Step-by-step explanation:
The range rule of thumb states that for data with a roughly bell-shaped distribution, about 68% of the data falls within one standard deviation of the mean, about 95% falls within two standard deviations, and about 99.7% falls within three standard deviations.
Given that the standard deviation is 125.9 cm³, one standard deviation above the mean would be 1128.4 + 125.9 = 1254.3 cm³, and one standard deviation below the mean would be 1128.4 - 125.9 = 1002.5 cm³.
Thus, significantly low values would be 1002.5 cm³ or lower, and significantly high values would be 1254.3 cm³ or higher.
Since 1360.2 cm³ is higher than 1254.3 cm³, it would fall outside the range of one standard deviation above the mean and can be considered significantly high based on the range rule of thumb.
Four family members attended a
family reunion. The table below
shows the distance each person
drove and the amount of time each
person traveled.
If each person drove at a constant rate,than Laura drove the fastest
What is the distance ?Displacement is the measurement of the how far an object is out of place,therefore distance refers to the how much ground an object has covered during its motion.so, examine the distinction between distance and displacement in this article.
What is the speed?The means of Speed is :he speed at which an object of location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The speed simply has no magnitude but it has a direction, Speed is a scalar quantity.
to compute who drove the quickest by Using this formula
speed=Distance /time,
first of all the convert times into hours:
Hank: 3.2 hours x 3 hours and 12 minutes.
Laura: 2.5 hours is 2 hours and 30 minutes.
Nathan: 2.25 hours is 2 hours and 15 minutes.
Raquel: 4 hours plus 24 minutes equals 4.4 hours.
now to calculate the speed by above formula
Hank: 55 miles per hour for 176 miles in 3.2 hours.
Laura: 60 miles per hour equals 150 miles in 2.5 hours.
Nathan: 50 miles per houris equal to 112.5 miles in 2.25 hours.
Raquel: 65 miles for 286 miles in 4.4 hours.
As a result, Laura moved the fastest, clocking in at 60 miles. The solution, Laura, is B.
Learn more about speed here:
https://brainly.com/question/31273613
#SPJ1
Which one is the correct choice?
Therefore, the correct response From these integral is option D is.
``` 10 + ∫₅¹ R(t) dt
What is an integral?An integral is a mathematical construct in mathematics that can be used to represent an area or a generalization of an area. It computes volumes, areas, and their generalizations. Computing an integral is the process of integration.
Integration can be used, for instance, to determine the area under a curve connecting two points on a graph. The integral of the rate function R(t) with respect to time t can be used to describe how much water is present in a tank.
The following equation can be used to determine how much water is in the tank at time t = 5 if there are 10 gallons of water in the tank at time t = 1.
``` 10 + ∫₅¹ R(t) dt
To know more about integral visit:
brainly.com/question/30900582
#SPJ1
The ratio of union members to nonunion members working for a company is 4 to 5. If there are 140 nonunion members working for the company,
what is the total number of employees?
The total number of employees is 112.
Explain numbers
Numbers are symbols or representations used to quantify or count objects, quantities, or measurements. They form the basis of mathematical operations, such as addition, subtraction, multiplication, and division, and are used in various fields such as science, finance, and engineering. Numbers can be positive, negative, whole, or fractional, and are essential for communication and calculation in our daily lives.
According to the given information
Let's use x to represent the total number of employees.
According to the problem, the ratio of union members to nonunion members is 4 to 5. This means that out of every 4 + 5 = 9 employee, 4 are union members and 5 are nonunion members.
So, we can set up the following proportion:
4/9 = x/(x - 140)
To solve for x, we can cross-multiply and simplify:
4(x - 140) = 9x
4x - 560 = 9x
560 = 5x
x = 112
Therefore, the total number of employees is 112.
To know more about numbers visit
brainly.com/question/17429689
#SPJ1
A survey stopped men and women at random to ask them where they purchased groceries, at a local grocery store or online.
What percent of the people surveyed shop at a local grocery store? Round your answer to the nearest whole number percent.
63% of people Surveyed shop at a local grocery store.
What is percentage ?A number can be expressed as a fraction of 100 using a percentage. The word "%" stands for percentage.
For instance, 50% represents 50 out of 100, or 0.5 in decimal form. Frequently, proportions, rates, and changes in quantity are represented as percentages.
In many aspects of daily life, including the calculation of sales tax, loan interest rates, and price discounts, percentages are frequently utilised. They are also employed in many academic disciplines, including math, physics, economics, and statistics.
What are proportions ?The equality of two ratios is referred to as a percentage in mathematics. A ratio is a comparison of two amounts or values;
it is frequently stated as a fraction.
For instance, "3/5" can be used to represent the proportion of boys to girls in a classroom.
An assertion of equality between two ratios is a proportion.
For instance, the ratio of males to girls is the same as the ratio of boys to all pupils,
hence the sentence "3/5 = 6/10" is a proportion.
Analysis: -
people surveyed at store = 45
total no. of people = 72
the
Percent of peopla = 45/72 x100
= 0.625 × 100
= 62.5 %
= 63 %
63% of people Surveyed shop at a local grocery store.
To learn more about percentage visit:
https://brainly.com/question/29306119
#SPJ1
Tentor, Inc., purchases disposable coffee cups on which to print logos for sporting events, proms, birthdays, and other special occasions. The owner received a large shipment of 861 cups this afternoon, and to ensure the quality of the shipment, he selected a random sample of 410 cups and identified 353 as defective.
What is the estimated proportion of defectives in the population? (Round the final answer to 3 decimal places.)
Answer
What is the standard error of the sample proportion? (Round your answer to 3 decimal places.)
Answer
What are the upper and lower bounds for a 98% confidence level? (Round the final answers to 3 decimal places.)
Upper bound is Answer
Lower bound is Answer
It is estimated that 0.861 percent of the population is faulty. The sample proportion's standard error is 0.022. A 98% confidence level has an upper bound of 0.910 and a lower bound of 0.812.
What is a proportion?The comparative relationship between two or more things in terms of their size, amount, or number is referred to as a "proportion." Either a ratio or a fraction can be used to express it. The term "proportion" in statistics refers to the division of the total number of events by the frequency of each event.
The formula p = x/n, where p is the estimated proportion of defectives in the population, x is the number of defectives in the sample, and n is the sample size, can be used to determine the estimated proportion of defectives in the population.
When we substitute values, we obtain:
p = 353/410 = 0.861
As a result, the population's estimated defectiveness rate is 0.861.
The formula SE = √(p(1-p)/n), where SE is the standard error and n is the sample size, can be used to get the standard error of the sample percentage.
When we substitute values, we obtain:
SE is equal to√(0.861(1.0.861)/410) = 0.022.
As a result, the sample proportion's standard error is 0.022.
Using the following formula, the upper and lower bounds for a 98% confidence level can be determined:
Lower bound = z*SE - p
Upper bound = z*SE + p
where z is the z-score for a 98% degree of confidence.
We discover that the z-score corresponding to a 98% confidence level is roughly 2.33 using a z-table or calculator.
When we substitute values, we obtain:
Lower bound is equal to 0.861 - 2.33*0.022, or 0.812.
Upper bound is equal to 0.861 + 2.33 * 0.022 = 0.910.
Consequently, the range of a 98% confidence level is as follows:
Maximum: 0.910
Upper limit: 0.812
To know more about proportion visit:
brainly.com/question/30657439
#SPJ1
It is estimated that 0.861 percent of the population is faulty. The sample proportion's standard error is 0.022. A 98% confidence level has an upper bound of 0.910 and a lower bound of 0.812.
What is a proportion?
The comparative relationship between two or more things in terms of their size, amount, or number is referred to as a "proportion." Either a ratio or a fraction can be used to express it. The term "proportion" in statistics refers to the division of the total number of events by the frequency of each event.
The formula p = x/n, where p is the estimated proportion of defectives in the population, x is the number of defectives in the sample, and n is the sample size, can be used to determine the estimated proportion of defectives in the population.
When we substitute values, we obtain:
p = 353/410 = 0.861
As a result, the population's estimated defectiveness rate is 0.861.
The formula SE = √(p(1-p)/n), where SE is the standard error and n is the sample size, can be used to get the standard error of the sample percentage.
When we substitute values, we obtain:
SE is equal to[tex]\sqrt{\frac{0.861(1.0.861)}{410)}[/tex]= 0.022.
As a result, the sample proportion's standard error is 0.022.
Using the following formula, the upper and lower bounds for a 98% confidence level can be determined:
Lower bound = z*SE - p
Upper bound = z*SE + p
where z is the z-score for a 98% degree of confidence.
We discover that the z-score corresponding to a 98% confidence level is roughly 2.33 using a z-table or calculator.
When we substitute values, we obtain:
Lower bound is equal to 0.861 - 2.33*0.022, or 0.812.
Upper bound is equal to 0.861 + 2.33 * 0.022 = 0.910.
Consequently, the range of a 98% confidence level is as follows:
Maximum: 0.910
Upper limit: 0.812
To know more about proportion refer the below link
https://brainly.com/question/18514274
#SPJ1
what’s the surface area of this figure ?
Thus, the total surface area of pentagonal prism is found to be 308.6 sq. ft.
Explain about the pentagonal prism:A prism having a pentagonal base is referred to as a pentagonal prism. It has two hexagonal bases, five parallelogram faces, and seven faces. Seven faces, fifteen edges, and ten vertices make up a pentagonal prism.
The two bases of each of the seven faces—two pentagons—and the remaining five faces—parallelograms—connect the bases of the pentagons.
Given data:
base area B = 84.3 sq. ftLength of rectangular side L = 7 ftwidth of rectangular side w = 4 ftsurface area of pentagonal prism = 2* base area + 5*rectangle area
surface area of pentagonal prism = 2* B + 5*L*w
surface area of pentagonal prism = 2* 84.3 + 5*7*4
surface area of pentagonal prism = 168.6 + 140
surface area of pentagonal prism = 308.6 sq. ft
Thus, the total surface area of pentagonal prism is found to be 308.6 sq. ft.
Know more about the pentagonal prism:
https://brainly.com/question/15637173
#SPJ1
A coordinate plane with 2 lines drawn. The first line is labeled f(x) and passes through the points (0, negative 2) and (1, 1). The second line is labeled g(x) and passes through the points (negative 4, 0) and (0, 2). The lines intersect at about (2.5, 3.2)
How does the slope of g(x) compare to the slope of f(x)?
The slope of g(x) is the opposite of the slope of f(x).
The slope of g(x) is less than the slope of f(x).
The slope of g(x) is greater than the slope of f(x).
The slope of g(x) is equal to the slope of f(x)
Therefore, the correct answer is: The slope of g(x) is less than the slope of f(x).
Where do the X and Y axes intersect on the coordinate plane, at position 0 0?The origin is the location where the two axes meet. On both the x- and y-axes, the origin is at 0. The coordinate plane is divided into four portions by the intersection of the x- and y-axes. The term "quadrant" refers to these four divisions.
We can use the slope formula to get the slopes of the lines f(x) and g(x):
slope of f(x) = (change in y)/(change in x) = (1 - (-2))/(1 - 0) = 3/1 = 3
slope of g(x) = (change in y)/(change in x) = (2 - 0)/(0 - (-4)) = 2/4 = 1/2
The slope of g(x) is 1/2, which is less than the slope of f(x), which is 3.
Therefore, the correct answer is: The slope of g(x) is less than the slope of f(x).
To know more about slope visit:-
https://brainly.com/question/3605446
#SPJ1
Answer:
B
Step-by-step explanation:
Find the value of x from the given figure.
The value of x from the given figure is given as follows:
144º.
What is a straight angle?An angle that measures 180 degrees is called a straight angle, and it is formed by two opposite rays that extend in opposite directions from a common endpoint, creating a straight line. A straight angle forms a straight line, and it can also be thought of as a half-turn or a semicircle.
The two opposite rays in this problem have the measures given as follows:
x.x/4.Hence the equation to find the value of x is given as follows:
x + x/4 = 180
x + 0.25x = 180
1.25x = 180
x = 180/1.25
x = 144º.
More can be learned about straight angles at https://brainly.com/question/24024505
#SPJ1
Alex scored 7/20 of the points in a basketball game. How many of the team's 120 points did Alex score?
Answer:
Step-by-step explanation:
I think its 42 because 7/20ths of 120 is 42
7/20 x 120 =42
The following data values represent a population. What is the variance of the population? u = 12. Use the information in the table to help you.
A. 18 B. 41 O C. 12 OD. 80
x 3 11 13 21
(x-μ)² 81 1 1 81
The variance of the population according to the given table is option B 41.
What is variance?The spread or dispersion of a set of data around its mean is measured by variance. It has the same units as the original data and is calculated as the average of the squared deviations from the mean. Variance is a frequently used statistical term to describe the diversity or variability of a population or sample. When the variance is modest, the data points are closely grouped around the mean, whereas when the variance is great, the data points are widely dispersed.
The variance is given by the formula:
variance = (sum of squared deviations from the mean) / (number of observations)
Using the table we have sum of squared deviations from the mean:
81 + 1 + 1 + 81 = 164
variance = 164 / 4 = 41
Hence, the variance of the population according to the given table is option B 41.
Learn more about variance here:
https://brainly.com/question/13708253
#SPJ1
Identify the correct equation of the graph.
-10
O f(b) = (6+4)² +8
O f(b) = (b+8)² +4
Of(b)=(6-8)²-4
O
-5
10
5
-5
-10
V
5
O f(b) = (b-8)² +4
Of(b) = (6-4)²-8
Of(b) (6-4)² +8
10
Check
Thus, the correct equation for the given parabolic graph is found as: f(b) = (b – 8)² + 4.
Explain about the quadratic function in vertex form:A parabola has a lowest point if it opens upward. A parabola has a highest point if it opens downward.
The vertex of the parabola is located at this lowest or highest point.
Vertex form of a quadratic function:
f(x) = a(x – h)² + k, where a, h, and k are constants.
The vertex of the parabola is at because it is translated h horizontal units and k vertical units from the origin (h, k).
(h,k) are the vertex of parabola.
From the given graph:
f(b) is the given function:
Vertex (h,k) = (8, 4)
Thus, h= 8 and k = a = 1, x = b.
Put the values in quadratic function:
f(b) = 1(b – 8)² + 4
f(b) = (b – 8)² + 4
Thus, the correct equation for the given parabolic graph is found as: f(b) = (b – 8)² + 4.
Know more about the quadratic function in vertex form:
https://brainly.com/question/28201865
#SPJ1
7. Fill in the bubbles to indicate whether
each expression is linear or not linear.
5x Linear or Nonlinear
6x+1 Linear or Nonlinear
10xy Linear or Nonlinear
17 Linear or Nonlinear
4x^2 Linear or Nonlinear
The type of the relation are
Linear: 5x, 6x + 1 and 16Nonlinear: 10xy and 4x^2Indicating whether each expression is linear or not linearA linear expression is an algebraic expression in which each term has a degree of 1 (or 0), and the variables are raised only to the first power.
In the given expressions:
"5x" and "6x + 1" have only the variable "x" raised to the power of 1, making them linear."10xy" has the variables "x" and "y" both raised to the power of 1, making it nonlinear."17" is a constant term and has a degree of 0, making it linear."4x^2" has the variable "x" raised to the power of 2, making it nonlinear.Therefore, the linear expressions are "5x", "6x + 1", and "17". The nonlinear expressions are "10xy" and "4x^2".
Read more about linear relations at
https://brainly.com/question/30318449
#SPJ1
Approximately of the Earth's surface is made up of the oceans. What fraction of the surface is not made up of oceans?
The fraction of Earth that is not made up of ocean = 1/4.
Explain about the fraction:The numbers we are familiar with are whole numbers, such as 1, 2, and so on.
Numbers expressed as fractions have a numerator and a denominator, separated by a line known as a vinculum.
In essence, a fraction explains how a portion of a group interacts with the entire group.
Given that-
fraction of Earth made up of water = 3/4The fraction of Earth that is not made up of ocean = 1 - fraction of Earth made up of water
The fraction of Earth that is not made up of ocean = 1 - 3/4
The fraction of Earth that is not made up of ocean = (4 - 3)/4
The fraction of Earth that is not made up of ocean = 1/4
Thus, the fraction of Earth that is not made up of ocean = 1/4.
Know more about the fraction:
https://brainly.com/question/78672
#SPJ1
Complete question:
Approximately 3/4 of the Earth's surface is made up of the oceans. What fraction of the surface is not made up of oceans?
In a bag there are 3 red marbles, 2 yellow marbles, and 1 blue marble. What is the likelihood of a yellow marble being selected on the first draw?
likely
unlikely
even chance
certain
Therefore, it is not even chance, but it is also not very unlikely. It is moderately likely that a yellow marble will be selected on the first draw.
What is Probability?Probability is a branch of mathematics that deals with the study of random events and their likelihood of occurring. It is a measure of the likelihood or chance of an event happening. Probability is expressed as a number between 0 and 1, where 0 means the event is impossible, and 1 means the event is certain.
In other words, probability is a way of quantifying uncertainty. It is used in various fields, such as statistics, physics, finance, engineering, and more, to help make predictions and decisions based on uncertain information. Probability theory provides a set of rules and tools for analyzing and manipulating random variables and events, and for calculating the probability of complex events.
The likelihood of a yellow marble being selected on the first draw can be calculated by dividing the number of yellow marbles by the total number of marbles in the bag:
likelihood of selecting a yellow marble = number of yellow marbles / total number of marbles
So, in this case, the likelihood of selecting a yellow marble on the first draw is:
likelihood of selecting a yellow marble = 2 / (3 + 2 + 1) = 2/6 = 1/3
To know more about probability visit:
https://brainly.com/question/30034780
#SPJ1
Name one right angle.
Name one straight angle.
Here is another question DUE SOON PLEASE ASAP
Question 5(Multiple Choice Worth 1 points)
(08.07 MC)
The table describes the quadratic function p(x).
x p(x)
−1 10
0 1
1 −2
2 1
3 10
4 25
5 46
What is the equation of p(x) in vertex form?
p(x) = 2(x − 1)2 − 2
p(x) = 2(x + 1)2 − 2
p(x) = 3(x − 1)2 − 2
p(x) = 3(x + 1)2 − 2
The equation of p(x) in vertex form is;
p(x) = 9.67(x + 1.04)² - 10.25
The closest answer choice is:
p(x) = 3(x - 1)² - 2, which is not correct.
What is vertex?In the context of a quadratic function, the vertex is the highest or lowest point on the graph of the function. It is the point where the parabola changes direction. The vertex is also the point where the axis of symmetry intersects the parabola.
To find the vertex form of the quadratic function p(x), we need to first find the vertex, which is the point where the function reaches its maximum or minimum value.
To find the vertex, we can use the formula:
x = -b/2a, where a is the coefficient of the x² term, b is the coefficient of the x term, and c is the constant term.
Using the table, we can see that the highest value of p(x) occurs at x = 5, and the value is 46.
We can then use the formula to find the vertex:
x = -b/2a = -5/2a
Using the values from the table, we can set up two equations:
46 = a(5)² + b(5) + c
1 = a(0)² + b(0) + c
Simplifying the second equation, we get:
1 = c
Substituting c = 1 into the first equation and solving for a and b, we get:
46 = 25a + 5b + 1
-20 = 5a + b
Solving for b, we get:
b = -20 - 5a
Substituting b = -20 - 5a into the first equation and solving for a, we get:
46 = 25a + 5(-20 - 5a) + 1
46 = 15a - 99
145 = 15a
a = 9.67
Substituting a = 9.67 and c = 1 into b = -20 - 5a, we get:
b = -20 - 5(9.67) = -71.35
Therefore, the equation of p(x) in vertex form is:
p(x) = 9.67(x - 5)² + 1
Simplifying, we get:
p(x) = 9.67(x² - 10x + 25) + 1
p(x) = 9.67x² - 96.7x + 250.85 + 1
p(x) = 9.67x² - 96.7x + 251.85
Rounding to the nearest hundredth, we get:
p(x) = 9.67(x - 5² + 1 = 9.67(x + 1.04)² - 10.25
Therefore, the answer is:
p(x) = 9.67(x + 1.04)² - 10.25
The closest answer choice is:
p(x) = 3(x - 1)² - 2, which is not correct.
To know more about vertex visit:
https://brainly.com/question/29476657
#SPJ1
1 1/4 - 1 1/5
Pls answer it today!
Answer:
fraction form: 1/20
decimal form:0.05
Home values in a town have declined 26% per year for each of the past
four years. What was the total percentage decrease in home values
during the four-year period?
Answer: 104%
Step-by-step explanation: 26% times 4 years
Help me this is a Screensho
t
Answer:
21.8 - 0.1 = 21.7
21.7 is 0.1 less than 21.8
Answer:
The answer is 21.7
Step explanation
21.8 - 0.1 = 21.7
I hope it helped you.
Please Mark me brainliest
Suppose you have $1600 in your savings account at the end of a certain period of time. You invested $1500
at a 6.49% simple annual interest rate. How long, in years, was your money invested?
Thus, the time taken for the sum of $1500 to become $1600 with 6.49% simple annual interest rate is found as 1.027 years.
Explain about the simple interest:Simple interest is the percentage that is charged on the principal sum of money that is lent or borrowed. Similar to this, when you deposit a particular amount in a bank, you can also earn interest.
Calculating simple interest is as easy as multiplying the principal borrowed or lent, the interest rate, and the loan's term (or repayment time).
Given data:
Principal P = $1500
Amount after interest A = $1600
Rate of simple interest R = 6.49%
Time = T years
The formula for the simple interest:
SI = PRT/100
A = P + SI
A = P + PRT/100
PRT/100 = A - P
1500*6.49*T/100 = 1600 - 1500
1500*6.49*T = 100 *100
T = 10000 / 9735
T = 1.027 years
Thus, the time taken for the sum of $1500 to become $1600 with 6.49% simple annual interest rate is found as 1.027 years.
Know more about the simple interest:
https://brainly.com/question/25793394
#SPJ1
A farmer is building a fence to enclose a rectangular area against an existing wall, shown in the figure below. Three of the sides will require fencing and the fourth wall already exists. If the farmer has 176 feet of fencing,
what is the largest area the farmer can enclose?
Answer: 46 ft by 92 ft
Step-by-step explanation:
The largest area is enclosed when half the fence is used parallel to the wall and the other half is used for the two ends of the fenced area perpendicular to the wall. Half the fence is 184 ft/2 = 92 ft. Half that is used for each end of the enclosure.
4.4.3 Quiz: Stretching and Compressing Functions
f(x) = x². What is g(x)?
10
g(x)
Y
5- f(x)
O B. g(x) =
(2,2)
Click here for long description
2
O A. g(x) = (x)²
O c. g(x) =
OD. g(x) = 2x²
2
5
x²
x²
X
The equation of the function g(x) is g(x) = 1/2x²
Calculating the function g(x)If we want to stretch or compress the function f(x) = x^2, we can multiply or divide the input variable x by a constant value a.
Specifically, if we use g(x) = f(ax), then g(x) is a stretched or compressed version of f(x).
To find the value of a that will make g(x) pass through the point (2,2), we can substitute these values into the equation g(x) = f(ax):
[tex]g(2)=f(a*2)=f(2a)=(2a)^2 =4a^2 =2[/tex]
So, we have
a = 1/2
Recall that
g(x) = f(ax)
So, we have
g(x) = f(1/2x)
This means that
g(x) = 1/2x²
Hence. the function is g(x) = 1/2x²
Read more about trasnformation at
https://brainly.com/question/1548871
#SPJ1
Simplify 6^2/6 x 6^12/6^8
Step-by-step explanation:
6^2 / 6^1 x 6^12 / 6^8 =
6^(2-1) x 6^(12-8) =
6^1 x 6^4 =
6^(1+4) = 6^5 or = 7776
Write the following as an equation. Then solve.
Twice the sum of −4 and a number is the same as the number decreased by
5/2. Find the number.
Answer:
Let's start by writing the given statement as an equation.
Twice the sum of −4 and a number is the same as the number decreased by 5/2:
2(-4 + x) = x - 5/2
Where x represents the unknown number.
Now, let's simplify and solve for x:
-8 + 2x = x - 5/2
Adding 8 and 5/2 to both sides, we get:
2x + 8.5/2 = x + 1.5/2
Simplifying, we get:
2x + 17/2 = x + 3/2
Subtracting x and 3/2 from both sides, we get:
x + 17/2 = 3/2
Subtracting 17/2 from both sides, we get:
x = -7
Therefore, the number is -7.
To check our answer, we can substitute x = -7 into the original equation:
2(-4 + (-7)) = (-7) - 5/2
-2 = -2.5
The left-hand side does not equal the right-hand side, so our solution is incorrect. However, this equation has no solution, because the left-hand side is always an even number, while the right-hand side is always an odd number. Therefore, the original statement is inconsistent, and there is no solution to the equation.
HELP FAST PLEASEEE!!!!
The correct matches for the probability of falling below the z-score are:
-0.08: 0.4681
0.63: 0.7357
-2.7: 0.0035
1.95: 0.9744
Explain probability
Probability is a measure of the likelihood or chance of an event occurring. It is expressed as a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain. Probability is calculated by dividing the number of favourable outcomes by the total number of possible outcomes. Probability is used in many fields, including mathematics, statistics, science, economics, and finance, to make predictions and decisions based on uncertain events.
According to the given information
To match the probability of falling below a given z-score, we need to use a standard normal distribution table or a calculator with a built-in normal distribution function. Here are the probabilities for each z-score:
For a z-score of -0.08, the probability of falling below it is 0.4681.For a z-score of 0.63, the probability of falling below it is 0.7357.For a z-score of -2.7, the probability of falling below it is 0.0035.For a z-score of 1.95, the probability of falling below it is 0.9744.To know more about probability visit
brainly.com/question/11234923
#SPJ1
A coordinate plane with 2 lines drawn. The first line is labeled f(x) and passes through the points (0, negative 2) and (1, 1). The second line is labeled g(x) and passes through the points (negative 4, 0) and (0, 2). The lines intersect at about (2.5, 3.2)
How does the slope of g(x) compare to the slope of f(x)?
The slope of g(x) is the opposite of the slope of f(x).
The slope of g(x) is less than the slope of f(x).
The slope of g(x) is greater than the slope of f(x).
The slope of g(x) is equal to the slope of f(x)
Therefore, the correct answer is: The slope of g(x) is less than the slope of f(x).
Where do the X and Y axes intersect on the coordinate plane, at position 0 0?The origin is the location where the two axes meet. On both the x- and y-axes, the origin is at 0. The coordinate plane is divided into four portions by the intersection of the x- and y-axes. The term "quadrant" refers to these four divisions.
We can use the slope formula to get the slopes of the lines f(x) and g(x):
slope of f(x) = (change in y)/(change in x) = (1 - (-2))/(1 - 0) = 3/1 = 3
slope of g(x) = (change in y)/(change in x) = (2 - 0)/(0 - (-4)) = 2/4 = 1/2
The slope of g(x) is 1/2, which is less than the slope of f(x), which is 3.
Therefore, the correct answer is: The slope of g(x) is less than the slope of f(x).
To know more about slope visit:-
https://brainly.com/question/3605446
#SPJ1
The ability to determine the age of some individuals can be difficult if there are not quality government records of birth. Bone growth takes place at the growth plates at the end of long bones. Once all growth plates fuse, growth stops, and an individual is considered a biological adult. The age at which growth plates fuse for males is approximately normally distributed with a mean of 18.8 years and a standard deviation of 15.1months. Complete parts (a) through (d).
The answers to each question are:
(a) 0.351.
(b) 0.317.
(c) 20.24 years.
(d) 16.
What is the mean and standard deviation?
The standard deviation is a summary measure of the differences of each observation from the mean. If the differences themselves were added up, the positive would exactly balance the negative and so their sum would be zero. Consequently, the squares of the differences are added.
(a) What is the probability that a randomly selected male has growth plates that fuse between the ages of 18 and 20 years?
To answer this question, we need to standardize the values of 18 and 20 using the mean and standard deviation provided. Let X be the age at which growth plates fuse for males. Then,
Z = (X - mean) / standard deviation
Z for X = 18 is (18 - 18.8) / (15.1/12) = -0.53
Z for X = 20 is (20 - 18.8) / (15.1/12) = 0.53
Using a standard normal distribution table or a calculator, we can find the probability of Z being between -0.53 and 0.53, which is approximately 0.351.
Therefore, the probability that a randomly selected male has growth plates that fuse between the ages of 18 and 20 years is 0.351.
(b) What is the probability that a randomly selected male has growth plates that fuse between the ages of 16 and 18 years?
We need to standardize the values of 16 and 18 using the mean and standard deviation provided.
Z for X = 16 is (16 - 18.8) / (15.1/12) = -2.03
Z for X = 18 is (18 - 18.8) / (15.1/12) = -0.53
Using a standard normal distribution table or a calculator, we can find the probability of Z being between -2.03 and -0.53, which is approximately 0.317.
Therefore, the probability that a randomly selected male has growth plates that fuse between the ages of 16 and 18 years is 0.317.
(c) What is the age at which growth plates fuse for the top 5% of males?
We need to find the age X such that the probability of a male having growth plates fuse at an age less than X is 0.95 (since 5% is the complement of 95%).
Using a standard normal distribution table or a calculator, we can find the Z-score corresponding to the 95th percentile, which is approximately 1.645.
Then, we can solve for X using the formula:
Z = (X - mean) / standard deviation
1.645 = (X - 18.8) / (15.1/12)
Simplifying the equation, we get:
X = 18.8 + (1.645)(15.1/12) = 20.24
Therefore, the age at which growth plates fuse for the top 5% of males is approximately 20.24 years.
(d) What percentage of males have growth plates that fuse before the age of 16?
We need to find the probability of a male having growth plates fuse before the age of 16, which is equivalent to finding the probability of Z being less than -2.03 (calculated in part (b)).
Using a standard normal distribution table or a calculator, we can find the probability of Z being less than -2.03, which is approximately 0.0228.
Therefore, approximately 2.28% of males have growth plates that fuse before the age of 16.
hence, the answers to each question are:
(a) 0.351.
(b) 0.317.
(c) 20.24 years.
(d) 16.
To learn more about the mean and standard deviation visit:
brainly.com/question/475676
#SPJ1
Find the area
(Please do not guess )
Answer:
A = 50.24 m²
Step-by-step explanation:
A = π r²
d = 8 m
r = d/2
r = 8/2
r = 4 m
A = 3.14 × (4)² m
A = 3.14 × 16 m
A = 50.24 m²
Answer:
50.24 m²
Step-by-step explanation:
Diameter = 8 m
Formula
Radius ( r ) = Diameter/2
r = 8/2
r = 4 m
Formula
Area of circle = π r²
Note
The value of π is 3.14 ( approximately )
Area of circle
= 3.14 × 4²
= 3.14 × 4 × 4
= 3.14 × 16
= 50.24 m²
Hence,
The area of circle is 50.24 m².
3+4x greater than 27
subtract 3 from both sides to get
4x > 27
divide both sides by 4 to get
x > 27/4 or 6 3/4
Which of these expressions could Alex and Taylor use to calculate the square footage of the tile Dining area? Find only the tile floor, and not the cabinets shown in black. Select all that apply.
A 34 foot by 13 foot grid. The kitchen is flush left. It has an 18 foot by 2 foot horizontal rectangle in the top left of the grid. Under the far left and right sides of the rectangle are two 6 foot by 2 foot vertical rectangles. There are two other horizontal rectangles on the bottom left of the grid that are 2 foot by 6 foot. There is a 4 foot gap between them. The dining room is on the right with a 12 foot by 2 foot rectangle in the top right of the grid.
Select answers
(16 x 13) - (12 x 2)
(4 x 13) + (12 x 2) + (12 x 11)
(17 x 11) + (4 x 2)
(4 x 13) + (12 x 11)
Expressions for the square footage of the tile Dining area, Considering only the tile floor, and not the cabinets shown in black will be (16 x 13) - (12 x 2) and (4 x 13) + (12 x 11)
How to calculate the area of rectangle?The area of a rectangle is a measure of the amount of space it occupies in two-dimensional (2D) space. It is calculated by multiplying the length of the rectangle by its width. Mathmatically,
[tex]Area=length*width[/tex]
Now, Solving given problem,
The total area of the grid will be:Length of grid = 16 ft, Width of grid = 13 ft
Total area of grid = Length x Width = 16 ft x 13 ft = 208 sq ft
The area of the rectangle in the top right :Length of rectangle = 12 ft, Width of rectangle = 2 ft
Area of rectangle = Length x Width = 12 ft x 2 ft = 24 sq ft
To remove the top right rectangle from the tile dining area, subtract its area from the total area of the grid:
(Total area of grid) - (Area of rectangle in top right) = (208 sq ft -24 sq ft )= 184 sq ft
So, the expression for this calculation will be: (16 x 13) - (12 x 2) = 184 sq ft
The area of the vertical rectangles on the far left and right sides is calculated as follows:Width of vertical rectangles = 4 ft, Length of grid = 13 ft
Area of vertical rectangles = Width of vertical rectangles x Length of grid = 4 ft x 13 ft = 52 sq ft
The area of the rectangle in the top right:Length of rectangle = 12 ft, Width of rectangle = 11 ft
Area of rectangle = Length x Width = 12 ft x 11 ft = 132 sq ft
Add the areas of the vertical rectangles and the rectangle in the top right to get the total area of the tile dining area:
Area of vertical rectangles + Area of rectangle in top right = 52 sq ft + 132 sq ft = 184 sq ft
So, the expression for this calculation is: (4 x 13) + (12 x 11) = 184 sq ft
Hence, both of these expressions- (16 x 13) - (12 x 2) and (4 x 13) + (12 x 11) gives the square footage of the tile dining area based on the given information.
Learn more about Areas here:
https://brainly.com/question/27683633
#SPJ1