Answer:
5.7km/h north and 5.8km/h west are instantaneous speeds, while 8.1km/h Northwest is the average speed.
An object's inertia causes it to come to a rest position.
Answer:
no
Explanation:
the inertia of an object does not make it to come to rest, this is normally caused by friction
what will be the effect on gravitational pull between two objects of medium between them is changed
Answer:
force of gravitational attraction between them also decreases.
Explanation:
force of gravitational attraction between them also decreases.
A source produces 25 waves every second. The wavelength of the waves is
50 cm. How fast will the waves be travelling?
Answer:
1 s
Explanation:
The speed of the sound, distance travelled and the time taken relationship is given as follows.
Speedofsound,v=Distancetravelled×Timetaken ----eqn 1
With the given values of wavelength = 50 cm = 0.5 m and frequency =1000 Hz, the speed of the wave is calculated as follows.
Speedofsound,v=Frequency(ν)×Wavelength(λ) -- eqn 2
That is, v=ν×λ=1000Hz×0.5m=500m/s
Substituting the value of the speed of sound in eqn 1 gives the time taken for the sound wave to travel a distance of 500 m.
That is, Timetaken=
Distancetravelled
Speedofsound
=
500m
500m/s
=1second.
Hence, the time taken for the sound wave to travel is 1 second.
The speed with which the waves will be travelling is 12.5m/s.
Given the data in the question;
Frequency; [tex]f = 25\ waves\ per\ second = 25s^{-1}[/tex]Wavelength; [tex]\lambda = 50cm = 0.5m[/tex]Speed of the wave; [tex]v =\ ?[/tex]
To determine how fast the waves will be travelling, we use the expression for the relations between wavelength, frequency and speed of wave.
[tex]\lambda = \frac{v}{f}[/tex]
Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed of wave
We substitute our values into the equation
[tex]0.5m = \frac{v}{25s^{-1}} \\\\v = 0.5m * 25s^{-1}\\\\v = 12.5ms^{-1}[/tex]
Therefore, the speed with which the waves will be travelling is 12.5m/s.
Learn more: https://brainly.com/question/14667830
Cuáles son las diferencias, con respecto al proceso de extracción y tratamiento, entre
el gas propano y el gas metano.
Answer:
la burguesía era de clase alta y en su mayoría rica. La gente de clase trabajadora generalmente trabajaba con un salario mínimo y solo tenía suficiente dinero para poner comida en la mesa. En este momento, la gente veía a los trabajadores de clase media como menos que otras personas.
Explanation:
A car was sitting in sunlight all day long. The heat that is now contained in the car was transferred to the car primarily by which of the following processes? Question 1 options: radiation conduction convection electrical energy transfer.
Can you please draw circuit diagram with 5 Ω resistor in series with bulb, switch and 12 V battery?
Answer:
Sorry for the bad drawing, as you have not specified whether is should be open switch or close I have drawn both
I hope it helps.
Alex drops a soccer ball and a table tennis ball from the top of a ladder. He wants to compare the velocities of the balls just before they hit the ground.
Which formula should Alex use to calculate the velocity of each ball,
assuming they are in free fall?
A) v=Gt
B) g=vt
C) t=vg
D) v=G/t
Answer:
d is the correct answer
Explanation:i did this math
What is the vertical component of a ball thrown at a 27 degree angle at 16 m/s?
y = y 0 + v 0 y t − 1 2 g t 2 . If we take the initial position y 0 to be zero, then the final position is y = 10 m. The initial vertical velocity is the vertical component of the initial velocity: v 0 y = v 0 sin θ 0 = ( 30.0 m / s ) sin 45 ° = 21.2 m / s .
can someone help me?
Answer:
B
Explanation:
Y won't sink because his shoes have wider area
The maximum allowable potential difference across a 250 mH inductor is 360 V . You need to raise the current through the inductor from 1.5 A to 2.5 A . What is the minimum time you should allow for changing the current?
This question involves the concepts of potential difference, inductance, and current.
The minimum time that should be allowed for the current to change is "0.694 ms".
The inductance of an inductor is given by the following formula:
[tex]E=L\frac{\Delta I}{\Delta t}\\[/tex]
where,
E = potential difference across the inductor = 360 volts
L = inductance of the inductor = 250 mH = 0.25 H
ΔI = change in current = 2.5 A - 1.5 A = 1 A
Δt = time required = ?
Therefore,
[tex]\Delta t = \frac{(0.25\ H)(1\ A)}{360\ volts}[/tex]
Δt = 6.94 x 10⁻⁴ s = 0.694 ms
Learn more about inductance here:
https://brainly.com/question/17431388?referrer=searchResults
help me out plssssssssssss
Answer:
1.b
2.c
have a good day bro
Lab report: Newton's Second Law
Answer:
Newton found the acceleration of a body to increase with force and decreases with mass
fore example : a equal force applied on two different things that one of thing is have 100kg and another have70kg but the acceleration is different because the bigger one accelerate slower than the smaller because
[tex]f = ma[/tex]
What is electromagnetic force and how does it work and what it does??
Answer:
Explanation:
The electromagnetic force, also called the Lorentz force, acts between charged particles, like negatively charged electrons and positively charged protons. Opposite charges attract one another, while like charges repel. The greater the charge, the greater the force.
it is not 132m and plzz explain how the answer is 66m
Distance = 1/2 x velocity x time
Distance = 1/2 x 0.40 x 330
Distance = 66 meters
Any vector can be expressed as the sum of two components, usually
referred to as what?
Two vectors can be added together to determine the result (or resultant). ... computing the vector sum of all the individual forces acting upon that object.
i hope u understand
Identify each of the following statements related to universal gravitation as either true or false. False The gravitational field around a planet is oriented radially outward. True Stars must be at least 2 or 3 times more massive than our sun in order to become a black hole. False Orbiting astronauts are weightless because of the absence of a support force. False The outer planets in our solar system wobble in their orbits because the gravitational effects of the sun are so small. False The earth is falling toward the sun. False As you move farther from the earth, its gravitational force acting on you increases.
The characteristics of the universal gravitation law allow finding the results for which statements are true:
2. Real stars must be at least 2 to 3 times more massive than our sun to become a black hole.
All the others are false.
The universal gravitational law states that the gravitational force is always attractive and is proportional to the masses and inversely proportional to the square of the distance.
[tex]F = - G \frac{Mm}{r^2}[/tex]
Where F is the force, G is the universal gravitational constant, M and m are the masses and r the distance between the bodies.
Let's analyze the expressions:
1. The gravitational field around a planet is oriented radically outward
False. The force is attractive therefore it is directed towards the center of the planet.
2. Real stars must be at least 2 to 3 times more massive than our sun to become a black hole.
True. From observations of super-novae the minimum mass is 3 solar masses.
3. Astronauts in orbit are weightless due to the absence of a supporting force.
False. Astronauts have no weight because the force of gravity binds to change the direction of their velocity.
4. The outer planets of our solar system wobble in their orbits because the gravitational effects of the sun are very small.
False. The attraction of the sun decreases with the square of the distance, but the wobble is due to the attraction of the other large planets in this area.
5. The earth falls towards the sun.
False. The earth has a speed parallel to the orbit around the sun and the acceleration due to the attraction of the sun changes the direction of the orbital velocity, but the earth is not directed at the sun.
6, As you move away from the ground, the gravitational force acting on you increases.
False. The gravitational force is inversely proportional to the distance, therefore it decreases when leaving the earth.
In conclusion with the characteristics of the universal gravitation law we can find which statements are true:
2. Real stars must be at least 2 to 3 times more massive than our sun to become a black hole.
All the others are false.
Learn more here: brainly.com/question/85842
A car accelerates from 20m/s to 25m/s in 4s as it passes a truck. What is the distance travelled?
Answer:
afcorse 1 miles
Explanation:
yep plz make me the brainliest
The distance travelled by car is displacement which is
What is displacement?Displacement is defined to be the change in position of an object.
[tex]s=\frac{1}{2} (v+u)t[/tex]
[tex]s=\frac{1}{2} (25+20)4\\s= 90 m[/tex]
To learn more about Displacement here
https://brainly.com/question/11934397
#SPJ2
A student pushes on an object with a force of 6 newtons and the object does not move. what force does the object exert on the student’s hands?
Answer:
6 newtons
Explanation:
If it's an equal force exerted on the student's hands, the object will not move.
If a student pushes on an object with a force of 6 newtons and the object does not move then the force exerted by the object on the student’s hands would be 6 Newtons because the applied force is equal to the static frictional force until the object does not move.
What is friction?Friction is a type of force that resists or prevents the relative motion of two physical objects when their surfaces come in contact
As given in the problem If a student pushes on an object with a force of 6 newtons and the object does not move then we have to find out the force exerted by the object on the student’s hands,
Force applied by the student of the object = 6 Newtons
The force exerted by the object on the student's hand = 6 Newtons
Thus, the force exerted by the object on the student’s hands would be 6 Newtons
Learn more about friction from here link given below;
brainly.com/question/24186853
#SPJ6
An object's _____ energy that is used to perform work is equal to its potential energy plus its kinetic energy.
The temperature of a body is measured using the resistance of a wire. To calibrate the device the following measurements were taken (ohms is the unit of electrical resistance).
Resistance in melting ice 240 ohms.
Resistance in boiling water 250 ohms.
a. What is the change in resistance for a change in temperature of 1 Degree Celcius?
b. The wire is placed into some hot water and the resistance is mesured to be 246 ohms. What is the temperature of the water?
Answer:
A)250-240
=10+960
=970
Ryan and his dad go paintball img they 700 balls each how much did paintballing cost for the two of them
Answer:
We don't know how much it cost bc u didn't give us a number of how much one person cost or any details but if you add both of the balls together they have 1,400 balls
To calculate the cost of paintballing for Ryan and his dad, we need to know the cost per paintball. Once we have that information, we can multiply it by the total number of paintballs they used (700 balls each).
Let's say the cost per paintball is $0.50.
For Ryan:
Cost for Ryan = Cost per paintball × Number of paintballs used by Ryan
Cost for Ryan = $0.50/ball × 700 balls = $350
For his dad:
Cost for Dad = Cost per paintball × Number of paintballs used by Dad
Cost for Dad = $0.50/ball × 700 balls = $350
Total cost for both of them:
Total Cost = Cost for Ryan + Cost for Dad
Total Cost = $350 + $350 = $700
So, the total cost of paintballing for Ryan and his dad is $700, assuming the cost per paintball is $0.50.
To know more about paintball:
https://brainly.com/question/19052712
#SPJ3
How much work must be done to stop a 925-kg car traveling at 95 km/h?
The amount of work done to stop the car is equal to 322,099.85 Joules.
Given the following data:
Mass = 925 kilogramsVelocity = 95 km/hConversion:
Velocity = 95 km/h = [tex]\frac{95 \times 1000}{60 \times 60} = 26.39 \;m/s^2[/tex]
To determine the amount of work done to stop the car, we would apply the work-energy theorem:
Note: The amount of work done must balance the kinetic energy possessed by the car due to its motion.
From the work-energy theorem, we have:
[tex]Work\done = \Delta K.E\\\\Work\done = \frac{1}{2} MV^2[/tex]
Substituting the given parameters into the formula, we have;
[tex]Work\;done = \frac{1}{2} \times 925 \times (26.39)^2\\\\Work\;done =462.5 \times 696.4321[/tex]
Work done = 322,099.85 Joules
Read more: https://brainly.com/question/22599382
When positive charges build up in an object, the net charge of that object becomes...
a. it stays the same
b. negative
c. positive
d. neutral
Answer:
c. postive
Explanation:
All physical objects are made up of atoms. Inside an atom are protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral.
Therefore, all things are made up of charges. Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are balanced in an object, which makes that object neutral.
Static electricity is the result of an imbalance between negative and positive charges in an object. These charges can build up on the surface of an object until they find a way to be released or discharged. One way to discharge them is through a circuit.
Hope this helps, have a nice day/night! :D
Answer:
C
Explanation:
C because if you build anything up it remains the same.
Explain how coral reefs alter the weathering and erosion of shorelines.
Answer: Coral reef structures also buffer shorelines against 97 percent of the energy from waves, storms, and floods, helping to prevent loss of life, property damage, and erosion. When reefs are damaged or destroyed, the absence of this natural barrier can increase the damage to coastal communities from normal wave action and violent storms.
Solve this anyone please fast ..!
Answer:
Explanation:
Ax= 20*sin37
Ay =20*cos37
Bx=15*cos40
By = -15*sin40
Cx = -6*cos60
Cy = -6*sin60
Answer:
Ax = 12 cos 53
Ay = 12 sin 53
Bx = 15 cos 320 = 15 cos 40
By = 15 sin 320 = -15 sin 40
Cx = 6 cos 240 = -6 cos 60
Cy = 6 sin 240 = -6 sin 60
A measuring cylinder contains 80 cm3 of a certain liquid. The liquid is poured
into an empty beaker of mass 48 g. The total mass of the beaker and the liquid
was found to be 136 g.
(a) Calculate the mass of the liquid in grams.
(b)Calculate the density of the liquid in gcm-3
Answer:
1.5 g/cm
3
Let d be the density of fluid.
So , Initial reading of balance, F
1
=30dg N
After the level reaches 50cm
3
Final reading of balance , F
2
=50dg N
Given that difference between final and initial reading is 30g
i.e, F
2
−F
1
=30 g
⟹50dg−30dg=30g
⟹20dg=30g
⟹d=
20g
30g
⟹d=1.5g/cm
3
So, density of fluid is 1.5g/cm
3
Almost all living things depend on the process of ____________________ to supply them with the energy they need.
A.
photosynthesis
B. heterotroph
Which state of matter has molecules that barely move at all?
liquid
gas
solid
They are all the same.
Answer:
the answer is solid.
Explanation:
solid particles have a definite volume and shape therefore they cannot move are they are whole. the particles of solid are closely packed together, barely move, and barely vibrate.
Physics has a number of words meaning "mathematical models". Which one does NOT fit?
Group of answer choices
Pattern
Relationship
Affair
Equation
The energy transferred per unit electric charge in a circuit is .
A current
B charge
C power
D potential difference