Iron(II) is available to bond with chloride ion. How many of each type of ion will bond to form an ionic compound?

A) 3 iron(II), 1 chloride

B) 2 iron(II), 3 chloride

C) 2 iron(II), 1 chloride

D) 1 iron(II), 2 chloride

Answer:

Approximately [tex]1.854\; \rm mol\cdot L^{-1}[/tex].

Explanation:

Note that both figures in the question come with four significant figures. Therefore, the answer should also be rounded to four significant figures. Intermediate results should have more significant figures than that.

Look up the relative atomic mass of [tex]\rm Sr[/tex], [tex]\rm O[/tex], and [tex]\rm H[/tex] on a modern periodic table. Keep at least four significant figures in each of these atomic mass data.

Calculate the formula mass of [tex]\rm Sr(OH)_2[/tex]:

[tex]M\left(\rm Sr(OH)_2\right) = 87.62 + 2\times (15.999 + 1.008) = 121.634\; \rm g \cdot mol^{-1}[/tex].

[tex]M\left(\rm Sr(OH)_2\right) =121.634\; \rm g \cdot mol^{-1}[/tex] means that each mole of [tex]\rm Sr(OH)_2[/tex] formula units have a mass of [tex]121.634\; \rm g[/tex].

The question states that there are [tex]10.60\; \rm g[/tex] of [tex]\rm Sr(OH)_2[/tex] in this solution.

How many moles of [tex]\rm Sr(OH)_2[/tex] formula units would that be?

[tex]\begin{aligned}n\left(\rm Sr(OH)_2\right) &= \frac{m\left(\rm Sr(OH)_2\right)}{M\left(\rm Sr(OH)_2\right)}\\ &= \frac{10.60\; \rm g}{121.634\; \rm g \cdot mol^{-1}} \approx 8.71467\times 10^{-2}\; \rm mol\end{aligned}[/tex].

There are [tex]8.71467\times 10^{-2}\; \rm mol[/tex] of [tex]\rm Sr(OH)_2[/tex] formula units in this [tex]47\; \rm mL[/tex] solution. Convert the unit of volume to liter:

[tex]V = 47\; \rm mL = 0.047\; \rm L[/tex].

The molarity of a solution measures its molar concentration. For this solution:

[tex]\begin{aligned}c\left(\rm Sr(OH)_2\right) &= \frac{n\left(\rm Sr(OH)_2\right)}{V}\\ &= \frac{8.71467\times 10^{-2}\; \rm mol}{0.047\; \rm L} \approx 1.854\; \rm mol \cdot L^{-1}\end{aligned}[/tex].

(Rounded to four significant figures.)

The given question is incomplete. The complete question is :

Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?​

a) [tex]O^{2-}[/tex]

b)  [tex]F^{-}[/tex]

c)  [tex]N^{3-}[/tex]

d)  [tex]S^{2-}[/tex]

Answer: b)  [tex]F^{-}[/tex]

Explanation:

For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.  

Here potassium is having an oxidation state of +1 called as  cation and thus is an anion must have an oxidation state of -1 if they have to combine in 1: 1 ratio to  give neutral ionic compound.

Thus the anion has to be [tex]F^-[/tex] which combines with [tex]K^+[/tex] in 1: 1 ratio to give [tex]KF[/tex]

Answer:

Strontium is smaller

Strontium has the higher ionization energy

Strontium has more valence electrons

Explanation:

It must be understood that both elements belong to the same period i.e the same horizontal band of the periodic table

While Rubidium is an alkali metal(group 1) while Strontium is an alkali earth metal(group 2)

Since they are in the same period, periodic trends would be useful in evaluating their properties

In terms of atomic radius, rubidium is larger meaning it has a bigger atomic size

Generally, across the periodic table, atomic radius is expected to decrease and thus Rubidium which is leftmost is expected to have the higher atomic radius

Since strontium belongs to group 2 of the periodic table, it has 2 valence electrons which is more than the single valence electron that rubidium which is in group 1 has

In terms of ionization energy, the atom with the higher number of valence electrons will have the higher ionization energy which is strontium in this case

Answer:

Explanation:

a ) Benzoic acid is formed . In any alkyl benzene derivative , potassium permanganate reacts to form carboxylic acid . It oxidises side chains to carboxylic acid .  

C₆H₅CH₃ + 0 = C₆H₅COOH + H₂O

O is provided by KMnO₄

b ) In this reaction isophthalic acid is formed .

C₆H₄(CH₃)₂ +O = C₆H₄(COOH)₂

c)

4-Propyl-3-t-butyltoluene

In this oxidation , three side chains of ring  are 1 ) 1-methyl 2 ) 3- butyl 3 ) 4 propyl .

The methyl and 4 - propyl groups are oxidised to di- carboxylic acid and 3 butyl group remains intact ( unoxidised )

Answer:

Isomers are molecules that have the same molecular method, however have a unique association of the atoms in space. That excludes any extraordinary preparations which can be sincerely because of the molecule rotating as an entire, or rotating about precise bonds.

Answer:

C

Explanation:

Turning liquid to a solid is like freezing water to ice and requires the water to LOSE (release) heat causing an exothermic reaction.

Answer:

The correct answer is 2.75 grams of HCl.

Explanation:

The given balanced equation is:  

CaCO₃ (s) + 2HCl (aq) ⇒ CaCl₂ (aq) + H₂O (l) + CO₂ (g)

Based on the given information, one mole of calcium carbonate is reacting with two moles of HCl. The molecular mass of HCl is 36.5 grams, thus, the mass of 2 moles of HCl will be, 36.5 × 2 = 73 grams

The molecular mass of CaCO₃ is 100 gram per mole, that is, the mass of 1 mole of CaCO₃ is 100 grams, therefore, the mass of HCl required for reacting with 3.75 grams of CaCO₃ will be,  

= 3.75 × 2 × 36.5 / 100 = 2.74 grams of HCl.  

Answer:

[tex]pKa=3.70[/tex]

Explanation:

Hello,

In this case, given the information, we can compute the concentration of hydronium given the pH:

[tex]pH=-log([H^+])\\[/tex]

[tex][H^+]=10^{-pH}=10^{-2.18}=6.61x10^{-3}M[/tex]

Next, given the concentration of the acid and due to the fact it is monoprotic, its dissociation should be:

[tex]HA\rightleftharpoons H^++A^-[/tex]

We can write the law of mass action for equilibrium:

[tex]Ka=\frac{[H^+][A^-]}{[HA]}[/tex]

Thus, due to the stoichiometry, the concentration of hydronium and A⁻ are the same at equilibrium and the concentration of acid is:

[tex][HA]=0.2230M-6.61x10^{-3}M=0.2164M[/tex]

As the concentration of hydronium also equals the reaction extent ([tex]x[/tex]). Thereby, the acid dissociation constant turns out:

[tex]Ka=\frac{(6.61x10^{-3})^2}{0.2164}\\ \\Ka=2.02x10^{-4}[/tex]

And the pKa:

[tex]pKa=-log(Ka)=-log(2.02x10^{-4})\\\\pKa=3.70[/tex]

Regards.

Answer:

[tex]Kp=0.0386[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]2NO+O_2\rightleftharpoons 2NO_2[/tex]

For which the equilibrium expression is:

[tex]Kp=\frac{p_{NO_2}^2}{p_{NO}^2p_{O_2}}[/tex]

Whereas, at equilibrium, each pressure is computed in terms of the initial pressure and the reaction extent via:

[tex]p_{NO_2}=2x\\p_{NO}=522-2x\\p_{O_2}=421-x[/tex]

And the total pressure:

[tex]p_{eq}=p_{NO_2}+p_{NO}+p_{O_2}\\\\p_{eq}=2x+522-2x+421-x\\\\p_{eq}=943-x[/tex]

Yet it is 748 torr, for which the extent is:

[tex]x=943-p_{eq}=943-748\\\\x=195torr[/tex]

Therefore, Kp turns out:

[tex]Kp=\frac{(2x)^2}{(522-2x)^2(421-x)}\\\\Kp=\frac{(2*195)^2}{(522-2*195)^2(421-195)}\\\\Kp=0.0386[/tex]

Best regards.

Answer:

Hydroxyl

Explanation:

A hydroxyl group is a functional group that attaches to some molecules containing an oxygen and hydrogen atom, bonded together. Also spelled hydroxy, this functional group provides important functions to both alcohols and carboxylic acids.

The functional groups are the part of the organic chemistry that confers the characteristic feature of a molecule. The molecule has a hydroxyl group in its structure. Thus, option C is correct.

Hydroxyl functional groups are the atoms or molecules that provide a distinctive property to a compound. It has a chemical formula of -OH that has oxygen covalently bonded to the hydrogen atom.

The hydroxyl group is called the alcohol group that is seen in methanol, ethanol, propanol, etc. The presence of hydrogen allows the compound to form a water bond with other molecules and makes them soluble and polar.

Therefore, option C. the molecule has a hydroxyl or alcoholic functional group attached to its carbon atom.

Learn more about the hydroxyl functional group here:

https://brainly.com/question/4682253

#SPJ5

Answer:

Do not conduct electricity as solids.

Explanation:

Hello,

In this case, we should remember that salts are formed when an acid and base react in order to yield the salt and water due to the ions exchange during neutralization chemical reactions. For instance, when hydrochloric acid  (acid) reacts with potassium hydroxide (base), sodium chloride (salt) and water are yielded via:

[tex]HCl+NaOH\rightarrow NaCl+H_2O[/tex]

Moreover, it is widely known that salts are formed by electrovalent/ionic bonds which involves electron transfer so the metallic atom becomes positively charged (cation) whereas the non-metallic atom becomes negatively charged (anion) once the electrons are received so it can conduct electricity when dissolved in water yet not when solid since electron transfer is facilitated by the aqueous media, otherwise, ions remain together. Thereby, answer is do not conduct electricity as solids.

Regards.

Answer:

c

Explanation:

Radiologists are medical doctors that treat injuries using medical imaging (radiology)

Answer:

a person who uses X-rays or other high-energy radiation, especially a doctor specializing in radiology.

Explanation:

Answer:

Ionic Crystal

Explanation:

Answer:

An addiction could occur, maybe an overdose?, this could lead to death and maybe you would do unreasonable things which could get you fined or arrested.

Explanation:

Answer:

Hope this helped,

Kavitha

Answer:

Water

Explanation:

Solid potassium hydrogen tartrates (KHT) is soluble in water. This is especially at room temperature.

The solvent for KHT is water.

Answer:

[tex]\rm Cl_2 + 2\; KBr \to Br_2 + 2\; KCl[/tex].

One chlorine molecule reacts with two formula units of (aqueous) potassium bromide to produce one bromine molecule and two formula units of (aqueous) potassium chloride.

Explanation:

Start by finding the formula for each of the compound.

Therefore, the ratio between [tex]\rm K[/tex] atoms and [tex]\rm Br[/tex] atoms in potassium bromide is supposed to be one-to-one. That corresponds to the empirical formula [tex]\rm KBr[/tex]. Similarly, the ratio between

The formula for chlorine gas is [tex]\rm Cl_2[/tex], while the formula for bromine gas is [tex]\rm Br_2[/tex].

Write down the equation using these chemical formulas.

[tex]\rm ?\; Cl_2 + ?\; KBr \to ?\;Br_2 + ?\; KCl[/tex].

Start by assuming that the coefficient of compound with the largest number of elements is one. In this particular equation, both [tex]\rm KBr[/tex] and [tex]\rm KCl[/tex] features two elements each.

Assume that the coefficient of [tex]\rm KCl[/tex] is one. Hence:

[tex]\rm ?\; Cl_2 + 1 \; KBr \to ?\;Br_2 + ?\; KCl[/tex].

Note that [tex]\rm KBr[/tex] is the only source of [tex]\rm K[/tex] and [tex]\rm Br[/tex] atoms among the reactants of this reaction.

There would thus be one [tex]\rm K[/tex] atom and one [tex]\rm Br[/tex] atom on the reactant side of the equation.

Because atoms are conserved in a chemical equation, there should be the same number of [tex]\rm K[/tex] and [tex]\rm Br[/tex] atoms on the product side of the equation.

In this reaction, [tex]\rm Br_2[/tex] is the only product with [tex]\rm Br[/tex] atoms.

One [tex]\rm Br[/tex] atom would correspond to [tex]0.5[/tex] units of [tex]\rm Br_2[/tex].

Similarly, in this reaction, [tex]\rm KCl[/tex] is the only product with [tex]\rm K[/tex] atoms.

One [tex]\rm K[/tex] atom would correspond to one formula unit of [tex]\rm KCl[/tex].

Hence:

[tex]\displaystyle \rm ?\; Cl_2 + 1 \; KBr \to \frac{1}{2}\;Br_2 + 1\; KCl[/tex].

Similarly, there should be exactly one [tex]\rm Cl[/tex] atom on either side of this equation. The coefficient of [tex]\rm Cl_2[/tex] should thus be [tex]0.5[/tex]. Hence:

[tex]\displaystyle \rm \frac{1}{2}\; Cl_2 + 1 \; KBr \to \frac{1}{2}\;Br_2 + 1\; KCl[/tex].

That does not meet the requirements, because two of these coefficients are not integers. Multiply all these coefficients by two (the least common multiple- LCM- of these two denominators) to obtain:

[tex]\displaystyle \rm 1\; Cl_2 + 2 \; KBr \to 1\;Br_2 + 2\; KCl[/tex].

Answer:

Molarity of the sulfuric acid solution is 4.61M

Explanation:

The neutralization of a base of OH⁻ with sulfuric acid, H₂SO₄, occurs as follows:

2 OH⁻ + H₂SO₄ → 2H₂O + SO₄²⁻

That means, 2 moles of base react with 1 mole of sulfuric acid.

If you add 0.400 moles of OH⁻, moles of sulfuric acid you need to neutralize this amount of OH⁻ are:

0.400 moles OH⁻ ₓ (1 mole H₂SO₄ / 2 moles OH⁻) = 0.200 moles of H₂SO₄

As you add 43.4mL = 0.0434L of sulfuric acid to neutralize this solution, molarity (Ratio between moles and liters) is:

0.200 moles H₂SO₄ / 0.0434L = 4.61M

Answer:

171 mL of HCl

Explanation:

The first thing we want to do is consider the reaction between Al(OH)3 and water - as that is the expected reaction that is taking place,

Al(OH)3 + 3HCl → AlCl3 + 3H2O

Knowing this, let's identify the mass of Al(OH)3. Aluminum = 27 g / mol, Oxygen( 3 ) = 16 [tex]*[/tex] 3 = 48, Hydrogen ( 3 ) = 1 [tex]*[/tex] 3 = 3 - 27 + 48 + 3 = 78 g / mol. This value is approximated however ( 78 g / mol ), as the molar mass of each substance is rounded as well. Another key thing we need to do here is to convert 340 mg → grams, considering that that unit is a necessity with respect to moles, as you might know - 340 mg = 0.340 g.

Now we can calculate how much moles of HCl will be present in solution, provided we have sufficient information for that,

(0.340 g Al(OH)3) / (78.0036 g / mol Al(OH)3) [tex]*[/tex] (3 mol HCl / 1 mol Al(OH)3)

⇒ (.004358773185 g^2 / mol Al(OH)3) [tex]*[/tex] (3 HCl / Al(OH)3 )

⇒ .01307632 mol HCl

We can apply this same concept on the reaction of Mg(OH)2 and water, receiving the number of moles of HCl when that takes place. Then we can add the two ( moles of HCl ) and divide by the value " 0.18 mol / L " given to us.

" Mg(OH)2 + 2HCl → MgCl2 + 2H2O "

Molar mass of Mg(OH)2 = 58.3197 g / mol,

516 mg = 0.516 g

(0.516 g Mg(OH)2) / (58.3197 g / mol Mg(OH)2) [tex]*[/tex] (2 mol HCl / 1 mol Mg(OH)2)

= .017695564 mol HCL

___________

( .01307632 + .017695564 ) / ( 0.18 M HCl )

= 0.170954911 L

= 171 mL of HCl

Answer:

The Empirical Formular is given as; Ti₆Al₄V

Explanation:

The percent composition of the material is 64.39% titanium, 24.19% aluminum, and 11.42% vanadium.

Elements                        Titanium            Aluminium        Vanadium

Percentage                    64.39                 24.19                   11.42

Divide all through by their molar mass

                                     64.39 / 47.87      24.19 / 27               11.42 / 50.94

                                       =  1.345                = 0.896                 = 0.224

Divide all though  by the smallest number (0.224)

                                     1.345 / 0.224        0.896 / 0.224       0.224 / 0.224

                                     = 6                         = 4                             = 1

The Empirical Formular is given as; Ti₆Al₄V

Using the stepwise procedure for obtaining the empirical formula of a compound, the empirical formula is [tex] T_{6}Al_{4}V[/tex]

Titanium :

Divide by Molar mass : = 64.39/47.87 = 1.345

Aluminum :

Divide by Molar mass : = 24.19/27 = 0.896

Vanadium :

Divide by Molar mass : = 11.42/50.94 = 0.224

Divide by the smallest :

Titanium = 1.345 / 0.224 = 6.00

Aluminum = 0.896 / 0.224 = 4

Vanadium = 0.224 / 0.224 = 1

Hence, the empirical formula is [tex] T_{6}Al_{4}V[/tex]

Learn more : https://brainly.com/question/17091379

Answer:

Your answer will either be 22.9897 or 22.990 !!

Explanation:

Answer:

Bleaching Powder's chemical formula is CaOCl2 and is called Calcium Oxychloride. It is prepared on dry slaked lime by chlorine gas. 2. ... It gives calcium chloride, chlorine and water when bleaching powder reacts with hydrochloric acid.

Explanation:

Answer:

Molecular compounds are inorganic compounds that take the form of discrete (covalent) molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2).

Answer:

Rubidium

Explanation:

Answer:

Explanation:

CH₃COOH + NaOH = CH₃COONa + H₂O .

.02M

CH₃COOH  = CH₃COO⁻ + H⁺

C                       xC             xC

Ka = xC . xC / C = x² C

1.8 x 10⁻⁵ = x² . .02

x² = 9 x 10⁻⁴

x = 3 x 10⁻²

= .03

concentration of H⁺ = xC = .03 . .02

= 6 x 10⁻⁴ M , volume =  45 x 10⁻³ L

moles of H⁺  = 6 X 10⁻⁴  x 45 x 10⁻³

= 270 x 10⁻⁷ moles

= 2.7 x 10⁻⁵ moles

concentration of NaOH = .0200 M , volume = 35 x 10⁻³ L

moles of Na OH = 2 X 10⁻²  x 35 x 10⁻³

= 70 x 10⁻⁵ moles

=  

NaOH is a strong base so it will dissociate fully .

there will be neutralisation reaction between the two .

Net NaOH remaining = (70 - 2.7 ) x 10⁻⁵ moles

= 67.3 x 10⁻⁵ moles of NaOH

Total volume = 45 + 35 = 80 x 10⁻³

concentration of NaOH after neutralisation.= 67.3  x 10⁻⁵ / 80 x 10⁻³ moles / L

= 8.4125  x 10⁻³ moles / L

OH⁻ = 8.4125  x 10⁻³

H⁺ = 10⁻¹⁴ / 8.4125  x 10⁻³

= 1.1887 x 10⁻¹²

pH = - log (  1.1887 x 10⁻¹² )

= 12 - log 1.1887

= 12 - .075

= 11.925 .

Answer:

1) positive

2) carbocation

3) most stable

4) faster

Explanation:

A common test for the presence of alcohols can be achieved using the Lucas reagent. Lucas reagent is a mixture of concentrated hydrochloric acid and zinc chloride.

The reaction of Lucas reagent reacts with alcohols leading to the formation of an alkyl chloride. Since the reaction proceeds via a carbocation mechanism, tertiary alcohols give an immediate reaction. Once a tertiary alcohol is mixed with Lucas reagent, the solution turns cloudy almost immediately indicating an instant positive reaction.

Secondary alcohols may turn cloudy within five minutes of mixing the solutions. Primary alcohols do not significantly react with Lucas reagent obviously because they do not form stable carbocations.

Therefore we can use the Lucas reagent to distinguish between primary, secondary and tertiary alcohols.

Answer:

Hey there!

That would be the alkaline earth metals.

Hope this helps :)

Answer: alkaline earth metals

Explanation:

Answer:

(a) The diode voltage,  [tex]V_D =[/tex]  0.776 V

(b) The diode current, [tex]I_D =[/tex] 3.81 x 10⁻²⁰ A

Explanation:

Given;

saturation current in diode, [tex]I_s[/tex] = 10⁻¹⁷ A

nonideality factor, n = 1.05

(a) the diode voltage

Given diode current, [tex]I_D[/tex] = 70 μA = 7 x 10⁻⁶ A

Diode voltage is calculated as;

[tex]V_D = nV_Tln(1+ \frac{I_D}{I_S} )[/tex]

Where;

[tex]V_T[/tex] is thermal voltage at 25°C = 0.025

[tex]V_D = 1.05 * 0.025 ln(1+ \frac{70*10^{-6}}{1*10^{-17}})\\\\V_D = 0.02625ln(1+ 7*10^{12})\\\\V_D = 0.776 \ V[/tex]

b) the diode current for VD = 0.1 mV

[tex]V_D = nV_Tln(1 +\frac{I_D}{I_S} )\\\\ln(1 +\frac{I_D}{I_S} ) = \frac{V_D}{nV_T} \\\\ln(1 +\frac{I_D}{I_S} ) = \frac{0.1*10^{-3}}{1.05*0.025} \\\\ln(1 +\frac{I_D}{I_S} ) = 0.00381\\\\1 +\frac{I_D}{I_S} = e^{0.00381}\\\\1+ \frac{I_D}{I_S}= 1.00381\\\\ \frac{I_D}{I_S}=1.00381 - 1\\\\ \frac{I_D}{I_S}= 0.00381\\\\I_D = 0.00381(I_S)\\\\I_D = 0.00381(10^{-17})\\\\I_D = 3.81*10^{-20} \ A[/tex]

Answer:

1.3 mL

Explanation:

First, get the density of the olive oil, which is 0.917 kg/mL. Then divide the mass by the density:

1.2kg/0.917kg/mL= 1.3086150491 mL. The kg cancel out, leaving us with mL.

It should have 2 significant figures, because 1.2kg has 2 and we are dividing.

The volume of olive oil will be nearly 1300mL or 1.30 L as per the given data.

Volume is a measurement of three-dimensional space that is occupied. It is frequently numerically quantified using SI derived units or various imperial units. The definition of length is linked to the definition of volume.

Volume is, at its most basic, a measure of space. The units liters (L) and milliliters (mL) are used to measure the volume of a liquid, also known as capacity.

This measurement is done with graduated cylinders, beakers, and Erlenmeyer flasks.

Here, it is given that mass of olive oil is 1.2kg.

We know that,

Density of olive oil = 0.917kg/l.

Volume = mass/density

Volume = 1.2/0.917.

Volume = 1.30 lit.

Volume = 1300mL.

Thus, the volume of olive oil will be 1300 mL.

For more details regarding volume, visit:

https://brainly.com/question/1578538

#SPJ2