Is a diamond a homogeneous or heterogeneous mixture or a substance

Answer:

its natural gas because i had something like this

Explanation:

The renewable energy sources, such as biomass, geothermal resources, water, wind, etc. are called the natural resources. These can be converted into clean and usable energy. The correct option is D.

The energy which is derived from the natural sources which are replenished at a higher rate than they are consumed is defined as the Renewable energy. The renewable energy generating produce lower emissions than burning the fossil fuels.

The word biomass refers to the organic plant matter which is converted into fuel and used as an energy source. The biomass fuel is considered as an important renewable and sustainable source of energy. It is used for the production of electricity.

The organic materials like wood, agricultural wastes, etc. acts as the excellent sources to produce biomass fuel. It is possible to burn the biomass fuel directly and later converted into methane and ethanol biofuels.

Thus the correct option is D.

To know more about renewable energy, visit;

https://brainly.com/question/13258101

#SPJ7

Answer:

Organisms and humans depend on each other to get by. Environmental science is important because it enables you to understand how these relationships work.

For example, humans breathe out carbon dioxide, which plants need for photosynthesis. Plants, on the other hand, produce and release oxygen to the atmosphere, which humans need for respiration.

Animal droppings are sources of nutrients for plants and other microorganisms. Plants are sources of food for humans and animals. In short, organisms and humans depend on each other for survival.

Explanation:

Answer:

6.02 × 10²³ atoms Cl₂

Explanation:

Avagadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.

Step 1: Define

1.00 mol Cl₂ (g)

Step 2: Use Dimensional Analysis

[tex]1.00 \hspace{3} mol \hspace{3} Cl_2(\frac{6.02(10)^23 \hspace{3} atoms \hspace{3} Cl_2}{1 \hspace{3} mol \hspace{3} Cl_2} )[/tex] = 6.02 × 10²³ atoms Cl₂

Answer:

The answer is D - Atom

The smallest unit of an element that can exist either alone or in combination with other such particles of the same or different elements is the atom.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

Answer:

D - Nucleus to Cell

Explanation:

Hope it helps!!

:D

Answer:

The equilibrium concentration of [CH₃NH₂] = 0.23965 M.

The equilibrium concentration of CH₃NH₃⁺ and  OH⁻ =  0.01035 M respectively.

Explanation:

The first step is to write out the dissociation reaction. Therefore, the equation showing the dissociation is given as below;

CH₃NH₂ + H₂0   <--------------------------------------------------------> CH₃NH₃⁺ + OH⁻.

Kindly note that ''<----------->'' arrow shows that the reaction is an equilibrium reaction.

Therefore, at the start of the reaction [that is time, t =0], we have that the concentration of CH₃NH₂ = 0.25M, thus, the concentration of CH₃NH₃⁺  and  OH⁻ is zero respectively at this time, t =0.

At equilibrium, the concentration of CH₃NH₂ = 0.25M - x, thus, the concentration of CH₃NH₃⁺  and  OH⁻ is x respectively.

Therefore, kb =  4.47 × 10-4 = [CH₃NH₃⁺ ][OH⁻]/[CH₃NH₂].  Hence, slotting in the values into this equilibrium equation showing the relationship between kb and concentration of the species involved, we have that;

kb = 4.47 × 10⁻⁴ = x² /0.25 - x.

x² +  4.47 × 10⁻⁴x - 1.1175  × 10⁻⁴ = 0.

Solving this quadratic equation gives us the value of x as 0.01035 M.

Thus, the concentration of [CH₃NH₂] = 0.25 M - 0.01035 M = 0.23965 M

The equilibrium concentration of [CH₃NH₂] = 0.23965 M.

The equilibrium concentration of CH₃NH₃⁺ and  OH⁻ =  0.01035 M respectively.

Answer:

Linear molecule with two domains

Explanation:

Answer:

Salinity, along with temperature, determines the density of seawater, and hence its vertical flow patterns in thermohaline circulation. 2. Salinity records the physical processes affecting a water mass when it was last at the surface. Hope this helps!

Explanation:

Explanation:

Preciptation and air pressure

Answer:

It is Temperature and humidity. C

Explanation:

I took the test and it said it was C

Answer: a) A decrease in the solubility of an ionic compound as a result of the addition of a common ion : Common ion effect

b) The mass of a salt in grams that will dissolve in 100 mL of water: Solubility

c) A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved: Saturated solution

d) The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation : Solubility product constant

e) The maximum number of moles of a salt that will dissolve in 1 L of solution : Molar solubility

Explanation:

Solubility is expressed usually as the mass of solute per 100 grams or 100 ml of solvent.

Molar solubility of a solid is expressed as the concentration of the dissolved solid in a saturated solution.

Solubility product constant is defined as the equilibrium constant in which a solid ionic compound is dissolved to produce its ions in solution. It is represented as [tex]K_{sp}[/tex]

The common-ion effect is the decrease in solubility of a sparingly soluble salt by the addition to the solution of a soluble compound with an ion in common with the precipitate.

Saturated solution is defined as the solution in which no more solute particles can be dissolved in the solvent.

Answer:

1) No

2) The solvent contaminated the analyte

3) The solvent should be evaporated properly before washing and drying the analyte

Explanation:

During separation of organic compounds, solvents are used. These solvents are able to contaminate the analyte and lead to a large difference in melting point of solids obtained.

However, the error can be minimized by evaporating the solvent before washing, drying and melting point determination of the solid.

Answer:

SBr2: Electron geometry-tetrahedral; molecular geometry-trigonal pyramidal

PI4+: Electron geometry-tetrahedral; molecular geometry-tetrahedral

IBr2−: Electron geometry- Trigonal bipyramidal ; molecular geometry- linear

Explanation:

In SBr2, the molecule is of the structure type AX2E2 hence it is based on a tetrahedron but have two lone pairs of electrons hence the molecular geometry is trigonal pyramidal.

PI4+ has four electron domains and all of them are bond pairs hence both electron geometry and molecular geometry are both tetrahedral.

IBr2- is of the structure type AX2E3 hence it is based on a trigonal bipyramd and has a linear molecular geometry.

2)

SiF4 has a tetrahedral molecular and electron domain geometry because the central atom(Si) has no lone pairs.

SeF4 has a trigonal bipyramidal electron geometry with the structure AX4E. Its molecular geometry is See-saw since it has one lone pair of electrons that causes a deviation from its ideal trigonal bypyramidal geometry.

XeF4 has  an octahedral electron domain geometry and the molecule is AX4E2. The two lone pairs are positioned above and below the plane of a square hence the molecule is square planar.

Answer:

seafloor spreading

Explanation:

i took the test

Answer:

2.28 atm

Explanation:

V₁ = 2.33L,  V₂ = 1.08L

T₁ = 289K,  T₂ = 304K

P₁ = 1.05 atm, P₂ = ?

Where V₁ and V₂ are initial and final volume respectively

T₁ and T₂ are initial and final temperature respectively

P₁ and P₂ are initial and final pressure respectively

The formula to be used here is the general gas equation:

P₁V₁/T₁=P₂V₂/T₂

1.05 × 2.23/289 = P₂ × 1.08/304

P₂ × 1.08 × 289 = 1.05 × 2.23 × 304

P₂ = (1.05 × 2.23 ×304) ÷ (1.08 × 289)

P₂ = 711.82 ÷ 312.12

P₂ = 2.28 atm

Answer:

C6H1206

Explanation:

C6H12O6 is a monomer of carbohydrates also known as glucose, so it is not an electrolyte at all.

Answer:

atom

Explanation:

the atom is the smallest form.

Answer:

POTASSIUM

Explanation:

2 8 8 1________ 1A

Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

Explanation : Given,

Concentration of NaBr = 0.200 M

Volume of solution = 100.0 mL = 0.1 L      (1 L = 1000 mL)

First we have to calculate the moles of NaBr.

[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]

[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]

Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.

The balanced chemical reaction is:

[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]

From the balanced chemical reaction we conclude that:

As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]

So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]

Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole

Volume = 100 mL = 100 / 1000 = 0.1 L

Molarity of NaBr = 0.2 M

Mole = Molarity x Volume

Mole of NaBr = 0.2 × 0.1

2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)

From the balanced equation above,

2 moles of NaBr reacted to produce 1 mole of PbBr₂.

Therefore,

0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.

Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole

Learn more: https://brainly.com/question/19572703

Answer:

A

Explanation:

Slow cooling of magma beneath the surface of earth

To solve this we must be knowing each and every concept related to rock and its formation. Therefore, the correct option is option A among all the given options.

Rock is a naturally occurring mineral aggregate that is cohesive and composed of one or even more minerals. These aggregates often take the shape of recognisable and mappable volumes and are the fundamental building block of the solid Earth.

Mineral crystals as well as the sorts of rocks that serve as their hosts cycle through many forms as geologic materials. Temperature, weight, time, and variations in the climate in the Earth's crust and on its surface all play a role in the process. Slow cooling of magma beneath the surface of Earth is the  statement that best describes the formation of rock.

Therefore, the correct option is option A.

To learn more about rock, here:

https://brainly.com/question/29767269

#SPJ2

Answer:

Inductive reasoning

Explanation:

Inductive reasoning is based on making broad generalizations from specific observations. We draw conclusions from the data we have. This is the opposite of deductive reasoning, which starts with a general statement and aims to reach a specific conclusion.

Based on this, we can conclude that, if an investigator uses their knowledge, training, experience, and expertise to reach a conclusion, they are using inductive reasoning.

Answer:

major ecological grouping of plants and animals

food chain

*biome*

bacteria and fungi that break down dead matter

*decomposers*

a state of change in which the end result is equal or

balanced

*dynamic equilibrium*

the basic relationships that show how a community of plants,

animals, and bacteria live and grow and how these living

*ecosystem*

things are dependent on each other as well as the Sun, soil,

and other nonliving parts of their environment; a cycle of

relationships

line of plants and animals that shows the order in which

*Food chain*

organisms are eaten

a condition or conditions of the nonliving surroundings, such

*environmental factor*

Explanation:

Answer:Because plastic products are durable, they can last for a long time. This makes them affordable because they do not have to be replaced often. On the other hand, the popular use of plastics means that many plastics are thrown away. Plastics litter the ocean, causing harm to marine birds and mammals. Plastic breaks down into plastic dust, which can last for up to a thousand years.

^^^^^copy and paste this part^^^^^

Explanation:Plastic is he hardest material to break down with harm to sea life and land life they may be affordable but costly to the environment.

Answer:

Which one of the table is element X?

Explanation:

I have no idea and help!!!!!!!!!!!!!!!!!!!!!!!!!

Answer:

Explanation:

Silk and wool

Answer:

silk and wool fibers are obtained from animals ​

Explanation:

good luck :)

Answer:

Molecular Formula Fe2O12S3·5H2O

IUPAC Name iron(3+);tri sulfate;pentahydrate

Explanation:

Answer:

15.9994 grams

You can view more details on each measurement unit: molecular weight of Oxygen or grams The molecular formula for Oxygen is O. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Oxygen, or 15.9994 grams.

Explanation:

Answer:

First you need to know the Chemical formula for Nitrous acid which is HNO₂

Explanation:

Answer:

A catalytic converter changes nitrogen dioxide to nitrogen gas and oxygen gas is a chemical change.

Explanation:

Hello.

In this case, since physical changes do not modify the molecular composition and structure of the material undergoing it whereas the chemical change does, for catalytic converters we should know they promote chemical reaction in which the composition is changed; for instance, for the given example, the following chemical reaction is the evidence:

[tex]2NO_2\rightarrow N_2+O_2[/tex]

As you can see, nitrogen and oxygen are no longer bonded but separated by themselves, therefore, this is a chemical change.

Best regards.

Answer:

Kps = 3.07 x 10⁻⁸

pKsp= 7.51

Explanation:

First, we calculate the molar solubility of  silver(I)phosphate (Ag₃PO₄) from the solubility in g/L by using its molar mass (418.6 g/mol):

2.43 g/L x 1 mol/418.6 g = 5.8 x 10⁻³ mol/L= s

Now, we have to write the ICE chart for the aqueous equilibrium of Ag₃PO₄ as follows:

     Ag₃PO₄(g) ⇄ 3 Ag⁺(aq) + PO₄³⁻

I                               0              0

C                            +3s           +s

E                            3s               s

Ksp = [Ag⁺]³[PO₄³⁻]= (3s)³s= 27s⁴

Since s=5.8 x 10⁻³ mol/L, we calculate Ksp:

Ksp= 27(5.8 x 10⁻³ mol/L)⁴= 3.07 x 10⁻⁸

The pKsp value is:

pKsp= - log Ksp = -log (3.07 x 10⁻⁸) = 7.51