area = 96

So the area of the figure as one large rectangle is 96 square units.

To find the area of each rectangle, we'll use the formula for the area of a rectangle, which is length x width. We can see from the figure that:

Rectangle A has a length of 8 and a width of 6

Rectangle B has a length of 8 and a width of 2

Rectangle C has a length of 4 and a width of 6

Rectangle D has a length of 4 and a width of 2

Therefore, the expressions for the area of each rectangle can be written as:

Area_A = length x width

Area_A = 8 x 6

Area_A = 48

Area_B = length x width

Area_B = 8 x 2

Area_B = 16

Area_C = length x width

Area_C = 4 x 6

Area_C = 24

Area_D = length x width

Area_D = 4 x 2

Area_D = 8

To find the total area of the figure, we simply add up the areas of the four rectangles. Therefore, the expression for the area of the figure as a sum of four smaller rectangles can be written as:

Area = Area_A + Area_B + Area_C + Area_D

Area = 48 + 16 + 24 + 8

Area = 96

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

Answer:

m = 6

Step-by-step explanation:

We have the proportion:

12/m = 18/9

To solve for m, we can cross-multiply the terms in the proportion:

12 × 9 = 18 × m

Simplifying both sides of the equation, we get:

108 = 18m

Dividing both sides by 18, we get:m = 6

Therefore, the solution to the proportion 12/m = 18/9 is m = 6.

Answer: m = 6

Step-by-step explanation:

First, we will rewrite this proportion:

     [tex]\displaystyle \frac{12}{m} =\frac{18}{9}[/tex]

Next, we will cross-multiply:

     12 * 9 = 18 * m

     108 = 18m

Lastly, we will divide both sides of the equation by 18:

     m = 6

We can also solve this proportion another way.

     We know that 18/9 = 2, so 12/m must equal 2 as well.

     12/6 = 2, so m = 6.

The required sample size is  8.90400.

Given a student wants to make a guess within 0.03 of the true ratio with a 90% confidence level.

Margin of Error, E = 0.03

significance level α=0.10  {90% confidence}

A given estimate of the percentage of population p is p = 0.79.

The critical value for the significance level α = 0.10 is Zc = 1.645. This can be determined using either Excel or a normal probability table.

Use the following formula to calculate the minimum sample size required to estimate the percentage of population p within the required margin of error.

n≥p(1-p)(Zc÷E)²

n = 0.796×(1-0.796)(1.645÷0.03)²

n = 0.796 x 0.204 x 54.833

n = 8.90400

Therefore, the resample size required to meet the condition is n ≥  8.90400 and must be an integer. From this, we conclude that the minimum sample size required is n =  8.90400

Lear more about confidence level here :-

https://brainly.com/question/22851322

#SPJ4

The volume of the pyramid is approximately 574,533.33 cubic meters.

To find the volume of a pyramid, you use the formula: V = (1/3) × base area × height, where B is the area of the base and h is the height of the pyramid.

Given that the side length of the square base is 140 m and the height is 91 m.

Since the base of the pyramid is a square with a side length of 140 m, we can find its area by multiplying the side lengths: B = 140m x 140m = 19,600 square meters.
By calculating this expression, you'll find the volume of the pyramid.

Now we can plug in the values for B and h into the formula: V = (1/3)(19,600 square meters)(91 meters) = 574,533.33 cubic meters.

To learn more about volume visit;

brainly.com/question/16788902

#SPJ11

Therefore, the area of the regular dodecagon with a side length of 8 units is approximately 1,843.21 square units.

In mathematics, area refers to the measure of the amount of space inside a two-dimensional shape or region. It is a measure of the size of a flat surface, and is typically expressed in square units, such as square meters (m²), square centimeters (cm²), or square feet (ft²). The area of a shape can be calculated using various formulas, depending on the type of shape. The concept of area is used in many areas of science and engineering, including physics, geometry, and architecture. It is particularly important in fields such as construction and landscaping, where the amount of material needed to cover a given area is often a key factor in planning and budgeting.

Here,

To find the area of a regular dodecagon, you can use the formula:

Area = (3 * √3 / 2) * s² * n

where s is the length of each side and n is the number of sides.

Substituting s = 8 and n = 12, we get:

Area = (3 * √3 / 2) * 8² * 12

Area = 3 * √3 * 64 * 12

Area = 1,843.21 square units (rounded to two decimal places)

To know more area,

https://brainly.com/question/30106292

#SPJ1

The surface area of the rectangular pyramid is approximately 567.9 in².

What is rectangular pyramid?

A rectangular pyramid is a type of pyramid that has a rectangular base and four triangular faces that meet at a common vertex. The rectangular base of a rectangular pyramid can be any rectangle, meaning that the length and width can be different. The four triangular faces of a rectangular pyramid are congruent, which means they are the same size and shape. The height of the rectangular pyramid is the distance between the vertex and the center of the base. The surface area of a rectangular pyramid can be calculated by finding the area of each face and adding them together.

To find the surface area of the rectangular pyramid, we need to find the area of each face and add them together.

First, let's find the area of the rectangular base:

Area of base = length x width = 13 in x 17 in = 221 in²

Next, let's find the area of the larger triangular faces:

Area of each larger triangular face = (1/2) x base x height = (1/2) x 17 in x 11 in = 93.5 in²

Total area of both larger triangular faces = 2 x 93.5 in² = 187 in²

Finally, let's find the area of the smaller triangular face:

Area of smaller triangular face = (1/2) x base x height = (1/2) x 13 in x 12.3 in = 79.95 in²

Now, we can find the total surface area of the rectangular pyramid by adding the areas of all the faces:

Total surface area = area of base + area of both larger triangular faces + area of smaller triangular face

Total surface area = 221 in² + 187 in² + 79.95 in²

Total surface area = 488.95 in²

Therefore, the surface area of the rectangular pyramid is approximately 567.9 in².

To know more about rectangular pyramid visit:

https://brainly.com/question/27270944

#SPJ1

Answer:

Step-by-step explanation:= x+48=180 ( linier pair )

                                            = x=180-48

                                            = x=132

                                              = x+12=180 (liner pair)

                                              = x=180-12

                                              = x=168

Answer:

x ≈ 39.5°

Step-by-step explanation:

using the cosine ratio in the right triangle

cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then

x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )

The probability of the sample mean being less than 79 is 77.64%

In order to solve the given problem we have to take the help of Standard error mean

SEM = ∑/√(n)

here,

∑ = population standard deviation

n = sample size

hence, the z-score can be calculated as

z = ( x' - μ)/σ/√(n)

here,

x' = sample mean

μ = population mean

σ = population standard deviation

n = sample size

adding the values into the formula

SEM = σ / √(n)

= 21/√64

= 2.625

z = (x' - μ)/SEM

= (79-77)/2.625

= 0.76

now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage

0.77 x 100

= 77%

The probability of the sample mean being less than 79 is 77.64%

To learn more about probability,

https://brainly.com/question/13604758

#SPJ4

Answer:

The answer is 28

Step-by-step explanation:

sin0=opp/hyp

let hyp be x

sin30=14/x

0.5x=14

divide both sides by 0.6

x=14/0.5

x=28

Answer:

$525

Step-by-step explanation:

Jackie starts with $500, and the interest rate is 5% per year.

This means that, after one year, Jackie will have accumulated 5% interest with the $500 she put into the savings account.

Now, we can find 5% of $500 by converting 5% to its fraction form, which is 5/100. 5% of a value means that you need to multiply the fraction (or decimal) by the said value. So, we have:

[tex]\frac{5}{100}[/tex] · 500 =

[tex]\frac{2500}{100}[/tex] =

25

Therefore, the amount of interest she has accumulated in one year is $25. Combined with the money in her savings account, she has $525, since $500 + $25 = $525.

The value of AC to the nearest tenth is 29.5

The sine rule states that if a, b and c are the lengths of the sides of a triangle, and A, B and C are the angles in the triangle; with A opposite a, etc., then a/sinA=b/sinB=c/sinC.

Angle B = 180-(33+58)

= 180-91 = 89°

using sine rule

represent AC by x

x/ sin89 = 25/sin 58

xsin58 = 25sin89

0.848x = 0.9998×25

0.848x = 24.995

x = 24.995/0.848

x = 29.5( nearest tenth)

therefore the value of AC is 29.5.

learn more about sine rule from

https://brainly.com/question/20839703

#SPJ1

Testing is only one part of the overall assessment process.

What is evaluation in education?

Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).

What is an assessment? Also what does it mean?

At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”. 

Learn more about assessment

brainly.com/question/28046286

#SPJ1