Light at 543 nm from a helium–neon laser shines on a pair of parallel slits separated by 1. 57 ✕ 10−5 m and an interference pattern is observed on a screen 1. 70 m from the plane of the slits. 1. Find angle from central maximum to first bright fringe

2. At what angle from central maximum does the second dark fringe appear?

3. Find the distance (in m) from the central maximum to the first bright fringe

Answers

Answer 1

(A) The distance from the central maximum to the first bright fringe would be 2.01°(B) the angle from the central maximum to the second dark fringe is  3.01° .(C) The distance would be 0.666meter from the central maximum to the first bright fringe.

Here, can be  written as,

(A) Position of nth bright fringes is,

y = nDλ/d

D = distance between slits and screen

d= separation of slits

λ = wavelength

And here n = 1 for first bright fringe

y = Dλ/d

tanθ = y/D = λ /d

θ = tan⁻¹(λ/d)

θ = tan ⁻¹(543× 10⁻⁹m/1.55×10⁻⁵m)

θ = 2.01°

At 2.01° angle from central maximum to first bright fringe.

(B) For dark fringe

y = (n+1/2)(Dλ/d)

And for second dark fringe n=1

y=  (1+1/2)(Dλ/d)

tanθ = y/D

tanθ = 3/2 (543× 10⁻⁹m/1.55×10⁻⁵m)

θ = 3.01°

At  3.01° angle from central maximum does the second dark fringe appear.

(C) From part A may write as,

y = Dλ/d

y = (1.9m)(543× 10⁻⁹m/1.55×10⁻⁵m)

y = 0.666meter

Thus,  the distance  0.666meter from the central maximum to the first bright fringe.

The complete questions is,

Light at 543 nm from a helium–neon laser shines on a pair of parallel slits separated by 1.55 ✕ 10−5 m and an interference pattern is observed on a screen 1.90 m from the plane of the slits. (a)Find the angle (in degrees) from the central maximum to the first bright fringe.

(b) At what angle (in degrees) from the central maximum does the second dark fringe appear? (c) Find the distance (in m) from the central maximum to the first bright fringe.

To know more about fringe

https://brainly.com/question/20324380

#SPJ1


Related Questions

a red laser from the physics lab is marked as producing 632.8-nm light. when light from this laser falls on two closely spaced slits, an interference pattern formed on a wall several meters away has bright red fringes spaced 5.00 mm apart near the center of the pattern. when the laser is replaced by a small laser pointer, the fringes are 5.13 mm apart. part a what is the wavelength of light produced by the pointer? express your answer to three significant figures and include the appropriate units.

Answers

Answer:

We can use the formula for the spacing between fringes in a double-slit interference pattern:

dsin(theta) = mlambda

where d is the distance between the slits, theta is the angle between the incident light and the normal to the screen, m is the order of the fringe, and lambda is the wavelength of the light.

Since the same screen is used for both the red laser and the pointer, we can assume that the angle theta is the same in both cases. Therefore, we can write:

dsin(theta) = mlambda_red (for the red laser)

dsin(theta) = mlambda_p (for the pointer)

Dividing these two equations, we get:

(lambda_red / lambda_p) = (m_p / m_red)

where m_p and m_red are the orders of the fringes for the pointer and the red laser, respectively.

We are given that the spacing between fringes for the red laser is 5.00 mm and for the pointer is 5.13 mm. Since the fringes are evenly spaced, we can assume that we are looking at the central maximum, where m_red = m_p = 0. Therefore:

(lambda_red / lambda_p) = 0/0 = 1

Solving for lambda_p, we get:

lambda_p = lambda_red = 632.8 nm

Therefore, the wavelength of light produced by the pointer is also 632.8 nm.

Explanation:

An optical device that shuts down the machine any time the light field is broken is a(n):a. Photoelectric deviceb. Electromechanical devicec. Pullback deviced. Radio-frequency device

Answers

The optical device that shuts down the machine any time the light field is broken is a(n): a. Photoelectric device.

This device uses light to detect the presence of an object and triggers a response when the light field is interrupted.

Certain light-sensitive materials may emit electrons, modify their capacity to conduct electricity, or produce an electrical potential, or voltage, across two surfaces when light strikes them. Photoelectric devices are those that rely on these effects to function.

Numerous uses can be made for photoelectric devices. A photoelectric device can open doors automatically or start a counter on an assembly line by acting as an optical switch that detects the interruption of a light beam.

Learn more about "light": https://brainly.com/question/10728818

#SPJ11

According to the octet rule, the first energy level is stable with ________ electrons and the outermost energy level is stable with__________electrons.

Answers

According to the octet rule, the first energy level, also known as the K shell, is stable with a maximum of 2 electrons. This is because the K shell only has one subshell, which can hold a maximum of 2 electrons.

The outermost energy level, also known as the valence shell, is stable with a maximum of 8 electrons. This is because the valence shell has multiple subshells, including s, p, d, and f subshells, which can hold a total of 8 electrons. The octet rule states that atoms tend to gain, lose, or share electrons in order to achieve a full outermost energy level with 8 electrons, which results in greater stability.

The octet rule states that atoms are most stable when they have a full set of electrons in their outermost energy level, which typically means having 8 electrons (except for the first energy level). This is why atoms often form bonds with other atoms to achieve this stable configuration.

To know more about octet rule visit:-

https://brainly.com/question/865531

#SPJ11

Convert 150mV SCE to CSE
A) 80mVcse
B) 105mVcse
C) -85mVcse
D) -95mVcse
E) -220mVcse

Answers

The potential measured against the CSE reference electrode is (B) 105 mV CSE.

What is the correct answer for converting 150mV SCE to CSE?

The correct option is (B) 105 mV CSE.

To convert 150 mV SCE (standard hydrogen electrode) to potential measured against a CSE (copper sulfate electrode) reference electrode, you can use the following equation:

[tex]E(CSE) = E(SCE) + E\°(SCE/CSE)[/tex]

where E(CSE) is the potential measured against the CSE reference electrode, E(SCE) is the potential measured against the SCE reference electrode, and E°(SCE/CSE) is the standard potential for the SCE/CSE half-cell, which is 0.78 volts.

Substituting the given values into the equation:

[tex]E(CSE) = 150 mV + 0.78 V\\E(CSE) = 0.93 V[/tex]

Therefore, the potential measured against the CSE reference electrode is 0.93 volts, which is equivalent to (B) 105 mV CSE.

Learn more about Potential measured

brainly.com/question/21738757

#SPJ11

What will happen to a straight fence that undergoes elastic strain during an earthquake?
A) The fence will bend in the direction of stress.
B) The fence will bend away from the direction of stress.
C) The fence will remain straight.
D) The fence will break.

Answers

During an earthquake, the ground experiences significant stress and movement, which can lead to elastic strain on structures, such as a straight fence.

Elastic strain is the temporary deformation of materials under stress, where the material returns to its original shape once the stress is removed.
In this case, if the straight fence undergoes elastic strain during the earthquake, the fence will respond according to the direction of stress. Therefore, the correct answer is:

A) The fence will bend in the direction of stress.
As the stress is applied to the fence, it will bend or deform in the same direction as the force. However, since the strain is elastic, the fence will return to its original straight shape once the earthquake has subsided and the stress is removed.
It is essential to note that the fence will not bend away from the stress, remains straight, or break due to the elastic nature of the strain. Elastic strain allows the fence to absorb the energy from the earthquake and then release it, preventing permanent deformation or damage.

To learn more about elastic strain, refer:-

https://brainly.com/question/31598065

#SPJ11

what is the initial rotational angular momentum of the satellite, around location d (its center of mass)? (be sure your signs are correct).

Answers

The initial rotational angular momentum of the satellite, around location d (its center of mass), is zero.

Rotational angular momentum (L) is given by L = Iω, where I is the moment of inertia and ω is the angular velocity. Since the satellite is not rotating initially, ω = 0. Therefore, the initial rotational angular momentum of the satellite is zero.

Furthermore, the moment of inertia of the satellite is given by I = ∑mr², where m is the mass of each particle and r is the distance of the particle from the axis of rotation.

Assuming that the satellite is a uniform sphere, we can use the formula for the moment of inertia for a solid sphere, which is I = (2/5)MR², where M is the mass of the sphere and R is its radius. Since the axis of rotation is passing through the center of mass of the satellite, the distance of each particle from the axis of rotation is R. Therefore, the moment of inertia of the satellite is I = (2/5)MR².

Substituting the value of ω = 0 and I = (2/5)MR² in the formula for angular momentum, we get L = 0. Therefore, the initial rotational angular momentum of the satellite is zero.

To know more about rotational angular momentum refer here:

https://brainly.com/question/14082734#

#SPJ11

MUST KNOW CONCEPT
In a parallel electrical circuit
A) total resistance is the sum of all of the resistors
B) current is the same through each resistor
C) voltage is different across each resistor
D) voltage is the same across each resistor

Answers

In a parallel electrical circuit, the correct options are B and D. This means that the current is the same through each resistor and the voltage is the same across each resistor.

This happens because in a parallel circuit, each component is connected to the same two points in the circuit, creating multiple paths for the current to flow. As a result, the current is divided among the resistors, but the voltage remains constant across each one. This is an important concept to understand when designing and analyzing electrical circuits.

In a parallel circuit, all the components are connected in parallel, meaning they share the same voltage across them. Unlike a series circuit, where the total resistance is the sum of all resistors, in a parallel circuit, the total resistance is lower than the individual resistances. Additionally, the current in a parallel circuit is divided among the parallel branches, so it's not the same through each resistor.

To know more about electrical visit :-

https://brainly.com/question/776932

#SPJ11

When there is a change in the magnetic field in a closed loop of wire
A) a voltage is induced in the wire.
B) a current is created in the loop of wire.
C) electromagnetic induction occurs.
D) all of these.
E) none of these.

Answers

D) all of these. When there is a change in the magnetic field in a closed loop of wire, a voltage is induced in the wire, which in turn creates a current in the loop of wire. This process is known as electromagnetic induction.

When there is a change in the magnetic field in a closed loop of wire, Faraday's law of electromagnetic induction states that a voltage will be induced in the wire. This voltage can then cause a current to flow in the loop of wire, according to Ohm's law. Therefore, both A) a voltage is induced in the wire, and B) a current is created in the loop of wire.The phenomenon of inducing a voltage in a closed loop of wire due to a change in the magnetic field is called electromagnetic induction, which is C) another correct answer.Therefore, the correct answer is D) all of these.

Learn more about Ohm's law here:

https://brainly.com/question/1247379

#SPJ11

radio station wcco in minneapolis broadcasts at a fre- quency of 830 khz. at a point some distance from the transmitter, the magnetic-field amplitude of the electromagnetic wave from wcco is 4.82 * 10-11 t. calculate (a) the wavelength; (b) the wave number; (c) the angular frequency; (d) the electric-field amplitude.

Answers

Therefore, the electric-field amplitude of the wave is approximately 14.5 V/m.

(a) The wavelength (λ) of the wave can be found using the formula:

λ = c/f

where c is the speed of light in a vacuum and f is the frequency of the wave.

c = 3.00 × [tex]10^8[/tex]m/s (speed of light in a vacuum)

f = 830 kHz = 830,000 Hz

λ = c/f = 3.00 ×  [tex]10^8[/tex] m/s / 830,000 Hz ≈ 362 m

Therefore, the wavelength of the wave is approximately 362 m.

(b) The wave number (k) is given by:

k = 2π/λ

where λ is the wavelength.

k = 2π/λ = 2π/(362 m) ≈ 0.0173 m

Therefore, the wave number is approximately 0.0173 m.

(c) The angular frequency (ω) is given by:

ω = 2πf

where f is the frequency of the wave.

ω = 2πf = 2π × 830,000 Hz ≈ 5.22 ×  [tex]10^8[/tex] rad/s

Therefore, the angular frequency of the wave is approximately 5.22 ×  [tex]10^8[/tex] rad/s.

(d) The electric-field amplitude (E) can be found using the formula:

E = cB

where B is the magnetic-field amplitude.

c = 3.00 ×  [tex]10^8[/tex] m/s (speed of light in a vacuum)

B = 4.82 ×  [tex]10^8[/tex] T

E = cB = 3.00 × [tex]10^8[/tex] m/s × 4.82 ×  [tex]10^8[/tex] T ≈ 14.5 V/m

Learn more about amplitude Visit: brainly.com/question/3613222

#SPJ4

The wavelength of the electromagnetic wave from WCCO radio station is approximately 362.7 meters.

What is the wave number of the electromagnetic wave from WCCO radio station?

The angular frequency of the electromagnetic wave from WCCO radio station is 2.24 x 10^6 radians per second.

The electric-field amplitude of the electromagnetic wave from WCCO radio station is approximately 1.51 x 10^-3 V/m.

To calculate the wavelength, we can use the formula λ = c/f, where λ is the wavelength, c is the speed of light, and f is the frequency. Given that the frequency is 830 kHz (830,000 Hz), we can convert it to 830,000 cycles per second. Plugging the values into the formula, we find that the wavelength is approximately 362.7 meters.

The wave number (k) can be calculated using the formula k = 2π/λ, where k represents the wave number. By substituting the wavelength value into the formula, we find the wave number of the WCCO radio wave.

The angular frequency (ω) can be determined using the formula ω = 2πf, where ω represents the angular frequency and f is the frequency. By substituting the given frequency value, we calculate the angular frequency of the wave.

To calculate the electric-field amplitude, we can use the relationship between the magnetic-field amplitude (B) and the electric-field amplitude

in an electromagnetic wave, which states that B = E/c. Rearranging the formula, we find that E = Bc. Plugging in the given magnetic-field amplitude value, we can calculate the electric-field amplitude of the wave.

Learn more about Electromagnetic waves

brainly.com/question/14214744

#SPJ11

a device consists of eight balls each of mass 0.6 kg attached to the ends of low-mass spokes of length 1.4 m, so the radius of rotation of the balls is 0.7 m. the device is mounted in the vertical plane. the axle is held up by supports that are not shown, and the wheel is free to rotate on the nearly frictionless axle. a lump of clay with mass 0.20 kg falls and sticks to one of the balls at the location shown, when the spoke attached to that ball is at 45 degrees to the horizontal. just before the impact the clay has a speed 7 m/s, and the wheel is rotating counterclockwise with angular speed 0.24 radians/s.

Answers

Answer:

First, let's find the initial angular momentum of the system before the clay hits the ball. Since the wheel is rotating counterclockwise, the direction of the angular momentum is into the page (out of the screen). The initial angular momentum of the system is:

L1 = Iω1

where I is the moment of inertia of the wheel and ω1 is its initial angular velocity.

The moment of inertia of the wheel can be calculated using the formula:

I = Σmr^2

where Σmr^2 is the sum of the products of the mass of each ball (m) and the square of its distance from the center of the wheel (r). Since all the balls are equidistant from the center, we can simplify this to:

I = 8m(0.7)^2 = 3.136m

where m is the mass of each ball.

Substituting the given values, we get:

I = 8(0.6)(0.7)^2 = 1.176 kg·m^2

The initial angular velocity is ω1 = 0.24 rad/s. Therefore:

L1 = Iω1 = (1.176 kg·m^2)(0.24 rad/s) = 0.28224 kg·m^2/s

When the clay hits the ball, it sticks to it, and the ball starts to rotate with the same angular velocity as the wheel. Let ω2 be the final angular velocity of the system after the collision. Then the final angular momentum of the system is:

L2 = Iω2 + mvR

where m is the mass of the clay, v is its velocity just before the collision, and R is the distance of the point of impact from the center of the wheel.

Substituting the given values, we get:

L2 = (1.176 kg·m^2)ω2 + (0.20 kg)(7 m/s)(0.7 m)

L2 = 1.176ω2 + 0.588 kg·m^2/s

Since angular momentum is conserved, we have L1 = L2. Equating the two expressions for L and solving for ω2, we get:

ω2 = (L1 - 0.588 kg·m^2/s) / 1.176 kg·m^2

ω2 = (0.28224 kg·m^2/s - 0.588 kg·m^2/s) / 1.176 kg·m^2

ω2 = -0.2214 rad/s

The negative sign indicates that the direction of the angular velocity is clockwise, opposite to the initial direction of rotation. Therefore, the final angular velocity of the system after the collision is 0.2214 rad/s clockwise.

Finally, we can calculate the new kinetic energy of the system after the collision. The initial kinetic energy is:

K1 = (1/2)Iω1^2

Substituting the given values, we get:

K1 = (1/2)(1.176 kg·m^2)(0.24 rad/s)^2 = 0.03372 J

The final kinetic energy is:

K2 = (1/2)Iω2^2

Substituting the calculated value of ω2, we get:

K2 = (1/2)(1.176 kg·m^2)(0.2214 rad/s)^2 = 0.01408 J

Therefore, the new kinetic energy of the system after the collision is 0.01408 J.

Therefore, the new kinetic energy of the system after the collision is 0.01408 J.

First, let's find the initial angular momentum of the system before the clay hits the ball. Since the wheel is rotating counterclockwise, the direction of the angular momentum is into the page (out of the screen). The initial angular momentum of the system is:

L1 = Iω1

where I is the moment of inertia of the wheel and ω1 is its initial angular velocity.

The moment of inertia of the wheel can be calculated using the formula:

I =

where Σ[tex]mr^2[/tex] is the sum of the products of the mass of each ball (m) and the square of its  from the center of the wheel (r). Since all the balls are equidistant from the center, we can simplify this to:

I = [tex]8m(0.7)^2[/tex] = 3.136m

where m is the mass of each ball.

Substituting the given values, we get:

I = [tex]8(0.6)(0.7)^2 = 1.176 kg * m^2[/tex]

The initial angular velocity is ω1 = 0.24 rad/s. Therefore:

Since angular momentum is conserved, we have L1 = L2. Equating the two expressions for L and solving for ω2, we get:

[tex]w2 = (L1 - 0.588 kgm^2/s) / 1.176 kgm^2\\w2 = (0.28224 kgm^2/s - 0.588 kgm^2/s) / 1.176 kgm^2\\w2 = -0.2214 rad/s[/tex]

The negative sign indicates that the direction of the angular velocity is clockwise, opposite to the initial direction of rotation. Therefore, the final angular velocity of the system after the collision is 0.2214 rad/s clockwise.

Finally, we can calculate the new kinetic energy of the system after the collision. The initial kinetic energy is:

K2 = [tex](1/2)Iw_2^2[/tex]

Substituting the calculated value of ω2, we get:

K2 = [tex](1/2)(1.176 kgm^2)(0.2214 rad/s)^2 \\= 0.01408 J[/tex]

Learn more about kinetic energy Visit: brainly.com/question/8101588

#SPJ4

An object was weighed in air had a mass of 40. 0 gram. In water, its apparent mass is 5. 00 grams. What is the density (in g/cm3) of the object correct to three significant figures

Answers

The density of the object is 0.103 g/cm³, correct to three significant figures.

To find the density of the object, we need to use the principle of buoyancy. The difference between the weight of the object in air and its apparent weight in water is due to the buoyant force exerted by the water on the object. This force is equal to the weight of the water displaced by the object.

The mass of the water displaced can be calculated as follows:

Mass of water = density of water x volume of water displaced

Since the volume of water displaced is equal to the volume of the object, we can write:

Mass of water = density of water x volume of object

The apparent weight of the object in water is equal to the weight of the object minus the weight of the water displaced:

Apparent weight = weight of object - weight of water displaced

We know that the weight of the object in air is 40.0 grams, which is also its mass, since the acceleration due to gravity is approximately 9.81 m/s². Therefore, the weight of the object is:

Weight of object = mass of object x acceleration due to gravity

= 40.0 g x 9.81 m/s²

= 392.4 g m/s²

The weight of the water displaced is equal to the buoyant force, which can be calculated using Archimedes' principle:

Buoyant force = weight of water displaced = apparent weight of object

Substituting the values we have:

Weight of water displaced = 392.4 g m/s² - 5.00 g m/s²

= 387.4 g m/s²

We can now find the volume of the object:

Volume of object = volume of water displaced

Density of object = mass of object / volume of object

Substituting the values we have:

Density of object = 40.0 g / (387.4 g/cm³ x 1 cm³)

= 0.103 g/cm³

Therefore, the density of the object is 0.103 g/cm³, correct to three significant figures.

Learn more about density ,

https://brainly.com/question/29775886

#SPJ4

the range of temperatures in the kelvin (absolute) scale between the freezing point and boiling point of water is

Answers

The range of temperatures in the Kelvin scale between the freezing point and boiling point of water is 100 K.

The Kelvin scale, also known as the absolute temperature scale, was developed by William Thomson, also known as Lord Kelvin, in 1848. It's designed to have an absolute zero, which is the lowest possible temperature in the universe, and is equivalent to -273.15°C.

In the Kelvin scale, the freezing point of water is set at 273.15 K, while the boiling point is 373.15 K. This range of temperatures is essential to understanding and measuring various physical and chemical processes. For instance, it can help determine the phase changes of substances (like water) under various conditions, as well as their thermal properties.

The Kelvin scale is widely used in scientific and engineering applications, as it provides a more accurate and universal way to measure temperature, compared to other scales such as Celsius or Fahrenheit. It is also beneficial for studying extreme temperatures, such as those in outer space or during nuclear reactions, where the concept of absolute zero is crucial.

In summary, the range of temperatures in the Kelvin scale between the freezing and boiling points of water is 100 K (from 273.15 K to 373.15 K), which is useful for various scientific applications and provides a consistent and accurate measurement of temperature.

For more such questions on Kelvin scale.

https://brainly.com/question/30654754#

#SPJ11

The battery is the same as in circuit 7. The bulbs are all identical and are the same as the bulbs used in circuit 7. During the experiment, you did the same things as before: you adjusted the length of the rheostat L7 so that 1 glow again flowed through bulb H. As before, l'll assume that a current of 30 mA corresponds to 1 glow as the through bulb H If the resistance of rheostat L7 has been adjusted so that 30 mA flows through bulb H then what current flows through bulb B? What current flows through bulb D? If the resistance of rheostat L7 has been adjusted so that 330 mA flows through bulb H then what current flows out of the battery?

Answers

If rheostat L7's resistance is adjusted so that 30 mA flows through bulb H, the current flowing through bulbs B and D is similarly 30 mA.

If rheostat L7's resistance is adjusted so that 330 mA passes through bulb H, the current coming out of the battery is also 330 mA.

Because all bulbs are identical, they have the same resistance, and thus when they are connected in parallel, the same current passes through each of them. When 30 mA flows via bulb H, the same current travels through rheostat L7, as well as bulbs B and D, because they are all connected in parallel. As a result, the current flowing through bulbs B and D is similarly 30 mA.

When the resistance of rheostat L7 is adjusted to allow 330 mA to flow through bulb H, the current flowing out of the battery must likewise be 330 mA, because the current coming into the circuit must equal the current flowing out of the circuit (according to the principle of charge conservation).

Because the bulbs are still linked in parallel, the current flowing through each of them remains constant, and therefore the current flowing through bulb B, bulb D, and rheostat L7 is 330 mA.

learn more about Resistance here:

https://brainly.com/question/30669051

#SPJ4

What is the energy; in J, of light that must be absorbed by a hydrogen atom to transition an electron from n = 3 t0 n = 5? Submit an answer to three signficant figures

Answers

The energy of light that must be absorbed by a hydrogen atom to transition an electron from n = 3 to n = 5 is approximately: 1.55 × 10⁻¹⁹ J.

To calculate the energy of light, in Joules, that must be absorbed by a hydrogen atom to transition an electron from n = 3 to n = 5, you can follow these steps:

1. Use the Rydberg formula for energy change:
ΔE = E_final - E_initial = (-13.6 eV / n_final²) - (-13.6 eV / n_initial²)

2. Plug in the given values of n_initial = 3 and n_final = 5:
ΔE = (-13.6 eV / 5²) - (-13.6 eV / 3²)

3. Calculate the energy change:
ΔE = (-13.6 eV / 25) - (-13.6 eV / 9) = -0.544 eV - (-1.511 eV) = 0.967 eV

4. Convert the energy change from electron volts (eV) to Joules (J) using the conversion factor 1 eV = 1.602 × 10⁻¹⁹ J:
ΔE = 0.967 eV × (1.602 × 10⁻¹⁹ J/eV) = 1.549 × 10⁻¹⁹ J

5. Round the answer to three significant figures:
ΔE ≈ 1.55 × 10⁻¹⁹ J

To know more about "Electron" refer here:

https://brainly.com/question/13998346#

#SPJ11

when is an object at opposition? a) when the object's motion changes direction and becomes retrograde b) when the object is on the opposite side of the sun as earth c) when earth and the sun are on opposite sides of the object d) when the object is on the opposite side of earth as the sun

Answers

An object is when the earth and the sun are on opposite sides of the object. The answer is c).

An object is said to be at opposition when it is located on the opposite side of the sky as the Sun, as seen from the observer's position. In other words, the Earth, the Sun, and the object are in a straight line, with the Earth in the middle.

This is the point in time when the object is closest to Earth and brightest in the sky, making it an ideal time for observations. Opposition occurs for planets and other Solar System bodies that orbit farther from the Sun than Earth, such as Mars, Jupiter, and Saturn.

During opposition, the object rises at sunset, reaches its highest point in the sky around midnight, and sets at sunrise. Opposition occurs roughly once a year for each outer planet, but can vary due to the eccentricity of their orbits.

To know more about earth, refer here:
https://brainly.com/question/24629047#

What would be the absolute magnitude of a classical cepheid variable that had a period of 85 days?

Answers

The absolute magnitude of the classical Cepheid variable with a period of 85 days would be approximately -4.36 in the V-band.

The period-luminosity relationship for Cepheids can be expressed as:

M = a * log(P) + b

Mv = -2.76 * log(P) - 1.43

Using this relationship and plugging in the given period of 85 days, we can calculate the absolute magnitude of the Cepheid:

Mv = -2.76 * log(85) - 1.43 = -4.36

Cepheid variables are a type of pulsating star that exhibits periodic changes in brightness. These stars are important tools in astrophysics for measuring cosmic distances. Since the period of pulsation can be measured from observations of the star's light curve, and the intrinsic brightness of Cepheids can be determined from their pulsation periods and other properties, these stars can be used as standard candles to measure distances to other galaxies.

The brightness of a Cepheid variable star changes due to periodic expansions and contractions of its outer layers. As the star expands, its temperature decreases and it becomes less luminous. Conversely, as the star contracts, its temperature increases and it becomes more luminous. This cycle repeats itself with a period that is proportional to the star's intrinsic brightness.

To learn more about Cepheid variables visit here:

brainly.com/question/30005008

#SPJ4

What marks the boundary between the inside and outside of a black hole?

Answers

The event horizon is the boundary between the inside and outside of a black hole, beyond which not even light can escape the gravitational pull.

The boundary between the inside and outside of a black hole is known as the event horizon. It is the point of no return beyond which not even light can escape the gravitational pull of the black hole. The event horizon is determined by the black hole's mass and spin, and its size is directly proportional to these factors. Once an object or even light crosses the event horizon, it is pulled inexorably towards the singularity at the center of the black hole, a point where the laws of physics as we know them break down.

Learn more about black hole here:

https://brainly.com/question/29508643

#SPJ11

If you have a 500 watt lightbulb and the wall socket provides 120 Volts, what is the current? Explain.​

Answers

Answer: To calculate the current, we can use the formula I = P/V, where I is the current, P is the power, and V is the voltage.

For a 500 watt lightbulb and a 120 volt wall socket, the current would be:

I = P/V

I = 500/120

I = 4.17 amps

Therefore, the current would be 4.17 amps.

This formula is derived from Ohm's law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance between them. In this case, the resistance of the lightbulb is not given, but we can assume that it is constant. By knowing the power and voltage, we can use the formula to calculate the current.

Explanation:

35 kg/s of steam (superheated water vapor) enters an adiabatic, sssf turbine at 700oc, 2.0 mpa, with a velocity of 50 m/s. 28 kg/s of steam exits the turbine at 200oc, 300 kpa, with a velocity of 12 m/s, and the rest exits at 150 kpa with a quality of 70%, and negligible velocity. the surroundings are constant at 100oc. (a) draw a schematic of this device. write your assumptions. (b) write the pertinent info for each inlet and outlet flow. be sure to list tables used. (c) calculate the power input (or output) for this turbine. (d) determine the rate of entropy generation for this turbine. (e) is this turbine reversible, irreversible, or impossible? how did you determine this

Answers

This is a thermodynamics problem involving a steam turbine. The power output of the turbine is 39111.5 kW, and the rate of entropy generation is 3.167 kW/K. Although the turbine is adiabatic and can be considered reversible in theory, practical losses make it an irreversible device.

The required information for each inlet and outlet flow, and solve the given problems.

(a) Assumptions:

The turbine operates at steady-state.

The turbine is adiabatic, meaning there is no heat transfer.

The turbine is an ideal device, with no friction or other losses.

The kinetic and potential energy changes are negligible.

(b) Pertinent Information:

Inlet Flow:

Mass flow rate = 35 kg/s

Inlet Temperature = 700 °C = 973 K

Inlet Pressure = 2.0 MPa

Inlet Velocity = 50 m/s

Using steam tables, we can find the enthalpy of the inlet steam to be h1 = 3567.4 kJ/kg and the entropy to be s1 = 7.055 kJ/kg-K.

Outlet Flow:

Mass flow rate = 28 kg/s

Outlet Temperature = 200 °C = 473 K

Outlet Pressure = 300 kPa

Outlet Velocity = 12 m/s

Using steam tables, we can find the enthalpy of the outlet steam to be h2 = 2751.1 kJ/kg and the entropy to be s2 = 6.631 kJ/kg-K.

For the other outlet flow, we know the pressure and quality. Using steam tables, we can find that the enthalpy is h3 = 2975.5 kJ/kg and the entropy is s3 = 6.784 kJ/kg-K.

(c) Power Input (or Output) Calculation:

We can use the steady-state energy balance equation to calculate the power output of the turbine:

Power Output = m*(h1 - h2) + (35 kg/s - 28 kg/s)*(h1 - h3)

where m is the mass flow rate of the second outlet flow.

Substituting the values, we get:

Power Output = 35*(3567.4 - 2751.1) + 7*(3567.4 - 2975.5)

Power Output = 39111.5 kW

Therefore, the power output of the turbine is 39111.5 kW.

(d) Rate of Entropy Generation Calculation:

The rate of entropy generation can be calculated using the following equation:

Rate of Entropy Generation = m2s2 - m1s1 - m3*s3

where m1, m2, and m3 are the mass flow rates of the inlet, first outlet, and second outlet flows, respectively.

Substituting the values, we get:

Rate of Entropy Generation = 286.631 - 357.055 - m36.784

Since we know that m3 = 7 kg/s (calculated by mass balance), we get:

Rate of Entropy Generation = 286.631 - 357.055 - 76.784

Rate of Entropy Generation = 3.167 kW/K

Therefore, the rate of entropy generation for the turbine is 3.167 kW/K.

(e) Reversibility:

Since the turbine is an adiabatic device, there is no heat transfer. Therefore, the turbine can be considered reversible. However, since there are losses due to friction and other factors, the turbine is not a perfectly reversible device. It is an irreversible device in practical terms.

To know more about the thermodynamics refer here :

https://brainly.com/question/1604031#

#SPJ11

One kg of a soil was sieved through a set of 8 sieves with the size 4. 75 mm, 2. 0 mm, 600µ, 425µ, 300µ, 212µ, 150µ and 75µ. The weight of soil retained on these sieves was found to be 50, 78, 90, 150, 160, 132, 148 and 179 gm respectively. Draw a particle size distribution curve and determine the uniformity coefficient and coefficient of curvature

Answers

The uniformity coefficient is 3.89 and the coefficient of curvature is 1.12.

The total weight of soil retained on all the sieves is 987 grams (50+78+90+150+160+132+148+179). So, the percentage of soil retained on each sieve is:

Sieve size 4.75 mm: 5.07%

Sieve size 2.0 mm: 7.89%

Sieve size 600 µm: 9.12%

Sieve size 425 µm: 15.20%

Sieve size 300 µm: 16.22%

Sieve size 212 µm: 13.38%

Sieve size 150 µm: 14.98%

Sieve size 75 µm: 18.14%

Uniformity coefficient = D60/D10 = 350/90 = 3.89

Coefficient of curvature = (D30)²/(D10 x D60) = (212²)/(90 x 350) = 1.12

A sieve is a material with a porous structure that is used to separate particles of different sizes. It can be made of various materials such as mesh, cloth, or paper. The process of separating particles using a sieve is called sieving or screening.

Sieves are commonly used in the laboratory to separate solid particles from a mixture based on their particle size. This is useful in many applications, such as isolating small particles for analysis or separating larger particles for use in a particular experiment. Sieves can also be used in the industry for sorting materials based on size, such as in the food and pharmaceutical industries. The size of the sieve used determines the size of the particles that can pass through it. The sieve size is typically measured in micrometers or millimeters. The finer the sieve, the smaller the particles that can pass through it.

To learn more about Sieve visit here:

brainly.com/question/13663054

#SPJ4

A liquid rocket engine has an average chamber pressure, Pc = 10 MPa, measured during a test, and a throat area, At = 0. 175 m2. For the test, the average value of thrust measured was 2000 kN, and 100,000 kg of propellant was expended in a test that was run at constant mass flow rate in 120 sec. Determine the average values of CF, c* and specific impulse for this engine. (90 points)

Answers

The average values of CF, c*, and specific impulse for this engine are 10.857, 4441.62 m/s, and 240.8 sec, respectively.

Thrust = mass flow rate * exhaust velocity

where the mass flow rate is given by:

mass flow rate = propellant expended / burn time

and the exhaust velocity is given by:

exhaust velocity = c* * √(2 * (k / (k-1)) * ((Pc / p) [tex]^ ((k-1) / k) - 1))[/tex]

We can first calculate the mass flow rate:

mass flow rate = 100,000 kg / 120 sec = 833.33 kg/sec

Pc / p = 10 MPa / 101.325 kPa = 98.68

Then, we can calculate the exhaust velocity:

exhaust velocity = c* * sqrt(2 * (k / (k-1)) * ((Pc / p) [tex]^ ((k-1) / k) - 1))[/tex]

c* = exhaust velocity / sqrt(2 * (k / (k-1)) * ((Pc / p) [tex]^ ((k-1) / k) - 1))[/tex]

Using this, we get:

exhaust velocity = 2573.78 m/s

c* = 2573.78 m/s / √(2 * (1.2 / 0.2) * ((98.68) [tex]^ ((0.2-1.2) / 1.2) - 1))[/tex] = 4441.62 m/s

Now, we can calculate the thrust coefficient:

CF = Thrust / (Pc * At)

CF = 2000 kN / (10 MPa * 0.175 m²) = 10.857

Finally, we can calculate the specific impulse:

specific impulse = thrust / (mass flow rate * g0)

where g0 is the standard acceleration due to gravity (9.81 m/s²)

specific impulse = 2000 kN / (833.33 kg/s * 9.81 m/s²) = 240.8 sec

In physics, an impulse is a force applied to an object for a very short amount of time. It is calculated as the product of the force and the duration of time over which it is applied. Impulse can cause a change in an object's momentum, which is the product of an object's mass and velocity. According to Newton's second law, force is directly proportional to the rate of change in momentum, so a larger impulse will cause a greater change in momentum.

The concept of impulse is particularly useful in understanding collisions and other situations where forces act over a short time period. In these cases, the impulse can be used to calculate the change in an object's momentum, and from there, its new velocity and direction of motion. Overall, the impulse is an important concept in physics that helps us to understand the behavior of objects in motion and the effects of forces on their momentum.

To learn more about Impulse visit here:

brainly.com/question/30466819

#SPJ4

LIGO detects gravitational waves because the lengths of its arms change as gravitational waves pass by. About how much are these lengths expected to change when LIGO detects gravitational waves from the merger of two neutron stars or two black holes?

Answers

When LIGO detects gravitational waves from the merger of two neutron stars or two black holes, the lengths of its arms are expected to change by an incredibly small amount, on the order of one part in 10^21.

This is roughly equivalent to detecting a change in the length of the distance from the Earth to the nearest star by the width of a human hair. Despite the extremely small size of the expected signal, LIGO is designed with incredibly precise measurement tools that can detect these tiny changes in distance.

These tools include lasers and mirrors that are isolated from external vibrations and disturbances to maximize sensitivity of the detectors.

Learn more about LIGO here:- brainly.com/question/30722973

#SPJ11

Which statement about electric charges is correct?

(A) An object with a positive charge and an object with a negative charge will repel each other.
(B) An object with a negative charge and an object with a positive charge will attract each other.
(C) Two objects with negative charges will attract each other.
(D) Two objects with positive charges will attract each other.

Answers

Statement (B) is correct: an object with a negative charge and an object with a positive charge will attract each other. This is because electric charges of opposite signs attract each other, while charges of the same sign repel each other. This is known as Coulomb's law, which describes the interaction between electric charges.

g in your own words, discuss hydrostatic equilibrium. it can be described as an equally matched battle between which two things

Answers

Hydrostatic equilibrium refers to the state of balance between the forces of gravity and pressure in a fluid, such as a gas or liquid. It is essentially an equally matched battle between these two forces, where gravity pulls the fluid towards its center while pressure pushes the fluid outwards.

In this state, the pressure at any point within the fluid is equal and there is no net force acting on it. This equilibrium is crucial for maintaining the stability and shape of celestial bodies such as stars, planets, and moons, which are held together by their own gravitational forces.

For instance, in stars, the force of gravity pulls inwards while the radiation pressure generated by nuclear fusion within the star pushes outwards. This balance between forces is what keeps the star from collapsing or expanding uncontrollably.

Overall, hydrostatic equilibrium is a fundamental concept in physics that explains how gravity and pressure interact to maintain balance in fluid systems.

To know more about Hydrostatic equilibrium refer here:

https://brainly.com/question/13696206#

#SPJ11

which of the following statements are true concerning special relativity? check all that apply. which of the following statements are true concerning special relativity?check all that apply. time can no longer be regarded as an absolute quantity. clocks moving relative to an observer are measured by that observer to run more slowly compared to clocks at rest. light propagates through empty space with a definite speed independent of the speed of the source or observer. the laws of physics have the same form in all inertial reference frames. the length of an object is measured to be shorter when it is moving relative to the observer than when it is at rest.

Answers

The statements given are about special relativity and all of them are true because consists of key concepts in special relativity.

Special relativity is a theory developed by Albert Einstein that explains the behavior of objects in motion at high speeds near the speed of light. The correct statements concerning special relativity are:

- Time can no longer be regarded as an absolute quantity.
- Clocks moving relative to an observer are measured by that observer to run more slowly compared to clocks at rest.
- Light propagates through empty space with a definite speed independent of the speed of the source or observer.
- The laws of physics have the same form in all inertial reference frames.
- The length of an object is measured to be shorter when it is moving relative to the observer than when it is at rest.

These statements are all true and are key concepts in special relativity. The theory has been extensively tested and has been found to be accurate in describing the behavior of objects at high speeds.


To know more about Einstein’s Special Relativity visit:

https://brainly.com/question/30054334

#SPJ11

What is something that you use almost every day that is a polymer?
A) metal
B) gas
C) water
D) plastic
E) wood

Answers

The answer to the question, "What is something that you use almost every day that is a polymer?" is:D) plastic
Plastic is the most common example of a polymer that we use daily in various forms, such as bags, bottles, and containers.

Polymers are materials made up of repeating units or monomers, and plastic is one of the most common types of polymers used in everyday life. Plastic can be found in items such as water bottles, food containers, and packaging materials. It is a versatile material that can be molded into various shapes and forms, making it a popular choice for many applications.

Plastic is a polymer, which means it's composed of long chains of molecules. Other options are incorrect because:

A) Metal is not a polymer; it's an element or an alloy of different elements.
B) Gas is a state of matter and not a polymer.
C) Water is a compound  and not a polymer.
E) Wood is a natural material mainly composed of cellulose, which is a natural polymer, but it is not a primary example of a polymer when compared to plastic.


Learn more about natural polymers here:

https://brainly.com/question/17354715

#SPJ11

A car travels 200 km in the first 2. 5hr of a trip, it stop for 1/2 hour then travels the final speed of 200 km in 2 hours find the average speed of the car

Answers

The average speed of the car for the entire trip is 80 km/h.

The total distance travelled is the sum of the distances travelled in the two legs of the trip, and the total time taken is the sum of the times taken in each leg.

In the first leg of the trip, the car travels 200 km in 2.5 hours. Therefore, its speed in this leg is:

[tex]v1=d1/t1=200 km/2.5 hours = 80km/h[/tex]

During the 0.5-hour rest stop, the car does not travel any distance, so we can ignore this time period when calculating the average speed.

In the second leg of the trip, the car travels another 200 km, this time in 2 hours. Therefore, its speed in this leg is:

[tex]v2=d2/t2 = 200km/2hours = 100km/h[/tex]

The total distance travelled is 200 km + 200 km = 400 km, and the total time taken is 2.5 hours + 0.5 hours + 2 hours = 5 hours. Therefore, the average speed of the car for the entire trip is:

average speed = total distance / total time = 400 km / 5 hours = 80 km/h

To know more about speed:

https://brainly.com/question/29127452

#SPJ4

One cloud carries a charge of − 1. 0 C −1. 0Cminus, 1, point, 0, start text, C, end text and another cloud carries a charge of 5. 0 C 5. 0C5, point, 0, start text, C, end text. The two clouds are 1. 5 × 1 0 3 m 1. 5×10 3 m1, point, 5, times, 10, cubed, start text, m, end text apart. Calculate the magnitude of the force between these two charged objects. Write your answer in scientific notation using two significant figures. ​

Answers

We obtain a force of -1.5 x 10-1 N when we translate the response into scientific notation with two significant figures.

There are 1.5 x 103 metres between two clouds. The difference in charge between two clouds is 1.0 C for one and 5.0 C for the other. We can utilise Coulomb's law, which takes into account both the distance between the charges and the strength of their charges, to determine the force between them.

The equation provides us with an attraction or repelling force between the charges. In this instance, the result is a -0.15 N attractive force. As a result, the two clouds would be attracted to one another.

We obtain a force of -1.5 x 10-1 N when we translate the response into scientific notation with two significant figures.

Learn more about force:

https://brainly.com/question/26115859

#SPJ4

A 1.7-kg book rests on a table. A downward force of 14 N is exerted on the top of the book by a hand pushing down on the book.
What is the net force on the book? Is it accelerating? (You must provide an answer before moving to the next part.)

Answers

The magnitude of the net force is only 2.7 N, which is much smaller than the weight of the book. Therefore, the book is not accelerating, but rather it is in a state of static equilibrium, where the net force acting on it is zero. This means that the book is at rest and will remain at rest unless acted upon by an external force.

The net force on the book is the vector sum of all the forces acting on it. In this case, there are two forces: the weight of the book, which acts downward with a magnitude of mg = (1.7 kg)(9.81 [tex]m/s^2[/tex]) = 16.7 N, and the force exerted by the hand, which acts downward with a magnitude of 14 N.

Therefore, the net force in the book is the difference between these two forces:

Net force = 14 N - 16.7 N = -2.7 N

Since the net force is negative, this means that the book is experiencing a net force in the upward direction, which is opposite to the direction of gravity.

To know more about static equilibrium refer here:

https://brainly.com/question/30807709#

#SPJ11

a 2.00 kg frictionless block attached to an ideal spring with force constant 365 n m is undergoing simple harmonic motion when the block has displacement 0.200 m it is moving in the negative x direction with a speed of 5.00 m s

Answers

The amplitude of the motion is approximately 0.290 m.We find using conservation of energy principle.

Using the conservation of energy principle, we can find the amplitude of the motion of a 2.00 kg frictionless block attached to an ideal spring with force constant 365 N/m that is undergoing simple harmonic motion. Given that the block has a displacement of 0.200 m and is moving in the negative x direction with a speed of 5.00 m/s, we can calculate the amplitude using the formula:

A = v / sqrt(k/m)

where A is the amplitude, v is the maximum velocity of the block, k is the spring constant, and m is the mass of the block. Plugging in the given values, we get:

A = 5.00 m/s / sqrt(365 N/m / 2.00 kg)

Simplifying this expression, we get:

A ≈ 0.290 m

Learn more about conservation of energy here:

https://brainly.com/question/2137260

#SPJ11

The complete question is :

a 2.00 kg frictionless block attached to an ideal spring with force constant 365 n m is undergoing simple harmonic motion when the block has displacement 0.200 m it is moving in the negative x direction with a speed of 5.00 m s Find the amplitude of the motion.

Other Questions
Can someone help me on this please What was symbolic of Nora's language? (Short, erratic thoughts, costume, and the bond) The nurse cares for a client who was admitted in status epilepticus and whose last seizure was four hours ago. What is the most important nursing assessment for this client?a. Respiratory statusb. Injuries to the extremitiesc. Vital signs and oxygen saturationd. Level of consciousness Length of time a sponsor must wait before starting clinical trials after IND submission to FDA 3. Which reaction is only experimental?FissionFusionBoth When two or more brands are reviewed against each other on certain attributes, it is considered ________ advertising.Select one:a. institutionalb. covertc. pioneeringd. comparativee. competitive please answer i will give brainlest gene demby says that "whiteness" is elastic. what does he mean by that A 4. 90- kg steel ball is dropped from a height of 13. 0 min to a box of sand and sinks 0. 700 minto the sand before stopping ACCOUNTINGMake-or-Buy DecisionPizana Computer Company has been purchasing carrying cases for its portable computers at a purchase price of $60 per unit. The company, which is currently operating below full capacity, charges factory overhead to production at the rate of 45% of direct labor cost. The unit costs to produce comparable carrying cases are expected to be as follows:Line Item Description AmountDirect materials $29.00Direct labor 22.00Factory overhead (45% of direct labor) 9.90Total cost per unit $60.90If Pizana Computer Company manufactures the carrying cases, fixed factory overhead costs will not increase and variable factory overhead costs associated with the cases are expected to be 16% of the direct labor costs. you need to explore what appeasement was in regard to Hitlers actions in the 1930s and discuss a couple of examples. Make sure to include the response of the leaders from France and Great Britain at the time and why you believe they acted as they did. This is hypotheticalbut how should the world have possibly reacted instead? What do the names of the creek and the river suggest about life in Lacks Town? TRUE OR FALSE: One example of management fraudis assigning a payment of one debtor to another debtor in order tocover an irregularity done. 48 yo F presents with dysphagia for both solid and liquid foods that has slowly progressed in severity over the past year. It is associated with regurgitation of undigested food, especially at night. What the diagnose? which type of bias is the tendency to always construe ambiguous situations in a positive or negative way? a) interpretation b)confirmation c) observer d) sampling A manufacturer inspects 800 personal video players and finds that 796 of them have no defects. What is the experimental probability that a video player chosen at random has no defects? Express your answer as a percentage. what are the 10 categories in the CIWA-Ar scale? (NTTAPVAHAO) give inequalities that describe the flat surface of a washer that is 3.6 inches in diameter and has an inner hole with a diameter of 3/7 inch. Amazon seeks out attestations from organizations that are what? (Choose two.)a. Dependentb. Independentc. Third partyd. Subsidiary answer the following : practitioner who can will his or her spirit to leave the body and journey to upper and lower world, seeking the underlying causes of event