Limestone is used in industry as a raw material in the production of slaked Ca (OH) 2.

1) Write the equations of the chemical reactions that characterize the transformations carried out in the production process!

CaCO3 -> CaO -> Ca (OH) 2

The first reaction equation is how calcium oxide can be obtained from calcium carbonate.

The second reaction equation - how calcium oxide can be obtained from calcium oxide.

Answer:

C

Explanation:

because an ice is a solid and when it melts it becomes a liquid

Answer:

C

Explanation:

1) Which example shows a change in a state

of matter?

A. Liquid pouring

2

B. Wood Burning

1

C. Ice Melting

C  when ice melts it goes from a solid to a liquid state

Answer:

see below

Explanation:

1. particle motion

2. The particles of a liquid can slide past one another.

3. the kinetic energy required to break forces between particles

4. increasing its temperature until it transitions from a solid to a liquid

5. A liquid becomes a gas.

[quizlet: captncrun]

Thermal energy is in the form of heat and light is always associated with the random motion of atoms and molecules. That form of kinetic energy is used to the rise in temperature.

Hence the option B is correct.

Learn more about the Thermal energy is associated with.

brainly.com/question/16953428.

Answer:

Answer:

Aluminium atoms =  4.13 *10^22 aluminium atoms

Explanation:

Explanation:

Step 1: Data given

Mass of Al2O3 = 3.50 grams

Molar mass of Al2O3 = 101.96 g/mol

Number of Avogadro = 6.022 * 10^23 /mol

Step 2: Calculate moles Al2O3

Moles Al2O3 = mass Al2O3 / molar mass Al2O3

Moles Al2O3 = 3.50 grams / 101.96 g/mol

Moles Al2O3 = 0.0343 moles

Step 3: Calculate moles Aluminium

In 1 mol Al2O3 we have 2 moles Al

in 0.0343 moles Al2O3 we have 2*0.0343 = 0.0686 moles Al

Step 4: Calculate aluminium atoms

Aluminium atoms =  moles aluminium * Number of Avogadro

Aluminium atoms =  0.0686 * 6.022 * 10^23

Aluminium atoms =  4.13 *10^22 aluminium atoms

Answer:

1.68 atm (if temperature is constant)

Explanation:

p1 * v1 = p2 * v2

1 * 2.85 = p2 * 1.70

2.85 / 1.70 = p2

p2 = 1.6764

There are so many gas laws like Charles's law, Avogadro’s law and many more, out of which Boyle's law is one of the most important law among all gas laws. The pressure is required to compress the balloon to a volume of 1.70L is  1.6764 atm.

According to Boyle's law pressure is inversely proportional to volume at constant Temperature. It is applicable only on the ideal gases. Since temperature is constant here, we can apply this law.

Mathematically

P₁V₁=P₂V ₂

P₁= initial pressure of balloon =1.0atm

V₁= initial volume balloon =2.85L

P₂=final pressure balloon =?

V ₂=final volume balloon =1.70L

Putting all values

1 × 2.85 = P₂×1.70

2.85÷ 1.70 = P₂

P₂ = 1.6764 atm

Therefore, the pressure is required to compress the balloon to a volume of 1.70L is 1.6764 atm.

To know more about Boyle's law, here:

https://brainly.com/question/1437490

#SPJ2

identify keys concepts/terminologies about solutions or concentration of solutions.

They are the two basic solution concentration terms that you need to know.We always need to keep an account of the amount of solute in a solution.The amount of solute in the solvent is what is called the concentration of a solution.In chemistry,we define concentration of solution as the amount of solute in a solvent.

Depending upon amount of solute present,it is called a dilute, concentrated or a saturated solution.Different substances in a given solvent have a different solubilities at the same temperature.The most common method for expressing the concentration of a solution is the percentage method

The six parts of DNA serially are A) adenine B) thymine C) Sugars D) Phosphate E) Guanine F) Cytosine.

DNA  is a hereditary material  which is present in human beings as well as all other living organisms.  Every cell which is present in an organism's body has DNA  which is the same. Most of the DNA is situated in the cell's nucleus and small amount of it can be found in the cell's mitochondria as well.

Information which is stored in DNA is stored as codes made up of four chemical bases namely, adenine, thymine , cytosine and guanine.Human DNA consists of 3 billion bases .The order of the bases determines information which is required for building and maintaining an organism.

DNA bases are capable of pairing up with each other. Adenine pairs with thymine and guanine pairs up with cytosine .Each base is also attached to a sugar molecule  and a phosphate group. A base, phosphate sugar are together called as nucleotides.

Learn more about DNA,here:

https://brainly.com/question/28481425

#SPJ2

Answer:

it may lead to read false measurements

while in an experiment.

that's what I think.

Answer:

3O2→ 2O3

Explanation:

by multiplying 2 by 3 we get 6 on both sides

Answer:

C

Explanation:

Mixture of 2 or more metals is a compound

example is water which is made up of hydrogen and oxygen.

Answer:

15ml

4HCl + 2Ba(OH)2 so moles ratio is 4:2

According to conservation of matter, there should be equal amounts of all elements on both the reactant and product side.

Reactant:

1 Ca

1 C

1 O

Product:

1 Ca

1 C

3 O

Therefore, your friend is right because the law of conservation of matter is not followed in this chemical equation.

Answer:

Mercury fulminate is very sensitive to shock, friction, and sparks. ... put mercury fulminate into blasting caps for detonating dynamite.

Explanation:

Phenol can form hydrogen bonds with water since it contains O-H group but nitrobenzene can not form hydrogen bonds with water.

Polar molecules tend to be soluble in water. The greater the dipole moment, the greater the polarity of the compound. We can see that  Nitrobenzene has a dipole moment of 4.2 x 10-9 esu cm while phenol has a dipole moment of 1.7 x 10-8 esu cm.

Now, It is confusing to observe that the solubility of Nitrobenzene  in water is far less than that of phenol despite its higher dipole moment. The reason for this observation is that, phenol can form hydrogen bonds with water since it contains O-H group but nitrobenzene can not form hydrogen bonds with water.

Therefore, phenol is more soluble in pure water as a solvent compared to nitorbenzene.

Learn more: https://brainly.com/question/967776

Answer:

The answer is C) It is given off as heat

Explanation:

        Definition of unavailable energy : energy that cannot perform work while under the current conditions; see also available energy, energy deterioration, and entropy.

       Energy can transform from more useful forms into less useful forms, but it cannot be created or destroyed. It turns out that some energy gets transformed into an useless form in every real-world energy transfer or transformation.

    Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organized molecular motion.

   What is Mcq for McVisible Energy? Available energy is the largest portion of low-grade energy (heat) that is available for conversion. The smallest amount of heat that needs to be rejected is referred to as unavailable energy.

     For the system with two heat reservoirs undergoing this irreversible heat transfer, entropy increases. We'll see that this implies that the ability to use the transferred energy for work has been lost. Energy is no longer available to perform work due to the increase in entropy.

To Learn more About unavailable energy, Refer:

https://brainly.com/question/8713296

#SPJ2

Answer:

30.8 percent quartz, 4.5 percent feldspar, 3.6 percent carbonate, <0.5 percent iron oxides, 60.9 percent clay minerals, 1 percent organic material, and 2 percent other materials.

Answer:

Add a volume of a solution of known concentration is added to a volume of another solution in order to determine its concentration. Solutions in which a few drops of phenolphthalein have been added turn from colorless to brilliant pink as the solution turns from acidic to basic.

If you want the method:

Method

1) Use a pipette and pipette filler to add 25 cm3 of alkali solution to a clean conical flask.

2) Add a few drops of a suitable indicator and put the conical flask on a white tile.

3) Fill the burette with dilute acid. Flush the tap through to remove any air bubbles. Ensure the burette is vertical.

4) Slowly add the acid from the burette to the conical flask, swirling to mix. (The mixture may at first change colour, and then back again when swirled.)

5) Stop adding the acid when the end-point is reached (when the colour first permanently changes). Note the final volume reading.

6) Repeat steps 1 to 5 until three results are repeatable (in close agreement). Ideally these should lie within 0.10 cm3 of each other.

I hope it helps.

Answer:

To conduct a titration experiment, first fill the burette with an acid or base solution of known concentration. After that, take a burette reading from the top of the miniscus down to the bottom. Then, underneath the burette, place a flask containing an unknown concentration of acid or base. After that, fill the flask halfway with the appropriate indicator and shake it up. Add your titrate to the flask one drop at a time while stirring constantly. Continue to add the titrate until the color change is noticeable. Finally, take one more look at the burette to make sure everything is correct.

Explanation:

Hope it helps:)

Answer:

13.C

14.B

15.C

16.Chemical element

Chemical Element are called substance or element that cannot be decomposed or broken down into simpler substances by ordinary chemical process.

Chemical elements are those elements which cannot be chemically broken down into simpler substances and are primary constituents of all matter. They are fundamental ingredients of all matter in existence which can be combined in reaction to create chemical substance each chemical element in the universe has unique properties that distinguish it from all of the Other chemical elements. For example hydrogen is an element.

Hope that helps

Answer:

the molar mass of Mg(NO3)2

the mass of the water added the density of the Mg(NO3)2

the volume of water used

Calculate the number of moles of Mg(NO3)2 used to make up this solution. 42.0 g of Mg(NO3)2 is equivalent to___ mol Mg(NO3)2.

Now calculate the molarity of the solution, giving your answer to the correct number of significant digits.

Molarity of Mg(NO3)2 = ___M

Answer:

True!

Explanation:

Avogadro’s law means that if we compare the number of helium molecules and the number of air molecules needed to inflate the same balloon, we would find the numbers the same.

The balloon filled with helium air, and the one blown by oneself with the same amount of air have the equivalent number of molecules. Thus, the given statement is true.

The moles are given as the mass of the compound with respect to the molar mass. According to the Avogadro's law, the 1 mole of a substance has the presence of the atoms equivalent to the Avogadro number.

In the balloons filled with oneself and individual there is same amount of gas, thus have same moles and thereby the number of molecules will be same in both the balloons. Thus, the given statement is true.

Learn more about volume of gas, here:

https://brainly.com/question/12357202

#SPJ2

Answer:

C6H5S^-

Explanation:

This is because you are removing the hydrogen to make it a conjugate base.

The formula for conjugate base of C6H5SH is C6H5S⁻.

Conjugate base is defined as the substance which is formed when an acid liberate its protons.

The acid donate protons and the acid changes into base.

Conjugate acid is defined as the pair of compound that differs by its protons by gaining protons.

Conjugate acid and base are based in acid base theory.

Thus, the formula for conjugate base of C6H5SH is C6H5S⁻.

To learn more about conjugate base, refer to the link below:

https://brainly.com/question/12883745

#SPJ2

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Let's consider the following neutralization reaction.

HCOOH + NaOH ⇒ HCOONa + H₂O

At the equivalence point, 0.25 M HCOOH completely reacted with 0.25 M NaOH to form 0.25 M HCOONa.

HCOONa undergoes hydrolysis. The net ionic equation is:

HCOO⁻(aq) + H₂O(l) ⇄ HCOOH(aq) + OH⁻(aq)

Given the concentration of HCOO⁻ is 0.25 M (Cb) and the basic dissociation constant of HCOO⁻ is 4.8 × 10⁻¹¹ (Kb), we can calculate the concentration of OH⁻ using the following expression.

[tex][OH^{-} ] = \sqrt{Kb \times Cb } = \sqrt{(4.8 \times 10^{-11} ) \times 0.25 } = 3.5 \times 10^{-6} M[/tex]

The pOH of the solution is:

[tex]pOH = -log [OH^{-} ] = -log (3.5 \times 10^{-6} ) = 5.5[/tex]

The pH of the solution is:

[tex]pH = 14 -pOH = 14 -5.5 = 8.5[/tex]

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Learn more: https://brainly.com/question/2728613

Answer:

A light bulb im guessing

Answer:

light bulb

Explanation:

when a light bulb is producing light it gets hot if you touch a light bulb while you will fill the heat

please choose my one as brainiest

Answer:

HBr

Explanation:

HBr (Hydrogen Bromide) is a polar molecule because of the unequal electronegativities of Hydrogen and Bromine atoms. Bromine has a higher electronegativity than hydrogen due to which electron bonded pair gets attracted slightly more towards bromine atom making HBr a polar molecule and resulting in a net dipole moment.

Answer:

It is most likely to be an asteroid

Answer:

LICL as an Ionic compounds has covalent ability and they are soluble in polar solvent such as CH3COCH3 but they are insoluble in non-polar solvents. Due to their polarity, CH3COCH3 will decreases the electrostatic forces of attraction thereby resulting in free ions in aqueous solution.

Water is the known as a polar solvent that can dissolve an ionic compounds very easy and as a polar solvent, the arrangement of oxygen and hydrogen atoms in water is in bent shape.

Ionic compounds like LICL that is very polar is soluble in the polar solvent water.

Polar solvents like CH3COCH3 will dissolve polar and ionic solutes because of the attraction of the opposite charges on the solvent and solute particles.

Learn more from

https://brainly.com/question/25422160

Explanation:

this question is in reference to the formation and naming of ionic compounds. Specifically, they want you to give examples of three ionic compounds with a metal to nonmetal ratio of 2 to 1. That means we need to have two metal atoms to metal ions, which are typically cat ions for every one non metal atom or an ion. In order for this to occur, we need to have the metal with half the charge of the nonmetal or the non metal with double the charge of the metal. So an example might be something like sodium sulfide. Sodium has one valence electron. It can give up sulfur needs to valence electrons in order to achieve an octet. So we need to. Sodium seems to give up one electron each to total so that sulfide can achieve an octet. Another one might be potassium oxide. Similar scenario. We've got potassium giving up one valence electron oxygen requiring too. So we need to potassium to supply the to valence electrons that oxygen needs to achieve an octet and lithium. Also in Group one A and alkali metal wants to give up just one valence electron to achieve an octet well to achieve, I guess a duet to be more like helium, and so it gives up one. If we have two of them, then we can provide the to valence electrons that sulfur needs. So this is sodium sulfide, potassium oxide and lithium sulfide. Remember when we name Ionic compounds? We named the Cat Ion with the name of the element and the anti on with the name of the Element, but with the ending oven of ID, a suffix of ID because each one of the cat ions donated their valence electrons to the anti on so the an ion could achieve an octet. Then all of the's will have an octet of valence electrons. Sulfur had six sodium had one. There were two of them, so we have a total of eight.

The metals that can form only one type of ion are Li, Al, Ca, Ba, Rb, W,Na, Mg and  Sr. They are called alkali metals.

Cobalt, Co is stable in both +2 and +3 oxidation state. So it can variable.

Lithium, Li only have +1 charge. So it is invariable from one compound to other.

Lead, Pb is variable as it has +2, +4 charge in which it is stable.

Pd has +2, +4 charge in which it is stable. So, It is variable.

Copper, Cu has +1, +2 charge. It is also variable. Potassium, K has only +1 charge. It is invariable. Aluminum, Al has only +3 charge. It is invariable.

Cesium, Cs is only stable in +1 charge. It is invariable. Molybdenum, Mo is stable in +4 and +6. It is variable. Calcium, Ca and Barium Ba are stable in +2 charge. It is invariable.

Rubidium, Rb is stable in +1 charge. It is invariable. Tungsten, W is stable in +6 charge. It is invariable. Iron, Fe is stable in +2, +3 charge. It is variable. Sodium, Na is stable in +1 charge. It is invariable. Mg and Sr are stable in +2 charge. It is invariable. Vanadium, V has +2, +3, +4, +5 charges. So, It is variable.

To know more about alkali metals

https://brainly.com/question/18153051

#SPJ3

Answer:

this is the answer

Explanation:

Neurons communicate with each other by sending chemical and electrical signals. Each neuron is connected with other neurons across tiny junctions called “synapses”. Impulses rush along tiny fibres, like electrical wires, from one neuron to the next. Electrical impulses travel through neurons.