Answer:
industrialization and rapid human population growth.
Explanation:
Hope this helps
Answer:
Water Pollution
Explanation:
Dumping industrial waste in ocean
Accidental oil leakages
Which of these challenges is unique to the process of designing prostheses as opposed to engineering other technologies?
- Knowing how a material will fail
- Using the engineering process
- Identifying a need for the technology
- Predicting how a technology will interact with human tissue
Answer:
predicting how a tech will interact with human tissue.
Explanation:
thats not really common except for in the medical field.
The challenge that is unique to the process of designing prostheses as opposed to engineering other technologies is Predicting how a technology will interact with human tissue. The correct option is option 4.
What is Prosthetic Design?Prosthesis design is typically undertaken by shaping wax on a plaster replica of the patient's anatomy. Realism is predominantly achieved through the prosthetist's ability to interpret the correct location and physically recreate the anatomical shape and detail.
Prosthetic applications are an example of the intersection of design, technology and science.
Therefore, The challenge that is unique to the process of designing prostheses as opposed to engineering other technologies is Predicting how a technology will interact with human tissue. The correct option is option 4.
Learn more about Prosthetic Design, here:
https://brainly.com/question/20548709
#SPJ3
If the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture in a buret
Answer:
f the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture
Partial pressure of H2 in gas mixture is :
739.765 torr .
Explain total pressure?The overall pressure ptot is the total of all pressures in a reference system. This pressure, according to Bernoulli (see Fluid mechanics), consists of the static pressure p, the dynamic pressure pdyn, and the geodetic component ( g z) that exists in a fluid along a stream line in a frictionless flow.The total pressure of a gas mixture is the sum of its component gases' partial pressures: Ptot = ∑Pi = P1 + P2 + P3... ntot = total number of moles in the gas mixture (the sum of all ni).Total pressure of mixture =
Partial of hydrogen + Partial pressure of oxygen
Partial of Hydrogen = Total pressure - partial pressure of oxygen
Here total pressure = 757.3 torr
Partial pressure of oxygen = 17 . 535 torr
Total pressure = 757 . 3 - 17 . 533
= 739.765 torr.
To learn more about total pressure refer to :
https://brainly.com/question/22264785
#SPJ2
Gold has a specific heat of 0.126 J/g.C. Copper has a specific heat of 0.386 J/g C. Which of the two metals would require more
heat energy to raise the temperature of the same weight of metal by 10.5C?
Answer:
The copper, because its specific heat is higher, meaning it takes more heat (Joules) per gram to raise the temperature 1 degree Celsius.
Explanation:
WILL BRAINLIST! NEED ANSWER!
• Why is it important to recycle metals?
A. to maintain sustainability
B. to create more tailings
C. to make sure ore remains renewable
D. to make it easier to extract ore from the ground
A candle is placed between a concave mirror and its focal point.
Which two of the following best describe the image?
O A. Enlarged
B. Virtual
C. Reduced
D. Real
Virtual and enlarged..............
What grade are you in btw ?
Octane has a density of 0.703 g/ml. Calculate the mass of CO2(g) produced by burning one
gallon of octane. There are 3.79 liters to one gallon.
The mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.
The given parameters:
Density of the octane, ρ = 0.703 g/mlVolume of octane, v = 3.79 litersThe mass of the octane burnt is calculated as follows;
[tex]m = \rho V\\\\m = 0.703 \ \frac{g}{ml} \times 3.79 \ L \ \frac{1000 \ ml}{L} \\\\m = 2,664.37 \ g[/tex]
The combustion reaction of octane is given as;
[tex]2C_8H_{18} + \ 25O_2 \ --> \ 16CO_2 \ + \ 18H_2O[/tex]
From the reaction above:
228.46 g of octane -------------------> 704 g of CO₂ gas
2,664.37 of octane --------------------> ? of CO₂ gas
[tex]= \frac{2,664.37 \times 704}{228.46} \\\\= 8,210.3 \ g\\\\= 8.21 \ kg[/tex]
Thus, the mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.
Learn more about combustion of organic compounds here: https://brainly.com/question/13272422
A solution that contains 3 grams of solute dissolved in 100 millimeters of solution is:
a) 3% m / m
b) 3% m / v
c) 10% m / v
Answer:
the answer is correct part another is a part
Explanation:
c part
help please I'll mark you as a brainliest promise.
Answer:
Law of the Sea Treaty
LOST Local Option Sales Tax (special purpose tax)
LOST Linux One Stanza Tips
LOST Liberty Owners Special Team
LOST Looking Over Strange Terrain :-)
LOST Line Of Sight Tasking
Explanation:is this what you meant?
Aqueous sodium phosphate and aqueous iron (III) chloride react to produce aqueous sodium chloride and solid iron (III) phosphate.
Answer:
this one is hard
Explanation:
but it's iron because the sodium so yea there u go.
NEED HELP ASAP WILL GIVE BRAINLIEST
Answer:
First we know that the molar mass of CO2 is 44.01g/mol, and that the sample of CO2 contains 3.408 x 10^21 molecules, and we have to find the mass of that sample.
We know that moles = mass/molar mass, if we rearrange the equation for mass, we'll get:
mass = moles x molar mass
Also, note that the number of atoms/molecules in a sample is the moles of the sample x Avogadro's number (6.02 x 10^23)
If we rearrange the equation for moles, we would get:
moles = molecules of sample/6.02 x 10^23
Plug in the values for the equation above to get the moles:
moles = (3.408 x 10^21)/(6.02 x 10^23)
moles = 0.00566112956 (we're not done yet)
Now that we have the moles and we were already provided the molar mass, we can calculate the mass using the very first equation we rearranged.
mass = moles x molar mass
mass = 0.00566112956 x 44.01
mass = 0.2491g (answered 4 places past the decimal point)
Therefore the sample of Carbon Dioxide has a mass of 0.2491g
If there is a name/surname you can't make out due to a speaker's manner of speech, what are you supposed to do?
We can call a person by the word gentleman and Sir or from his/her real name.
If there is a name/surname you can't make out due to a speaker's manner of speech then I will call him gentleman or Sir or I will ask him his real name. Gentleman is a word that is used for noble person and Sir word is also used in order to give someone respect.
Call a person with his real name is also comes under the manner of speech so we can conclude that we can call a person by the word gentleman and Sir or from his/her real name.
Learn more about manner of speech here:
Learn more: https://brainly.com/question/26023566
How many moles of CH, are present in a 13982.87 gram sample of CHg?
OOO OOO
Water's strong hydrogen bonds result in which physical properties? Check all that apply.
high boiling point
low boiling point
high specific heat
low specific heat
density of ice being less than that of liquid water
density of ice being greater than that of liquid water
a meter is defined as 100. cm. How many significant digits are there in the value
Answer:
3 significant figure
Explanation:
Trailing zeros in a number are significant ONLY is the number contains a decimal point.
So if it was 100cm with out the decimal point would only have 1 significant figure.
need answer asap ..
-20 points! asap please ..
Answer:
[tex][tex]\purple{\rule{45pt}{7pt}}\purple{\rule{45pt}{999999pt}}[tex][/tex]
Explanation:
[tex][tex]\purple{\rule{45pt}{7pt}}\purple{\rule{45pt}{999999pt}}[tex][/tex]
Which phenomena does wind cause?
A)tides and waves
B)deep currents and tides
C)waves and surface currents
D)surface currents and deep currents
HELP PLEASE ILL GIVE OUT BRAINLIEST
The phenomena which wind causes are waves and surface currents.
What are surface currents?
Surface currents are caused by winds which blow over the ocean water and result in creation of waves. Surface currents are horizontal streams of water which are capable of flowing thousands of kilometers and can reach great depths.
Surface currents play a major role in determining the climate all over the world. They are influenced by three major factors 1) overall global wind patterns 2)rotation of earth 3)shape of ocean basins . When a surface current collides with the land it changes the direction of currents.
Because of surface currents the global climate has warmer water from equator to the cooler parts of the ocean as they transfer heat energy.
Learn more about surface currents,here:
https://brainly.com/question/1255202
#SPJ2
What is the molarity of the nitric acid solution if 20.5 mL of a 0.125 M lithium hydroxide solution are needed to titrate a 25.0 mL sample of the nitric acid solution
Answer:: We're asked to find the molar concentration of the NaCl solution given some titration data.
Explanation:
What equipment is generally used to make lyophilized medications suitable for administering to the patient? a) Test tubes or sterile ampules O b) Petri dishes and sterile droppers c) Sterile syringes or graduated cylinders d) Measuring cups and clean, warm water
describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).
Answer:
Molecules don’t have to collide with each other in order to experience intermolecular forces.
Molecules with permanent dipoles, held in fixed orientation, such as water molecules in the solid state (ice), interact with a potential proportional to the inverse cube of distance. This intermolecular force always exists, no matter how far apart the molecules are; every water molecule interacts with every other water molecule. However, because it diminishes rapidly with distance, it tends to only be important at short distances. (In contrast, the potential between two ions goes as 1/r, and that between an ion and a dipole goes as 1/r^2.)
The van der Waals forces, of which London dispersion forces are the most important, are described by a potential proportional to the inverse sixth power of distance. Theoretically, those forces are always operating between any two atoms or molecules, but again, only become important at short distances.
Explanation:
hope this helps
I NEED HELP!!OMG OMG OMG
Winter is purple, spring is blue, summer is orange, fall is green.
what substance changes directly solid to gas
3 examples
Answer:
Air FreshenersSpecialized PrintersMoth Balls
what is the mass number of an atom that has six protons. six electrons, and eight neutrons?
Mass number is the sum of the total number of nucleons (neutrons + protons) present in the atom.
Mass number = Protons + Neutrons
Mass number = 6 + 8
Mass number = 14
_______
Hope it helps ⚜
Please answer!!
No links.
Picture is included!
Answer:
c
Explanation:
Predict the decay process and write the nuclear equation of Cf- 255
Answer:
curium
−
243
,
252
/
99
Es,
251
/
98
Cf,
214
/
82
Pb
Explanation: Im not very good with this but here ya go!
How many molecules are there in an ideal gas with a volume of 7.27 L at STP?
number of molecules:
Answer:
n = 0.324 mol
Explanation:
PV = nRT
STP:
273.15K and 101.325kPa
n = PV/RT
n = (101.325kPa)(7.27L)/(8.314 L kPa/mol K)(273.15K)
n = 0.3243693408 mol
n = 0.324 mol
Hope that helps
Which law states that energy cannot be created or destroyed, but can change from one form to another?
- the law of conservation of energy
- the law of conservation of matter
- the law of gravity
- the law of motion
answer - (the law of conservation of energy)
Answer:
the law of conservation of energy
In lab a student is asked to mix solutions of copper (II) sulfate and potassium phosphate. The
student wants to produce exactly 3.75 grams of precipitate. Based on the desired outcome
determine the volume of 1.25M copper (Il) sulfate and 0.75 M potassium phosphate required.
I believe the volume would turn out to be 2.35M but i could be wrong
why brain remembers picture better than words?
Answer:
your brain processes ever detail in a picture rather than words for for example a picture of something words doesn't describe it as well as the picture could.
If 9 moles of P203 are formed, how many
moles of O2 reacted?
How do molecules work?
A molecule is essentially created by a collection of atoms linked by a network of bonds.