The distance between the fringes will be greater for yellow light. It's because yellow light has a longer wavelength than green light.
The distance between the fringes in an interference pattern is determined by the wavelength of the light used. Yellow light has a longer wavelength than green light, so the distance between the fringes will be greater when using yellow light. This is because the distance between the fringes is directly proportional to the wavelength of the light used in the experiment. Therefore, if the wavelength of the light is longer, the distance between the fringes will also be longer.
Learn more about wavelength: https://brainly.com/question/10750459
#SPJ11
two objects collide under conditions where total momentum is conserved. is the momentum conserved for each object?
Yes, the momentum is conserved for each object in a collision where total momentum is conserved.
This means that the momentum of each individual object before the collision will equal the momentum of that same object after the collision, but in the opposite direction. This conservation of momentum is a fundamental law of physics, stating that in a closed system, the total momentum remains constant unless acted upon by an external force. Yes, each object in the impact maintains its momentum. This is due to the law of conservation of momentum, which stipulates that the overall momentum of a closed system—in this case, the collision of the two objects—remains constant before and after the collision. Every object must conserve its momentum because it is a component of the closed system and is part of the overall momentum. As a result, in the collision, each object's momentum is preserved.
learn more about collision here:
https://brainly.com/question/30636941
#SPJ11
Yes, the momentum is conserved for each object in a collision where total momentum is conserved.
This means that the momentum of each individual object before the collision will equal the momentum of that same object after the collision, but in the opposite direction. This conservation of momentum is a fundamental law of physics, stating that in a closed system, the total momentum remains constant unless acted upon by an external force. Yes, each object in the impact maintains its momentum
. This is due to the law of conservation of momentum, which stipulates that the overall momentum of a closed system—in this case, the collision of the two objects—remains constant before and after the collision. Every object must conserve its momentum because it is a component of the closed system and is part of the overall momentum. As a result, in the collision, each object's momentum is preserved.
learn more about collision here:
brainly.com/question/30636941
#SPJ4
two 7493 counters, configured to count 0 to f, are connected so that the q3 output of one ic is wired to the cp0 clock input of the other ic. cp1 of each is fed from its q0 output. what is the modulus of the total circuit?
The total circuit will have a modulus of 256.
What is the total modulus of the circuit when two 7493 counters?The 7493 is a binary counter that can count from 0 to 15 in binary (or 0 to F in hexadecimal). When two 7493 counters are connected in this way, the Q3 output of the first counter is connected to the CP0 input of the second counter. This means that when the first counter reaches a count of 8 (1000 in binary), it will send a clock pulse to the second counter, causing it to count up by one. The CP1 input of each counter is connected to the Q0 output of the same counter, which means that the counters will count in a loop from 0 to F (or 15) and then back to 0. The modulus of the total circuit is the maximum count that it can reach, which is 16 in this case. Therefore, the modulus of the total circuit will be 256.
Learn more about binary counter
brainly.com/question/30009204
#SPJ11
A geologic feature of divergent plate continental crust is called a zone of
A geologic feature of divergent plate continental crust is called a zone of rifting.
What is zone of rifting?A zone of rifting is a geologic feature that occurs where tectonic plates are moving away from each other, causing the Earth's crust to stretch and thin. This process can result in the formation of a long, narrow depression called a rift valley.
A geologic feature of divergent plate continental crust is called a zone of rifting. This is a region where tectonic plates are moving away from each other, causing the Earth's crust to stretch and thin. As the crust stretches, faults and fractures can develop, and magma from the Earth's mantle can rise to the surface, creating volcanic activity. Over time, this process can lead to the formation of a new ocean basin if the rifting continues and the plates continue to move apart. Some examples of zones of rifting include the East African Rift Valley and the Mid-Atlantic Ridge.
To know more about zone of rifting:
https://brainly.com/question/987497
#SPJ1
what is the wavelength of a radio photon from an am radio station that broadcasts at 1270 kilohertz? express your answer to three significant figures and include the appropriate units.
The wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz is 236 meters.
To find the wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)
1. First, we need to convert the frequency from kilohertz to hertz:
1270 kilohertz = 1270 * 10³ hertz = 1,270,000 hertz
2. Next, we will use the speed of light, which is approximately 3.00 * 10⁸ meters per second (m/s).
3. Now, we can plug in the values into the formula:
wavelength (λ) = (3.00 * 10⁸ m/s) / (1,270,000 Hz)
4. Calculate the wavelength:
λ ≈ 236.22 meters
5. Finally, express the answer to three significant figures and include the appropriate units:
λ ≈ 236 meters
Learn more about wavelength:
https://brainly.com/question/10750459
#SPJ11
during fusion, a force must be overcome to bring reacting nuclei together. the nature of this force is a force. is called
The force that must be overcome to bring reacting nuclei together during fusion is the Coulomb force, which is the electrostatic force of repulsion between positively charged atomic nuclei.
In the case of fusion, the positively charged nuclei must overcome this force of repulsion in order to get close enough together for the strong nuclear force to come into play and bind them together. This requires an immense amount of energy, which is typically provided by high temperatures and pressures in a fusion reactor.
The challenge of harnessing fusion as a viable energy source lies in being able to sustain the high temperatures and pressures required to overcome the Coulomb force and initiate fusion reactions, while also effectively managing the resulting energy output.
Learn more about e Coulomb force
https://brainly.com/question/11141051
#SPJ4
During fusion, a force must be overcome to bring reacting nuclei together. This force is called the electrostatic force, also known as the Coulomb force.
During fusion, the force that must be overcome to bring reacting nuclei together is known as the Coulomb force, which is an electrostatic force of repulsion between positively charged nuclei. This force arises due to the fact that both nuclei have a positive charge, and like charges repel each other.
The Coulomb force is a fundamental force of nature, and it is one of the four fundamental forces that govern the behavior of matter. It is responsible for many phenomena in our everyday lives, such as the repulsion between two magnets with the same polarity and the interaction between charged particles in electric circuits.
In the context of fusion, the Coulomb force must be overcome by the high temperature and pressure in the fusion plasma in order to bring the reacting nuclei close enough together for the strong nuclear force to take over and bind them into a new, heavier nucleus. This process releases a tremendous amount of energy and is the fundamental source of energy in the sun and other stars.
To learn more about Coulomb force, refer:-
https://brainly.com/question/11141051
#SPJ11
As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. this is called
As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. This is called the "gravitational wobble" or "stellar wobble".
As a planet orbits a star, it follows an elliptical path due to the gravitational pull of the star. The shape of the planet's orbit is determined by the balance between the gravitational force of the star and the planet's own motion. However, the planet's gravity also affects the star, causing it to move slightly in response to the planet's pull. This motion of the star is much smaller than that of the planet, but it is still measurable and can be observed. This phenomenon is known as the planet's gravitational influence on the star, which causes the star to wobble slightly. This effect is used by astronomers to detect and study exoplanets orbiting distant stars.
To learn more about gravitational wobble, refer:-
https://brainly.com/question/31168966
#SPJ11
The phenomenon that occurs when a planet orbits a star, causing both the planet and the star to make elliptical motions due to their mutual gravitational effects.
This phenomenon is known as the "wobble" or "stellar wobble" and is caused by the gravitational interaction between a planet and its star. As a planet orbits a star, it exerts a gravitational force on the star, causing it to move slightly in response. This movement results in a small, periodic shift in the star's spectral lines, which can be detected by astronomers.
By analyzing this shift, astronomers can determine the presence, size, and orbital characteristics of planets around other stars. At the same time, the planet's gravity also affects the star, causing the star to make a smaller elliptical motion in response. This mutual gravitational interaction results in the observed stellar wobble.
To know more about stellar wobble:
https://brainly.com/question/29542172
#SPJ11
if a sound wave transitions from one medium to another, which transition would result in a shortening of the wavelength of the sound wave?
If a sound wave transitions from one medium to another, a transition from a medium with a higher speed of sound to a medium with a lower speed of sound would result in a shortening of the wavelength of the sound wave.
1. When a sound wave enters a new medium, its frequency remains constant.
2. The speed of sound depends on the properties of the medium (e.g., density, elasticity).
3. The wavelength of the sound wave can be calculated using the formula: wavelength = speed of sound / frequency.
4. When the speed of sound is higher in the first medium and lower in the second medium, the wavelength will decrease according to the formula since the frequency is constant.
So, a transition from a medium with a higher speed of sound to a medium with a lower speed of sound would cause the wavelength of the sound wave to shorten.
To know more about properties of the medium:
https://brainly.com/question/23088538
#SPJ11
A sound wave transitioning from a medium with a higher speed of sound to a medium with a lower speed of sound will result in a shortening of the wavelength.
When a sound wave transitions from a medium with a higher speed of sound to a medium with a lower speed of sound, the wavelength of the sound wave will shorten.
Step-by-step explanation:
1. A sound wave is an oscillation of pressure that propagates through a medium.
2. The transition occurs when the sound wave moves from one medium to another.
3. The speed of sound in each medium depends on the medium's properties (density, elasticity, etc.).
4. If the sound wave moves from a medium with a higher speed of sound to a medium with a lower speed of sound, the wavelength will shorten.
5. This shortening occurs because the wave's frequency remains constant, and since the speed of sound has decreased, the wavelength must also decrease to maintain the relationship: speed = wavelength × frequency.
To learn more about the sound wave, refer:-
https://brainly.com/question/11797560
#SPJ11
how many joules of energy does a 100 watt light bulb use per hour? express your answer in joules to two significant figures.
To determine how many joules of energy a 100-watt light bulb uses per hour, you can follow these steps:
Step 1: Identify the power of the light bulb, which is given as 100 watts.
Step 2: Convert the power to joules per second, since 1 watt is equal to 1 joule per second. Therefore, the light bulb has a power of 100 joules per second.
Step 3: Calculate the energy used per hour. There are 3,600 seconds in an hour, so multiply the power (in joules per second) by the number of seconds in an hour:
Energy = Power x Time
Energy = 100 joules/second x 3,600 seconds
Energy = 360,000 joules
So, a 100-watt light bulb uses 360,000 joules of energy per hour.
To know more about Energy :
https://brainly.com/question/31312255
#SPJ11
T or F: If one cuts a current carrying wire, the flow of electricity will spill out into the air
False because when a current-carrying wire is cut, the circuit is broken and the flow of electricity is interrupted. The electrons in the wire will stop moving, and there will be no flow of electricity in the air.
The current in the wire is carried by electrons, which are negatively charged particles that are tightly bound to the wire. When the wire is cut, the electrons can no longer flow in a continuous path and the current will stop. However, there may be a brief spark or arc if the wire is cut while there is still a high voltage present, as the electrons try to jump across the gap in the wire. But once the voltage dissipates, the current flow will stop completely.To learn more about electricity please visit:
https://brainly.com/question/12791045
#SPJ11
False. Cutting a wire that carries current won't cause electricity to discharge into the atmosphere. But the circuit will be broken, and no longer will power be flowing.
A wire produces a magnetic field as current runs through it. The electrons are kept flowing by this magnetic field in a certain direction, and when the wire is severed, the circuit is broken and the electrons cease to move. Nevertheless, if the wire is cut in a way that sparks or if the wire is improperly insulated, the energy may arc or leap to conductive material nearby, potentially posing a threat. Care must be used when handling wires that carry current, and proper safety precautions must be taken.
learn more about electricity here:
https://brainly.com/question/15800304
#SPJ11
Our Sun is about one thousand times as massive as Jupiter. Let Object 1 be the Sun and Object 2 be Jupiter. Then m1 ≈ 1,000m2. Also, let R stand for the total distance between them (R = d1 + d2). What of the following statements must be true?
One statement that must be true is that the gravitational force exerted by the Sun on Jupiter is much greater than the force exerted by Jupiter on the Sun.
This is because the force of gravity between two objects is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them. In this case, the mass of the Sun is much greater than the mass of Jupiter, so the force exerted by the Sun is much stronger.
Additionally, the distance between the Sun and Jupiter is relatively large compared to the size of the objects themselves, so the force of gravity is further weakened. This is why Jupiter orbits the Sun, rather than the other way around.
Learn more about gravitational force
https://brainly.com/question/12528243
#SPJ4
Assume a firm closes down in the short run and produces no output. Under these conditions:A. TVC is positive, but TFC and TC are zero.B. TFC is positive, but TVC and TC are zero.C. TFC and TC are positive, but TVC is zero.D. TFC, TVC, and TC will all be positive.
The correct answer is C.
In this case, Total Fixed Costs (TFC) remain positive as they are the expenses that do not change with the level of output, such as rent, salaries, and depreciation. Total Variable Costs (TVC) are zero since there is no production, and variable costs depend on the level of output. Total Costs (TC) remain positive as they are the sum of TFC and TVC, and since TFC is positive, TC will also be positive.
To learn more about Total fixed Cost, click on this -
brainly.com/question/26358854
#SPJ11
a workman carries some lumber up a staircase. the workman moves 9.6 m vertically and 22 m horizontally. if the lumber weighs 45 n, how much work was done by the workman?
The total work done by the workman was 432 joules
The workman lifted the lumber a vertical distance of 9.6 m, which means he did work against gravity. The amount of work done is equal to the force (weight of the lumber) multiplied by the distance it was lifted:
Work = force x distance
Work = 45 N x 9.6 m
Work = 432 joules
In addition to lifting the lumber, the workman also moved it horizontally a distance of 22 m. However, since the lumber was not lifted or lowered during this movement, no work was done against gravity.
Therefore, this distance does not affect the amount of work done by the workman.
To learn more about : work
https://brainly.com/question/30121704
#SPJ11
please help answer all A through D will give 100 points
Entropy has some interesting properties. Calculate the change in entropy for the following situations. For these small temperature changes, you can use the original temperature to find the changes in entropy.
A: Heating 1.0 kg of water from 272 K to 274 K.
B:Heating 1.0 kg of water from 353 K to 354 K.
C:Heating 1.0 kg of lead from 273 K to 274 K.
D:Completely melting 1.0 kg of ice at 273 K.
The changes in entropy are: A) 30.8 J/K, B) 11.8 J/K, C) 0.47 J/K and D) 1223 J/K
What is entropy?
Entropy is a thermodynamic quantity that describes the degree of disorder or randomness in a system. It is a measure of the number of possible arrangements or microstates that a system can have, given its macroscopic properties like temperature, pressure, and volume.
The change in entropy can be calculated using the following formula:
ΔS = Q/T
Where ΔS is the change in entropy, Q is the heat absorbed or released, and T is the temperature in Kelvin.
A) Heating 1.0 kg of water from 272 K to 274 K:
The specific heat capacity of water is 4.184 J/(g·K), so the heat absorbed can be calculated as follows:
Q = m × c × ΔT
Q = 1000 g × 4.184 J/(g·K) × (274 K - 272 K)
Q = 8,368 J
The change in entropy is:
ΔS = Q/T
ΔS = 8,368 J / 272 K
ΔS = 30.8 J/K
B) Heating 1.0 kg of water from 353 K to 354 K:
Using the same formula as before:
Q = m × c × ΔT
Q = 1000 g × 4.184 J/(g·K) × (354 K - 353 K)
Q = 4,184 J
The change in entropy is:
ΔS = Q/T
ΔS = 4,184 J / 353 K
ΔS = 11.8 J/K
C) Heating 1.0 kg of lead from 273 K to 274 K:
The specific heat capacity of lead is 0.128 J/(g·K), so the heat absorbed can be calculated as follows:
Q = m × c × ΔT
Q = 1000 g × 0.128 J/(g·K) × (274 K - 273 K)
Q = 128 J
The change in entropy is:
ΔS = Q/T
ΔS = 128 J / 273 K
ΔS = 0.47 J/K
D) Completely melting 1.0 kg of ice at 273 K:
The heat of fusion of ice is 333.55 J/g, so the heat absorbed can be calculated as follows:
Q = m × ΔH
Q = 1000 g × 333.55 J/g
Q = 333,550 J
The change in entropy is:
ΔS = Q/T
ΔS = 333,550 J / 273 K
ΔS = 1223 J/K
Therefore, the changes in entropy are:
A) 30.8 J/K
B) 11.8 J/K
C) 0.47 J/K
D) 1223 J/K
To know more about entropy, visit:
https://brainly.com/question/31047254
#SPJ1
a 1 meter long solenoid with 200 turns carries 2a of current . calculate the magnetic field on axis.
The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.
The magnetic field on the axis of a solenoid can be calculated using the formula:
B = μ₀ * n * I
Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.
In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.
The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A
When we enter these values into the formula, we get:
B = μ₀ * n * I
= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A
= 5.03 × 10⁻⁴ T
Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.
Learn more about magnetic field
https://brainly.com/question/14848188
#SPJ4
magnetic field on the axis of the solenoid is approximately 0.005 T
Solution - Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:
Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)
where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.
In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:
n = 200 turns / 1 m = 200 turns/m
Now, plug the values into the formula:
B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)
B ≈ 0.005 T
The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).
To learn more about solenoid, click on this
brainly.com/question/22043434
#SPJ11
PLEASE ANSWER ASAP
1. How many atoms are present in 8.500 mole of chlorine atoms?
2. Determine the mass (g) of 15.50 mole of oxygen.
3. Determine the number of moles of helium in 1.953 x 108 g of helium.
4. Calculate the number of atoms in 147.82 g of sulfur.
5. Determine the molar mass of Co.
6. Determine the formula mass of Ca3(PO4)2.
IT WOULD BE HELPFUL
The number of atoms in 147.82 g of sulphur is 2.772 x 10²⁴. In 1.953 x 10⁸ g of helium, there are 4.883 × 10⁷ moles of helium. 15.50 moles of oxygen weigh 248 g. Calcium phosphate's formula mass would be 310.18 g/mol.
How many atoms make up 1 gramme?The quantity of atoms or molecules per gramme of atomic weight is known as Avogadro's number, which is 6.022 × 10²³/mole. One mole of hydrogen comprises 6.022 × 10²³ hydrogen atoms for one gramme of hydrogen with an atomic weight of one gramme.
The Avogadro's number states that 1 mole of any substance contains 6.022 x 10²³ particles. Therefore, 8.500 moles of chlorine atoms would contain:
8.500 moles * 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.
The molar mass of oxygen is 16.00 g/mol. Therefore, 15.50 moles of oxygen would have a mass of:
15.50 moles * 16.00 g/mol = 248 g
So the mass of 15.50 mole of oxygen is 248 g.
The molar mass of helium is 4.00 g/mol. Therefore, 1.953 x 10⁸ g of helium would contain:
1.953 x 10⁸ g / 4.00 g/mol = 4.883 x 10⁷ moles of helium.
The molar mass of sulfur is 32.06 g/mol. Therefore, 147.82 g of sulfur would contain:
147.82 g / 32.06 g/mol = 4.6055 moles of sulfur. Therefore, the formula mass of Calcium phosphate would be:
(340.08 g/mol) + (230.97 g/mol) + (8*16.00 g/mol) = 310.18 g/mol.
To know more about formula visit:-
https://brainly.com/question/29792091
#SPJ1
a laser beam takes 45.5 ms to be reflected back from a totally reflecting sail on a spacecraft. how far away is the sail?
The sail is approximately 6,832,500 meters away from the laser source.
To determine the distance between the laser source and the totally reflecting sail on a spacecraft, we'll use the time it takes for the laser beam to be reflected back, which is 45.5 ms (milliseconds).
Since the laser beam travels to the sail and back, we must account for the round trip. The speed of light is approximately 3.0 x 10^8 meters per second (m/s).
First, convert 45.5 ms to seconds: 45.5 ms × (1 s / 1000 ms) = 0.0455 s.
Next, calculate the total distance the laser beam travels during this time: distance = speed × time, so distance = (3.0 x 10^8 m/s) × 0.0455 s ≈ 13,665,000 meters.
Finally, divide the total distance by 2 to find the distance between the laser source and the sail: 13,665,000 meters / 2 ≈ 6,832,500 meters.
To learn more about : meters
https://brainly.com/question/24445340
#SPJ11
a stationary source emits sound waves of frequency f and wavelength that travel through a gas with speed v. if the type of gas is changed so that the wave now moves with speed 2v, what will be the frequency and wavelength of the new wave respectively?
The frequency of the wave remains f, while the new wavelength is λ' = (2v)/f.
When the sound wave travels through a gas with speed v, its wavelength is given by the formula λ = v/f, where λ is the wavelength and f is the frequency.
If the gas is changed such that the wave now moves with speed 2v, the frequency of the wave remains constant, as it is determined by the source. However, the new wavelength can be found by using the formula for the speed of the wave, which is given by v = λf. Rearranging the equation to solve for λ, we get λ = v/f. Since the speed of the wave is now 2v, the new wavelength will be λ' = (2v)/f.
Learn more about wavelength
https://brainly.com/question/31143857
#SPJ4
a 650 nm laser shines through a diffraction grating. the first bright band is 0.54 m from the center. another laser is only deflected to 0.42 m from the center. what is the wavelength of this light?
The second laser has a wavelength of around 835.71 nm.
What is the diffraction grating's level formula?N = 1/ d, where d is the grating spacing, is the number of slits per metre on the grating. At a given order and wavelength, the angle of diffraction rises as d value falls. In other words, as the number of slits per metre grows, so does the angle of diffraction.
d sinθ = mλ
sinθ₁ = (0.54 m) / d
For the second laser, m = 1 again and the distance from the center is 0.42 m. We can solve for sinθ₂:
sinθ₂ = (0.42 m) / d
Since the spacing of the diffraction grating is the same for both lasers, we can set the two equations equal to each other and solve for λ:
d sinθ₁ = d sinθ₂
(0.54 m) / λ = (0.42 m) / λ
Simplifying, we get:
λ = (0.54 m * 650 nm) / 0.42 m
λ = 835.71 nm
To know more about wavelength visit:-
https://brainly.com/question/13533093
#SPJ1
Question:
A laser with a wavelength of 650 nm shines through a diffraction grating. The first bright band is observed at a distance of 0.54 m from the center. Another laser is shone through the same grating and is deflected to a distance of 0.42 m from the center. What is the wavelength of the second laser?
2.) which statement is true with respect to faraday's law of induction? a.) the voltage induced depends on the magnetic field strength in the loop. b.) the voltage induced depends on the area of the loop within which the magnetic field is penetrating. c.) the voltage induced depends on how quickly the area and magnetic field change. d.) none of the above.
The statement that is true with respect to Faraday's law of induction is option C - the voltage induced depends on how quickly the area and magnetic field change.
Faraday's law states that the voltage induced in a coil is proportional to the rate of change of magnetic flux through the coil. Magnetic flux is the product of the magnetic field strength and the area of the loop within which the magnetic field is penetrating.
Therefore, a change in either the magnetic field strength or the area of the loop will result in a change in magnetic flux, which in turn will induce a voltage in the coil. The faster the change in magnetic flux, the greater the induced voltage will be.
Learn more about Faraday's law of induction here: https://brainly.com/question/17012638
#SPJ11
if at a concert, a wind blows directly from the orchestra toward you, the frequency of the sound you hear will be:A) decreased.
B) increased.
C) neither decreased nor increased.
If at a concert, a wind blows directly from the orchestra toward you, the frequency of the sound you hear will be neither decreased nor increased. Option C is correct.
The frequency of the sound you hear at a concert will not be affected by the direction of the wind blowing from the orchestra toward you. The frequency of sound waves is determined by the source of the sound and the speed of sound in air, and is not affected by the wind blowing in a particular direction.
However, the intensity or volume of the sound may be affected by the wind, especially if it is a strong wind. In this case, the sound waves may be partially blocked or scattered by the wind, leading to a reduction in the volume of the sound that reaches you.
To know more about frequency, here
brainly.com/question/5102661
#SPJ4
the lowering of the water table around wells when water is pumped out of them is called a(n) ___.
The lowering of the water table around wells when water is pumped out of them is called "drawdown."
When a well is pumped, water is drawn out of the ground and the water level in the well drops.
This creates a "cone of depression" around the well, where the water table is lowered due to the pumping.
The size and shape of the cone of depression depends on the rate of pumping, the hydraulic conductivity of the aquifer, and the recharge rate of the aquifer.
The drawdown in the water table can have a number of effects on the surrounding environment, including reduced flow in nearby streams or rivers, lowered water availability for nearby vegetation, and even the drying up of nearby wells.
In addition, excessive drawdown can cause land subsidence and other geological hazards.
To summarize, the lowering of the water table around wells when water is pumped out of them is called drawdown.
It is caused by the removal of water from the aquifer, and can have a number of negative impacts on the environment and nearby infrastructure.
To know more about drawdown visit link :
https://brainly.com/question/14006584
#SPJ11
if the human body has an average density of 983 kg/m3 , what fraction of a person is submerged when floating gently in fresh water?
Roughly half of a person's body is submerged when they are floating gently in fresh water.
When an object is floating in water, it displaces an amount of water equal to its weight. If the weight of the displaced water is greater than the weight of the object, the object will float, and if it is less, the object will sink.
The fraction of a person that is submerged while floating in fresh water depends on the ratio of their weight to the weight of the water displaced by their body.
Assuming that the volume of a person is constant, we can calculate the weight of a person as:
Weight = density x volume x gravity
where:
density = 983 [tex]kg/m^3[/tex] (average density of human body)
volume = the volume of a person (assumed to be constant)
gravity = 9.81 [tex]m/s^2[/tex] (acceleration due to gravity)
Let's assume the weight of a person is 70 kg, then their volume would be:
Volume = Weight / (density x gravity)
Volume = 70 / (983 x 9.81)
Volume = 0.00716 [tex]m^3[/tex]
Now, let's consider the weight of the water displaced by the person's body. The weight of the water displaced is equal to the weight of the person, which is 70 kg.
Therefore, the fraction of the person's body that is submerged in water is:
Fraction submerged = Weight of water displaced / Total weight
Fraction submerged = 70 / (70 + weight of water in the submerged part of the body)
Since the person is floating gently in water, we can assume that only a small part of their body is submerged, and we can neglect the weight of water in the submerged part of the body.
Thus, we can approximate the fraction submerged as:
Fraction submerged ≈ Weight of water displaced / Total weight
Fraction submerged ≈ 70 / (70 + 70)
Fraction submerged ≈ 0.5 or 50%
Therefore, roughly half of a person's body is submerged when they are floating gently in fresh water.
Learn more about submerged
https://brainly.com/question/30690757
#SPJ4
a resistance r and a 3.2 h inductance are in series across a 60-hz ac voltage. the voltage across the resistor is 29 v and the voltage across the inductor is 33 v. assume that all voltages in this problem are rms voltages. (a) what is the resistance r?
The Resistance r is 56.97 ohms
To solve this problem, we can use Ohm's Law and the equation for the voltage across an inductor in an AC circuit.
First, let's find the current in the circuit. We know that the voltage across the series combination of the resistor and inductor is the sum of the voltage across the resistor (29 V) and the voltage across the inductor (33 V):
V_total = V_R + V_L
V_total = IR + IXL
where I is the current in the circuit, X_L is the inductive reactance (which depends on the frequency and inductance of the inductor), and R is the resistance.
Since the circuit is operating at a frequency of 60 Hz and the inductance is 3.2 H, we can find the inductive reactance using the formula:
X_L = 2πfL
X_L = 2π(60)(3.2)
X_L ≈ 120.96 Ω
Now we can solve the current:
V_total = IR + IXL
62 = I(R + 120.96)
I ≈ 0.509 A
Next, we can use Ohm's Law to solve for the resistance:
V_R = IR
29 = (0.509)R
R ≈ 56.97 Ω
Therefore, the resistance in the circuit is approximately 56.97 ohms.
Know more about Ohm's Law here:
https://brainly.com/question/14296509
#SPJ11
1. which angular velocity was non-zero and what was the sign? explain how this makes sense given the right-hand rule for the angular velocity.
Clockwise angular velocity was non-zero and had a positive sign. So, the correct answer is D.
The right-hand rule for angular velocity asserts that if the right hand's thumb is pointing in the direction of the axis of rotation, then the direction of the angular velocity vector is given by the direction in which the right hand's fingers curl.
This makes sense in this situation. As a result, the angular velocity vector will point in the same direction as the rotation's axis, and it will be positive when the angular velocity is positive.
In physics, engineering, and other sciences, the right-hand rule for angular velocity is a helpful tool for visualising the direction of the angular velocity vector.
This rule allows us to quickly ascertain the direction and sign of the angular velocity in any given situation.
Complete Question:
Which angular velocity was non-zero and what was the sign? Explain how this makes sense given the right-hand rule for the angular velocity.
A. Counterclockwise, Positive
B. Clockwise, Negative
C. Counterclockwise, Negative
D. Clockwise, Positive
To learn more about velocity visit:
https://brainly.com/question/80295
#SPJ4
the wheels of a powerful motorcycle can accelerate from rest to 72.0 rad/s in only 3.60 s. what is the average angukar acceleration
The average angular acceleration is 20 rad/s².
The issue is how quickly the wheels of a powerful motorcycle can accelerate from rest to 72.0 rad/s in 3.60 seconds. The following formula can be used to determine the wheels' average angular acceleration:
(Final angular velocity - Initial angular velocity) / time taken = Average angular acceleration
Here, the wheels begin at rest with a starting angular velocity of 0 rad/s, and the ultimate angular velocity is 72.0 rad/s. The time required is 3.60 seconds.
Thus, the wheels' average angular acceleration can be determined as follows:
(20.0 rad/s2) = (72.0 rad/s - 0 rad/s) / 3.60 s
As a result, the wheels' average angular acceleration is 20.0 rad/s². In each second of the acceleration period, the wheels of the motorcycle gain an average angular velocity of 20.0 radians per second.
Learn more about angular acceleration:
https://brainly.com/question/29428475
#SPJ4
how much work, in joules, is done in pushing a crate weight 842 n up an inclined plane that is 10 m long and makes an angle of 9 degrteesd with the horizontal?
The work done in pushing the crate up the inclined plane is 1428.7 joules.
To calculate the work done in pushing the crate up the inclined plane, we need to use the formula:
Work = force x distance x cos(theta)
Where:
force = the weight of the crate = 842 N
distance = the length of the inclined plane = 10 m
theta = the angle between the inclined plane and the horizontal = 9 degrees
First, we need to find the component of the weight that acts parallel to the inclined plane. This is given by:
force_parallel = force x sin(theta) = 842 N x sin(9 degrees) = 146.9 N
Next, we can find the force required to push the crate up the inclined plane. This is equal to the force parallel to the plane, since we are assuming no friction:
force_push = force_parallel = 146.9 N
Finally, we can calculate the work done by multiplying the force by the distance and the cosine of the angle:
Work = force_push x distance x cos(theta) = 146.9 N x 10 m x cos(9 degrees) = 1428.7 J
Therefore, the work done in pushing the crate up the inclined plane is approximately 1428.7 joules.
More on work: https://brainly.com/question/15119186
#SPJ11
HELP PLEASE Light travels to Earth from space as a/an_________wave.
O Mechanical
OSound
O Electromagnetic
O Longitudinal
Answer:
electromagnetic wave.
Explanation:
You can see light from the moon, distant stars, and galaxies because light is an electromagnetic wave. Electromagnetic waves are waves that can travel through matter or through empty space.
Answer: C) Electromagnetic wave
Explanation: It can't be D) Longitudinal because there is no such thing as a longitudinal wave that has to do with space. It wouldn't be mechanical cuz a mechanical doesn't have anything to do with light, neither sound.
Thus, the answer is C) Electromagnetic
a 10 kg sack slides down a smooth surface. if the normal force at the flat spot on the surface, a, is 98.1 n (5), the radius of curvature is ____.
The radius of curvature of the surface can be calculated using the given information of the normal force and the mass of the sack.
Here's the step-by-step explanation:
1) The normal force (N) acting on the sack is equal to the weight of the sack (W) when the sack is at rest or moving at a constant speed on a flat surface.
This can be represented by the equation N = W.
2) The weight (W) of the sack can be calculated using the formula W = mg, where m is the mass of the sack and g is the acceleration due to gravity (approximately 9.81 m/s^2).
3) Since the mass of the sack is given as 10 kg, its weight can be calculated as W = 10 kg x 9.81 m/s^2 = 98.1 N.
4) At the flat spot on the surface, the normal force is equal to the weight of the sack, which is given as 98.1 N.
5) As the sack slides down the surface, it will experience a centrifugal force due to the curved surface.
The magnitude of the centrifugal force can be calculated using the formula Fc = mv^2/r, where m is the mass of the sack, v is the velocity of the sack, and r is the radius of curvature of the surface.
6) Since the surface is smooth, there is no frictional force acting on the sack.
7) At the flat spot, the velocity of the sack is zero. As it slides down the surface, its velocity will increase.
8) When the sack reaches the curved portion of the surface, it will experience a centrifugal force that is equal in magnitude to the force of gravity (i.e., the weight of the sack).
9) Using the formula Fc = mv^2/r, and substituting the values of m, v, and Fc with the weight of the sack, the velocity of the sack can be calculated.
10) Once the velocity is known, the radius of curvature can be calculated using the formula r = mv^2/Fc.
11) Therefore, the radius of curvature of the surface can be calculated by substituting the values of m, v, and Fc with the weight of the sack and the given normal force (N = 98.1 N).
The radius of curvature can be calculated as r = (m x g)/(N/m) = (10 kg x 9.81 m/s^2)/(98.1 N/10 kg) = 1.0 meters.
In summary, the radius of curvature of the surface can be calculated as 1.0 meters, given that the normal force at the flat spot on the surface is 98.1 N and the mass of the sack is 10 kg.
To know more about Normal force refer here :
https://brainly.com/question/18799790
#SPJ11
A car with a mass of 1000 kg is traveling east at 4 m/s. Another car with a mass of 500 kg is traveling west at a speed of 3 m/s. The two cars collide. After the collision, the 1000 kg car has a velocity of 1 m/s east. What is the velocity of the 500 kg car after the collision?
Answer: the velocity of the 500 kg car after the collision is 3 m/s to the east.
Explanation:
Initial momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)
Initial momentum = (1000 kg x 4 m/s) + (500 kg x -3 m/s) (Note that we use a negative velocity for car 2 because it is traveling in the opposite direction)
Initial momentum = 4000 kg m/s - 1500 kg m/s = 2500 kg m/s
After the collision, the total mass and total momentum of the system remain the same.
Final momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)
Final momentum = (1000 kg x 1 m/s) + (500 kg x v) (where v is the velocity of the 500 kg car after the collision)
Final momentum = 1000 kg m/s + 500v
Since the total momentum is conserved, we can set the initial momentum equal to the final momentum:
Initial momentum = Final momentum
2500 kg m/s = 1000 kg m/s + 500v
Solving for v, we get:
v = (2500 kg m/s - 1000 kg m/s) / 500 kg
v = 3 m/s
??
when a high voltage is applied to a low-pressure gas, causing it to glow, it will emit what type of spectrum? a. li
When a high voltage is applied to a low-pressure gas and it starts to glow, it will emit an emission line spectrum.
This spectrum consists of bright, narrow lines at specific wavelengths, which are characteristic of the element or molecules in the gas. This is due to the electrons in the gas being excited to higher energy levels and then falling back down to lower energy levels, emitting photons of light at specific wavelengths corresponding to the energy differences between the levels. The resulting emission spectrum can be used to identify the elements or molecules present in the gas.
Learn more about spectrum
https://brainly.com/question/6836691
#SPJ4