is a
The wire in a simple circuit
which forms an
unbroken pathway, allowing the
electric charges to flow.
A. switch
B. insulator
C. resistor
D. conductor

Answer:

The collision is inelastic

Explanation:

There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.

However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.

Answer:

(This will depend on the type of fuel, I will assume that the fuel is petrol)

First, let's find the expected energy consumption in the US for the next 10 years.

We know that in one year, a person consumes 3.5*10^11 joules.

There are 310,000,00 people on the US

Then the total consumption in one year is:

310,000,000*3.5*10^11 joules = 1.085*10^20 J

In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:

10*1.085*10^20 J = 1.085*10^21 J

Now let's find the mass of fuel required.

We know that a liter of petrol has 31,536,000 joules of energy,

And a liter of petrol weights 0.75 kg

To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:

N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13

We will need  3.44*10^13 liters of petrol.

And the total mass of petrol will be:

M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.

Answer:

El neumático soportará una presión de 1.7 atm.

Explanation:

Podemos encontrar la presión final del neumático usando la ecuación del gas ideal:

[tex] PV = nRT [/tex]

En donde:

P: es la presión

V: es el volumen

n: es el número de moles del gas

R: es la constante de gases ideales

T: es la temperatura

Cuando el neumático soporta la presión inicial tenemos:

P₁ = 1.5 atm

T₁ = 300 K

[tex] V_{1} = \frac{nRT_{1}}{P_{1}} [/tex]  (1)  

La presión cuando T = 67 °C es:

[tex] P_{2} = \frac{nRT_{2}}{V_{2}} [/tex]   (2)

Dado que V₁ = V₂  (el volumen del neumático no cambia), al introducir la ecuación (1) en la ecuación (2) podemos encontrar la presión final:

[tex] P_{2} = \frac{nRT_{2}}{V_{2}} = \frac{nRT_{2}}{\frac{nRT_{1}}{P_{1}}} = \frac{P_{1}T_{2}}{T_{1}} = \frac{1.5 atm*(67 + 273)K}{300 K} = 1.7 atm [/tex]  

Por lo tanto, si en el transcurso de un viaje las ruedas alcanzan una temperatura de 67 ºC, el neumático soportará una presión de 1.7 atm.

Espero que te sea de utilidad!

Answer:the process by which businesses or other organizations develop international influence or start operating on an international scale.

Explanation:

Answer:

400N

Explanation:

F= ma

F= 100 x 4

F= 400N

Answer:

D) 1 & 2

Explanation:

Ice melting can be refrozen and although the pencil breaks, it doesn't change the chemical formula of the pencil

Answer:

Explanation:

potential energy=mass*height*gravity

=10*10*9.8

=100*9.8

980 joule

Answer:

Explanation:

Here, we are asked to calculate the average speed in km/minute.

As we know that,

Here,

→ Total distance = 10 km + 10 km

→ Total distance = 20 km

→ Total time = 8 minutes + 2 minutes

→ Total time = 10 minutes

Substitute the values in the formula of average speed,

→ Average speed = Total distance ÷ Total time taken

→ Average speed = 20km ÷ 10 minutes

Answer: A.) concave lens

Explanation: i hope this helps shawtay :)

In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look." Option C is correct.

A lens is an optical component that is used to refract (bend) and focus light. It is typically made of a transparent material, such as glass or plastic, and has a specific shape that allows it to alter the path of light as it passes through.

Here,
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look."

A concave lens is thinnest at the center and thicker at the edges, which causes light rays passing through the lens to diverge or spread out. By placing a concave lens in front of a nearsighted eye, the lens causes incoming light rays to diverge more before they reach the eye's lens, which then focuses them properly on the retina, resulting in clearer vision.

Learn more about the lens here:
https://brainly.com/question/2919483
#SPJ6

Answer:

I = 1.36 x 10⁻⁴ W/m²

Explanation:

The intensity of the sound produced by the Elephant can be calculated by using the following formula:

[tex]I = \frac{P}{A} \\\\[/tex]

where,

I = Intensity of sound = ?

P = power of sound = 0.45 W

A = area = πr² = π(32.5 m)² = 3318.3 m²

Therefore,

[tex]I = \frac{0.45\ W}{3318.3\ m^2} \\\\[/tex]

I = 1.36 x 10⁻⁴ W/m²

Answer:

342,690

Explanation:

I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)

Answer:

i would say the third one

Explanation:

may i be brainliest?

Answer:

The Magnitude of the angle of reflection equals that of Incidence from the Law of reflection

So its 50°.

Explanation:

Answer:

how tightly strung the wire is

-- Make the string tighter or looser.

-- Keep the same length, but make the string thicker or thinner.

-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.

Answer:

[tex]v'_2=3V[/tex]

Explanation:

From the question we are told that:

Bowling ball Speed [tex]v_1=5 m/s[/tex]

Beach ball Speed [tex]v_2=2 m/s[/tex]

Let The Mass be equal i.e

 [tex]M_1=M_2[/tex]

Therefore

Generally the equation for Velocity of beach ball after collision [tex]v'_2[/tex] is mathematically given by

Since Velocity is Vector Quantity

Therefore

 [tex]v'_2=v_1-v_2[/tex]

 [tex]v'_2=5-2[/tex]

 [tex]v'_2=3V[/tex]

Answer:

mark me as the brainly plss

Answer:

[tex]\rho=3\times 10^{-8}\ \Omega-m[/tex]

Explanation:

Given that,

Voltage, V = 120 V

The length of the wire, l = 20 m

The current density of the wire, [tex]\dfrac{I}{A}=2\times 10^8\ A/m^2[/tex]

We need to find the resistivity of this wire. We know that,

[tex]R=\rho \dfrac{l}{A}[/tex]

Where

[tex]\rho[/tex] is the resistivity of wire

Also, [tex]R=\dfrac{V}{I}[/tex]

So,

[tex]\dfrac{V}{I}=\rho \dfrac{l}{A}\\\\\rho=\dfrac{V}{l\dfrac{I}{A}}[/tex]

Put all the values,

[tex]\rho=\dfrac{120}{20\times 2\times 10^8}\\\\=3\times 10^{-8}\ \Omega-m[/tex]

So, the resistivity of this wire is equal to [tex]3\times 10^{-8}\ \Omega-m[/tex].

Answer:

sorry

Explanation:

Answer:

Hey!

_________________

Voltage (V) = 0.8V

Current (I) = 200 mA = 200/10^3 = 2/10

Resistance = ?

Resistance = Voltage / Current

Voltage = Current × Resistance

0.8 = 2/10 × Resistance

0.8×10/2 = Resistance

8/2 = Resistance

Resistance = 4 ohm

_________________

Hope it helps...!!!

Explanation:

Answer:

0.175g

Explanation:

A = A02^-(t/hl)

= (5.6g)2^-(750/150)

= 0.175g

Answer:

You either need to lower the volume so the sounds intensity is lessened. Or you can pad the walls to absorb the sound rather than defect.

Explanation:

Sound intensity allows it to be heard further, but in an enclosed room it will start returning. Sound will deflect off of hard objects do to its interactions with solids. A softer and foamy material can dampen it.