Answer:
This article throws light upon the four main laws of radiation. The laws are: 1. Kirchoff's Law 2. Stefan-Boltzman's Law 3. Planck's Law 4. ...
Frequency (f):
Time period (τ):
Wave number:
Speed of light (C):
Wave amplitude (A):
Energy, Wavelength and Temperature:
It is given by the following equation:
which equation is correctly balanced for hydrogen and oxygen reacting to form water?
A. H2+O2–> H2O
B. 2H2+ O2–>2H2O
C. 4H+O2–>2H2O
D. H2+O—> H2O
The correct balanced equation for hydrogen and oxygen reacting to form water is 2H₂ + O₂ ⇒ 2H₂O₂. Therefore, option B is correct.
What is balanced equation ?Chemical equations are symbols and chemical formulas that depict a chemical reaction symbolically. Because mass cannot be generated or destroyed, according to the rule of conservation of mass, a chemical equation must always be in balance.
Equal numbers of atoms from various elements are present in both the reactants and the products in balanced chemical equations.
The left and right sides of the reaction arrow of a balanced equation have an equal number of each type of atom. The reactants and products are placed on the left and right sides of the arrow, respectively, to create a balanced equation.
Thus, The correct balanced equation for hydrogen and oxygen reacting to form water is 2H₂ + O₂ ⇒ 2H₂O₂. Therefore, option B is correct.
To learn more about balanced equation, follow the link;
https://brainly.com/question/7181548
#SPJ2
In a titration, a few drops of an indicator are added to a flask containing 35.0 milliliters of HNO3(aq) of unknown concentration. After 30.0 milliliters of 0.15 M NaOH(aq) solution is slowly added to the flask, the indicator changes color, showing the acid is neutralized.
What are the products of this reaction?
Answer:
NaOH(aq) + HNO3(aq)------>NaNO3(aq) + H2O(l)
Explanation:
A thing to note is that an acid and a base will react to form a metal salt + H2O.
~Hope it helps:).
In titration, when [tex]HNO_{3}[/tex] added to NaOH in then it will form [tex]NaNO_{3}[/tex] and water.
What is titration?Titration is just a laboratory technique for determining the concentration of an unknown solution using a solution of given volume and concentration. Between the two solutions, redox reaction or acid-base neutralization occurs, and the known numbers are used to calculate the unknown.
In titration, when [tex]HNO_{3}[/tex] is added in a base like NaOH then it will form it will form [tex]NaNO_{3}[/tex] and water.
The reaction of the titration can be written as:
NaOH + [tex]HNO_{3}[/tex] → [tex]NaNO_{3}[/tex] + [tex]H_{2}O[/tex].
To know more about titration click here.
https://brainly.com/question/16254547.
#SPJ2
The _______________________ regulates water quality, air pollution, and solid waste to protect Americans from significant risks to human health and the environment. F from the land, forming nitrogen-rich algae blooms
Answer:
EPA
Explanation:
In the United States of America, the agency which was established by US Congress and saddled with the responsibility of overseeing all aspects of pollution, environmental clean up, pesticide use, contamination, and hazardous waste spills is the Environmental Protection Agency (EPA). Also, EPA research solutions, policy development, and enforcement of regulations through the resource Conservation and Recovery Act.
In conclusion, the Environmental Protection Agency (EPA) regulates water quality, air pollution, and solid waste to protect Americans from significant risks to human health and the environment.
chemical formula is given.
CO→C+O
What does the formula describe?
A.
It describes a mixture being separated by a physical process.
B
It describes an atom being separated by a chemical process.
C
It describes an element being broken down into the atoms from which it was formed.
D
It describes a compound being broken down into the elements from which it was formed.
Answer:
D . It describes a compound being broken down into the elements from which it was formed.
Explanation:
A compound consists of two or more elements chemically combined together in a chemical reaction. The compound carbon monoxide is represented by the chemical symbol, CO. This means that it contains 1 atom of the carbon element and 1 atom of the Oxygen element.
This compound is formed when carbon is directly oxidized in a limited supply of oxygen. In the above reaction, this compound is disintegrated into its individual components, namely, carbon and oxygen.
what mass of chlorine gas is contained in a 10.0 L tank at 31.0° C and 3.50 atm?
Un profesor desea preparar una disolución de agua oxigenada al 20%v/v y dispone solamente de 50 cm3 h2o2 ¿qué volumen d disolución deberá preparar? Con procedimiento
Answer:
250cm³ de disolución se deben preparar
Explanation:
El porcentaje volumen volumen (%v/v) se define como el volumen de soluto -En este caso, H2O2- en 100cm³ de disolución.
Se desea preparar una solución que contenga 20cm³ de H2O2 por cada 100cm³
Como solamente se cuenta con 50cm³ de H2O2, el volumen que se debe preparar es:
50cm³ H2O2 * (100cm³ Disolución / 20cm³ H2O2) =
250cm³ de disolución se deben prepararIf a gas occupies 1.5 liters at a pressure of 3.0 atm, what will be its pressure at a volume of 2.0 liters?
Answer:
P2 = 2.25 atm
Explanation:
Given:
V1 = 1.5 L. V2 = 2.0 L
P1 = 3.0 atm. P2 = ?
Use Boyle's law and solve for P2:
P1V1 = P2V2
or
P2 = (V1/V2)P1
= (1.5 L/2.0L)(3.0 atm)
= 2.25 atm
What is the molarity of a sodium hydroxide solution if 25 mL of the solution is neutralized by 69.5 mL of 1.5 M HCl?
Answer:
4.17M
Explanation:
m1v1/m2v2=n1/n2
can someone help me with these answer becuz im struggling sorry
Answer:
21.8
Explanation:
add both because there both forces are going down
Coffee or tea with sugar dissolved in it is an example of a water-based solution. Coffee in this case is the __________________, sugar is the _________________, and this means that the sugar molecules must be __________________.
Answer:
Solvent; solute; hydrophilic.
Explanation:
Solubility is a term used to describe how readily a substance can be dissolved in a solvent to form a solution. Thus, a substance is said to be soluble if it dissolves completely in a solvent and insoluble if it doesn't dissolve or only dissolves partially.
In Chemistry, dissolution can be defined as the process of dissolving or dissociating a solute in solid, liquid or gaseous phase into fragmented particles by a solvent in order to form a solution. For dissolution to occur in solids, the crystalline structure of the substance must be broken up so as to release ions, atoms or molecules to produce a solution. For liquid and gases, the substance to be dissolved must form a non-covalent bond with the solvent to produce a solution.
Hence, during the process of dissolution the solute maybe completely ionized, partially ionized, or it may remain intact.
For example, coffee or tea (liquid or solvent) with sugar (solid or solute) dissolved in it is a water-based solution.
In this scenario, coffee is the solvent, sugar is the solute, and this means that the sugar molecules must be hydrophilic because it has a degree of affinity for water i.e it is able to absorb some amount of water.
A solute can be defined as a substance that is typically dissolved in a liquid solvent such as water, coffee, tea, etc., to produce a solution.
On the other hand, a solvent is any liquid such as water, coffee, tea, etc., that dissolves a liquid, gaseous, or solid solute to produce a solution.
what is difference between asexual or sexual reproduction
Explanation:
asexual reproduction involves 1 parent and produces offspring that are genetically identical to each other and parent.
Sexual reproduction involves 2 parents and produces offspring that are genetically unique.
How many moles of water can be produced with 4.3 moles of H2 and 5.6 moles of O2? Which reactant is limiting? How many moles of the excess reactant will be left after the reaction? 2 H2 + O2 2 H2O
Answer:
Hydrogen H₂ will be the limiting reagent.
The excess reactant that will be left after the reaction is 3.45 moles.
4.3 moles of water can be produced.
Explanation:
The balanced reation is:
2 H₂ + O₂ → 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:
H₂: 2 moles O₂: 1 mole H₂O: 2 molesTo determine the limiting reagent, you can use a simple rule of three as follows: if by stoichiometry 1 mole of O₂ reacts with 2 moles of H₂, how much moles of H₂ will be needed if 5.6 moles of O₂ react?
[tex]moles of H_{2} =\frac{5.6 moles of O_{2} *2 mole of H_{2} }{1 mole of O_{2}}[/tex]
moles of H₂= 11.2 moles
But 11.2 moles of H₂ are not available, 4.3 moles are available. Since you have less moles than you need to react with 5.6 moles of O₂, hydrogen H₂ will be the limiting reagent and oxygen O₂ will be the excess reagent.
Then you can apply the following rules of three:
If by reaction stoichiometry 2 moles of H₂ react with 1 mole of O₂, 4.3 moles of H₂ will react with how many moles of O₂?[tex]moles of O_{2} =\frac{1 mole of O_{2} *4.3 mole of H_{2} }{2 mole of O_{2}}[/tex]
moles of O₂= 2.15 moles
The excess reactant that will be left after the reaction can be calculated as:
5.6 moles - 2.15 moles= 3.45 moles
The excess reactant that will be left after the reaction is 3.45 moles.
If by reaction stoichiometry 2 moles of H₂ produce 2 moles of H₂O, 4.3 moles of H₂ produce how many moles of H₂O?[tex]moles of H_{2}O =\frac{2 moles of H_{2}O *4.3 mole of H_{2} }{2 mole of H_{2}}[/tex]
moles of H₂O= 4.3 moles
4.3 moles of water can be produced.
The ________
have no charge but
weigh a lot compared to the________.
Answer:
The neutrons have no charge
Explanation:
im not sure about the second part. good luck
Answer:
The "Neutron" has no charge but weigh a lot compared to the "Electron"
Explanation:
A molecule with one lone pair and three bond pair
▪︎Ammonia
▪︎carbon tetrachloride
choose correct option
It's ammonia (NH3).....
Answer:
A molecule with one lone pair and three bond pair
- Ammonia
In the unbalanced chemical equation shown below, what is the coefficient of aluminum (AI) metal?
Al(s) + O2(g) → Al2O3(s)
Answer : A. 3
Explanation:
3Al(s) + 3O2(g) → 3Al2O3(s)
This is the right Answer :3
I hope you are having a great day :3
When something is hot , its atom has more energy
True or False
Will mark as brainliest if the answer is correct
If the solubility of a gas in water is 3.0 g/L when the pressure of the gas above the water is 4.0 atm, what is the pressure of the gas above the water when the solubility of the gas is 1.0 g/L
Answer:
[tex]P_2=1.3atm[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to model the solubility and pressure of the gas, by knowing that the greater the pressure, the greater the solubility, so that the suitable equation is:
[tex]\frac{P_2}{s_2}=\frac{P_1}{s_1}[/tex]
In such a way, we will be able to calculate the pressure of the gas by solving for P2 as shown below:
[tex]P_2=\frac{P_1*s_2}{s_1} \\\\[/tex]
And finally plug in the given data to obtain:
[tex]P_2=\frac{4.0atm*1.0g/L}{3.0g/L}\\\\P_2=1.3atm[/tex]
Regards!
Which of the following is NOT one of the three main global climate zones?
A. Tropical
B. Latitude
C. Polar
D.Temprate
which of the four substances listed will dissolve in water and why?
Answer:
Sugar, sodium chloride, and hydrophilic proteins are all substances that dissolve in water. Oils, fats, and certain organic solvents do not dissolve in water because they are hydrophobic.
And, water is called the "universal solvent" because it dissolves more substances than any other liquid. ... Water molecules have a polar arrangement of the oxygen and hydrogen atoms—one side (hydrogen) has a positive electrical charge and the other side (oxygen) had a negative charge.
I don't see any options so there i hope it helps .
The diagram shows the water cycle. At point 4, condensation is occurring. How is water changing?
A) Water vapor (gas) is becoming liquid.
B) Water is being stored in the atmosphere.
C) Liquid water in the atmosphere is becoming a gas.
D) Liquid water from the earth's surface is becoming water vapor (gas)
Answer:
water vapor (gas) is becoming liquid
Name the layers of the atmosphere and one fact about each layer.
In a ______, molecules are close together and vibrates but do not flow
Answer:
solid state
Explanation:
solid particles are close to each other , they vibrate for motion
Can you pls answer This question
Answer:
a) pentane
b) 1,3-dimethyl butane
c) 3,4-diethyl-5-methlyl heptane
d) 1,3,5-triethyl-2,4,6-trimethyl cyclohexane
Explanation:
The essence of IUPAC nomenclature is to provide a generally accepted nomenclature for chemical compounds which enables the structure of a compound to be drawn from its name without ambiguity.
In order to name straight chain organic compounds, we have to identify the parent chain and then give numbers to the substituents or locants such that they have the lowest possible numbers in alphabetical order.
The correct names of the organic compounds in the question are;
a) pentane
b) 1,3-dimethyl butane
c) 3,4-diethyl-5-methlyl heptane
d) 1,3,5-triethyl-2,4,6-trimethyl cyclohexane
balance
Al(OH)3 + H2SO4 → Al2(SO4)3 + H2O
Equation balance:
2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2O
2Al(OH)3+3H2SO4
H=12
SO4=3
O=6
Al=2
Al2(SO4)3+6H2O
H=12
SO4=3
O=6
Al=2
Calculate the grams of O2 produced from 25.55 grams of KClO3. Round to the nearest whole number.
2KClO3 → 2KCl + 3O2
Answer:
[tex]1\ \text{gram}[/tex]
Explanation:
Mass of [tex]KClO_3[/tex] = 25.55 gram
Molar mass of [tex]KClO_3[/tex] = 122.5 g/mol
Molar mass of [tex]O_2[/tex] = 32.2 g/mol
The decomposition reaction is
[tex]3KClO_3\rightarrow 2KCl+3O_2[/tex]
The mass of [tex]O_2[/tex] produced would be
[tex]2.5\times \dfrac{1}{122.5}\times \dfrac{3}{2}\times 32=0.9795\approx 1\ \text{gram}[/tex]
The mass of [tex]O_2[/tex] produced is [tex]1\ \text{gram}[/tex].
5. Determine if a precipitation reaction occurs between aqueous silver nitrate and aqueous calcium chloride. If a
precipitation reaction takes place, write a balanced chemical equation, total ionic equation and net ionic
equation for the reaction. Identify any spectator ions.
a. Balanced chemical equation: (3 marks)
b. Total ionic equation: (2 marks)
C. Net ionic equation: (1 mark)
d. Spectator ions: (1 mark)
Answer:
See Explanation
Explanation:
a) In writing the balanced chemical reaction equation, the number of atoms of each element on the right hand side must be the same as the number of atoms of each element on the left hand side. The balanced reaction equation is;
2AgNO3(aq) + CaCl2(aq) ------> 2AgCl(s) + Ca(NO3)2(aq)
b) The total ionic equation shows all the ions present in the reaction system as follows;
2Ag^+(aq) + 2NO3^-(aq) + Ca^2+(aq) + 2Cl^-(aq) ---->2AgCl(s) + Ca^2+(aq) + 2NO3^-(aq)
c) The net ionic equation shows the ions that really participated in the reaction;
2Ag^+(aq) + 2Cl^-(aq) ---->2AgCl(s)
d) The spectator ions didn't undergo any change from left to right in the reaction equation. They include;
NO3^-(aq) and Ca^2+(aq)
La rapidez de una reaccio es 0,450 mol/s ¡cuanto tiempo, en segundos, serán necesarios para que se consuman 0,323 mol de reactivos
Answer:
[tex]tiempo=0.72s[/tex]
Explanation:
¡Hola!
En este caso, como podemos observar, la relación entre la rapidez de reaction, las moles y el tiempo de reacción es:
[tex]rapidez=\frac{mol}{tiempo}[/tex]
De este modo, despejamos el tiempo en esta ecuación para obtener:
[tex]tiempo=\frac{mol}{rapidez}[/tex]
Así, reemplazamos la rapidez y moles dadas para obtener:
[tex]tiempo=\frac{0.323mol}{0.450mol/s}\\\\tiempo=0.72s[/tex]
¡Saludos!
What is the relative formula mass of a compound?
Answer:
To find the relative formula mass (M r) of a compound, you add together the relative atomic mass values (A r values) for all the atoms in its formula.
Explanation: Find the M r of carbon monoxide, CO. Find the M r of sodium oxide, Na 2O. The relative formula mass of a substance, shown in grams, is called one mole of that substance.
What is the nature of the soil depends on ?
Answer:
Well i dk know this question i think we need soil because plants need soil so they can provide oxegon
Explanation:
If 40 grams of NH3 are dissolved in 100 mL of water at 10 degrees Celsius, how many more grams of NH3 would I need to add to make this a saturated solution?
Which one is it?
25 g
30 g
20 g
0 g