Answer:
cool
Explanation:
1. As an electron in an atom moves from a higher energy state to a lower energy state, the atom
(A) becomes a negative ion
(C) releases energy
(B) becomes a positive ion
(D) absorbs energy
Answer:
(C) releases energy
Explanation:
From Bohr's model of the atom, we can understand the energy transitions involved when an electron moves from one energy level to another.
An electron in an energy level has a definite amount of energy associated with it at that level. When electrons change state, they must absorb or emit the exact amount of energy which will bring them from initial to final states. When the electron is excited, it moves from the ground state to an excited state, it must must absorb energy. On returning from an excited state, energy is emitted.(C) releases energy
From Bohr's model of the atom:
We can understand the energy transitions involved when an electron moves from one energy level to another.
An electron in an energy level has a definite amount of energy associated with it at that level. When electrons change state, they must absorb or emit the exact amount of energy which will bring them from initial to final states. When the electron is excited, it moves from the ground state to an excited state, it must must absorb energy. On returning from an excited state, energy is released or emitted.Therefore, option C is correct.
Learn more:
brainly.com/question/13822373
Order these chemical species by increasing of an aqueous solution of each. That is, imagine making an solution of each species. Select next to the species that makes the solution with the lowest . Select next to the species that makes the solution with the next higher , and so on. Notice that some of the rankings have been filled in for you already. Also notice that water is on the list. For that particular case, just compare the of pure water to the of the other solutions.
Species Relative PH of 0.1M aqueous solution
HCOOH
CIO2^-
HCOO^-
H2O
H3PO4
H2PO4
H2PO4^-
H3O^-
HClO2
Answer:
H3O^+ < HClO2 < H3PO4< HCOOH < H2PO4^-<CIO2^-<H2O< HCOO^-
Explanation:
The pH of a solution refers to the negative logarithm of it's hydrogen ion concentration. Generally, the hydrogen ion concentration of an acid is always greater than that of its conjugate base. Hence, the conjugate acid always has a lower pH than the conjugate base.
This can be seen in the species, H3O^+ and H2O, HClO2 and ClO2^- etc.
what is the density of if mass equals 4.98 volume is 5
Answer:
4.98/5 = 0.996 (don't forget to add your units)
Explanation:
Density= Mass/Volume
If your mass is 4.98_ (units of measurement are missing ) and your volume is 5 (units of measurement are missing) You plug the numbers into the equation:4.98/5= 0.996 (don't forget to add your units)
. If you apply heat to the copper bar, its density will
Answer:
Decrease
Explanation:
Density is defined as the mass per unit volume. Density is highly influenced by temperature.
The density of metals and copper is inversely proportional to the temperature, it means density of copper decreases with an increase in temperature or when heated. This is so because when the copper is heated, the copper atoms start vibrating faster that allows the collision of atoms with each other faster and occupying more volume than before. As the copper atoms occupy more volume, the density of copper decreases.
Hence, the correct answer is "On applying heat the density of copper decreases".
Which is the larger atom S or K
Answer:
I'm pretty sure k
Explanation:
I'm not for sure I'm trying to help
Answer:
Potassium
Explanation:
Atomic size decreases across a Period, from left to right as we face the Table, and INCREASES down a Group, a column of the Periodic Table.
What is the charge on an electron?
Answer:
Electrons have a negative charge
hope this was helpful (plz vote brainliest, I would appreciate it!) :)
If you are given 22.990 g of sodium and 12.011 g of carbon, which sample do you expect to have more particles?
Answer:
they are expected to have the same particles because their masses are the same with there molar mass
Which element in period 5 has the largest atomic radil
Answer:
francium is the answer
Explanation:
It should be noted that the element in period 5 has the largest atomic radius is Francium.
What is an atomic radius?It should be noted that an atomic radius simply means the measure of the size of the atom from the center of the nucleus.
In this case, the element in period 5 has the largest atomic radius is Francium while Helium has the smallest radius.
Learn more about atomic radius on:
https://brainly.com/question/15255548
PWEASE REVIEW ME AND ME MATES TEEF
D 14 3
N
7
What is the number of protons, neutrons, and electrons?
Answer:
14
Explanation:
For example, silicon has 14 protons and 14 neutrons. Its atomic number is 14 and its atomic mass is 28. The most common isotope of uranium has 92 protons and 146 neutrons. Its atomic number is 92 and its atomic mass is 238 (92 + 146).
Phosphorus and molecular oxygen combine to form diphosphorus pentoxide.
Write
a) the word equation
b) the skeletal equation
c) the reactant(s)
d) the product(s)
e) what type of reaction is this?
Answer:
b
Explanation:
because I really want to talk to you about it when I get home
What type of reaction heats the water to generate steam in a nuclear power plant
HELP PLEASE
Describe and illustrate how liquids are different then the other states of matter.
Explanation:
There are four natural states of matter: Solids, liquids, gases and plasma. ... Solids also have a high density, meaning that the particles are tightly packed together. Liquids. In a liquid, the particles are more loosely packed than in a solid and are able to flow around each other, giving the liquid an indefinite shape.
can someone help me im doing chemistry right now and I have a question which I have no idea how to solve and I need to show work it it needs to be shown in scientific notation
(7.6x10^-1)+(2.0x10^-2)
The human eye cannot see anything less than 40 micrometers in size. What is this length in meters?
Answer:
0.00004
Explanation:
i dont have one its just i know
Which of these are trends of elements as you go down a group?
a.. The atomic number increases.
b ...The number of electrons in the outermost shell increases.
c ...The number of filled electron shells increases.
d...The mass and size of the atoms increase
e...The elements change from being metallic to non-metallic.
Answer:
c. the number of filled electrons shells increases
Answer:
the answer is c
Calculate mass of an object if its density is 22.6 g/cm3 and it occupies volume of 5 cm3.
plz answer quickly if you know the answer... i will mark you brainliest! :)
Answer:
okay so I'm confused for the 5 cm3 but all you have to do is multiply those 2 numbers
Answer:
it is 113g
Explanation:
the formula you have to use here is mass=density*volume
sooo I multiplied it for u and gave the answer
What factor is mostly responsible for the form of matter?
time
temperature
pressure
weather
Temperature is mostly responsible for the form of matter. For instance, when raising the temperature you're adding energy. This energy gives the individual molecules and atoms the ability to overcome the forces that hold them together. This can be seen when a solid turns into a liquid or a liquid turns into a gas. However, when you're lowering the temperature you're removing energy. The lack of energy results in less movement from the atoms. Gases condense into liquid because the atoms don't have enough energy to stay away from each other. Liquids solidify because the atoms don't have enough energy to slide past each other and they get stuck in place. So in conclusion, temperature determines how how much energy atoms have that allow them to move at different speeds which determines the state of matter.
Which organism on the geologic time scale are now extict
Answer:The Ordovician and Cambrian Periods are referred to as the "age of invertebrates", with trilobites abundant. In this period, brachiopods became more abundant that the trilobites, but all but one species of them are extinct today.
Explanation:
What gets heavier in an electrochemical cell?
O A. The cathode
B. Negative ions
O C. The salt bridge
O D. The anode
Answer:
A. the cathode
Explanation:
Answer:
A. The cathode
Explanation:
a p e x
What else heats the Earth when Permafrost melts?
Answer:
As those microbes thrive, they will release large amounts of methane, another climate-warming greenhouse gas. ... By the year 2100, they estimated, thawing permafrost could release enough carbon dioxide and methane to raise the average global temperature by 0.13 to 0.27 degree C (0.23 to 0.49 degree F). pls mark me brainlest :(
Explanation:
The human eye cannot see anything less than 40 micrometers in size. What is this length in meters?
Answer:
4e-5 is the length in meters
Have a nice day! :)
Freezing point
Where would you place this property in the Venn diagram?
A pizza is an example of a heterogeneous mixture. Explain why it is classified as such?
Answer:
Hi!
So, a homogeneous mixture is when the parts that make up the mixture are all mixed in perfectly evenly, so they're only appearing as one uniform substance.
In a heterogeneous mixture, the pieces are not evenly mixed. A pizza has separate parts, like the crust and toppings, so it's a heterogeneous mixture.
7. The image shows the effects of exposing the plants to different color of
lights. The size of the plant was measured and the number of leaves were
counted if they are alive or dead. Size of plants and number of leaves are
Size of Plant
Number of Leaves
Living or Dead?
science or
What’s the answer?
Answer:
An apple, potato, and onion all taste the same if you eat them with your nose plugged
Explanation:
A sample of ammonia gas has a volume of 3213 mL at 11°C and a pressure of 822 torr. What will the volume of the gas be in liters if the
moles of gas and the temperature do not change but the pressure changes to 2.33 atm?
Answer:
We are given:
v1 = 3.2 L v2 = x L
p1 = 822 torr OR 1.08 atm p2 = 2.33 atm
t1 = t2 = 284 k
From the Ideal gas equation:
PV = nRT
Since the number of moles (n), universal gas constant (R) and Temperature (T) are constant
PV = k (where k is a constant)
it can also be written as:
P1V1 = k --------------------------(1)
Similarly,
P2V2 = k (where k is the same constant as before)----------(2)
Solving for V2:
From (1) and (2):
P1V1 = P2V2
Replacing the variables
1.08 * 3.2 = 2.33 * x
x = (1.08 * 3.2)/2.33
x = 1.5 L (approx)
Therefore, the final volume of the solution will be 1.5L
Mass can be changed into energy in a ____ reaction
A)Chemical
B)Nuclear
what is vascuoles ?
Answer:
Vacuoles are essentially enclosed compartments which are filled with water containing inorganic and organic molecules including enzymes in solution, though in certain cases they may contain solids which have been engulfed.
Explanation: i hoped this helped :)
Answer:
vacuole
Explanation:
a space within a cell that is empty of cytoplasm
vacuole is a membrane-bound
What is epithelial tissue characterized by?
closely packed cells
sarcomeres
many cell junctions
an extracellular matrix
Answer:
closely packed cells
many cell junctions
Explanation:
Answer:
A,B
Explanation:
EDGE2021
2. Using the following data, calculate the average atomic mass of magnesium (give your answer to the nearest
.01 ) : Show all work!
Isotope: Mg Percent abundance: 78.70%
24
Isotope: 'Mg Percent abundance: 10.13%
25
Isotope:
Mg Percent abundance: 11.17%
26
Answer:
24.32
Explanation:
From the question given above, the following data were obtained:
Isotope A:
Mass of A = 24
Abundance (A%) = 78.70%
Isotope B
Mass of B = 25
Abundance (B%) = 10.13%
Isotope C:
Mass of C = 26
Abundance (C%) = 11.17%
Average atomic mass of Mg =..?
The average atomic mass of Mg can be obtained as illustrated below:
Average atomic mass = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100]
Average atomic mass = [(24 × 78.70)/100] + [(25 × 10.13)/100] + [(26 × 11.17)/100]
= 18.888 + 2.5325 + 2.9042
= 24.3247 ≈ 24.32
Therefore, the average atomic mass of magnesium (Mg) is 24.32