Methane is burned with oxygen to yield carbon dioxide and water. The feed
contains 20 mole % CH4, 60% 02 and 20% C02 and the conversion rate of the
limiting reactant is 90%.
CHA+2 02--->C02+2H20
Find the following;
1 The limiting reactant.
2- The molar composition of the product stream.

Q = 2.0 x 10³ J

Using the change in temperature, we can find the heat transfer.

Heat Transfer

An increase in temperature is caused by absorbing energy. This means that the aluminum must have absorbed energy in order to rise in temperature. Since energy is being absorbed, the Q-value should be positive.

The equation for heat transfer is:

In this equation, Q is energy, m is mass, c is the specific heat, and ΔT is the change in temperature. Specific heat is a constant that every substance has that describes how much energy is needed to heat up the substance. These values can be found in a data table.

Solving for Q

To find Q, we can plug in the known values and solve. The question states that there are 150.0g of Al. The specific heat of Al is 0.897 J/g*C. Also, since 40-25 = 15, the change in temperature is +15°C.

Since this question is based on measured values, we need to round according to significant figures. Our answer should have 2 sig figs. This means the answer rounds down to 2000J; however, this only has 1 sig fig. So, we need to use scientific notation to write our answer.

Given that Q is positive, the aluminum gains 2.0 x 10³ J of energy.

Answer:

Its a physical change so its reversible

Explanation:

hope it helps

To determine the temperature of the air inside the tire when the pressure increases to 87.3 kPa, we can use the ideal gas law equation:

PV = nRT

Where:

P = pressure

V = volume

n = number of moles

R = gas constant

T = temperature

Assuming the volume of the tire remains constant, we can rearrange the equation as follows:

P₁/T₁ = P₂/T₂

Where:

P₁ = initial pressure (82.0 kPa)

T₁ = initial temperature (26.0 °C + 273.15 K) [converting Celsius to Kelvin]

P₂ = final pressure (87.3 kPa)

T₂ = final temperature (unknown)

Substituting the values into the equation:

82.0 kPa / (26.0 °C + 273.15 K) = 87.3 kPa / T₂

Now, let's solve for T₂:

T₂ = (87.3 kPa * (26.0 °C + 273.15 K)) / 82.0 kPa

Calculating the expression:

T₂ ≈ 299.19 K

To convert this temperature back to Celsius:

T₂ ≈ 299.19 K - 273.15 ≈ 26.04 °C

Therefore, the temperature of the air inside the tire, when the pressure increases to 87.3 kPa, is approximately 26.04 °C.

To know more about pressure:

https://brainly.com/question/30673967

#SPJ1

Density differences caused by temperature and salinity variations are fundamental drivers of ocean currents of seawater . Warm currents transport heat from the equator to higher latitudes, while cold currents transport cold water from higher latitudes to lower latitudes.

When seawater is heated, it expands and becomes less dense, causing it to rise. Conversely, when seawater cools, it contracts and becomes denser, causing it to sink. These density differences due to temperature variations create vertical movements in the ocean known as thermohaline circulation or convection currents. On the other hand, regions with high freshwater input from rivers or heavy precipitation have lower salinity, resulting in lower density. This lighter water tends to float on the denser seawater beneath it, leading to the formation of surface currents that transport water from areas of low salinity to areas of higher salinity. These ocean currents play a vital role in shaping global climate patterns and maintaining the balance of heat and nutrients in the ocean ecosystem.

Learn more about the ocean current here.

https://brainly.com/question/21654036

#SPJ1

II (C6H6O2) and III (C6H14N2O6) are not empirical formulas.

The empirical formula of a chemical compound are known to be the simplest whole number ratio of atoms present in a compound.

The empirical formula for C6H6O2 is CH3O and the emperical formula for C6H14N2O6 isC3H7NO3.

NO2 is the empirical formula for nitrogen dioxide. And PCl3 is the empirical formula for phosphorus trichloride.

Find more exercises on empirical formulas;

https://brainly.com/question/14425592

#SPJ1

Answer:

Benzyl benzoate is a type of aromatic ester compound. It can also be classified as a benzyl compound, a benzoate ester, and a fragrant substance. In addition, it is commonly used as a solvent, a fixative, and a fragrance in various industries such as cosmetics, pharmaceuticals, and food.

Explanation:

It is true that Light always travels in a straight line until something gets in its way.

Waves do carry energy. The energy carried by a wave is directly related to both its frequency and amplitude. Higher frequency waves have more energy, and larger amplitude waves also carry more energy.

The frequency of a wave is related to its energy, but the amplitude of a wave is not directly proportional to its energy. The energy of a wave is determined solely by its frequency, not its amplitude.

The amplitude of a wave corresponds to its maximum displacement from the equilibrium position, while the energy of a wave is determined by the number of wave oscillations or cycles per unit time, which is represented by the frequency.

Thus, the answers are true, true and false respectively.

For more details regarding wave, visit:

https://brainly.com/question/25954805

#SPJ1

Answer:

It has a constant average kinetic energy.

Explanation:

According to the kinetic molecular theory, the particles of a gas are in constant random motion and possess kinetic energy. This kinetic energy is directly proportional to the temperature of the gas.

If the sample of gas is at a constant temperature and volume, it means that the average kinetic energy of its particles is constant.

C, it has a constant average kinetic energy is the correct statement.

Explanation: The kinetic molecular theory of gases states that a gas contains an enormous number of atoms/molecules.

The kinetic-molecular theory of gases can be stated as such: A gas consists of molecules in constant random motion. Gas molecules influence each other only by collision; they exert no other forces on each other. All collisions between gas molecules are perfectly elastic; all kinetic energy is conserved.

Happy to help, have a great day! :)

The approximate number of molecules in the given set of values is 2.823 × 10²² molecules of CO₂.To calculate the number of molecules (n) of CO₂, we can use the ideal gas law equation:PV = nRT

Where:

P = Pressure (in kPa)

V = Volume (in liters)

n = Number of moles

R = Ideal gas constant (8.314 J/(mol·K))

T = Temperature (in Kelvin),First, let's convert the pressure from kPa to atm (atmospheres) since the ideal gas constant is usually expressed in atm:

1 atm = 101.325 kPa

So, 200 kPa is approximately 1.973 atm.

Now, rearranging the ideal gas law equation to solve for n:

n = (PV) / (RT)

n = (1.973 atm * 0.602 L) / (0.0821 L·atm/(mol·K) * 311 K)

n ≈ 0.0469 mol

Since 1 mole of any substance contains Avogadro's number (6.022 × 10²³) of molecules, the number of molecules (N) can be calculated by multiplying the number of moles by Avogadro's number:

N = n * Avogadro's number

N = 0.0469 mol * (6.022 × 10²³ molecules/mol)

=N ≈ 2.823 × 10²² molecules

Therefore, the approximate number of molecules in the given set of values is 2.823 × 10²² molecules of CO₂.

For more such questions on molecules

https://brainly.com/question/30337264

#SPJ11

Answer:

149.63 grams of CO2 are produced when 3.4 moles of CH4 are burned.

9.7atm

Ideal gas laws let us find different characteristics of gas through its changes.

Boyle's Law

Boyle's law describes the relationship between pressure and volume. This law states that volume and pressure are inversely proportional. This means that as volume increases, pressure decreases. In equation form, Boyle's law is:

In the question, the new volume is greater than the original. This means that the new pressure must be less than the original pressure.

Solving for P₁

In order to find the original pressure, we can plug in the information we know.

Now, divide both sides by 4.0L.

This pressure is greater than 4.3atm, which follows the prediction we made earlier. So, this is a reasonable answer. Since this question involves measured values, we should round according to significant figure rules. This means that the original pressure is 9.7atm.

Answer:

0.001 mol/dm^3.

Explanation:

The pH of a solution is defined as the negative base-10 logarithm of the concentration of hydrogen ions (H+) in moles per liter (M).

The pH of 3 moldm^-3 means the concentration of hydrogen ions in the solution is:

[H+] = 10^(-pH) mol/L

[H+] = 10^(-3) mol/dm^3

[H+] = 0.001 mol/dm^3

Therefore, the concentration of H+ in pH 3 moldm^-3 is 0.001 mol/dm^3.

The hydrogen ion concentration in the acid rain is 10 times higher than the HI concentration in the rain which is naturally acidic. Option D.

The pH scale is logarithmic, which means that a change of one pH unit represents a ten-fold change in hydrogen ion concentration.

Rainwater that is naturally acidic and has a pH of 5.6 has a hydrogen ion concentration of [tex]10^{5.6[/tex] moles per liter.

Acid rain with a pH of 4.6 has a hydrogen ion concentration of [tex]10^{4.6[/tex] moles per liter.

Therefore, the ratio of H+ concentration in acid rain to that in naturally acidic rain can be calculated as:

[H+] in acid rain / [H+] in naturally acidic rain = 10^(-4.6) / 10^(-5.6) = 10^(1) = 10

This means that the concentration of hydrogen ion in acid rain with a pH of 4.6 is 10 times higher than the concentration of H+ in rain that is naturally acidic and has a pH of 5.6.

In other words, the hydrogen ion concentration in the acid rain is 10 times higher than the hydrogen ion concentration in the rain which is naturally acidic.

More on acid rain can be found here: https://brainly.com/question/26775834

#SPJ1

Answer:

lalala

Explanation:

The balanced chemical equation is:

NaIO3 → NaCl + 1.5 O2

On the reactants side of the equation, there are:

- 1 Na atom

- 1 I atom

- 3 O atoms

Total number of atoms on the reactants side = 1 + 1 + 3 = 5

Therefore, there are a total of 5 atoms on the reactants side of the equation. This differs from the answer provided in the question (which says 7), which may be due to an error.

In the given chemical equation there is 1 reactant and thus the  total atoms  which are on the reactants side of the equation are 5.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

There is 1 reactant and thus the  total atoms  which are on the reactants side of the equation are 5.

Learn more about chemical equation,here:

https://brainly.com/question/28792948

#SPJ6

Answer:It is when two different chemicals bond together

Explanation:

Answer: Chemical bonding is the attraction between two or more atoms that allows them to be able to form a stable chemical compound.

Explanation: The specific nature of a chemical bond can vary, but the most commonly known are covalent and ionic bonds. With these bonds, it provides sufficient energy between atoms when one has less. It’s the force of attraction that holds atoms, allowing the electrons to form a bond together.

1. It is true that light always travels in a straight line

2. It is true that the amount of energy they carry is related to their frequency and their amplitude.

3. It is true that the higher the frequency of a wave, the more energy, and the higher the amplitude of a wave, the more energy.

A wave is an oscillation or disturbance that moves through a medium or space and transmits energy from one point to another without actually moving any physical objects.

Water waves, sound waves, light waves, and electromagnetic waves are just a few examples of the many varied shapes and settings in which waves can occur.

Learn more about waves:https://brainly.com/question/29334933

#SPJ1

The type of chemical reaction where two or more substances combine to form one substance is known as a synthesis reaction.

In a synthesis reaction, multiple reactants react with each other to produce a single product.

Synthesis reactions are characterized by the formation of new chemical bonds and the creation of a more complex compound from simpler substances. This reaction type is commonly observed in various chemical processes and natural phenomena.

The general equation for a synthesis reaction is:

A + B → AB

In this equation, A and B represent the reactants, while AB represents the product. The reactants can be elements, compounds, or a combination of both. When they combine, their atoms or molecules rearrange and bond together to form the product.

Synthesis reactions are essential for the formation of many substances. For example, the combination of hydrogen and oxygen through a synthesis reaction produces water:

2H₂ + O₂ → 2H₂O

Another example is the synthesis of sodium chloride (table salt) from sodium and chlorine:

2Na + Cl₂ → 2NaCl

Synthesis reactions are also prevalent in organic chemistry, where complex molecules are formed by combining simpler organic compounds.

Overall, synthesis reactions play a fundamental role in chemistry, contributing to the formation of new substances and the understanding of chemical processes.

Know more about   synthesis  here:

https://brainly.com/question/1502447

#SPJ11

The chemical reaction presented is appropriately balanced. The correct answer is:

CaO + 2SO2 = CaSO3 + O2.

Accordingly, 2 molecules of calcium sulfite (CaSO3) and 1 molecule of oxygen (O2) are formed for every reaction between 2 molecules of sulphur dioxide (SO2) and 2 molecules of calcium oxide (CaO).

The equation demonstrates that both sides of the reaction have the same amount and kind of atoms.An illustration of a redox (oxidation-reduction) process is this one. From the +4 oxidation state in SO2 to the +4 oxidation state in CaSO3, sulphur dioxide is being oxidised. While calcium oxide is being reduced from the +2 oxidation state in CaO to the +2 oxidation state in CaSO3, the opposite is happening.

The stoichiometry of the reaction, which denotes the proportions of reactants and products, is represented by the equation's balanced coefficients. Here, a reaction between two moles of SO2 and two moles of CaO results in two moles of CaSO3 and one mole of O2.

Learn more about Air Pollution at:

https://brainly.com/question/31023039

#SPJ1

The equations indicate that the rate of disappearance of Cl2 is half the rate of formation of ClF3, and the rate of disappearance of F2 is three times the rate of formation of ClF3.

The rate equation for the reaction between Cl2 and F2 to form ClF3 can be written in terms of the disappearance of Cl2 and F2 and the formation of ClF3. Let's denote the rate of disappearance of Cl2 as r1, the rate of disappearance of F2 as r2, and the rate of formation of ClF3 as r3.

Based on the stoichiometry of the reaction, we can write the balanced equation as:

Cl2 + 3F2 → 2ClF3

The rate expressions can be expressed as:

r1 = -d[Cl2]/dt

r2 = -d[F2]/dt

r3 = d[ClF3]/dt

The relationship between the rate expressions can be described by the reaction stoichiometry:

r1 = (1/2) r3

r2 = (3/2) r3

For more such questions on ClF3

https://brainly.com/question/16389816

#SPJ11

Answer:

Orbiter

Explanation:

Space shuttles are made out of three main parts: rocket boosters, a fuel tank, and orbiter (the part that resembles an airplane

The homologous series that CH₂CH₂ CH₂CH₂ belongs to is alkene.

Homologous series is any series of aliphatic organic compounds whose members differ only in the addition of a CH₂ group.

The members of the homologous series are as follows;

Alkene is an unsaturated, aliphatic hydrocarbon with one or more carbon–carbon double bonds.

According to this question, the above given compound is butene (a member of alkene) because it has four carbon atoms and 8 hydrogen atoms.

Learn more about homologous series at: https://brainly.com/question/30842881

#SPJ1

Esterification is the process that turned salicylic acid and acetic acid into acetylsalicylic acid.

Thus,  The process of creating esters from carboxylic acids is known as esterification. When a carbon is linked to two oxygen atoms, an ester results from one of the oxygens being double-bonded to the carbon while the other oxygen is linked to another carbon.

The letter "R" stands for a carbon chain in the following generic formula for an ester.

Esterification occurs when a carboxylic acid reacts with an alcohol. This reaction can only occur in the presence of an acid catalyst and heat. It takes a lot of energy to remove the -OH from the carboxylic acid, so a catalyst and heat are needed to produce the necessary energy.

Thus, Esterification is the process that turned salicylic acid and acetic acid into acetylsalicylic acid.

Learn more about Esterification, refer to the link:

https://brainly.com/question/31118260

#SPJ1

The heat capacity of the entire assembly is 4019.4 joules per degree Kelvin.

To calculate the heat capacity of the entire assembly, we need to consider the heat capacities of the metal parts and the oil separately, and then sum them up.

The heat capacity of the metal parts is given as 925.0 J/K. This means that for every 1 degree Kelvin (or Celsius) increase in temperature, the metal parts can absorb or release 925.0 joules of heat.

The oil has a specific heat of 2.814 J/g K. This means that for every 1 gram of oil and 1 degree Kelvin increase in temperature, it can absorb or release 2.814 joules of heat.

Given that there are 1100 grams of oil in the calorimeter, we can calculate the heat capacity of the oil as follows:

Heat capacity of oil = specific heat of oil × mass of oil

= 2.814 J/g K × 1100 g

= 3095.4 J/K

To find the heat capacity of the entire assembly, we sum the heat capacities of the metal parts and the oil:

Heat capacity of entire assembly = heat capacity of metal parts + heat capacity of oil

= 925.0 J/K + 3095.4 J/K

= 4019.4 J/K

For more such questions on capacity

https://brainly.com/question/29792498

#SPJ11

There are 6 sigma bonds in 1-chloro-1,3-pentadiene.

In 1-chloro-1,3-pentadiene, let's break down the structure to count the number of sigma bonds

The compound 1-chloro-1,3-pentadiene has the following structure:

Cl

H2C=C=CH-CH2-CH3

To count the sigma bonds, we examine each carbon atom and its attached atoms or groups.

Starting from the left side:

The first carbon (C1) is bonded to one hydrogen (H) atom and two other carbon atoms (C2 and C3) by sigma bonds.

The second carbon (C2) forms a double bond with the third carbon (C3), so they share one sigma bond and one pi bond.

The third carbon (C3) is also bonded to the second carbon (C2) and the fourth carbon (C4) by sigma bonds.

The fourth carbon (C4) is bonded to the third carbon (C3) and the fifth carbon (C5) by sigma bonds.

The fifth carbon (C5) is bonded to one hydrogen (H) atom and one methyl (CH3) group by sigma bonds.

for more questions sigma bonds

https://brainly.com/question/29828898

#SPJ8

The sentence that suggests that the container is an open system is option C: "The container contains 8 grams of liquid water and no ice."

In an open system, matter can freely enter or leave the system. In this case, if the container contains only liquid water and no ice, it indicates that some of the ice has melted and the resulting liquid water has escaped from the container. This suggests that matter (in the form of liquid water) has left the system, indicating an open system.

Option A suggests that the container contains 12 grams of liquid water and no ice, which implies that all of the ice has melted and the liquid water remains inside the container. This does not necessarily indicate an open system as the liquid water could still be contained within a closed system.

Option B suggests that the container contains 12 grams of ice and no liquid water, indicating that none of the ice has melted. This does not provide information about the system being open or closed.

Option D suggests that the container contains 8 grams of ice and 4 grams of liquid water, indicating that some of the ice has melted but the liquid water remains inside the container. This does not necessarily indicate an open system as the liquid water could still be contained within a closed system.

Option E suggests that the container contains 8 grams of liquid water and 4 grams of water vapor. This indicates a phase change from liquid to vapor, but it does not provide information about whether the system is open or closed.

for more such questions on container

https://brainly.com/question/30361079

#SPJ8

The new volume of the balloon after heating it to a temperature of 51 °C is approximately 2.39 L.

Charles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.

It is expressed as;

[tex]\frac{V_1}{T_1} =\frac{V_2}{T_2}[/tex]

Given that:

Substituting the given values and solve for V₂:

[tex]V_1T_2 = V_2T_1\\\\V_2 = \frac{V_1T_2}{T_1} \\\\V_2 = \frac{2.2\ *\ 324.15}{298.15 }\\ \\V_2 = 2.39 \ L[/tex]

Therefore, the final volume is 2.39 litres.

Learn more about Charles's law here: https://brainly.com/question/23122443

#SPJ1

Answer:

A

Explanation:

just do it