Krypton-85 has a half-life of 10. years Approximately what = produced from nuclear percentage of Kr-85 testing in 1956 remained radioactive in 2016? Select one: a. 3% b. 12.5% 6% d.1.6%

An aqueous solution of 0.10 mol dm-3 AlCl3 will be acidic due to the presence of hydrated Al3+ ions and the resulting formation of hydronium ions.

When an ionic compound like AlCl3 dissolves in water, it dissociates into its constituent ions according to the following reaction:

AlCl3 (s) → Al3+ (aq) + 3Cl- (aq)

The aluminum ion, Al3+, has a very high charge-to-size ratio, which makes it highly polarizing. It can distort the electron cloud of water molecules and attract them towards itself, forming a hydrated Al3+ ion:

Al3+ (aq) + 6H2O (l) → [Al(H2O)6]3+ (aq)

The resulting hydrated ion is acidic, because the Al3+ ion acts as a Lewis acid, accepting a lone pair of electrons from one of the water molecules to form a hydronium ion, H3O+:

[Al(H2O)6]3+ (aq) + H2O (l) → [Al(H2O)5OH]2+ (aq) + H3O+ (aq)

The hydronium ion is what makes the solution acidic, because it can donate a proton to a base to form water. Therefore, an aqueous solution of 0.10 mol dm-3 AlCl3 will be acidic due to the presence of hydrated Al3+ ions and the resulting formation of hydronium ions.

Learn more about acidic here:

https://brainly.com/question/29796621

#SPJ11

Ingestion of antifreeze, which primarily contains ethylene glycol, can cause severe poisoning and life-threatening complications.

When ethylene glycol is metabolized in the body, it generates toxic metabolites such as glycolic acid and oxalic acid. These metabolites can lead to symptoms including nausea, vomiting, abdominal pain, and neurological disturbances like dizziness, confusion, and seizures.

Additionally, the toxic metabolites can cause metabolic acidosis, a dangerous condition where the body's pH balance becomes acidic. This can lead to organ dysfunction, particularly affecting the kidneys. The formation of calcium oxalate crystals can result in acute kidney injury, which may progress to kidney failure if left untreated.

Treatment for ethylene glycol poisoning often involves the administration of an antidote, such as fomepizole or ethanol, which inhibits the enzyme responsible for metabolizing ethylene glycol into its toxic components. This allows the body to safely eliminate the ethylene glycol without producing harmful metabolites. Prompt medical attention is crucial to prevent severe complications and potentially fatal outcomes.

To know something about the antifreeze, click below.

https://brainly.com/question/14753001

#SPJ11

The equilibrium concentration of CO is 0.062 M, the equilibrium concentration of H2O is 0.062 M, the equilibrium concentration of CO2 is 0.068 M, and the equilibrium concentration of H2 is 0.068 M.

We are given the following balanced chemical equation:

CO(g) + H2O(g) ⇌ CO2(g) + H2(g)

The equilibrium constant is given as Kc = 102 at 500 K.

The initial concentration of CO is 0.130 M and the initial concentration of H2O is also 0.130 M.

Let x be the change in the concentration of CO, H2O, CO2, and H2 at equilibrium.

Using the stoichiometry of the balanced chemical equation, we can set up an ICE table as follows:

CO(g) H2O(g) CO2(g) H2(g)

Initial 0.130 M 0.130 M 0 M 0 M

Change -x -x +x +x

Equilibrium 0.130 M - x 0.130 M - x x x

Using the equilibrium constant expression, we can write:

Kc = [CO2][H2]/[CO][H2O]

Substituting the equilibrium concentrations from the ICE table and the given value of Kc, we get:

102 = x^2 / (0.130 - x)(0.130 - x)

Solving for x, we get x = 0.068 M.

Substituting x back into the ICE table, we get:

CO(g) H2O(g) CO2(g) H2(g)

Initial 0.130 M 0.130 M 0 M 0 M

Change -0.068 M -0.068 M +0.068 M +0.068 M

Equilibrium 0.062 M 0.062 M 0.068 M 0.068 M

Therefore, the equilibrium concentration of CO is 0.062 M, the equilibrium concentration of H2O is 0.062 M, the equilibrium concentration of CO2 is 0.068 M, and the equilibrium concentration of H2 is 0.068 M.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ11

The best electrolyte from the data that we can see in the table that have been shown is HCl.

An electrolyte is a material that conducts electricity when it is melted or dissolved in water. It is composed of ions, which are atoms or molecules with a net positive or negative charge after gaining or losing one or more electrons.

The HCl is the solution that can be seen to have the highest conductance in the list and as such that is the compound that has the highest electrolytic property.

Learn more about electrolyte:https://brainly.com/question/29045708

#SPJ1

Answer:

Initially, national security was defined as the government's ability to protect its citizens from military attacks. Today, this definition also includes other non-military areas such as defense against crime and terrorism, economic security, environmental security, food security, energy security and cyber security.

To create a buffer solution with a pH of 4.00 using 1.00 M glycolic acid and 2.00 M NaOH, we need to determine the volume of NaOH required to achieve the desired pH.

The calculation involves the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the concentration of the acid and its conjugate base.

First, we identify glycolic acid (HA) as the acid component and its conjugate base (A-) as the sodium glycolate derived from NaOH. The Henderson-Hasselbalch equation is expressed as:

pH = pKa + log([A-]/[HA])

Given that the pH is 4.00, we can determine the pKa value from the dissociation constant (Ka) of glycolic acid. The pKa of glycolic acid is approximately 3.83. By substituting the values into the Henderson-Hasselbalch equation, we can solve for the ratio of [A-]/[HA], which will allow us to find the required volume of NaOH.

In the second paragraph, we would calculate the concentration ratio [A-]/[HA] and use it to determine the volume of 2.00 M NaOH needed to achieve the desired pH.

Learn more about buffer solution here:

https://brainly.com/question/31367305

#SPJ11

The compound can be synthesized from acetylene by reacting it with hydrogen chloride to form vinyl chloride,  converted to vinyl alcohol using sodium hydroxide and finally to acetaldehyde using sodium dichromate.

In the study of chemistry, a substance or compound that is given to a system in order to initiate a chemical reaction or is added to determine whether or not a reaction has already happened is referred to as a reagent. In order to confirm the existence of another medication, a comparable response is required inorganic reagent.

One of the Reagents

The Grignard reagent, the Tollens reagent, the Fehling reagent, the Millon reagent, the Collins reagent, and the Fenton reagent are examples of reagents. The term "reagent" does not, however, appear in the names of all reagents. Reagents include things like solvents, enzymes, and catalysts. Reagents may also be limiting.

To synthesize the compound from acetylene, we can use the following reaction:
Acetylene + Hydrogen chloride --> Vinyl chloride
We can then use the vinyl chloride to synthesize the compound using the following reactions:
Vinyl chloride + Sodium hydroxide --> Vinyl alcohol
Vinyl alcohol + Sodium dichromate --> Acetaldehyde

Learn more about inorganic reagent here

https://brainly.com/question/29641378

#SPJ11

When, a 0.163-g of sample of an unknown pure gas will occupy a volume of 0.125 L at pressure of 1.00 atm and the temperature of 100.0 °C. Then ,the unknown gas is neon. Option C is correct.

To solve this problem, we use the ideal gas law, PV = nRT, where P is pressure, V is volume, n is number of moles, R is gas constant, and T is temperature in Kelvin. First, we convert the temperature from Celsius to Kelvin;

T = 100.0 °C + 273.15 = 373.15 K

Next, we rearrange the ideal gas law to solve for number of moles;

n = PV/RT

Plugging in the given values, we get;

n = (1.00 atm)(0.125 L)/(0.08206 L·atm/mol·K)(373.15 K)

= 0.00489 mol

Now we can use the molar mass of each gas to determine which one has a mass of 0.163 g for 0.00489 mol.

For helium (He);

molar mass = 4.003 g/mol

mass of 0.00489 mol = 0.0196 g

For argon (Ar);

molar mass = 39.948 g/mol

mass of 0.00489 mol = 0.195 g

For neon (Ne);

molar mass = 20.180 g/mol

mass of 0.00489 mol = 0.0985 g

For krypton (Kr);

molar mass = 83.798 g/mol

mass of 0.00489 mol = 0.409 g

For xenon (Xe);

molar mass = 131.293 g/mol

mass of 0.00489 mol = 0.642 g

Therefore, the unknown gas is neon (Ne), which has a molar mass of 20.180 g/mol.

Hence, C. is the correct option.

To know more about neon here

https://brainly.com/question/7388072

#SPJ4

--The given question is incomplete, the complete question is

"A 0.163-g sample of an unknown pure gas occupies a volume of 0.125 L at a pressure of 1.00 atm and a temperature of 100.0 °C. The unknown gas is __________. A) helium B) argon C) neon D) krypton E) xenon."--

a)Approximately 1.54 x 10^15 carbon atoms.

B) Approximately 1.54 x 10^15 carbon atoms were deposited on the line.

(a) The number of carbon atoms deposited:

To estimate the number of carbon atoms deposited, we need to calculate the volume of graphite deposited on the line.

The volume can be calculated using the formula:

Volume = Length x Width x Thickness

Given:

Length = 10 cm = 10 x 10^(-2) m (converted to meters)

Width = 0.5 mm = 0.5 x 10^(-3) m (converted to meters)

Thickness = 710 nm = 710 x 10^(-9) m (converted to meters)

Using these values, we can calculate the volume:

Volume = (10 x 10^(-2) m) x (0.5 x 10^(-3) m) x (710 x 10^(-9) m)

= 3.55 x 10^(-12) m^3

Now, we need to calculate the number of carbon atoms based on the density of graphite and the atomic mass of carbon.

The density of graphite is approximately 2.26 g/cm^3, which can be converted to kg/m^3:

Density = 2.26 g/cm^3 = 2.26 x 10^3 kg/m^3

The atomic mass of carbon is approximately 12 g/mol, which can be converted to kg:

Atomic mass of carbon = 12 g/mol

= 12 x 10^(-3) kg/mol

Next, we can calculate the mass of graphite deposited:

Mass = Volume x Density

= 3.55 x 10^(-12) m^3 x 2.26 x 10^3 kg/m^3

= 8.01 x 10^(-9) kg

Now, we can calculate the number of moles of carbon atoms:

Number of moles = Mass / Atomic mass of carbon

= (8.01 x 10^(-9) kg) / (12 x 10^(-3) kg/mol)

= 6.675 x 10^(-7) mol

Finally, we can calculate the number of carbon atoms:

Number of carbon atoms = Number of moles x Avogadro's number

= (6.675 x 10^(-7) mol) x (6.022 x 10^(23) mol^(-1))

= 1.54 x 10^15 carbon atoms

Approximately 1.54 x 10^15 carbon atoms were deposited on the line.

To know more about atoms, visit;

https://brainly.com/question/6258301

#SPJ11

The Ksp value for CuI is 4 x 10⁻¹², indicating its solubility product constant.

To determine the solubility product constant (Ksp) for CuI (copper(I) iodide) based on its solubility, we need to know the balanced equation for its dissolution.

The balanced equation for the dissolution of CuI is:

CuI(s) ⇌ Cu⁺(aq) + I⁻(aq)

From the equation, we can see that one mole of CuI dissociates into one mole of Cu⁺ ions and one mole of I⁻ ions. Therefore, the expression for the solubility product constant is:

Ksp = [Cu⁺][I⁻]

Since the solubility of CuI is given as 2 x 10⁻⁶ M, we can assume that the concentration of both Cu⁺ and I⁻ ions is also 2 x 10⁻⁶ M.

Substituting the values into the expression for Ksp, we get:

Ksp = (2 x 10⁻⁶) * (2 x 10⁻⁶) = 4 x 10⁻¹²

Therefore, the solubility product constant (Ksp) for CuI is 4 x 10⁻¹².

Learn more about solubility product constant

brainly.com/question/9336042

#SPJ11

According to the given information the correct answer is Th-227 undergoes alpha decay to produce the daughter nucleus (nuclide) ^{223}_{90}Th.

When Th227 undergoes alpha decay, it produces a daughter nucleus (nuclide) of Ra223. Therefore, the daughter nucleus can be represented as ^{223}_{88}Ra. When Th-227 undergoes alpha decay, it emits an alpha particle, which consists of 2 protons and 2 neutrons. The daughter nucleus (nuclide) produced is:
Daughter nucleus (nuclide): ^{223}_{90}Th.

Alpha decay is a type of radioactive decay in which an atomic nucleus emits an alpha particle, which consists of two protons and two neutrons bound together into a particle identical to a helium nucleus. This process reduces the atomic number of the nucleus by two and the atomic mass by four.During alpha decay, the nucleus undergoes a spontaneous transformation into a daughter nucleus with a smaller atomic number and mass, and the released alpha particle carries away a considerable amount of energy, which is released in the form of kinetic energy. The energy released during alpha decay is derived from the difference in the binding energy of the parent and daughter nuclei.Alpha decay occurs primarily in heavy, unstable nuclei that have an excess of protons or neutrons, making them prone to undergo decay. It is an important process in the formation of elements in the universe and is used in nuclear physics and medicine to produce and study alpha particles. Alpha decay can also pose a health hazard if a radioactive substance emitting alpha particles is ingested or inhaled, as the particles can damage or kill nearby cells.

To know more about alpha decay visit:

https://brainly.com/question/27870937

#SPJ11

The half-life of the material is approximately 3.00 days.

In the given scenario, we are given that the number of radioactive nuclei decreases to one-eighth of the initial amount in 9.00 days. We'll use the half-life formula to determine the half-life of the material.

The half-life formula is;

N(t) = N0 * (1/2)^(t/T)

where N(t) is the number of radioactive nuclei at time t, N0 is the initial number of nuclei, t is the elapsed time, and T is the half-life.

We're given that N(t)/N0 = 1/8 and t = 9.00 days, we need to solve for T.

1/8 = (1/2)^(9/T)

To solve for T, take the logarithm of both sides:

log(1/8) = (9/T) * log(1/2)

Now, isolate T:

T = 9 * log(1/2) / log(1/8)

Calculating T gives us:

T ≈ 3.00 days

To know something about the radioactive decay, click below.

https://brainly.com/question/28589207

#SPJ11

The amount of mass of nitrogen gas in a 7.00 L container at a pressure of 878.40 mmHg at 74.30°C is 7.97g.

The mass of a gas can be calculated by multiplying the number of moles in the substance by its molar mass.

According to this question, a sample of nitrogen gas is in a 7.00 L container at a pressure of 878.40 mmHg at 74.30°C. The number of moles of the gas can be calculated as follows:

PV = nRT

Where;

1.16 × 7 = n × 0.0821 × 347.3

8.12 = 28.51n

n = 0.285 moles

Mass of nitrogen gas = 0.285 mol × 28g/mol

Mass of gas = 7.97 g

Learn more about mass of a gas at: https://brainly.com/question/30997796

#SPJ1

The stack contains 5 sheets. The problem describes a stack of polarizing sheets, where each sheet is rotated 14∘ with respect to the previous sheet. The stack passes 37% of incident unpolarized light. We need to find the number of sheets in the stack.


Let's assume that the first sheet is aligned with the vertical axis. Therefore, the transmission axis of the second sheet will be at 14∘ with respect to the vertical axis. Similarly, the transmission axis of the third sheet will be at 28∘ (14∘ + 14∘) with respect to the vertical axis, and so on.
The intensity of light transmitted by each sheet is given by Malus' law: I = I₀cos²θ, where I₀ is the intensity of incident light and θ is the angle between the transmission axis and the plane of polarization of incident light.
Since the incident light is unpolarized, we need to average the intensities over all possible directions of polarization. This gives:
I_average = (1/2) I₀ cos²(0∘) + (1/2) I₀ cos²(90∘) = (1/2) I₀
The intensity of light transmitted by the stack of sheets is given by:
I_transmitted = I_average cos²14∘ cos²28∘ ... cos²θₙ
where θₙ is the angle of the transmission axis of the nth sheet with respect to the vertical axis.
We are given that the stack transmits 37% of incident light, i.e., I_transmitted = 0.37 I₀.
Substituting the values in the above equation and solving for n, we get:
n = 5 sheets
Therefore, the stack contains 5 sheets.

To know more about polarizing sheets visit :

https://brainly.com/question/31594635

#SPJ11

If not all of the [tex]SCN^{-}[/tex] was converted completely to [tex]FeNCS^{2+][/tex] when the calibration curve was prepared, this would lower the value of equilibrium constant  (Keq) .

The equilibrium constant (Keq) represents the ratio of the concentration of products to the concentration of reactants when a reaction is at equilibrium. In this case, the reaction is:
[tex]Fe^{3}+ + SCN^{-}=  FeNCS^{2+}[/tex]
When preparing the calibration curve, if some [tex]SCN^{-}[/tex] is not converted to [tex]FeNCS^{2+][/tex] , it means that there is a higher concentration of reactants ([tex]Fe^{3+}[/tex] and [tex]SCN^{-}[/tex]) and a lower concentration of the product ([tex]FeNCS^{2+][/tex]) at equilibrium.

Since Keq is defined as the ratio of the concentration of products to the concentration of reactants, a higher concentration of reactants and lower concentration of products would result in a lower value of Keq.
Incomplete conversion of [tex]SCN^{-}[/tex] to [tex]FeNCS^{2+][/tex] when preparing the calibration curve leads to a lower value of Keq due to the higher concentration of reactants and lower concentration of products at equilibrium.

For more information on equilibrium constant kindly visit to

https://brainly.com/question/31603253

#SPJ11

When managing a patient with shock, Start enteral nutrition within the first 24 hours.Wait until the patient recovers to start with enteral nutrition is appropriate actions should the nurse take as part of nutritional therapy .

When managing a patient with shock, appropriate actions that a nurse should take as part of nutritional therapy include starting enteral nutrition within the first 24 hours, starting a slow continuous drip of small amounts of enteral feedings, and planning enteral feeding to meet at least 50 percent of calorie requirements.

Starting enteral nutrition within the first 24 hours is important to provide adequate nutrition and prevent further complications. A slow continuous drip of small amounts of enteral feedings can also help prevent further complications such as aspiration or diarrhea. Planning enteral feeding to meet at least 50 percent of calorie requirements is important to ensure that the patient receives enough nutrition to promote healing and recovery.

It is important to note that starting parenteral nutrition should only be considered if enteral feedings are contraindicated, such as in cases of severe gastrointestinal dysfunction or obstruction. Waiting until the patient recovers to start with enteral nutrition may delay recovery and increase the risk of complications.

Learn more about patients here,

https://brainly.com/question/29833207

#SPJ11

The expected temperature of the vapor is 569 K.

n = m/M

where n is the number of moles, m is the mass, and M is the molar mass.

n = 3.573 g / 72.01 g/mol = 0.0496 mol

Next, we can calculate the volume of the vapor using the volume of the flask:

V = 3.049 L

Now we can rearrange the ideal gas law to solve for the temperature:

T = PV/nR

Plugging in the values:

T = (1.000 atm) x (3.049 L) / (0.0496 mol x 0.0821 L·atm/mol·K)

T = 569 K

Temperature is a measure of the average kinetic energy of the particles in a substance. In chemistry, temperature plays a crucial role in determining the behavior of chemical reactions, physical changes, and phase transitions. As temperature increases, the kinetic energy of the particles in a substance also increases, leading to an increase in the rate of chemical reactions and a decrease in the viscosity of liquids.

The standard unit of temperature in chemistry is Kelvin (K), although Celsius (°C) and Fahrenheit (°F) are also used. The Kelvin scale is based on the absolute zero point, which is the theoretical temperature at which all molecular motion stops. In contrast, the Celsius and Fahrenheit scales are based on the freezing and boiling points of water at standard pressure, respectively.

To know more about Temperature refer to-

brainly.com/question/12085369

#SPJ4

50 mL of water and 50 mL of ice have the same volume. However, the weight of water and ice will be different because the density of ice is less than the density of water.

When water freezes and turns into ice, it expands, causing the same volume of water to occupy a larger space as ice.

The density of water is approximately 1 gram per milliliter (g/mL), while the density of ice is about 0.92 g/mL. Therefore, for the same volume of 50 mL:

Weight of 50 mL of water = Volume × Density = 50 mL × 1 g/mL = 50 grams

Weight of 50 mL of ice = Volume × Density = 50 mL × 0.92 g/mL = 46 grams Hence, 50 mL of water weighs more (50 grams) compared to 50 mL of ice (46 grams) due to the difference in density between water and ice.

Learn more about weight of water and ice here:

https://brainly.com/question/28751353

#SPJ11

To solve this problem, we can use the following formula for the work done during an isothermal and reversible process:

W = -nRT ln(V2/V1)

where W is the work done, n is the number of moles of gas, R is the gas constant, T is the temperature, and V1 and V2 are the initial and final volumes of the gas, respectively.

We are given that one mole of ideal gas is compressed usothermally and reversibly at 607 K from 5.60 atm. We can convert the pressure to SI units (Pascals) using the conversion factor 1 atm = 101,325 Pa:

P1 = 5.60 atm = 5.60 x 101,325 Pa = 566,268 Pa

We are not given the final volume of the gas, so we cannot calculate the work done directly using the formula above. However, we are also given two values for the specific heat capacity of the gas: 2.34 J/K and 52.34 J/K. This suggests that the gas is not a simple monoatomic gas, but rather a more complex gas that undergoes a change in specific heat capacity during the compression process. Therefore, we need to use a more general formula for the work done:

W = -∫P1^P2 V dP

where P1 and P2 are the initial and final pressures of the gas, respectively, and V is the volume of the gas as a function of pressure.

Since the process is reversible, we can assume that the gas follows the ideal gas law:

PV = nRT

or

V = nRT/P

Substituting this expression for V into the formula for work, we get:

W = -∫P1^P2 nRT/P dP

W = -nRT ∫P1^P2 1/P dP

W = -nRT ln(P2/P1)

where we have used the fact that the integral of 1/x is ln(x).

We can convert the final pressure to SI units using the same conversion factor as before:

P2 = 3.85 atm = 3.85 x 101,325 Pa = 390,196 Pa

Substituting the given values into the formula for work, we get:

W = -(1 mol)(8.31 J/mol·K)(607 K) ln(390,196 Pa/566,268 Pa)

W = -27,452 J

Therefore, the work done during the compression of one mole of ideal gas at 607 K from 5.60 atm to 3.85 atm is -27,452 J.

For more question like ideal gas visit the link below:

https://brainly.com/question/31463642

#SPJ11

The percent dissociation of HF in the solution is 8.3%.

We can start by using the freezing point depression equation:

ΔTf = Kf × m

where ΔTf is the change in freezing point, Kf is the freezing point depression constant (in units of degrees Celsius per molality), and m is the molality of the solution (in units of moles of solute per kilogram of solvent).

Given that the freezing point depression is ΔTf = -0.198°C and the molality of the solution is 0.10 m, we can solve for Kf:

Kf = ΔTf / m = (-0.198°C) / (0.10 m) = -1.98°C/m

The next step is to use the Kf value to find the moles of solute that are dissociated. We can assume that the concentration of HF that has dissociated is x, so the concentration of undissociated HF is (0.10 - x). This means that the molality of HF in the solution is:

m = x / (0.010 kg of water) = 100 x / 18 g of water

where we have used the fact that the density of water is approximately 1 g/mL and the mass of 1 L of water is approximately 1000 g.

Now we can use the equilibrium expression for the dissociation of HF to write:

Ka = [H+] [F-] / [HF] = x^2 / (0.10 - x)

At equilibrium, the concentration of HF that has dissociated is equal to the concentration of H+ and F- ions produced. We can assume that x is small compared to 0.10, so we can approximate (0.10 - x) as 0.10. With this approximation, we can solve for x:

x^2 = Ka × (0.10 - x) = (6.8 × 10^-4) × 0.10 - (6.8 × 10^-4) x

x^2 + (6.8 × 10^-4) x - (6.8 × 10^-5) = 0

Using the quadratic formula, we get:

x = [-b ± sqrt(b^2 - 4ac)] / (2a)

where a = 1, b = 6.8 × 10^-4, and c = -6.8 × 10^-5. The positive root of this equation is:

x = 0.0083

This means that 0.0083 moles of HF dissociate in 1 kg of water. The percent dissociation is then:

percent dissociation = (moles of HF dissociated / initial moles of HF) × 100%

= (0.0083 / 0.10) × 100%

= 8.3%

For more question on percent dissociation click on

https://brainly.com/question/30445997

#SPJ11

Net ionic equation: PO4³⁻ + H2O → OH⁻ + HPO4²⁻ (for 12.23 PH)

Net ionic equation: Cu²⁺ + 2H2O → 2H⁺ + Cu(OH)2 ( for 4.82 PH)

Net ionic equation: CO3²⁻ + H2O → 2OH⁻ + HCO³⁻ ( for 9.10 PH )

Net ionic equation: Al³⁺ + 3H2O → 3H⁺ + Al(OH)3 ( for 2.36 PH )

To determine the net ionic equation for the reaction responsible for the acidity or basicity of each salt solution, we need to identify the ions that react with water to produce acidic or basic conditions. Here are the net ionic equations for each salt solution:

   0.10M Na3PO4 (pH = 12.32):

   Na3PO4 dissociates into Na⁺ and PO4³⁻ ions. The PO4³⁻ ion can react with water to produce OH⁻ ions, making the solution basic.

0.10M CuSO4 (pH = 4.82):

CuSO4 dissociates into Cu²⁺ and SO4²⁻ ions. The Cu²⁺ ion can react with water to produce H⁺ ions, making the solution acidic.

0.10M Na2CO3 (pH = 9.10):

Na2CO3 dissociates into Na+ and CO3²⁻ ions. The CO3²⁻ ion can react with water to produce OH⁻ ions, making the solution basic.

0.10M Al(NO3)3 (pH = 2.36):

Al(NO3)3 dissociates into Al³⁺ and NO³⁻ ions. The Al³⁺ ion can react with water to produce H⁺ ions, making the solution acidic.

To know more about ionic equation visit :

https://brainly.com/question/13887096

#SPJ4

To calculate the total mass of urea necessary to react completely with the NO formed during 8.4 hours of driving, we need to follow these steps:

Calculate the moles of NO in the exhaust stream:

PV = nRT

n = PV/RT

where P is the partial pressure of NO, V is the flow rate of the exhaust stream, R is the gas constant, and T is the temperature in kelvin.

Plugging in the values, we get:

n = (13.5 torr / 760 torr/atm) * (2.60 L/s) / (0.0821 L atm/mol K * 666 K) = 0.00131 mol/s

Multiplying by the number of seconds in 8.4 hours, we get:

n = 0.00131 mol/s * 8.4 hours * 3600 s/hour = 38.8 mol

Use the stoichiometry of the reaction to calculate the moles of urea required to react with the moles of NO:

From the balanced equation, we see that 4 moles of NO react with 2 moles of urea. Therefore,

4 mol NO : 2 mol urea :: 38.8 mol NO : x

x = 19.4 mol urea

Calculate the mass of urea required:

The molar mass of urea is 60.06 g/mol.

Mass of urea = moles of urea * molar mass of urea

= 19.4 mol * 60.06 g/mol

= 1167 g

Therefore, the total mass of urea necessary to react completely with the NO formed during 8.4 hours of driving is 1167 g (rounded to two significant figures).

Learn more about total mass here:

https://brainly.com/question/17552181

#SPJ11

The balanced chemical equation for the combustion of ethane (C2H6) with oxygen (O2) to form carbon dioxide (CO2) and water (H2O) is:

C2H6(g) + 7/2 O2(g) → 2 CO2(g) + 3 H2O(g)

The coefficients in the balanced equation are:

C2H6(g) has a coefficient of 1

O2(g) has a coefficient of 7/2

CO2(g) has a coefficient of 2

H2O(g) has a coefficient of 3

Note that the coefficient for O2 is not an integer. This is because the equation requires 3.5 molecules of O2 to react with 1 molecule of C2H6. To balance the equation, we multiply all coefficients by 2 to get rid of the fractional coefficient for O2:

2 C2H6(g) + 7 O2(g) → 4 CO2(g) + 6 H2O(g)

This equation is now balanced with all integer coefficients.

Learn more about  (C2H6) here:

https://brainly.com/question/16543530

#SPJ11

If an aqueous solution of nacl freezes at -3.0°c, the solution will boil at 100.838 °C.

When a non-volatile solute, such as NaCl, is added to a solvent, such as water, the boiling point of the solution increases and the freezing point decreases. This phenomenon is known as boiling point elevation and freezing point depression, respectively.

The extent of the change in boiling point or freezing point depends on the molality of the solution and the properties of the solvent.

In this problem, we are given that the aqueous solution of NaCl freezes at -3.0 °C. This means that the freezing point depression, ΔTf, is:

ΔT = T, pure solvent - T, solution

ΔT = 0 - (-3.0)

ΔT = 3.0 °C

Using the equation for freezing point depression, we can find the molality of the solution:

ΔT = K x molality

where K is the freezing point depression constant for water, which is 1.86 °C/m.

Therefore,

3.0 = 1.86 x molality

molality = 3.0/1.86

molality = 1.61 m

Next, we can use the equation for boiling point elevation to find the boiling point elevation, ΔT₁:

ΔT₁ = K₁ x molality

where K₁ is the boiling point elevation constant for water, which is 0.52 °C/m.

Therefore,

ΔT₁ = 0.52 x 1.61

ΔT₁ = 0.838 °C

Finally, we can find the boiling point of the solution by adding the boiling point elevation to the boiling point of pure water, which is 100 °C:

T₁ = 100 + ΔT₁

T₁ = 100 + 0.838

T₁ = 100.838 °C

To learn more about temperature click on,

https://brainly.com/question/30734647

#SPJ4

The correct option is C, The isotope that, when bombarded with bismuth-209, would yield two neutrons and an isotope with atomic number 121 and mass number 299 is Pb-211.

The mass number in chemistry is the total number of protons and neutrons in the nucleus of an atom. It is represented by the letter A and is usually written as a superscript before the symbol of the chemical element. The mass number of an atom determines its atomic mass and is an important factor in determining its chemical properties.

The number of protons in the nucleus of an atom is called the atomic number and is represented by the letter Z. The difference between the mass number and the atomic number gives the number of neutrons in the nucleus of an atom. Therefore, the mass number is equal to the sum of the number of protons and neutrons in the nucleus.

To know more about Mass number refer to-

brainly.com/question/18803094

#SPJ4

The order of decreasing electronegativity is P > Ni > Mn > Na.

The electronegativity of an element refers to its ability to attract electrons towards itself in a covalent bond. The higher the electronegativity value, the more strongly an atom attracts electrons. The electronegativity of an element is influenced by factors such as the number of valence electrons and the atomic radius.
In this question, we are asked to rank the elements P, Ni, Mn, and Na in order of decreasing electronegativity. The trend for electronegativity generally increases from left to right across a period and decreases from top to bottom in a group in the periodic table.
Therefore, the most electronegative element among these four is P (Phosphorus) since it is located towards the right of the periodic table. The next most electronegative element is Ni (Nickel), followed by Mn (Manganese) and finally Na (Sodium) which is the least electronegative of the four elements.
So the order of decreasing electronegativity is P > Ni > Mn > Na.

learn more about electronegativity

https://brainly.com/question/29597673

#SPJ11

The product formed from the single oxidation of tertiary alcohol is a ketone.

In this process, the tertiary alcohol undergoes an oxidation reaction, where it loses a hydrogen atom and forms a carbon-oxygen double bond.

The resulting compound is a ketone, characterized by having the carbonyl functional group (C=O) attached to two carbon atoms.

This oxidation reaction typically requires a strong oxidizing agent, such as potassium permanganate (KMnO4) or chromic acid (H2CrO4).

It's important to note that tertiary alcohols are more resistant to oxidation compared to primary and secondary alcohols due to steric hindrance and the absence of hydrogen atoms directly bonded to the carbon bearing the hydroxyl group.

To know something about oxidation, click below.

https://brainly.com/question/13182308

#SPJ11

Answer:

The direction of the force.

Explanation:

You can unplug this drain without physically touching the blockage by doing the following; Use a drain cleaner that releases energy. Option B

Drain cleaners normally contain chemicals that react with the materials causing the clog which is grease in this scenario.

The reaction that occurs will release energy in the form of heat. The heat can help to dissolve or break down the clog, allowing it to be flushed away.

A common ingredent in many drain cleaners is sodium hydroxide. This chemical will reacts with grease and other organic matter to produce soap-like compounds that can disolve in water.

Find more exercises on drain cleaner;

https://brainly.com/question/15552903

#SPJ1

Here's the balanced nuclear equation for the given scenario:
^131I -> ^131Xe + e^-

In this equation, the parent nuclide iodine-131 (denoted as ^131I) undergoes beta decay by emitting a beta particle (e^-) and converting into a daughter nuclide xenon-131 (denoted as ^131Xe). The beta particle is simply an electron that is emitted from the nucleus during the decay process.
It's important to note that the mass number (the sum of protons and neutrons) is conserved on both sides of the equation, as is the atomic number (the number of protons). This means that the atomic mass of the parent nuclide is equal to the sum of the atomic mass of the daughter nuclide and the beta particle. Additionally, the atomic number of the parent nuclide is one more than the atomic number of the daughter nuclide, since a neutron has converted into a proton during the beta decay.

learn more about equation

https://brainly.com/question/28294176

#SPJ11