Answer:
Extractive metallurgy
Explanation:
Extractive metallurgy is the practice of removing valuable metals from an ore and refining the extracted raw metals into a purer form.
लेख्नुहोस् । (Deserts are very hot during the day and very cold
during the night. Give reason.)
Because deserts have such little water vapor in the air, it makes it harder to trap heat or cold in a desert. And at night, the sun no longer heats the desert and the heat from the day doesn't stay trapped. Because of this, some deserts can get extremely cold at night, dropping to temperatures below 40F.
Hope this helps!! Have a wonderful day!!
It is actually sand, which turns the entire phenomenon hot. Sand cannot hold the heat. It acts like a mirror to the sun. During the daytime, it stays warm, and when the Sun is absent it loses all its heat making the nights colder. There’s nothing in the desert that can either absorb heat from the sun or hold it on the surface when the sun is set.
When a car starts rusting where there is a scratch on the paint, a redox reaction is happening
TRUE OR FALSE
Answer:
it is true
Explanation:
hope it helps :)
Answer: I think it is true
Explanation:
it is true because it will start rusting when there is a scratch on the paint!
I HOPE THIS HELPS YOU!!
In a coffee-cup calorimeter, 100.0 g of H2O and 8.70 grams of Na3PO4 are added. The water had an initial temperature of 24.6 oC. After the dissolution of the sodium phosphate the temperature changed to 31.3 oC.
-Was the dissolution exothermic or endothermic? Explain.
-Calculate how much heat the water lost or gained.
Answer:
a.) exothermic
b.) 2,800.6 J
Explanation:
Version: TAKEHOME
1) The ionic compound below is soluble in water. Complete the following:
-Draw the interaction of the ionic compound and water in the proper orientation. 3pts
-On the line below discuss the strength of the interaction within the compound compared to the strength of interaction
between the compound and water.
Answer:
The hydrogens of the water molecules around the bromide ion will need to be faced toward it, whereas the oxygens of the water molecules around the potassium ion will need to be faced toward it.
The strength of the interaction within the compound will supersede that of the interaction between the compound and water.
Explanation:
To answer this question, you need to be aware of the structure of a water molecule and its components. A water molecule has the chemical formula of H2O, and oxygen is inherently electronegative, meaning that it attracts electrons very strongly. As a result, when it is in H2O, it pulls the valence electrons of the H atoms very strongly, which results in the H atoms being partially positively charged and the O atom being partially negatively charged. Therefore, the O atom is going to be attracted to the potassium ion, whereas the H atom is going to be attracted to the bromide ion.
The answer to the second part of the question is as written above because ionic bonds are stronger than ion-dipole bonds; that's just the way it is.
For the following Bronsted acid-base reaction, complete the reaction, identify the acid, base, conjugate
acid and conjugate base. HF + PO4^-3
Answer:
algun moderador puede acabar a este otro este me borró respuesta que no debió borrar
HURRY ILL GIVE BRAINLIEST!
Match the cause to its effect.
Answer:
Cattles are giving nutrition supply throughout the year----some animals require nutrient enhancement for health
calves are given colostrum at birth----newborns require antibodies from their mothers
I dont want to write, so you know what the last option is
Explanation:
:) hope this helps
It is the year 2032, and a new planet (Planet Y) is discovered. An astronaut with a mass of 79.00 kg visits the new planet. It is discovered that his weight on the new planet is 740.8 lbs. What is the estimate of the g force on the planet and would the astronaut be heavier on Planet Y or on Earth? (Earth has a g force of 9.81 m/s2 ).
Answer:
“Newton’s Law of Gravity” gives the gravity force between two objects with masses m
and M separated by distance r:
F G
m M
r
2
G is called the Gravitational Constant, and has the value
6.671011N m
2
kg2
(N is for
Newton, the physicists’ unit of force) or
1.51011 lbm
2
kg2
.
Let’s go back to the example given in the text: two 150 lb people separated by 1 meter.
The mass of each person is
150lb
2.2
lb
kg
68kg
. Putting these into the formula gives
F 1.5101 1 lb m
2
kg2
(68kg)
2
(1m)
2
107
lb.
Newton’s Law of Gravity actually gives the force only between two small objects. If one
of the objects is a sphere (such as the Earth) then it turns out that you can still use the
formula, but you must use the distance to the center of the sphere as the value for r. As
an example, let’s put in numbers for a 1 kg object sitting on the surface of the Earth.
Then the force of attraction is given by the gravity equation with m = 1 kg, M = the mass
of the Earth =
24 610
kg, and r = radius of the Earth (that’s the distance to the center of
the sphere). This distance is r = 6371 km ≈
6
610
meters. Without plugging in the
numbers, can you guess what the answer will turn out to be? Guess, and then check this
footnote2
to see if you guessed correctly.
Suppose you weigh 150 lbs on the Earth. Then your mass is
150lb
2.2
lb
kg
68kg
. What will
you weigh on the Moon? We can calculate that by using Newton’s Law of Gravity, and
putting in the M = the mass of the Moon =
22 7.310
kg, r = the radius of the moon =
6
1.710
meters. The answer is F = 25 lb. That means you will weigh 25 lb. on the
surface of the Moon.
Explanation:
hope this helps :)
PLEASEEEE HELPPP??????
Answer:
(B) Grasses to Grasshoppers to Birds to Foxes
Explanation
How many grams of carbon dioxide would be produced if we use 35 grams of methane in the reaction below? CH4 +2O2---- Co2 + 2H2O
Answer:
96g of CO₂ would be produced
Explanation:
Based on the reaction:
CH₄ + 2O₂ → CO₂ + 2H₂O
1 moles of methane, CH₄ produces 1 mole of carbon dioxide, CO₂.
To solve this question we must find the moles of methane added in the reaction. These moles added are equal to moles of CO₂ produced. With the molar mass of CO₂ (44.01g/mol) we can find the grams that would be produced:
Moles CH₄ -Molar mass: 16.04g/mol-:
35g * (1mol / 16.04g) = 2.182 moles of CH₄ are added = Moles CO₂ produced.
Mass CO₂ produced.
2.182 moles CO₂ * (44.01g / mol) =
96g of CO₂ would be producedHelp asap please
4. Mixing sand and salt in water then passing it through a filter separates out the sand because salt
in water and sand does not.
a) reacts
b) dissolves
c) disappears
Answer:
dissolve
Explanation:
salt will dissolve in water while sand will not, so you arent going to see salt pass through
Answer:
b
Explanation:
CH3OH can be synthesized by the reaction:
CO(g) + 2 H20) — CH3OH)
What volume of CH3OH gas (in L) can be synthesized if 18.6 L of Hy gas completely reacts at STP conditions?
Answer:
5
Explanation:
Describe two physical properties of sodium which are different from the physical properties of transition elements such as copper.
Answer:
Malleability : Capable of being shaped or bent.
Ductility : Easily pulled or stretched into a thin wire.
Luster : Has a shine or glow.
Conductivity : Good transmission of heat or electricity.
Softness : Soft enough to be cut with a knife.
what are the possible
phenotypels for the offspring when you cross two heterozygous pink flowers? *
Answer:
the phenotype of the offspring will be pink
What is simple chemical test could you carry out to see if carbon dioxide has been produced
Carbon Dioxide
A positive test will result in the lime water turning milky. Lime water turns milky as the Calcium hydroxide (chemical name for limewater) reacts with carbon dioxide to form Calcium Carbonate which is insoluble in water and thus forms a milky white precipitate.
(Answer ASAP)
In which state(s) of matter could a substance have thermal energy?
A) Only liquids and gases
B) Only liquids and solids
C) Only liquids
D) Liquids, solids, and gases
Why do you think it is a bad idea to use taste, touch, or smell to identify an
unknown chemical?
Answer:
Because it can cause health problems or injuries to our sense organs.
Explanation:
Chemicals in the laboratory are made up of different constituents, which may be dangerous or injurious to health. This is the reason why safety measures or precautions have to be taken when working in the laboratory. One of those safety measures is that "one should never use taste, touch, or smell to identify an unknown chemical".
This is so because a chemical that is unknown amounts to the fact that what such chemical contains is unknown, hence, the chemical might have the ability to cause harm or injuries to the sense organ. For example, a conc. acid that is tasted will burn the tongue etc.
4.2 L of a gas has a pressure of 560mmHg at 72⁰F. What is the temperature at760mmHg if the volume is still 4.2 L? (5 pts)
Answer:
The temperature at 760mmHg if the volume is still 4.2 L is 400.862 K
Explanation:
Gay Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. This law can be expressed mathematically as follows:
[tex]\frac{P}{T} =k[/tex]
Having an initial state 1 and a final state 2, the following is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 560 mmHgT1= 72 F= 295.372 K (being 32 F= 273.15 K)P2= 760 mmHgT2= ?Replacing:
[tex]\frac{560 mmHg}{295.372 K} =\frac{760 mmHg}{T2}[/tex]
Solving:
[tex]T2= 760 mmHg*\frac{295.372 K}{560 mmHg}[/tex]
T2= 400.862 K
Read the chemical equation.
Mg + HCI - MgCl2 + H2
How many liters of hydrogen gas is produced at 298 K and 0.940 atm if 4.00 moles of hydrochloric acid react with an excess of magnesium metal?
O 26.0 liters
O 52.1 liters
82.3 liters
104 liters
Answer:
74.04 liters of hydrogen gas are produced.
Explanation: According to reaction, 2 mol of HCl gas gives 1 mole of hydrogen gas, then 6 moles of HCl gas will give: moles of hydrogen gas that is 3 moles.
The pressure of the hydrogen gas at 298 K = 0.990 atm
The volume occupied by the hydrogen gas = V
Number of hydrogen has moles = 3 moles
PV=nRT
V = 74.04 L
74.04 liters of hydrogen gas are produced.
Answer:
38.2 liters Is the answer
Explanation:
The unit for work is the _______ which is also called the ____________.
Sam did an experiment. He boiled water in a teapot and saw vapor coming out. When he placed a cold plate in contact with the vapor it formed droplets of water.? Can you imagine what was that process and Why did he observe this?
Answer:
evaporation and condesation
Explanation:
because he was curiuos
HELP ASAP!!!
WAVES ALWAYS ORIGINATE WITH SOME
a
person
b
object
C
disturbance
Answer:
Disturbance
Explanation:
I believe it is Disturbance because waves are normally caused by wind, and wind classifies as Disturbance.
Which part of homeostasis is this adorable puppy balancing out with his little stuffed animal buddy?
Body Temperature
Energy
Waste
Water Level
Cuteness
Plzzz help
Answer:
body temperature and energy
Freshwater makes up about 90% of the Earth's surface.
Answer:
what is your question?
Explanation:
I don't understand
Using your own words, explain energy.
The complete
conversion of 90.0
grams of hydrogen to
ammonia would require
how many moles of
nitrogen gas?
Answer:
15moles
Explanation:
The balanced equation of this reaction is as follows:
N2 + 3H2 → 2NH3
Molar mass of H2 = 2g/mol
mole = mass/molar mass
mole = 90/2
mole = 45moles.
Based on the above balanced equation, 1 mole of nitrogen gas (N2) reacts with 3 moles of hydrogen gas (H2)
Hence, 45moles of hydrogen gas will produce (45 × ⅓) = 15moles of nitrogen gas (N2).
Answer:
Its 14.9 for those who are doing the escape room :)
Explanation:
solve the following equation:13x - 22 = 30
Answer:
52/13
Explanation:
13X=30+22
x=52/13
7. A gas occupies 900.0 mL at a temperature of 27.0°C. What is the volume if the temperature
increases by 105 °C? *
Answer:
thats the ans.
https://socratic.org/questions/a-gas-occupies-900-0-ml-at-a-temperature-of-27-0-c-what-is-the-volume-at-132-0-c
Explanation:
If 35.4 liters of hydrogen gas are used, how many liters of nitrogen gas will be needed for the above reaction at STP?
Answer:
ujdbdbfbf fbFbsygtsjysnsgndhngsnsgnafbfa
how is water treated for human use
Answer:
the water is first screened then filtered to remove undesolvable objects then passed into the sedimentation tank which is again filtered after leaving the tank. Chlorine is then added to the fine filtered water to kill viruses and bacteria. now the water is clean hope i ave help u enough
Explanation:
The pressure in a bicycle tire is 1.34atm at 33.0 ° C. At what temperature will the pressure inside the tire be 1.60atm?
Answer:
92.37°C
Explanation:
Assuming the volume remains the same in both the states ( bicycle tire).
Then as per ideal gas equation
[tex]P_1/T_1 = P_2/T_2[/tex]
where P1, P2 are pressure at two different states and T1, T2 are temperature at these two states
Given:
P1 = 1.34 atm, T1 = 33.0 ° C = 306K
P2 = 1.60 atm, T2 = ?
1.34/306 = 1.60/T_2
⇒ T2 = 1.60×306/1.34
= T2= 365.37K= 92.37°C