john and kate live in the regions marked on the map. john experiences severe winters, with snowstorms and blizzards. in contrast, kate hardly ever experiences temperatures near or below freezing. which of the following statements explain the climate differences in these locations??

Answer:

larger

Explanation:

just trust me

The smaller the mass of an object, the smaller its inertia, because the inertia of any object is directly proportional to the mass of the object

The ability of an object to resist changes in motion is known as inertia. The amount of inertia is directly related to an object's mass; in fact, as we frequently observe, the heavier an object is, the harder it is to change its direction of motion.

A straightforward illustration: While it is relatively simple to stop a tennis ball that has been thrown in our direction, we are aware that it is more difficult to stop a large truck that is moving in the same direction at the same speed. This is because the truck has a much higher mass than the tennis ball and a higher moment of inertia. As a result, inertia rises as mass does.

Since the inertia of any object is directly proportional to its mass, the smaller its mass, the less inertia it will have.

Learn more about Inertia from here

https://brainly.com/question/1358512

#SPJ5

Answer:

Lo primero que hay que recordar es la relación:

Velocidad = Distancia/tiempo.

Para el caso de Pedro, el vive a 5km de la escuela (es decir, para llegar a la escuela, el debe recorrer -5km, entonces la distancia es -5km), y recorre esa distancia en 0.25 horas, entonces su velocidad es:

Velocidad = -5km/0.25hr = -20km/h

Esto significa que Pedro se mueve con una velocidad de -20km/h, lo que significa que se mueve hacia el oeste con un módulo de 20km/h

Para el caso de Juan, el vive a -4km de la escuela, entonces el tendrá que recorrer 4km para llegar a la escuela, y los recorre en 0.25 horas, entonces su velocidad sera:

Velocidad = 4km/0.25h = 16 km/h

Lo que significa que Juan tiene una velocidad de 16km/h hacia el este.

Answer:

The main reason for this is the engineering and technology driven building construction in Chile than in Haiti

Explanation:

The main reason for this is the engineering and technology driven building construction in Chile than in Haiti. Most of the buildings in Haiti do not fit in the building byelaws norms as most of them were constructed in a short period of time with less engineering and at cheaper rate. While building in Chile were built adhering to the building codes and byelaws.

The base of the building is Chile were separated from each other using the “base isolation” technology and the were also more flexible as compared to the buildings in Haiti.  

The skyscrapers in Chile were constructed in a way that they can float on the arrangements of ball bearings and padded cylinders

Answer:

The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D

Explanation:

In this exercise it is indicated that Jack pushes a car, it is desired that Jill pushes the car so that the speed is constant

take as positive the direction of Jack's thrust

             F_jack - F_jill = 0

              F_jill = F_jack

therefore the push of the two must be equal and Jill's push must have the opposite direction to Jack's push.

The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D

Answer:

x = 0.78 m = 78 cm

Explanation:

Applying the law of conservation of energy to the spring-mass system, we can write the following equation:

[tex]Kinetic\ Energy\ at\ Mean\ Position= Potential\ Energy\ at\ extreme\ position\\\frac{1}{2}mv^2 = \frac{1}{2}kx^2\\\\x^2 = \frac{mv^2}{k}\\\\x = \sqrt{\frac{mv^2}{k} }[/tex]

where,

x = maximum displacement = ?

m = mass = 3.6 kg

v = speed at mean position = 5.2 m/s

k = spring constant = 160 N/m

Therefore,

[tex]x = \sqrt{\frac{(3.6\ kg)(5.2\ m/s)^2}{160\ N/m} }\\\\[/tex]

x = 0.78 m = 78 cm

Answer:

C

Explanation:

So, lets start off by thinking about what we know is in both cells, and rule out from there.

There are just some basic things you need in eukaryotic cells, those include the following:

Here are jsut a few examples of what can be found in both plant and animal cells, however we can already rule out all of the following except for:

C

Because remember, c talks about the chlorplast, which is not the chlorplasm found in both plant anf animal cells, its just the chloroplast found in plant cells.

Although I gave the asnwer to you. Here are some things that are in plant cells that arent in animal cells:

Animal cells on the other hand, have a few things that plant cells do not as well:

Hope this helps! ;)

Answer:

hi your question is incomplete below is the missing part of your question

Question : How does the direction and magnitude of Fe compare to Fg

answer : Not enough information is given

Explanation:

From the above information given in the question the direction and magnitude of FE cannot be compared to Fg and this is simply because the mass of the particle that  force is been exerted on is not given therefore we cannot ascertain the magnitude of the gravitational force. Therefore we can conclude that not enough information is given

Answer:

Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.

Explanation:

Hope this helped!!!

Answer:

Given that - R = 6 ohm

V = 3 volt

n = ?

so by ohms law , V = I X R

I = V \ R = 3 \ 6 = 0.5 A

we know that I = Q / T here t is 1 sec

Q = I X T = 0.5 X 1 = 0.5 C

By the law of quantization ,

Q = n x e

n = Q / e = 0.5 / 1.6 x 10 ^-19

n = 0.3125 x 10^19

hoped so u got the answer mark me as brainellist :)

Answer:

0.5/1.6×10^-19

Explanation:

formula for current is v

I R

3/6=0.5

charge if found by the product of current and time which is one second

0.5×1 =0.5

deficiency of n=no of charges×charge of electrons

0.5/1.6×10^-19

Answer:

The objectives of the tourist for visiting Nepal are .

hope it is helpful to you ☺️

Answer:

A) As the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch

B) As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.

Explanation:

From Doppler effect, the closer the source of sound gets to the observer, the higher the frequency and in turn the higher the pitch.

Meanwhile, the farther a source goes from an observer, the lower the frequency of the sound and also the lower the pitch.

Thus, as the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch.

As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.

Answer:

a. The quality of the sound would have a high pitch and thus be loud.

b. The quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.

Explanation:

Using the formula for Doppler shift f' = (v ± v')f/(v ± v") where v = speed of sound in air, v'= speed of hearer = 0 m/s (since he is stationary), v" = speed of ambulance and f = frequency of sound from ambulance

So, f' = (v ± v')f/(v ± v")

f' = (v ± 0)f/(v ± v")

f' = vf/(v ± v")

a. What is the quality of the sound of an ambulance's siren when it moves toward a stationary hearer?

Since the source (ambulance) moves towards the detector, (hearer), we would get an upwards shift in frequency. (Since our denominator has to be a minimum, so we use the minus sign for v"). So, the quality of the sound would have a high pitch and thus be loud.

b. What is the quality of the sound of an ambulance's siren when it moves away from a stationary hearer?

Since the source (ambulance) moves away the detector, (hearer), we would get a downward shift in frequency. (Since our denominator has to be a maximum, so we use the plus sign for v"). So, the quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.

Answer:

324 J

Explanation:

KE= 1/2 m*v^2

1/2*8*9^2

324 joules (=^w^=) woof woof

Answer:

Explanation:

A withered plant. Unless the plant is one of the many plants that have huge water retention capacity, for example, cactus. Such plants also don't need water to gr6, they just need a tiny amount of water, ba sufficient sunlight to enable them complete photosynthesis.

Any other plants asides one of the many like that, he will definitely come back to a dead, or at best, withered plant. A month is too long a time to not take care of your plant and expect it to still be up and running

Answer:

some symptoms can be lack of energy, and dizziness.

Explanation:

C. Light rays are bent by the water in the glass.

Explanation:

The light defracts as is it leaves the medium of air and enters the medium of the water/glass.

The link below is to a short video that explains this concept very well.

https://youtu.be/Iq1a_KJTWJ8

Answer: 6V

Explanation:

Answer:

F = 4117.64

Explanation:

First, we will calculate the acceleration of the hand, by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration = ?

s = distance covered = compression = 8.5 cm = 0.085 m

vf = final speed = 0 m/s

vi = iniial speed = 10 m/s

Therefore,

[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]

negative sign hows deceleration.

Now, we will calculate the force exerted by the hand:

[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]

F = 4117.64 N

Answer: 0.25 m/s

Explanation:  Speed = wavelengt · frequency  

v = λf   and frequency is 1/period  f = 1/T

Then v = λ/T = 5 m / 20 s = 0.25 m/s

Answer:

The subunits of nucleic acids are also the subunits of proteins.

Explanation:

i hope this helps

Answer:

Chemical energy to heat energy to kinetic energy to electrical energy

Answer:

no i haven't done it

Explanation:

clean yo computer tho

Answer:

A

Explanation:

Answer:

Friction can be minimized by using lubricants like oil and grease and by using ball bearing between machine parts. A substance that is introduced between two surfaces in contact, to reduce friction, is called a lubricant. Fluid friction can be minimized by giving suitable shapes to the objects moving in the fluids.

Explanation:

hope it helps

Answer: the answer is c (think bc im on that too)

Explanation:

The interference is a  type of wave interaction shown in the photo. Option A is correct.

The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.

The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.

When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.

The interference is a  type of wave interaction shown in the photo

Hence option A is correct.

To learn more about the interference of waves refer to the link;

brainly.com/question/16098226

Answer:

1 ohm

Explanation:

since there are two identical resistors, one resistor will be

R = [tex]\frac{4}{2}[/tex] =2ohm [ proven as in series [tex]R_{e} = 2 + 2 = 4ohm[/tex] ]

to calculate the equivalent resistance when in parallel:

[tex]\frac{1}{R_{e} } = \frac{1}{R_{1} } + \frac{1}{R_{2}}[/tex]

so,

[tex]\frac{1}{R_{e} } = \frac{1}{2} + \frac{1}{2}[/tex]

[tex]R_{e} = 1ohm[/tex]

Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.

In a parallel circuit, voltage is thee same across each component in the circuit. The sum of the currents through each path is equal to the current from the source. However, the resistance cannot be added directly. It is calculated as:

1/Rt = 1/R1 + 1/R2 + 1/R3 1/Rt = 1/6.8 + 1/9.0 + 1/15

Rt = 3.08 ohms.

When resistors are connected in parallel, the equivalent resistance R will be less than the least resistance.

1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4 + 1/R5

Since the 5 resistors are 10 ohms each, substitute them in to the formula

1/R = 1/10 + 1/10 +1/10 + 1/10 + 1/10

The LCM = 10

1/R = 5/10

Reciprocate both sides

R = 10/5 = 2 ohms

Therefore, Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.

Learn more about equivalent resistance on:

https://brainly.com/question/13606415

#SPJ5

Answer:

gravity...................

Answer:

Hope it help you

Answer:

F = 0.0112 N

Explanation:

Given that,

Masses, [tex]m_1=m_2=6500\ kg[/tex]

The distance between masses, d = 0.5 m

We need to find the gravitational force between two large trucks. The formula for the gravitational forces is given by :

[tex]F=G\dfrac{m^2}{r^2}\\\\F=6.67\times 10^{-11}\times \dfrac{6500^2}{(0.5)^2}\\\\F=0.0112\ N[/tex]

So, the required force between masses is equal to 0.0112 N.

Answer:

Q=mc(T2-T1)

Explanation:

Ti is the temperature

m is mass

c is specific heat capacity for steam

Q is heat, [Q]=J

Answer:

1) x rays

Explanation:

Honestly Gamma rays has the Highest frequency, but in your options, gamma rays is not among, so x rays has the highest frequency among your options.

by Manshow

Answer:

The answer is (X-rays)

number 1

Answer:

head

four head

hair

eyes

ears

nose

lips

chick

chin

eyebrow

eyelid