Answer:
pseudoscience
Explanation:
srry that this is so late btw, hope this helps...
Answer:
Science
Explanation:
First response is NOT correct
What did the photoelectric experiment demonstrate?
A. Light can cause electrons to be released from the surface of a
metal.
B. Light can deposit electrons on a metal surface.
C. Light can make metal atoms move around, producing electricity.
D. Light can heat metal enough to produce electricity.
Explanation:
When an electromagnetic wave like light hits a material, the electrons gets emitted. The emission of electrons is called photoelectric effect. The emitted electrons are called photoelectrons. In this process the transfer of energy takes place from light to an electron.
Hence, the correct option regarding the photoelectric experiment is (A) " Light can cause electrons to be released from the surface of a metal."
A welding torch produces a flame by burning acetylene fuel in the presence of oxygen. This flame is used to melt a metal. Which energy transformation represents this process?
chemical energy into thermal energy
kinetic energy into potential energy
kinetic energy into electromagnetic energy
potential energy into chemical energy
Answer:
chemical energy into thermal energy
Explanation:
The reaction taking place is as follows
2C₂H₂ + 5O₂ = 4CO₂ + 2H₂O + Heat
In this reaction bonds present in acetylene is broken and new bond present in water and carbon dioxide are formed . In the whole process of bond breaking and bond formation , there is net loss of energy and that energy is released as heat energy .
Thus we can say that in the whole process , chemical energy is converted into heat energy .
Answer:
A: chemical energy into thermal energy.
Explanation:
Which refers specifically to a heated solution that holds more dissolved solution than it can hold at a lower temperature? supersaturated undersaturated heterogeneous homogeneous
Answer:
A. Supersaturated
Explanation:
i got it right on edge 2021
The heated solution that holds more dissolved solution than it can hold at a lower temperature is supersaturated solution. Therefore, option A is correct.
What is supersaturated solution ?A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. By introducing a tiny solute crystal known as a seed crystal, the excess dissolved solvent in a super-saturated solution can begin to recrystallize.
A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. A solution is considered supersaturated if it contains more solute than is necessary to saturate it.
A solution that contains more solute than it can hold at a specific temperature is said to be supersaturated. Usually, raising a solution's temperature causes more particles to dissolve, increasing the solute concentration.
Thus, option A is correct.
To learn more about supersaturated solution, follow the link;
https://brainly.com/question/1432936
#SPJ6
Determine the net iconic equation for the following chemical reaction: HCl(aq) + NH4OH(aq)———-> NH4Cl(aq) + H2O(I) Hint: HCl(aq) is strong acid NH4OH(aq) is a weak base
Answer : The net ionic equation will be,
[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]
Explanation :
In the net ionic equations, we are not include the spectator ions in the equations.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
The given balanced ionic equation will be,
[tex]HCl(aq)+NH_4OH(aq)\rightarrow NH_4Cl(aq)+H_2O(l)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]H^+(aq)+Cl^-(aq)+NH_4^+(aq)+OH^-(aq)\rightarrow H_2O(l)+NH_4^+(aq)+Cl^-(aq)[/tex]
In this equation, [tex]NH_4^+\text{ and }Cl^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]
For Group 2A metals, which electron is the most difficult to remove? the second the first the third All the electrons are equally difficult to remove.
Answer:
the third
Explanation:
when you remove the first the nucleur attraction becomes greater pulling the other valence electron closer thus the more you remove the harder it gets because the pull from the nucleus increases.
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
The elements that belongs to Group 2A metals are alkaline earth metals, their electronic configurations is [noble gas ]ns² so, it is easy to remove first electron and then second electron but it is very difficult to remove the third electron because after removing two electron we get noble gas configuration and effective nuclear charge also increases after removal of second electron.
Therefore, the correct option is option C.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ2
PLEASE HELP!! thank you Which element does X represent?
Answer:
95 Kr36
Explanation:
The process by which a large nucleus split into two smaller nuclei is called nuclear fission and occurs after the nucleus has absorbed a neutron that is a product of the radioactive decay of another atom. The formed fission fragments are unstable and extremely radioactive.
what's love like? what feels are involved?
Sulphuric acid, also called ‘king of chemicals' has the formula H2SO4. Its appearance is different from that of hydrogen and sulphur. Give two other reasons why sulphuric acid is a compound and not a mixture.
Explanation:
Before proceeding to answering the question, we have t understand what we mean by both mixture and compound.
A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.
A compound on the other hand is a chemical substance composed of many identical molecules composed of atoms from more than one element held together by chemical bonds.
The two other reason why H2SO4 is a compound and not a mixture are;
1) The components which are Hydrogen, Sulphur and Oxygen cannot be separated by physical means.
2) It has a constant melting and boiling point.
What is the acceleration of the object’s motion? 0.5 m/s2 -0.5 m/s2 2 m/s2 -2 m/s2
Answer: -2m/s2
Explanation:
Using the following equation ; acceleration = Change in velocity / time
i.e a = v - u / t
where 'a' = acceleration
v = final velocity
u = initial velocity
t = time
Therefore; from the graph we have acceleration to be, 0 - 6m/s / 3s = -2m/s2
A perfume bottle is dropped in the comer of a room. The odor of the perfume can be detected on the other side of the statement best describes this observation? Particles are moving from regions of high concentration to low concentration.Particles are moving from regions of low concentration to high concentration. Particles are moving through a small opening into a smaller volume. Particles are moving through a small opening into a larger volume.
Answer:
Particles are moving from regions of high concentration to low concentration.
hope this answer correct (^^)
Answer:
A. Particles are moving from regions of high concentration to low concentration.
Explanation:
took a test
Other than carbon being relatively small, what is another reason that carbon can form so many compounds? the ability to form four covalent bonds the ability to change shape the ability to form a diatomic molecule the ability to split its electrons
Answer:
Ability to form four covalent bonds.
Explanation:
Carbon is the first member of group 14. It is essentially a nonmetal. It is a small atom which regularly exhibits tetra valency. This means that carbon is able to form four covalent bonds to four chemical species which may be the same or different each time. This leaves room for many different possible combination patterns of carbon with other chemical species.
Hence carbon forms a very large number of compounds due to its small size and its ability for form four covalent bonds to other chemical species in any bonding situation.
Answer: the ability to form four covalent bonds
Explanation:
A drug problem can quickly consume A)a small portions of a person income B)the bulk of a person income C)a person excess income
Answer:
b
Explanation:
a drug problem consumes the bulk of a persons income because drugs are expensive to buy
A drug problem can quickly consume the bulk of a person income
What is a drug problem?A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.
Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.
People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.
The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.
The correct answer is option B.
Learn more about drug problem, refer:
https://brainly.com/question/23284149
#SPJ2
How might a scientist confirm the results of other expirements by doing an experiment
Which will change will cause the gravitational force between a baseball and a soccerball
A metal sample is heated and placed into the water in a calorimeter at room temperature. Which statement best describes how the calorimeter can be used to determine the specific heat capacity of the metal sample? Energy transfers to the metal from the water and calorimeter until they are all at room temperature. Energy transfers from the metal to the water and calorimeter until they are all at room temperature. Energy transfers to the metal from the water and calorimeter until they all reach a single temperature. Energy transfers from the metal to the water and calorimeter until they all reach a single temperature.
Answer:
Energy transfers from the metal to the water and calorimeter until they are all at room temperature.
Explanation:
Calorimetry is the process that is used to determine the amount of heat that has been transferred in any process. In any chemical or physical process, the amount of energy is required. This energy is measured by the process of calorimetry. A calorimeter is a device that is used in this process. The heat that has been used in the process is measured and the change in the temperature is noted.
Answer:
b
Explanation:
How do you find the amount of electrons for any element?
Answer:
If you know the number of protons and neutrons you have to simply subtract the number of neutrons by number of protons the answer will be number of neutron
Explanation:
Answer:
We can find the amount of electrons through its Atomic number and with the help of electronic configuration
~ WILL MARK AS BRAINLIEST ~
What is the mass of 15% of solution of lime that is formed by dissolving 30g of calcium hydroxide in water?
Answer:
200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.
Explanation:
Mass of solution = M
Mass percentage of the solution of lime = 15%
Mass of lime or calcium hydroxide = m = 30 g
The Formula of mass percentage is given as :
[tex]m/m\%=\frac{m}{M}\times 100[/tex]
On substituting the values in ab above formula :
[tex]15\%=\frac{30 g}{M}\times 100[/tex]
[tex]M=\frac{30 g}{15}\times 100=200 g[/tex]
200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.
Explain the methods of passive transport that move molecules across the plasma membrane of the cell.
What are some similarities and differences between group 1, 0 and 7 elements on the periodic table?
Answer:
Difference : group 1 elements are known as alkali metals, group 7 elements are known as transition metals
Similarities : Both group 1 and 7 elements become more reactive as u go down and up respectively
Name one way chemicals can help the environment
Energy storage and transport. Chemical energy transport.
Answer:
to clean the water
Explanation:
differentiate between short period and long period
The question is incomplete. The complete question is as follows:
Differentiate between a short period and long period production functions.
Answer:
Difference between a short period and long period production functions is as follows:
Short period: During this period at least one of the factors of production is available in a fixed quantity. For example: Framers having fixed land for growing crops.
Long period: During this period all the factors of production are variable. So change in any variable can increase the production.
How do I write these decimal numbers in expanded form? 0.913, 0.205, 0.047, 0.480
Thanks! :)
Explanation:
To write a decimal in expanded form, write the number as a sum of its place values.
0.913 = 0.9 + 0.01 + 0.003
0.205 = 0.2 + 0.005
0.047 = 0.04 + 0.007
0.480 = 0.4 + 0.08
How much water should be added to 12 ml of alcohol to obtain 12% alcohol solution?
Answer:
88 mL of water.
Explanation:
Data obtained from the question include the following:
Volume of alcohol = 12 mL
Percentage of alcohol = 12%
Volume of water =..?
We can thus, obtain the volume of water needed to make 12% of the alcohol solution as follow:
Percentage of the solution = 100%
Percentage of alcohol = 12%
Percentage of water =?
Percentage of water = percentage of solution – percentage of alcohol
Percentage of water = 100 – 12
Percentage of water = 88%
Since 12% of alcohol is equivalent to 12 mL of alcohol, therefore 88% of water will also be equivalent to 88 mL.
Therefore, 88 mL of water is needed to make 12% of alcohol.
endothermic or exothermic?
The reaction between ammonium nitrate and water absorbs heat from the surrounding environment.
Three drops of concentrated sulfuric acid added to 100 milliliters of water in a beaker makes the beaker hot.
Ammonium chloride dissolved in a beaker of water makes the beaker cold.
Uranium atoms are split to produce nuclear energy.
Water separates into hydrogen and oxygen when an electric current is run through it.
Methane and oxygen are combined to produce methanol and heat.
Answer:
Endothermic
Exothermic
Endothermic
Exothermic
Exothermic
Exothermic
Explanation:
Endothermic is when a reaction absorbs heat.
Exothermic is when a reaction releases heat.
Endothermic reactions:
The reaction between
ammonium nitrate and
water absorbs heat
from the surrounding
environment.
Ammonium chloride dissolved
in a beaker of water makes the
beaker cold.
Water separates into
hydrogen and oxygen
when an electric current
is run through it.
Exothermic reactions:
Three drops of concentrated
sulfuric acid added to 100
milliliters of water in a beaker
makes the beaker hot.
Uranium atoms are split to
produce nuclear energy.
Methane and oxygen are
combined to produce
methanol and heat.
#platofam
The correct increasing order of Bond angle is H2O < NH3 < BCl3 < CCl4 H2O < NH3 < CCl4 < BCl3 NH3 < H2O < BCl3 < CCl4 NH3 < BCl3 < CCl4 < H2O
Answer:
H2O < NH3 < CCl4 < BCl3
Explanation:
Bond angle of a molecule or an ion can be explained by two concepts which are either by their valence shell electron pair repulsion (VSEPR) model or hybridization.
The VSEPR model determines the total number of electron pairs surrounding the central atom of the species. All the electron pairs will orient themselves in such a way as to minimize the electrostatic repulsions between them. These repulsions hence determine the geometry of the covalent bond angles around the central atom.
Hence; as the number of lone pairs increases from zero to 2 the bond angles diminish progressively.
Hybridization is the mixing and blending of two or more pure atomic orbitals to form two or moe hybrid atomic orbitals which are identical in shape and energy. During the process of formation of these hybrid orbitals, The bonds formed i.e the sigma bond and the pi bond determines the bond angle of such compound.
From the given compounds;
H20 have a bond angle of 104.5°
NH3 have a bond angle of 107°
BCl3 have a bond angle of 120°
CCl4 have a bond angle of 109.5°
thus in an increasing order of bond angle:
H2O < NH3 < CCl4 < BCl3
Describe how u would separate a mixture of salt , sand and iodine into different components. please help i will give a brainliest for this . PLEASE HELP?
to remove iodine sublime
to remove sand filter
to remove water evaporate
Explanation:
1. put the mixture in a beaker
2.Heat the mixture using a watch glass filled with cold water, the iodine will sublime at the base of the watch glass.
3.Add water to sand and salt. Stir for salt to diffuse in the water
4.Filter sand from the solution using a filter paper
5.evaporate the remaining water to remain with Salt crystals.
The number of joules needed to raise the temperature of 32 g of water from 12 °C to 54 °C is
The specific heat of water is 4.184 J/g °C.
Answer: 5,600 J
Explanation:
Joules = mass x specific heat x temperature change
32 x 4.184 x (54 - 12)
= 133.888 x 42
= 5,623.296
(significant figures => 5,600)
determine the type of the following chemical reaction: Mg(s) + 2HCl(aq)——-> H2(g) + MgCl2(aq) a. single replacement reaction b. decomposition reaction c. combination reaction d. double replacement reaction
Answer:
a. single replacement reaction
Explanation:
Mg(s) + 2HCl(aq)——-> H2(g) + MgCl2(aq)
Mg replaces H, so this is a single replacement reaction.
In the hydrogenation of oils the catalyst used is:
A. Pt
B. Ni
C. Fe
D. V2O5
Answer:
B
Explanation:
plz follow me and give brainliest
3 point different between fundamental units and derived units
Answer:
Fundamental Units:
1) Fundamental units also called base units are used to describe base quantities
2) They cannot be expressed in terms of derived units.
3) Examples : Meter, Ampere, Second etc.
Derived Units:
1) Derived units are used to describe derived quantities.
2) They can be expressed in terms of fundamental units.
3) Examples: Newton, Joule, Hertz, Pascal etc.
Answer:
3diferences
Explanation:
fundamental are independent but derived are dependent
there are 7fundamental units but there are many derived units from fundamental.
meter, second, kilogram, etc are examples of fundamental but m/s^2, newton, joule, etc are derived units