Complete question is;
Lamar writes several equations trying to better understand potential energy. What conclusion is best supported by Lamar’s work?
A) The elastic potential energy is the same for any distance from a reference point.
B) The gravitational potential energy equals the work needed to lift the object.
C) The gravitational potential energy is the same for any distance from a reference point.
D) The elastic potential energy equals the work needed to stretch the object
Answer:
B) The gravitational potential energy equals the work needed to lift the object.
Explanation:
In physics, we know that potential energy is the energy of a body at rest while the energy of a body in motion is known as kinetic energy.
However,the work required to lift a body from it's position of rest is equal to the Gravitational potential energy of that body.
Elastic potential energy is the one that is stored as a result of force applied to deform an elastic object. Thus, it is not equal to the work needed to stretch the object and it is also not the same for any distance from reference point.
Thus, looking at the options, Option B is correct
What geologic process creates an alcove?
Group of answer choices
A. wind erosion
B.glaciation
C.tectonic uplift
D.coastal erosion
HELP PLEASE!!!!!!!!!!!!!!!
A 2kg rock is dropped from a height of 10m and hits the ground going 11m/s. How much work was done by air resistance as it fell?
Answer: 0.24 kg/m
Explanation: use k = ρ * A * C / 2 as the formulahow do you find the focal length of an lens experimentally
Answer:
Place the convex lens on a 'V' stand. . ii) Light a candle and take it far away from the lens along the principal axis. iii) Adjust the screen on the other side of the lens to get a clear image on it. iv) Measure the distance between the 'V' stand and the screen which gives a rough idea of the focal length of the lens.
work and power!!
____is the measure of how much work, energy, or power is used or converted properly. Efficiency C Power b Newton d. Horsepower
Answer:
Efficiency
Explanation:
A particle was moving in a straight line at 172.8 km/hr. If it decelerated over 120 meters to come to rest, find the time taken to cover this distance.
Answer:
v=s/t
s=vt
t=s/v
t=(120×10‐³)/172.8
(the distance meters has been changed to kilometres)
t=1/1440 hrs
Given ,
Hey guys, can you please help me with this question?
A rectangular container of base 50 cm by 30 cm is filled with water to a depth of 5 cm. How much is the pressure exerted at the base? (Take p= 1000 kg/m3 and g=10m/s)
Answer:
the pressure exerted at the base of the container is 490 N/m²
Explanation:
Given;
density of water, ρ = 1,000 kg/m³
base of the rectangular container, = 50 cm by 30 cm
height of water in the tank, h = 5 cm = 0.05 m
The pressure exerted at the base of the container is calculated as;
P = ρgh
where;
g is acceleration due to gravity = 9.8 m/s²
P = 1000 x 9.8 x 0.05
P = 490 N/m²
Therefore, the pressure exerted at the base of the container is 490 N/m²
What is the unit of energy called? (Give name and symbol)
If a scientist is designing a device to create high energy electromagnetic waves, which type of wave would the device most likely create?
А
microwaves
B
infrared waves
с
ultraviolet waves
D
gamma ray waves
Una muestra de agua de 250g de agua se caliento desde 10°C hasta 60°C calcula la cantidad de calor absorbido por el agua el calor especifico del agua es de 4186J/Kj.K
Answer:
Calor absorbido, Q = 52325 Joules
Explanation:
Dados los siguientes datos;
Masa = 250g to kg = 250/1000 = 0.25kg
Temperatura inicial, T1 = 10°C to Kelvin = 273 + 10 = 283K
Temperatura final, T2 = 60°C to Kelvin = 273 + 60 = 333K
Capacidad calorífica específica = 4186 j/kg.K.
Para encontrar la cantidad de calor necesaria;
La capacidad calorífica viene dada por la fórmula;
[tex] Q = mct [/tex]
Dónde;
Q representa la capacidad calorífica o la cantidad de calor.
m representa la masa de un objeto.
c representa la capacidad calorífica específica del agua.
dt representa el cambio de temperatura.
dt = T2 - T1
dt = 333 - 283
dt = 50 K
Sustituyendo en la fórmula, tenemos;
[tex] Q = 0.25*4186*50[/tex]
[tex] Q = 52325 [/tex]
Calor absorbido, Q = 52325 Joules
What does the diagram show about phases and the phase of the substance as it is heated? Check all that apply.
(ANSWERED)
The substance is a gas at more than 2,000°C.
The particles are close together but move in different directions between 0°C and 2,200°C.
The attractions between the particles increase in region 2.
The speed of the particles increases in region 5.
The substance does not exist as a solid.
(the answer is B and D) got a 100
Answer:
2 and 4
Explanation:
right on edge
Answer:
can confirm its 2 and 4
Explanation:
What causes "changing" motion?
Balanced forces
Unbalanced Forces
Steady Motion
The force
Answer:listen to class
Explanation:
-1
Answer:
Unbalanced Forces
Explanation:
According to the Newton's First law, it states that an object either remains at rest or continues to move at a constant velocity, unless it is acted upon by an external force. The answer is Unbalanced Forces
What is the relationship between retar ding potential and the kinetic energy of the emitted photoelectrons?
Answer:
The kinetic energy of photoelectrons at the surface grows linearly with the increasing frequency of incident radiation. Measurements for all metal surfaces give linear plots with one slope.
Giving Brainliest
Please help, Stay Safe and healthy
Answer: A I think
Explanation:
6. _______________ : when a certain number of waves pass a given point for a certain number of seconds? Group of answer choices A. wavelength C. amplitude D. height B. frequency
Ill give brainly-ist.
Answer:
b
kakanandnanjsnMajdnAnnznnzkkzid
Answer:
Frequency
Explanation:
I just took that test
The tuning fork has a frequency of 426.7 is found to cause resonance in a closed column of air measuring 0.186 (the diameter of the tube is 0.015m) find the velocity of the sound produced by the tuning fork.
Answer:
The velocity of the tuning fork sound is 317.4648 m/s
Explanation:
The given parameters are;
The frequency of the fork, f = 426.7 Hz
The length of the closed air column, L = 0.186 m
The diameter of the tube, d = 0.15 m
At the fundamental frequency in a closed tube, we have;
λ = 4·L
Where;
λ = The wavelength of the wave
L = The length of the tube
From the equation for the velocity of a wave, we have;
v = f·λ
Where;
v = The velocity of the (sound) wave
f = The frequency of the wave = 426.7 Hz
λ = 4·L = 4 × 0.186 m = 0.744 m
∴ v = 426.7 Hz × 0.744 m = 317.4648 m/s
Therefore, the velocity of the sound produced by the tuning fork, v = 317.4648 m/s
A wave with a wavelength of 4.0 m has a frequency of 2 Hz. Calculate the speed of this wave.
O 2 m/s
O 8 m/s
O 6 m/s
O 0.5 m/s
Answer:
8m/s
Explanation:
because frequency×wavelength
What is the amount of work required to increase a 1100 kg car's speed from 20.0 m/s to 30.0 m/s?
Answer:
250,000 im not really sure about this answer but this is what I got
The amount of work required to increase the speed of the car is 275000 J.
To calculate the amount of work required to increase the speed of the car, we use the formula below.
Formula:
W = m(v²-u²)/2................ Equation 1Where:
W = amount of work needed to increase the speed of the carm = mass of the caru = initial speed of the carv = final speed of the car.
From the question,
Given:
m = 1100 kgu = 20 m/sv = 30 m/sSubstitute these values into equation 1
W = 1100(30²-20²)/2W = 1100(900-400)/2W = 1100(500)/2W = 1100×500/2W = 275000 JHence, The amount of work required to increase the speed of the car is 275000 J.
Learn more about work here: https://brainly.com/question/18762601
Please help!!! what is the main point of paragraph 3?
A silver tea spoon is placed in a cup filled with hot tea. After some time, the exposed end of the spoon becomes hot even without a
direct contact with the liquid. This phenomenon can be explained by:
Answer:
As atoms in the spoon vibrates about their equilibrium positions and transfer energy form one end to other end. This process is called conduction.
Some people today claim the Earth is flat. Produce an argument to prove that the
Earth is not flat.
Answer:
i mean i think it is. we have no real pics of the earth they are all fake. And the moon landing was fake. the usa flag was blowing but there is no wind in space . its all fake
Explanation:
please help meeee, I need help to complete my assignment
Does an object of a higher mass absorb more thermal energy than an object of lower mass?
a) A 12 kg object has a velocity of 37.5 m/s. What is its momentum?
b) How far does it get in 16 s?
Answer:
The answer would be 450 m kg/s
Explanation/ Explanation / Example:
Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity you should take the following steps: Change minutes into seconds (so that the final result would be in meters per second). 3 minutes = 3 * 60 = 180 seconds , Divide the distance by time: velocity = 500 / 180 = 2.77 m/s .
If this doesn't help let me know!
If I keep F constant in F=ma, what is the relationship between m and a?
Answer:
If F is a constant, we can take f = 1
f = m×a
ma = 1
therefore we can say that force is hence proportinal to the product of mass and acceleration.
why the friction between an object and a surface is less than when the surface is titled than when the same surface is horizontal
Answer:
nvjch
ffufuxuhxjcjfbfdhdh
A car goes East from 2 m/s to 16m/s in 3.5s. What is the Car's acceleration?
To drive your car from Auburn to Atlanta (173.8 km) takes a significant amount of work. Assuming the force of friction between the tires and the road is 10290 N, how much work needed to drive that far? Express your answer in megajoules (MJ).
Answer:
1788.402 MJ
Explanation:
Work done = Force (N) x distance (m)
First we have to convert distance into metres:
173.8 x 1000 = 173,800 m
Then plug these values into the equation above:
173,800 x 10290 = 1788402000 J
The reason it's Joules (the unit for energy) is because work done = energy transferred
Now we have to convert Joules into Mega Joules:
1 J = 1/1000000 MJ
1788402000 J = 1788402000/ 1000000 = 1788.402 MJ
A stone of mass 0.2kg is thrown vertically upwards from the ground with a velocity of 20m/s. Find the maximum height attained by the stone
Answer: 20.4 m
Explanation: speed v upward is v = vo -gt.
When maximum height v = 0, vo -gt = 0 and
T = vo / g = 20 m/s / 9.81 m/s² = 2.04 s
Now height y = vot -0.5 gt^2 = 20,4 m
This is possible to solve using
Conservation of energy Ek= Ep
0.5mv² = mgh. And h = v²/2g. Results same
which line represnts object moving fastest
**WILL MARK BRAINLEST ANSWER, IF RIGHT**
Line - A: (15/10) = 1.5 inch/second
Line - B: (0/10) = 0
Line - C: (10/10) = 1.0 inch/second
Line - D: (-25/20) = -1.25 inch/second
Line-A represents the greatest speed.
If the cells in a circuit are the wrong way around
why does it not work
2 mark explanation
I will mark brainliest
Answer:
By sarting it right and explain
Answer:
There is no current in a diode (in the reverse diode)
Explanation:
Charge willl not flow through a diode (in the reverse directiom)
BECAUSE A DIODE HAS A VERY HIGH RESISTANCE IN THE REVERSE DIRECTION