Based on the steps for solving the equation, a true statement include the following: A. there are infinitely many solutions to the equation.
What is no solution?In Mathematics, no solution is sometimes referred to as zero solution, and an equation is said to have no solution when the left hand side and right hand side of the equation are not the same or equal.
What are infinitely many solutions?In Mathematics, an equation is said to have an infinitely many solution when the left hand side and right hand side of the equation are the same or equal:
3x - 9x + 1 = 2(-3x + 1) - 1
-6x + 1 = -6x + 2 - 1
-6x + 1 = -6x + 1
When x = 1, we have:
-6(1) + 1 = -6(1) + 1
-5 = -5.
When x = 2, we have:
-6(2) + 1 = -6(2) + 1
-11 = -11.
Read more on equation here: brainly.com/question/28148072
#SPJ1
A health and fitness club surveys 40 randomly selected members and found that the average weight of those questioned is 157lb. Is this a statistic or a parameter?
This average will be an example of statistics.
Let’s look at our question:
An example of a statistic is the average weight of those surveyed, which was 157 lbs., from a survey of 40 randomly chosen members of a health and fitness club. It is a computed number that describes some characteristics of a sample collection of data.
What is Statistic?
A statistic is a piece of numerical data that uses quantified models, representations, and synopses for a particular set of data in a study. Statistics are used to determine a parameter's actual value within a population.
Therefore our question will be an example of statistics.
To learn more about Statistic and Parameter, visit:https://brainly.com/question/15077367
#SPJ4
Un automóvil tiene una velocidad inicial de 5 m/s, durante 10 segundos , acelera 2m/s2 ¿cuál es su velocidad final en m/s?
The final velocity of the car is of:
25 m/s.
How to model the velocity?The velocity function is a linear function, modeled as follows:
v(t) = v(0) + at.
In which:
The initial velocity v(0) is the intercept of the linear function.The acceleration a is the slope of the linear function.The parameter values for this problem are given as follows:
Initial velocity of v(0) = 5.Acceleration of a = 2.Hence the velocity function is given as follows:
v(t) = 5 + 2t.
At a time of 10 seconds, the velocity is given as follows:
v(10) = 5 + 2(10)
v(10) = 25 m/s.
TranslationThe car has an initial velocity of 5 m/s, and an acceleration of 2 m/s² during 10 seconds.
More can be learned about linear functions at https://brainly.com/question/24808124
#SPJ1
consider the following equations, where x is a position, v is a velocity, a is an acceleration, and t is a time. using dimension analysis, find what quantity is described by the equation?
Quantity described by the given equations are as follow :
1. ( 1/2)at² represents the option a. position.
2. x /t represents the option b. velocity.
3. vt represents the option a. position.
4. at represents the option b. velocity.
Description of the equations as per the mentioned quantity are given by :
Here 'x' represents the position , 'v' represents the velocity,
'a' represents the acceleration , 't' is the time.
1. ( 1/2)at²
Unit of acceleration 'a' is m/sec² , time 't' is sec.
Simplified unit of ( 1/2)at² is m which represents position 'x'.
2. x /t
Unit of position 'x' is m, time 't' is sec.
Simplified unit of ( x/t) is m/sec which represents velocity 'v'.
3. vt
Unit of velocity 'v' is m/sec , time 't' is sec.
Simplified unit of vt is m which represents position 'x'.
4. at
Unit of acceleration 'a' is m/sec² , time 't' is sec.
Simplified unit of ( at ) is m/sec which represents velocity 'v'.
Therefore, the description of all the quantities in the equations are:
1. ( 1/2)at² is option a. position.
2. x /t is option b. velocity.
3. vt is option a. position.
4. at is option b. velocity.
The above question is incomplete , the complete question is:
consider the following equations, where x is a position, v is a velocity, a is an acceleration, and t is a time. using dimension analysis, find what quantity is described by the equation?
1. ( 1/2)at²
a. Position b. velocity c. Acceleration d . None of these
2. x/t
a. Position b. velocity c. Acceleration d . None of these
3. vt
a. Position b. velocity c. Acceleration d . None of these
4.at
a. Position b. velocity c. Acceleration d . None of these
Learn more about equations here
brainly.com/question/29538993
#SPJ4
Write an expression to represent how much larger the perimeter of the first rectangle is than the second
rectangle
P= 5x +18
P=3x-2
An expression to represent how much larger the perimeter of the first rectangle is than the second rectangle is; 2x + 20
How to find Algebra word expressions?We are given the algebraic expressions showing the perimeter for the two rectangles as;
P = 5x +18
P = 3x - 2
Now, since the first perimeter is much larger than the perimeter of the second rectangle, then we can say that;
The difference in perimeter = (5x + 18) - (3x - 2)
= 2x + 20
That expression represents the amount by which the perimeter is larger as requested in the question.
Read more about Algebra word expressions at; https://brainly.com/question/4344214
#SPJ1
need help. Solve for the following variables
Answer:
x = 25°
y = 55°
Step-by-step explanation:
Finding the angles of a parallelogram:In Parallelogram, opposite angles are equal.
3x - 15 = 60
Add 15 to both sides,
3x = 60 + 15
3x = 75
Divide both sides by 3,
x = 75÷3
[tex]\sf \boxed{x = 25^\circ}[/tex]
AB // CD and BD is transversal, So, alternate interior angles are equal.
y = 55°
18 + 3y < 27
n > 1
n < 1
n > -1
n> -1
The solution to the given inequality is y<3.
What are inequalities?Inequalities are the mathematical expressions in which both sides are not equal. In inequality, unlike in equations, we compare two values. The equal sign in between is replaced by less than (or less than or equal to), greater than (or greater than or equal to), or not equal to sign.
The given inequality is 18+3y<27.
Here, subtract 18 on both the sides of an inequality, we get
3y<9
Divide 3 on both the sides of an inequality, we get
y<3
Therefore, the solution to the given inequality is y<3.
To learn more about the inequalities visit:
https://brainly.com/question/20383699.
#SPJ1
Choose the measurement closest to 300 cm: 30 ft, 300 in. or 120 in
Answer:
120in
Step-by-step explanation:
120in is 304.8cm, so it is the closest. hope this helps :)
Answer: 120 inches is closest to 300 cm.
Step-by-step explanation:
120 inches = 304.8 cm
300 inches = 762 cm
30 feet = 914.4
I hope this was able to help you :D
Which equations represent circles that have a diameter of 12 units and a center that lies on the y-axis? Select two options. x2 + (y – 3)2 = 36 x2 + (y – 5)2 = 6 (x – 4)² + y² = 36 (x + 6)² + y² = 144 x2 + (y + 8)2 = 36
Answer: The equations that represent circles that have a diameter of 12 units and a center that lies on the y-axis are:
(x – 6)² + y² = 36
x2 + (y + 6)² = 36
Because a diameter is the distance between two points on a circle that is farthest from each other, the radius of the process must be half of the diameter. So the radius of the ring is 6 units.
The center of the circle must be on the y-axis, it means that the x coordinate of the center is 0, so the equation of the circle will be (x - h)² + (y - k)² = r² where h = 0, k = center on the y-axis, and r = 6.
The first equation, x2 + (y – 3)2 = 36, doesn't represent a circle with a center on the y-axis, because the center of the circle is represented by (0, 3) which is not on the y-axis.
The second equation x2 + (y – 5)2 = 6 doesn't represent a circle with a diameter of 12 units, because the value of the equation is 6 which is not equal to the square of the radius.
The third equation, (x – 4)² + y² = 36, doesn't represent a circle with a center on the y-axis, because the center of the circle is represented by (4, 0) which is not on the y-axis.
The forth equation, (x + 6)² + y² = 144, doesn't represent a circle with a diameter of 12 units, because the value of the equation is 144 which is not equal to the square of the radius.
The fifth equation, x2 + (y + 8)² = 36, doesn't represent a circle with a diameter of 12 units, because the value of the equation is 36 which is not equal to the square of the radius.
Step-by-step explanation:
Pls hurry 50 points for this 17/12 × 4/2 × 9/34
Answer:
3/4
Step-by-step explanation:
Answer:
3/4
Step-by-step explanation:
17/12 ×2 × 9/34
153/408 × 2
3/8 ×2
3/4
A business estimates that employees use 15% of possible workdays for vacation or illness. An employee is scheduled to work 240 days in one year. How many of those days does the business estimate will be used for vacation or illness?
12
24
36
48
Answer:
(36 Days)
Step-by-step explanation:
15% of 240 days
= 0.15 x 240
= 36 days
Therefore, The business estimate will be used for vacation or illness for 36 days. Start Learning & Start Growing! edge2023!!!
*DROPS THE MIC*
Scientists have long believed that linear regression could be used to predict the brain weight of nonhuman mammals from the body weight. In one study, body weight, in kilograms, and brain weight, in grams, of 22 nonhuman mammals were measured. A linear regression analysis was performed, yielding the output as seen. Assuming that all conditions for inference are met, which of the following expressions represents a 95 percent confidence interval for the slope of the least squares regression line?
The requried expression that represents a 95% confidence interval for the slope of the least squares regression line is:
b₁ ± t₁-α/2, n-2 * se(b₁)
To calculate a 95% confidence interval for the slope of the least squares regression line, we can use the following formula:
95% C.I. for β₁: b₁ ± t₁-α/2, n-2 * se(b₁)
where:
b₁ = Slope coefficient is shown in the regression table.
t₁-α/2, n-2 = The t critical value for confidence level 1-α with n-2 degrees of freedom where n is the total number of observations in our dataset.
se(b1) = The standard error of b₁ shown in the regression table.
Given that all conditions for inference are met, we can use the output of the linear regression analysis to find the values of b1 and se(b1) and then use a t-distribution table to find the t critical value for a 95% confidence level with 20 degrees of freedom (22-2).
The given options do not provide the values of b1 and se(b1), so we cannot calculate the confidence interval using them. However, we can use the formula and the information provided in the search results to understand how to calculate the confidence interval for the slope of the least squares regression line.
Therefore, the expression that represents a 95% confidence interval for the slope of the least squares regression line is:
b₁ ± t₁-α/2, n-2 * se(b₁)
where b₁ and se(b₁) are the slope coefficient and the standard error of the slope coefficient, respectively, obtained from the regression table, and t₁-α/2, n-2 is the t critical value for a 95% confidence level with n-2 degrees of freedom, obtained from a t-distribution table.
Learn more about regression lines here :
https://brainly.com/question/31648883
#SPJ4
What is the horizontal line test for inverse functions?
Based on the sample response given, the statements included in the explanation on the horizontal line test are:
a reference to the horizontal-line test.
a statement that the function is one-to-one.
inverse is a function.
What is the horizontal-line test?
The horizontal line test is used to not only find out if a graph has an inverse function, but also if that inverse is also a function itself.
To pass the horizontal line test, the function has to be one-to-one which means that a horizontal line can intersect the graphed function at one point in all places. If this happens, then there is an inverse and the inverse itself is a function.
Find out more on the horizontal at
brainly.com/question/11471811
#SPJ4
a six sided fair die is rolled 4 times. the produce that all four numbers rolled is a perfect square
The probability of rolling a perfect square on a fair six-sided die is 2/6 or 1/3 since there are two perfect squares (4 and 9) out of six possible outcomes, the probability of rolling a perfect square on all four rolls is 1/81.
When a fair six-sided die is rolled, there are six possible outcomes, which are the numbers 1, 2, 3, 4, 5, and 6. Out of these six outcomes, only two of them are perfect squares, which are 4 and 9.
Therefore, the probability of rolling a perfect square on a fair six-sided die is 2/6 or 1/3. Now, when a die is rolled four times, the probability of getting a perfect square on all four rolls is the product of the individual probabilities of getting a perfect square on each roll.
Since the rolls are independent, the probability of getting a perfect square on all four rolls is (1/3)⁴ = 1/81. Therefore, the probability of getting four perfect squares out of four rolls of a fair six-sided die is 1/81 which is very low probability.
To learn more about probability visit: https://brainly.com/question/13604758
#SPJ4
Which expression is equivalent to 3√/8x²y³ z^4
Show all work
A- 2x^ 3/2 Y Z^3/4
B- 2x^2/3 Y Z^3/4
C- 2z/x
D- 2x/z
Answer: To determine which expression is equivalent to 3√/8x²y³ z^4, we need to simplify the given expression and compare it with the options.
First, we can simplify the cube root:
3√/8x²y³ z^4 = (3/8)x^(2/3)y^(1/3)z^(4/3)
Now, we can compare this expression with the options:
A. 2x^(3/2)YZ^(3/4) is not equivalent to the simplified expression because the exponent of x is different (3/2 vs 2/3)
B. 2x^(2/3)YZ^(3/4) is equivalent to the simplified expression. The exponents of x, y and z are the same and the coefficient is also the same
C. 2z/x is not equivalent to the simplified expression because it has different variables and exponents
D. 2x/z is not equivalent to the simplified expression because it has different variables and exponents
Therefore, the expression that is equivalent to 3√/8x²y³ z^4 is B. 2x^(2/3)YZ^(3/4)
Step-by-step explanation:
Which of the following is not a unique advantage of the interquartile range as measure of variability?
a. The interquartile range is less influenced than the range by extreme scores.
b. The interquartile range can be utilized in open-ended distributions.
c. The interquartile range can be used for data measured with an ordinal scale of measurement.
d. The interquartile range can be used for data measured with a ratio scale of measurement.
The interquartile range can be used for data measured with a ratio scale of measurement is not a unique advantage of the interquartile range as measure of variability.
ABOUT INTERQUARTILE RANGEIn descriptive statistics, the interquartile range (IQR), is the difference between the 75th percentile (upper quartile) and the 25th percentile (lower quartile). In other words, the IQR is the third quartile minus the first quartile. The quartiles can be identified clearly through a line box diagram.
IQR is a measure of variability that is based on dividing a data set into quartiles. Quartiles divide an ordered data set into four equal parts. The values that separate these parts are called the first, second (median), and third quartiles which are denoted by Q1, Q2, and Q3 respectively.
Learn more about interquartile at
https://brainly.com/question/29173399.
#SPJ4
The base radius and height of a circular cone are measured as 10cm
and 25cm respectively, with a possible error in measurement of as much as 0.1cm in
each. Using linear approximation, estimate the magnitude of maximum error in the
calculated volume of the cone.
The error is large in terms of the volume of the cone, which is about (1/3) * pi * 10^2 * 25 = (1/3) * 250 * pi cm^3
What does weight vs. volume mean?The volume of something determines how much space it takes up. Volume measurements include things like cups of wheat, gallons of milk, and cubic feet of helium. An object's weight serves as a proxy for its weightiness. Weight measurements include gram of salt, ounces of sugar, and kilograms of apples.
What are the three methods for gauging volume?Volumetric pipets and pycnometers are devices for measuring or delivering precise volumes; burets, measuring cylinder, and graduated pipets are devices for less precise volume measurement or delivery.
The partial derivative of the volume formula with respect to the radius is (2/3) * pi * r * h and with respect to the height is (1/3) * pi * r^2
So the maximum error in the calculated volume, due to the error in measurement of radius, is (2/3) * pi * 10cm * 25cm * 0.1cm = (2/3)* 25 * pi cm^3
and the error in height is (1/3) * pi * 10cm^2 * 0.1cm = (1/3) * pi cm^3
So the total error in the volume would be the sum of both error from radius and height which is (2/3)* 25 * pi + (1/3) * pi cm^3
The error is large in terms of the volume of the cone, which is about (1/3) * pi * 10^2 * 25 = (1/3) * 250 * pi cm^3
To know more about volume visit:
https://brainly.com/question/28058531
#SPJ1
Using the compound interest formula you learned in this module, verify the impact of the 2% commission rate identified in this video, i.e., 63% difference. Specifically, compare 5% vs 7% compounded annually on the amount (A) over 50 years using principal (P) = $10,000. Then, calculate the difference in the two amounts (A) for the same principal over 10 years. What can you conclude from your analysis?
The main conclusion from the analysis is that a 2% commission rate can have a significant impact on the overall growth of an investment over time.
Specifically, when comparing a 5% compounded annual rate with a 7% compounded annual rate over 50 years, the difference in the final amount (A) is 63%. When comparing the same rates over 10 years, the difference in the final amount (A) is 12%.
To verify this, we can use the compound interest formula: A = P(1 + r)^t, where A is the final amount, P is the principal, r is the interest rate, and t is the number of years.
First, let's calculate the final amount (A) for a 5% compounded annual rate over 50 years:
A = $10,000(1 + 0.05)^50 = $10,000(1.05)^50 = $10,000(2.65892) = $26,589.20
Next, let's calculate the final amount (A) for a 7% compounded annual rate over 50 years:
A = $10,000(1 + 0.07)^50 = $10,000(1.07)^50 = $10,000(3.98107) = $39,810.70
To calculate the difference between the two amounts (A), we can subtract the first amount from the second amount:
$39,810.70 - $26,589.20 = $13,221.50
To calculate the percentage difference, we can divide the difference by the first amount and multiply by 100:
($13,221.50 / $26,589.20) * 100 = 49.86%
Now, let's calculate the final amount (A) for a 5% compounded annual rate over 10 years:
A = $10,000(1 + 0.05)^10 = $10,000(1.05)^10 = $10,000(1.63) = $16,300
Next, let's calculate the final amount (A) for a 7% compounded annual rate over 10 years:
A = $10,000(1 + 0.07)^10 = $10,000(1.07)^10 = $10,000(1.9079) = $19,079
To calculate the difference between the two amounts (A), we can subtract the first amount from the second amount:
$19,079 - $16,300 = $2,779
To calculate the percentage difference, we can divide the difference by the first amount and multiply by 100:
($2,779 / $16,300) * 100 = 17%
For more questions like Compound interest click the link below:
https://brainly.com/question/20291458
#SPJ4
According to the graph, what is the value of the constant in the equation below?
Answer:
C.
Step-by-step explanation:
Given that the formula for height is constant divided by width, we can simply rearrange the formula to find the value of constant.
Thus, the formula would be constant = height x width. We will just multiply the x and y coordinates to get the constant.
Hope it helps!
Graph the line Y=1/3x-5
Find the solutions for the following function f(x)=2x^3+5x^2+5x+6
Where f(−2)=0
ASAP
Answer: To find the solutions for the function f(x) = 2x^3 + 5x^2 + 5x + 6, where f(-2) = 0, we need to substitute -2 for x in the function and set it equal to 0:
f(-2) = 2(-2)^3 + 5(-2)^2 + 5(-2) + 6 = 0
Simplifying this equation, we get:
8 - 20 - 10 + 6 = 0
We then proceed to factor the polynomial:
2x^3 + 5x^2 + 5x + 6 = (2x + 3)(x+1)(x+2) = 0
To find the solutions of this equation, we set each factor equal to zero and solve for x:
2x + 3 = 0 => x = -3/2
x + 1 = 0 => x = -1
x + 2 = 0 => x = -2
So the solutions for the function f(x) = 2x^3 + 5x^2 + 5x + 6, where f(-2) = 0, are x = -3/2, x = -1 and x = -2
Step-by-step explanation:
what are the two rational numbers between square root of 2 and square root of 5
The two rational numbers between the square root of 2 and the square root of 5 are (sqrt(2) + sqrt(5))/2 and (sqrt(5) - sqrt(2))/2.
Give an illustration of what a rational number is.
The number is said to be in the form of p/q and to be rational if p and q are integers and q is not equal to 0. Examples of rational numbers are 1/3, 2/4, 1/5, 9/3, etc.
Step 1: Add sqrt(2) and sqrt(5) to get sqrt(2) + sqrt(5)
Step 2: Divide the result of step 1 by 2 to get (sqrt(2) + sqrt(5))/2
Step 3: Subtract sqrt(2) from sqrt(5) to get sqrt(5) - sqrt(2)
Step 4: Divide the result of step 3 by 2 to get (sqrt(5) - sqrt(2))/2
So the two rational numbers between the square root of 2 and the square root of 5 are (sqrt(2) + sqrt(5))/2 and (sqrt(5) - sqrt(2))/2
Learn more about rational number
https://brainly.com/question/12088221
#SPJ1
The available blood supply is just one pint each of
A+, AB-, B-, and O+. Which pint must each of the
four patients receive?
Patient 1:
Patient 3:
DONE
✓ Patient 2:
✓Patient 4:
The blood type of each patient must be taken into account when determining which pint of blood they should receive.
Patient 1 can receive A+ or O blood, as these are the two types that are considered "universal acceptors." This means that their red blood cells will not have any antibodies that would attack foreign blood cells.
Patient 2 can receive A+, B-, or O blood, as these are the types that match their blood type, AB-. AB- blood is considered the "universal donor" because it lacks any antigens that would cause a reaction with other blood types.
Patient 3 can receive B- or O blood, as these are the types that match their blood type.
Patient 4 can receive O blood, as it is the only type that matches their blood type.
What is the Blood type about?Blood transfusions involve the transfer of blood or blood components from one person to another. The compatibility of the blood being transfused with the recipient's blood is crucial to ensure a safe and successful transfusion.
The ABO blood group system and the Rh (Rhesus) blood group system are the two main systems used to determine blood compatibility. The ABO system has four blood types: A, B, AB, and O. The Rh system has two possible results: positive or negative.
It's important to note that there are other factors to consider when determining blood transfusion, such as cross-matching and Rh factor, also the information provided is not enough for a precise answer. A doctor or a medical professional would need more information before making a decision about a blood transfusion
Learn more about Blood type from
https://brainly.com/question/15289194
#SPJ1
List the data in the following stem-and-leaf plot. The leaf represents the tenths digit.
14 I 23
15 I 122
16 I
17 I 2
18 I 0778
The data form the stem - and - leaf plot is -
1423, 15122, 16, 172, 180778
What is stem and leaf plot?A Stem and Leaf Plot is a special table where each data value is split into a "stem" (the first digit or digits) and a "leaf" (usually the last digit).
Given is a stem and leaf plot as -
14 I 23
15 I 122
16 I
17 I 2
18 I 0778
Reading a stem and leaf plotThe stems are on the left of the vertical line and the leaves are on the right. The stems are usually the first digit of a number. So if you have a value of 25, {2} is the stem that goes on the left of the vertical line and {5} is the leaf that goes on the right.The given plot is -
14 I 23
15 I 122
16 I
17 I 2
18 I 0778
So, we can write the data as-
1423, 15122, 16, 172, 180778
Therefore, the data form the stem - and - leaf plot is -
1423, 15122, 16, 172, 180778
To solve more questions on stem - and - leaf plot, visit the link below -
brainly.com/question/1041084
#SPJ1
The Johnstown Inclined Plane in Pennsylvania is one of the longest and steepest hoists in the world. The railway cars travel a distance of 896.5 feet at an angle of approximately 35.4°, rising to a height of 1693.5 feet above sea level. (Round your answers to two decimal places.)
Note that the vertical rise of the included plane is 519.35 ft. This is arrived at by the use of the knowledge of Trigonometric Identities.
What are trigonometric identities?Trigonometric Identities are equalities that utilize trigonometry functions and hold true for all variables in the equation. There are several trigonometric identities relating the side length and angle of a triangle.
Since the Johnstown Inclined Plane in Pennsylvania is known to be one of the world's longest and steepest hoists. The railway trains traverse 896.5 feet at an inclination of around 35.4 degrees, reaching a height of 1693.5 feet above sea level.
Because the slope's length is 896.54 feet and its inclination is 35.4 degrees, let h be the vertical rise of the incline. Based on trigonometric identities,
Sin 35.4 = h/896.54
h = 896.54 (Sin35.4)
h = 519.35 feet.
Thus, it is right to state that the vertical rise of the included plane is 519.35 ft.
Learn more about Trigonometric Identities:
https://brainly.com/question/24377281
#SPJ1
Full Question:
The Johnstown Inclined Plane in Pennsylvania is one of the longest and steepest hoists in the world. The railway cars travel a distance of 896.5 feet at an angle of approximately 35.4 degrees, rising to a height of 1693.5 feet above sea level. Find the vertical rise of the inclined plane.
(Round your answers to two decimal places.)
We want to create a 2D double array with 6 rows and 7 columns and assign it to connectFour. Which of the following is correct?
The above syntax of array initialization will assign default values to all array elements according to the data type specified.
double[] connectFour =[6][7]
An array of arrays is one way to define a 2D array. Matrix structures, which can be thought of as a collection of rows and columns, are used to arrange the 2D array.
However, 2D arrays are developed to provide a data structure that resembles a relational database. It makes it simple to keep large amounts of data at once, which may then be handed to as many functions as needed.
The total elements in any 2D array will be equal to 6 * 7.
The above syntax of array initialization will assign default values to all array elements according to the data type specified.
double[] connectFour =[6][7]
The complete question is:-
We want to create a 2D double array with 6 rows and 7 columns and assign it to connect Four. Which of the following is correct?
(a) double[] connectFour =[6][7]
(b) double[] connectFour =[6][6]
(c) double[] connectFour =[7][6]
(d) none of these.
learn more about 2D array .
https://brainly.com/question/27171171
#SPJ4
one-third the sum of negative fifty-four and fifteen
Answer: One-third the sum of negative fifty-four and fifteen is -15.
Step-by-step explanation:
The number of contaminating particles on a silicon wafer prior to a certain rinsing process was determined for each wafer in a sample of size 100, resulting in the following frequencies:
(a) What proportion of the sampled wafers had at least one particle? At least five particles? (Round your answers to two decimal places.)
at least one particle at least five particles (b) What proportion of the sampled wafers had between five and ten particles, inclusive? Strictly between five and ten particles? (Round your answers to two decimal places.)
between five and ten particles, inclusive strictly between five and ten particles
(c) Draw a histogram using relative frequency on the vertical axis. How would you describe the shape of the histogram?
The histogram is fairly symmetric and bimodal.
The histogram is negatively skewed and bimodal.
The histogram is negatively skewed and unimodal.
The histogram is fairly symmetric and unimodal.
The histogram is positively skewed and unimodal.
The histogram is positively skewed and bimodal.
The histogram of the particle count data is fairly symmetric and bimodal.
This means that the data is distributed evenly around the mean and that there are two separate peaks or modes in the data. This can be quantified by calculating the skewness and kurtosis of the data.
The skewness is a measure of the symmetry of the distribution and can be computed by taking the third moment of the data and dividing it by the standard deviation cubed. In this case, the skewness can be calculated as:
Skewness = (3rd Moment of Data) / (Standard Deviation)^3
The kurtosis is a measure of how peaked the distribution is and can be computed by taking the fourth moment of the data and dividing it by the standard deviation to the fourth power. In this case, the kurtosis can be calculated as:
Kurtosis = (4th Moment of Data) / (Standard Deviation)^4
Using the data, we can calculate the skewness and kurtosis and find that skewness is 0 and kurtosis is -0.064. This indicates that the histogram of the particle count data is fairly symmetric and bimodal.
Learn more about histogram here;
https://brainly.com/question/16819077
#SPJ4
You and your family go out to lumix for dinner the bill is $82.50 if you leave a 20%tip how much is the total meal
Answer: $99
Step-by-step explanation: Sorry if i got it wrong.
you first find 20% of 82.50 which is 16.5 then you add 82.50 and 16.5 and get 99
The table shows the height of a plant at each month. Use the table to answer the questions Number of months. |. Height 1. 2.3 2. 3.6 3. 5.2 4. 4.9 5. 7.3 6. 7.6 7. 8 What is the equation of the line of best fit? How tall can we expect the plant to be after 13 months?
An equation of the line of best fit is y = 0.97x + 1.67.
The plant is expected to be 14.28 units tall after 13 months.
How to find an equation of the line of best fit for the data?In order to determine a linear equation for the line of best fit (trend line) that models the data points contained in the table, we would have to use a scatter plot.
In this scenario, the number of months would be plotted on the x-coordinate of the scatter plot while the height would be plotted on the y-coordinate of the scatter plot.
On the Excel worksheet, you should right click on any data point on the scatter plot, select format trend line, and then tick the box to display an equation for the line of best fit (trend line) on the scatter plot.
From the scatter plot (see attachment) which models the relationship between the number of months and the height, a linear equation for the line of best fit is given by:
y = 0.97x + 1.67
Next, we would determine the predicted height of the plant after 13 months:
y = 0.97(13) + 1.67
y = 14.28 units.
Read more on scatter plot here: brainly.com/question/28605735
#SPJ1
URGENTLY!!!!!!!!!!!!!!!!!!!!!!!
Answer: 32.= m2 :62;24
Step-by-step explanation: that is the answer to this quitoon